.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

pinion3376-B4
£45.95 (£55.14 inc VAT)
OEM: 67-3376
BSA Kickstart Ratchet Pinion - A, B and C Group Models Circa 1954-62 17T kickstarter pinion as used on all A7, A10, C10L and C12 models circa 1954-62....
+

off-ren428-134
£49.95 (£59.94 inc VAT)
428 Renthal R1 MX Chain - Ideal For Trials/Motocross - 1/2" x 5/16" Standard Chain - 134 Links Top quality heavy duty non 'O' ring chain  designed...
+

stud1996-B19
£1.95 (£2.34 inc VAT)
OEM: 21-1996, S1996
Triumph Carburettor to Manifold Stud - Single Carb 650/750cc Unit Twins - 1968-82 Shouldered inlet manifold stud, correct fitment on TR6, and TR7 models....
+

circlip3028-B13
£1.95 (£2.34 inc VAT)
OEM: 67-3028
BSA Gearbox Mainshaft Bearing Circlip - Kickstart End - A, B and C Group Models Gearbox mainshaft bearing spring ring - kickstart end. Correct fitment on...
+

gearbox2595-B13
£2.95 (£3.54 inc VAT)
OEM: 57-2595, T2595, NT261
Triumph Gearbox Camplate Roller - Pre Unit 350/500/650cc + Unit 650/750cc Models - Circa 1946-70 Gearbox camplate gear control / selector fork roller -...
+

gk3763
£0.95 (£1.14 inc VAT)
OEM: 70-3763, E3763
Triumph Oil Junction Block Gasket - 350/500/650cc Unit Twins Circa 1959-70 - 3 Hole 4 hole version also available - see related products. OEM:  70-3763,...
+

tach0585-G15
£19.95 (£23.94 inc VAT)
OEM: 68-0585, 68-585
BSA Tacho Drive Adapter / Nipple - A50 and A65 Models Circa 1964-72 Alloy rev counter drive nipple - locates over the drive pin from the oil pump -...
+

gear-sw008-B4
£11.95 (£14.34 inc VAT)
OEM: 33906, 39184, 60-7240, 60-4508, 06-5390, 147SA
Triumph/Norton Neutral Gear Light Switch - Later 750cc Twins and Triples + Commando Models Genuine Lucas 147SA type neutral indicator switch with spade...
+

fkcap031-F2
£23.95 (£28.74 inc VAT)
OEM: 82-3216, F3216
2" Non-Vented Petrol or Oil Tank Filler Cap - Chrome Plated 2" fuel / oil cap without vent hole - push turn fit and integral cork seal. Will fit most...
+

boltset-alloy-head-B14
£27.95 (£33.54 inc VAT)
OEM: 67-1115, 67-1116, 67-283, 67-0283
BSA A7/A10 Alloy Head Cylinder Head Bolt Set - R, SR, SS Rocket, Super Rocket, SS, etc. 9 piece set. OEM: 67-1115, 67-1116, 67-283, 67-0283 Made in...
+

clplt272b-B24
£8.95 (£10.74 inc VAT)
OEM: 57-1362, 68-3267, 42-3262
BSA A50, A65 Clutch Friction Plates (4 Spring Clutch) Also some BSA A7/A10 models with 4 spring clutch Inside Diameter: 106mm Outside Diameter: 155mm Stub...
+

bearing205c-F4
£8.95 (£10.74 inc VAT)
OEM: 65-2045, T34
BSA Crankshaft Main Drive Side Ball Bearing - B and M Group Models Circa 1946-63 Outer drive side ball bearing - correct fitment on B31, B32, B33, B34,...
+

off-gsprk482-13
£16.95 (£20.34 inc VAT)
OEM: 90-0299, 90-299
BSA Bantam - 420 Chain Gearbox Sprocket - 13T or 14T - Talon Front sprocket suitable for BSA Bantam trials/competition models using standard 420 chain....
 

nut1877-B14
£0.45 (£0.54 inc VAT)
OEM: 21-1877, S1877
1/4" UNF Nut - Triumph Inlet Manifold to Head Nut - 650/750cc Unit Twins Circa 1969-82 + Universal Use Inlet manifold to head stud securing nut on T100,...
+

fkgk338
£32.95 (£39.54 inc VAT)
BSA Motorcycle - 650cc A65 Twin (Copper Gasket) Engine Gasket Set 1971-on BSA A65 650cc Engine Gasket Set with Copper Cylinder Head Gasket from 1971 on...
+

headgk532
£9.95 (£11.94 inc VAT)
OEM: 71-4619
Cylinder Head Gasket Triumph 750cc 10 Hole, Compound T140, TR7 750cc. OEM 71-4619
+

fkkick57-G3
£38.95 (£46.74 inc VAT)
OEM: 57-1438, 57-1485, T1438, T1485, 57-1677, T1677
Triumph Kickstart Lever  Early 350/500cc Unit Twins - Short Type Correct for 3TA, 5TA, T90 and T100 models from 1959-63 Can also be used on later 500cc...
+

valv870-B18
£5.95 (£7.14 inc VAT)
OEM: 70-6596
Triumph T150, T160 , 350/500/650cc Unit models (oil pressure release) Valve Cap Fits Most Triumph models OEM: 70-6596
+

gk-cg01
£11.95 (£14.34 inc VAT)
OEM: E1650, 70-1650, E1577, 70-1577, 70-1335, E1335, E3075, 70-3075, NA43, F1880, 82-1880
Triumph 5T, 6T Pre-unit Iron Head Rocker Box Gasket Set up to 1961 Comprises of 10 gaskets and several washers Includes 2 carb manifold gaskets, 1 is for...
+

sprock476-B5
£24.95 (£29.94 inc VAT)
OEM: 57-0471A
Triumph T120, T110, T6, 5T Pre Unit models (1947-62) Chain Pitch: 5/8" x 3/8" (530) Number of Teeth: 18 OEM: 57-0471A, T471A, T471A/18, 57-0471/18
+

bolt763-B19
£1.95 (£2.34 inc VAT)
OEM: 21-1875
Triumph High tensile bolt 1/4 x 1/4 UNC. Rockerbox corner bolt (1969-) OEM: 21-1875
+

engine2440-B13
£14.95 (£17.94 inc VAT)
OEM: 57-2440, T2440
Triumph Rotor Cover - 500/650/750cc Unit Twins Circa 1968-75 Cover for the primary chaincase front over the alternator. Correct fitment on T120, TR6,...
+

fkbrk112-C4
£7.95 (£9.54 inc VAT)
OEM: 70-4778, E4778
HEAD STEADY BRACKET - TRIUMPH Triumph Head Steady bracket for 500/650cc models. Note: These brackets have been stored loosely which has chipped the paint...
+

oilcap3463-B4
£10.95 (£13.14 inc VAT)
OEM: 71-3463, E3463
Triumph/BSA Oil Filler Cap with Dipstick - Unit Models from 1971-83 Complete dipstick assembly includes: zinc plated filler cap, dipstick and retaining...
+

seal3761
£0.75 (£0.90 inc VAT)
OEM: 37-3761, W3761
O Ring - Nitrile Seal - ID: 7/6", OD: 1/2" - Various Applications ID: 7/6" (10.8mm) OD: 1/2" (12.4mm) OEM: 37-3761, W3761
+

bolt0241-B19
£2.45 (£2.94 inc VAT)
OEM: 14-0241
Triumph T140, TR7 Cylinder Head Bolt - UNF Thread Length UH: 3+1/2" (88.6mm) Diameter: 3/8" UNF thread OEM: 14-0241
+

rings100
£37.95 (£45.54 inc VAT)
OEM: R13570
Pair of Hepolite Piston Rings for Triumph 500cc T100 Models Circa 1958-74 Supplied as 2 sets of Hepolite piston rings. Bore Size: 69mm standard,...

gk-3449
£1.45 (£1.74 inc VAT)
OEM: 29-3449
BSA Gearbox Inspection Cover Gasket - A, B Swinging Arm and 4 Speed C Group - Circa 1954-62 Correct fitment on A7, A10, B31, B32, B33, B34 swinging arm...
+

0.5mm-paper
£1.00 (£1.20 inc VAT)
Cellulose Paper Gasket Material - 0.5mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet General Properties - a cellulose fibre base...

stud2973-B19
£2.45 (£2.94 inc VAT)
OEM: 70-2973, E2973
Triumph Inlet Manifold Stud - Single Carb Pre Unit 500/650cc Twins + Unit 650cc Models Short inlet manifold to cylinder head stud. Correct fitment on...
+

chainMTX520
£19.95 (£23.94 inc VAT)
OEM: 110054
Gold Standard Heavy Duty 520 Motorcycle Chain - MTX - 116, 120 or 130 Links Supplied with a connecting spring link. 135RESR 5/8" x 1/4" (P x W)...

bearing0011-F4
£3.45 (£4.14 inc VAT)
OEM: 90-0011, 90-11, 70-8151, E8151
BSA Gearbox Mainshaft Bearing - 4 Speed C Group + Bantam Models and Unit Singles C10L and C12 4 speed models + Bantam D1, D3, D5, D7, D10, D14 and B175...
+

bush0400-B8
£5.95 (£7.14 inc VAT)
OEM: 70-0400, E400
Triumph Timing Gear Intermediate Wheel Bush - Pre Unit and Unit Twins - Circa 1946-1982 Correct fitment on all 350/500/650/750cc pre unit and unit twins...
+

nut2228-B13
£2.95 (£3.54 inc VAT)
OEM: 70-2228, E2228
Triumph Dynamo To Gear Case Domed Nut - Pre Unit 350/500/650cc Models - Circa 1946-59 Locates in the top right hand side of the timing case. Correct...
+

rocker006B-B4
£14.95 (£17.94 inc VAT)
OEM: 70-1564, E1564, 40-0968
Triumph Hexagonal Head Pre Unit Rocker Box Inspection Cap / Sump Plug - Unit 350/500cc Models Premium quality polished billet alloy with hexagonal head...
+

trun5977-B18
£1.45 (£1.74 inc VAT)
OEM: 70-5977, E5977
Triumph Primary Chain Tensioner Blade Trunnion - 500/650cc Models Circa 1966-73 + T150 Models Correct fitment on T90 and T100 models circa 1966-67 + T120...
+

bolt3809-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3809, E3809
Triumph Rocker Oil Feed Bolt - Unit 350/500cc Models Circa 1958-74 Oil feed pipe retaining bolt - correct fitment on 3TA, 5TA, T90 and T100 models from...
+

fkscrew209-B9
£15.95 (£19.14 inc VAT)
Stainless Steel Allen Screw Kit - BSA A50 and A65 Models From 1968 Onwards - UNC Threads Stainless steel UNC bolt set suitable for A50 and A65 models...
+

bear3292-B8
£3.95 (£4.74 inc VAT)
OEM: 40-3292, 70-8005, E8005
BSA/Triumph Layshaft / Kickstart Spindle Needle Roller Bearing - Unit Singles Circa 1965-71 Open ended needle roller bearing used on both the layshaft...
+

screw7178-E9
£3.95 (£4.74 inc VAT)
OEM: 24-7178
BSA Tank Knee Grip / Number Plate Mounting Screw + Gearbox Inspection Cover on Pre-Unit Models Used extensively on pre-unit and unit BSA models. Fuel...
+

wash3857
£0.25 (£0.30 inc VAT)
OEM: 70-3857, E3857
Triumph 1/4" Rocker Box Corner Bolt Washer - 350/500cc Models Circa 1959-71 Plain washer as used with the rocker box corner screws on 3TA, 5TA and T100...
+

fkgk805
£31.95 (£38.34 inc VAT)
Triumph Motorcycle - 650cc Thunderbird (Iron Head), TR6, TR110 (Pre unit) Engine Gasket Set 1949-55
+

bigend231-B3
£19.95 (£23.94 inc VAT)
BSA A10, A10SR, A10RR (1956-63) A50, A65 (1962-71) Large journal, Big End Shell Set. Glacier number B2046M. Size : Standard Set qty : 2 pairs OEM:...
+

bolt297-B19
£16.95 (£20.34 inc VAT)
OEM: 67-1536
BIG END BOLT - BSA A7, A10 500cc, 650cc OEM: 67-1536
+

rod191-B17
£15.95 (£19.14 inc VAT)
OEM: 70-4751, 70-4751A, E4751
Triumph Pushrod Tube - T90 and T100, 350/500cc Unit Models - Billet Alloy 70-4751 UK Made Billet Alloy push rod tube Triumph T90/T100 (1964-68) These...
+

valv250-B17
£16.45 (£19.74 inc VAT)
OEM: 68-0805, 68-0806, 71-1177, 68-0930
Valve Spring Set - BSA A65T, A65L etc (1966-72) (Terry no. VS 641) Includes 4 inner springs (71-1177) and 4 outer springs (68-0930). Made in England....
+

fkscrew208-B9
£14.95 (£17.94 inc VAT)
Stainless Steel Allen Screw Kit - BSA A50, A65 pre 1968 Suit BSA A50 and A65 pre 1968 models Complete Set, includes allen keys. Stainless Steel. (BSF threads)
+

kick1270-G3
£62.95 (£75.54 inc VAT)
OEM: 57-1270
Kickstart Lever Triumph Pre Unit - Short Folding Type Spindle hole id: 3/4" (19mm) As fitted to Triumph Pre-Unit Models TR5/TR6 Trophy up to 1962 Triumph...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.