.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

bear429-F4
£6.95 (£8.34 inc VAT)
OEM: 57-1469
Gearbox Mainshaft Bearing - Triumph 350/500cc Unit Twins OD:  1+27/32" (47mm) ID:  21/32" (16.5mm) Width: 9/16" (13.9mm) OEM: 57-1469
+

gbox3258-B13
£1.45 (£1.74 inc VAT)
OEM: 40-3258, 57-2670, T2670
BSA/Triumph Gearbox Layshaft Thrust Washer/Shim - Unit Singles Circa 1965-72 As used on later  C15 models + C25, B25, B40, B44, B50, T250, TR25W models....
+

fk420spring
£2.95 (£3.54 inc VAT)
420 Regina Classic Motorcycle Chain Connecting Spring Link Split/master link for use with standard roller 420 motorcycle chain. Please note: These will...
+

fkrub28
£1.99 (£2.39 inc VAT)
Ariel Kickstart Rubber - open Suit Heavyweight Ariels - Open end Length: 3+3/8" Hole: 1/2"
+

fkrub32
£1.99 (£2.39 inc VAT)
Triumph Cub Kickstart Rubber Not Branded Open End. Hole size: 3/8" Length: 2+1/2"
+

clplt322-B24
£15.95 (£19.14 inc VAT)
OEM: 42-3119, 65-3857
BSA A7, A10 Swing Arm Models, and B models - Surflex Clutch Friction Plates Surflex 18-M-13 Inside Diameter: 106mm Outside Diameter: 153mm Stub Length:...
+

clplt336-B24
£11.95 (£14.34 inc VAT)
OEM: 29-3832, 65-3824
Clutch Steel Plates - BSA A7, A10 Swing Arm Models + B Models Surflex 18-M-14 Inside Diameter: 88mm (between stubs) Outside Diameter: 147mm Stub...
+

vvg421
£99.95 (£119.94 inc VAT)
OEM: 70-6301, 70-6853, 70-6854, E6301, E6853, E6854
Triumph Complete Valve Guide Set - T100, 100C, 100S Models Includes guides and valves suitable for 500cc models circa 1967-73. Valve guides: Set of 4...
+

clutch139-B23
£7.95 (£9.54 inc VAT)
OEM: 04-0386, 04-0387
Norton/AMC clutch cush drive rubber set Set of 6 cush drive rubbers rubbers  - three large and three small. OEM: 04-0386, 04-0387 Made in England
+

pist278r
£44.95 (£53.94 inc VAT)
OEM: R17350
Set of Hepolite Piston Rings for BSA A65 650cc models etc (1962-73). Supplied as Hepolite Rings for 2 Pistons. Bore Size : 75mm Standard, available as STD,...

nut0076-B14
£1.25 (£1.50 inc VAT)
OEM: W76, 37-0076
Triumph Twin - Cylinder Base Nut - W76 Also used in some pre-unit gearboxes OEM: W76, 37-0076
+

pipe5115-B2
£6.45 (£7.74 inc VAT)
OEM: 83-4122, 83-5114, 83-5115
BSA Breather Hose/Pipe - All B50 Models - 1969 onwards Attaches to the breather stub on your crankcase (primary side) Silver coloured round profile...
+

gk509
£1.99 (£2.39 inc VAT)
OEM: 42-7509
BSA A7, A10 Inner Chaincase Gasket - 42-7509 BSA Chaincase inner gasket. 500/650cc twins Gasket between the engine and primary chaincase. OEM: 42-7509
+

gk0241
£1.95 (£2.34 inc VAT)
OEM: 40-0241, 40-241
BSA Primary Case Back Plate Gasket - BSA C15, B25, B40, A50 & A65 Models Fits between the crankcase and the primary case back cover. OEM: 40-0241,...
+

bolt2603-E2
£2.95 (£3.54 inc VAT)
OEM: 82-2603, F2603
Triumph Side Stand Bolt / Manifold Carb Mounting Bolt - Reduced Head Reduced hex head bolt - correct fitment to mount the prop stand on pre unit models...
+

piston-rings-784
£35.95 (£43.14 inc VAT)
OEM: CP.99, CP99, E6864, E6865, 70-6864, 70-6865, E2897, 70-2897, E3049, 70-3049, E2898, 70-2898
Engine Set of Harris Piston Rings for Triumph 650cc models - TR6, 6T, T120 etc (1959-75). Supplied as 2 sets of Piston Rings = Top ring, 2nd Ring, Oil...

wash427-C4
£1.95 (£2.34 inc VAT)
OEM: 82-3069, F3069, 82-9092, F9092
Triumph Head Steady Spacer - Unit 650cc Models Circa 1963-70 Engine torque stay distance piece for 6T, T120 and TR6 models - 4 required. OD: 5/8" (16mm)...
+

oilseal40526
£4.95 (£5.94 inc VAT)
OEM: 40-0025, 40-25
BSA Crankshaft Oil Seal - Trials Models - Thin Type For Talon 18T Engine Sprocket Use in conjunction with the Talon 18T engine sprocket on BSA C15, C25,...
+

screw1647-B13
£2.95 (£3.54 inc VAT)
OEM: 70-1647, E1647
Triumph Crankcase Inner Boss Joint Screw - Pre Unit 350/500/650cc Models - Circa 1946-62 Correct fitment on pre unit 3T,  5T, T100, TR5, 6T, T110, TR6...
+

clutch3872-B23
£15.95 (£19.14 inc VAT)
OEM: 65-3872
BSA Clutch Back Plate - 6 Spring A, B, C and M Group Models - Circa 1946-62 Correct fitment on all BSA models fitted with a six spring clutch - A7, A10,...
+

kick3095-set-B4
£38.95 (£46.74 inc VAT)
OEM: 68-3095, 67-3169
BSA Kickstart Ratchet Pinion and Bush - A50 and A65 Models Circa 1962-72 20T kickstart pinion and bronze bush - correct fitment on all A50 and A65...
+

seal3395
£0.95 (£1.14 inc VAT)
OEM: 65-3395
BSA Speedometer Bush O Ring Sealing Washer - Early A50 / A65 Models Circa 1962-63 O ring rubber sealing ring - locates on the speedometer drive bush...
+

clutch1256-B23
£3.45 (£4.14 inc VAT)
OEM: 57-1256, T1256
Triumph Clutch Adjuster Pin - Unit 350/500/650cc Models Pre 1965 + T20 Tiger Cub Models Clutch pushrod adjuster screw - correct fitment on 3TA, 5TA and...
+

fkgk335-bsa
£24.95 (£29.94 inc VAT)
BSA Motorcycle - 250cc B25 Starfire, C25 Engine Gasket Set 1966-70 BSA B25 Starfire, BSA C25, 250cc Engine Gasket Set from 1966 to 1970 Includes gaskets as...
+

clutch1140-B23
£5.45 (£6.54 inc VAT)
OEM: 57-1140, T1140
Triumph Clutch Operating / Push Rod - T20 Tiger Cub Models From 1954 Onwards Hardened steel clutch operating rod - correct fitment on all T15 Terrier and...
+

o/feed2252-B13
£7.45 (£8.94 inc VAT)
OEM: 65-2252
BSA Crankcase Oil Pipe Union / Adaptor - A, B, C and M Group Models From 1940 Onwards Oil pipe adaptor union - from oil tank to crankcase. Correct...
+

gk4549
£2.95 (£3.54 inc VAT)
OEM: 70-4549, E4549
Triumph Rocker Box Gasket - 650cc Models Circa 1961-68 - Wire Inserts Rocker box to cylinder head joint washer without push rod holes. Correct fitment on...
+

fkgk334
£33.95 (£40.74 inc VAT)
BSA Motorcycle - 650cc A65 Twin (Copper Gasket) Engine Gasket Set 1967-70 BSA A65 650cc Gasket Set With Copper Cylinder Head Gasket 1967 to 1970 Includes...
+

headgk016
£15.95 (£19.14 inc VAT)
OEM: 71-3681, E13681
Triumph Cylinder Head Gasket 750cc Twins - 10 Hole - Standard or Extra Thick Solid copper cylinder head gasket as fitted to 10 stud T140 and TR7 models...

spr971H-B24
£1.95 (£2.34 inc VAT)
OEM: 57-4644
Triumph Clutch Spring, for Triumph T140, TR7 (1973-85) Clutch spring for 3 and 4 spring clutches. Length: 1+3/4" (45mm) Diameter: 21/32" (17mm) Price is...
+

pipe308-B3
£19.95 (£23.94 inc VAT)
OEM: 71-3550
Triumph T140, TR7 rocker oil feed pipe OEM: 71-3550
+

seal009
£1.95 (£2.34 inc VAT)
OEM: 68-0235
Gearbox Clutch Back Plate Oil seal for BSA A50/A65 (1962-73) Also fits some Triumph twins OEM: 68-0235, 68-235, E4578, 70-4578
+

piston3676
£104.95 (£125.94 inc VAT)
OEM: 71-3676
Harris Pistons for Triumph T140 750cc - 71-3676 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin, Ring set...

clutch357-B23
£35.95 (£43.14 inc VAT)
OEM: 57-2156, T2156, 57-4590, T4590, 68-3305
Triumph/BSA Billet Alloy Clutch Pressure Plate - 3 Spring - 3/8" Threaded Adjuster Correct fitment on 500/650/750cc twins from 1966 onwards including...
+

rub3259-B4
£3.95 (£4.74 inc VAT)
OEM: 66-3259
BSA Kickstart Quadrant Stop Rubber - 66-3259 Kickstart Return Stop Rubber. To suit many BSA Models including B31, B33, M21, M20 OEM: 66-3259
+

bolts1540-B19
£2.25 (£2.70 inc VAT)
OEM: 70-1540
Triumph Rocker Box Stud - Fits Rocker Box and Pre Unit Sump Plate Coarse thread to screw into the rocker box, and fine thread for the nut. OEM: 70-1540
+

stud2109-B19
£1.95 (£2.34 inc VAT)
OEM: 21-2109, S2109
Triumph /BSA Sump Plate Stud - OIF Models from 1971 Sump plate to frame stud 5/16" x 24TPI x 1" UNF OEM: 21-2109, S2109
+

conrod9525
£129.95 (£155.94 inc VAT)
OEM: 70-9525, E9525, 70-3606, E3606
Triumph Connecting Rod - All 650cc Unit Twins + Pre Unit 500/650cc Models From 1956 Onwards Forged alloy with steel connecting rod cap - supplied with...
+

clutch3263-E12
£3.45 (£4.14 inc VAT)
OEM: 68-3263
BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment and...
+

7-32-ball-F4
£0.25 (£0.30 inc VAT)
OEM: S70-7, 60-2363, D2363, 70-8019, E8019
7/32" Ball Bearing - Single Ball - Universal Use Diameter: 7/32" (5.6mm) As used in all standard dual or 4 valve oil pump assemblies on Triumph pre unit...
+

wash0645-B18
£2.45 (£2.94 inc VAT)
OEM: 67-0645, 67-645
BSA Crankshaft Timing Side Washer - A7 and A10 From 1947 Onwards + All A50 and A65 Models Locates between the timing pinion and the oil pump worm drive...
+

c/s-tube3999-B13
£9.95 (£11.94 inc VAT)
OEM: 70-3999, E3999
Triumph Crankshaft Sludge / Oil Tube - 350/500cc Unit Twins Circa 1959-74 Crankshaft oil tube, sludge trap - correct fitment on 3TA, 5TA and T100 models...
+

clutch0377-B23
£2.95 (£3.54 inc VAT)
OEM: 68-0377, 68-377
BSA Primary Chain Tensioner Adjuster Screw Cap Nut - BSA A50 and A65 Models Circa 1964-72 Threaded cap nut - locates on the bottom of the primary...
+

fkgk335-tri
£24.95 (£29.94 inc VAT)
Triumph TR25W, T25SS, T25T - 250cc Engine Gasket Set Triumph TR25W, Triumph T25SS and Triumph T25T 250cc Engine Gasket set - from 1967 to 1970 Includes...
+

filt063-BSA-B2
£6.95 (£8.34 inc VAT)
OEM: 19-4589
BSA B25, B25T, B25SS, B50 - (1971 on) Oil Filter Element Replacement paper oil filter element. Supplied with O ring. Available as standard or UK made -...

seal353t-B7
£12.95 (£15.54 inc VAT)
OEM: E4568, 70-4568, T1956, 57-1956, T3642, 57-3642, D3510, 60-3510, D3500, 60-3500, T3634, 57-3634, T3644, 57-3644
Oil Seal Set - Engine and Gearbox To suit Triumph T150, T160, 1968 - Contains: Contact point seal, Gearbox Seals (5 Speed Option x2), Gearbox final drive...
+

fkgk308
£19.95 (£23.94 inc VAT)
BSA Motorcycle - 350cc B31, B32 Competition Engine Gasket Set 1949-60 (No head gasket in this set) BSA B31, BSA B32 Competition, Engine Gasket Set from 1949...
+

fkgk312
£21.95 (£26.34 inc VAT)
BSA Motorcycle - 500cc B33, B34, M33 Engine Gasket Set 1947-60 (No head gasket in this set) BSA B33, BSA B34, BSA M33, 500cc - Engine Gasket Set from 1947 to...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.