.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

clutch553-B23
£1.95 (£2.34 inc VAT)
OEM: 57-2719, E9777
ROLLERS - Triumph/BSA/Villiers - 57-2719, 42-3206 Clutch Rollers for BSA and Triumph Unit singles. Also fits Villiers 9E,10E and 250cc A series...
+

piston9488
£99.95 (£119.94 inc VAT)
OEM: 70-9488, 70-6868
Harris Pistons for Triumph T120/TR6 650cc - 70-9488 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin, Ring...

wash2521-B13
£1.25 (£1.50 inc VAT)
OEM: 65-2521
BSA Engine Mainshaft Lock Washer - B31, A10, A7 ID for shaft size 7/8" OD: 1+9/16" Made in England OEM: 65-2521
+

dowel0989-B18
£1.55 (£1.86 inc VAT)
OEM: 57-0989, T989
Triumph Crankcase Timing Side and Gearbox Dowel - Various Models Hollow dowel as used on Triumph crankcases, gearbox cases, chain cases etc. Also some...
+

e-sprock3108-B9
£24.95 (£29.94 inc VAT)
OEM: 70-3108, E3108
Triumph Pre Unit Engine Sprocket - 500/650cc Models Circa 1953-61 Correct fitment on 5T, T100, TR5, T110, T120, TR6 and 6T models. Number of Teeth: 19T,...

bolt2982-B19
£2.45 (£2.94 inc VAT)
OEM: 70-2982, E2982
Triumph Rocker Box Corner Bolt - Pre Unit and Unit Alloy Head 500/650cc Models Circa 1952-68 Correct fitment on pre unit TR5 and T100 models circa...
+

spr1742-B24
£1.95 (£2.34 inc VAT)
OEM: 57-1742, T1742
Triumph Clutch Spring - Heavy Duty Type For T20 Tiger Cub Models From 1964 Onwards Correct fitment on T20, T20SS, T20SH and T20SM models from 1964...
+

seal137-E-C13
£2.25 (£2.70 inc VAT)
OEM: 97-1168, H1168
Triumph Engine Oil Seal - Triumph Pre Unit Twins - Circa 1957-62 Crankshaft drive side oil seal. Also fits Tiger Cub T20 final drive. OD: 1+5/8"...
+

fkgk826
£42.95 (£51.54 inc VAT)
OEM: E3730, 70-3730, E4919, 70-4919, E7563, 70-7563, E1670, 70-1670, E-3751, 70-3751, E9348, 70-9348, E6309, 70-6309, E4547, 70-4547, E7310, 70-7310, E5049, 70-5049, T1770, 57-1770, E3832, 70-3832
Triumph - 650cc Trophy TR6, Bonneville, T120 Engine Gasket Set 1969-70 9 stud head. Set contains the following gaskets: Rocker Box x2, Cylinder Head,...
+

box078-G15
£46.95 (£56.34 inc VAT)
OEM: 19-9217, 19-2225, 06-0627, 60-0637, 99-9994, E637, E627
Speedometer Gearbox, Ratio 15:12 Suit Models fitted with Magnetic type speedo after 1966. Wheel spindle hole: 3/4" (19mm) Gearbox drive hole: 2"...
+

clutch468-B20
£52.95 (£63.54 inc VAT)
OEM: 57-1570
Triumph Clutch Chainwheel - 5TA, T100, T110, 6T, T120, TR6 From 1960-74 Number of Teeth: 58T Chain Type: Duplex OEM: 57-1570, T1570
+

sump221-B3
£26.95 (£32.34 inc VAT)
OEM: 67-1285, 67-1286
BSA Sump Plate - A7, A10, A50, A65 Models Finned alloy sump plate with magnetic drain plug. Supplied with gasket, magnetic sump plug and washer. Sump...
+

rings035
£35.95 (£43.14 inc VAT)
OEM: R26490
Pair of Hepolite Piston Rings for Triumph T140/TR7 750cc models (1972-). Supplied as 2 set of Hepolite Piston rings. Bore Size : 76mm Standard, available...

bear347-F4
£31.95 (£38.34 inc VAT)
OEM: 70-1591, E1591, 67-1240
BSA/Triumph Crankshaft Main Bearing BSA A75 Rocket 3 D/S Triumph T120 Crankshaft T/S (Imperial), T150/T160 Trident Crankshaft D/S (1969-75). BSA A50, A65...

valv256-B17
£15.95 (£19.14 inc VAT)
OEM: 70-4011, 70-5946, E4011
Valve Spring Set - Triumph 350/500cc Unit Models - 1966 Onwards Correct fitment on 3TA, T90, 5TA and T100 models circa 1966-73. OEM: 70-4011,...
+

nut569-B18
£6.95 (£8.34 inc VAT)
OEM: 29-2023, 29-2053
Crankshaft Alternator Nut for BSA C11/C15/B31/B44/B50/A50/A65 Crankshaft Alternator Nut for BSA C11/C15/B31/B44/B50/A50/A65 models. 5/8" CEI thread....
+

pillarbolt513-B19
£1.95 (£2.34 inc VAT)
OEM: 40-0683, 70-4747
Contact breaker pillar bolt. To secure the contact points set on side points models, also secures the points cover. Fits BSA C15/B44/B50 and Triumph...
+

bear0670-F4
£24.95 (£29.94 inc VAT)
OEM: 67-0670
BSA A7 and BSA A10 Crankshaft bearing Drive Side. To suit BSA models including Shooting Star, Gold Flash, Rocket, Road Rocket, R130L. Also fits Ariel 650cc...
+

kick1167-B4
£0.85 (£1.02 inc VAT)
OEM: 40-3085, 57-1167, T1167
Triumph/BSA - Folding Kickstart Pedal Locating Spring - Various Models Fits many BSA and Triumph singles and twins -  B25, B40, B44, B50, T20, T90, A50,...
+

camshaft3134-B7
£69.95 (£83.94 inc VAT)
OEM: 70-3134, E3134, 71-1063, E11063, 70-4819, E4819
Triumph Inlet Camshaft - Unit 650cc Models from 1963-72 + Pre Unit 650cc to 1962 To suit many Triumph 650cc models - T120, T120R, TR6 etc Nitrided...

kick2764-T
£119.95 (£143.94 inc VAT)
OEM: 57-2764
BSA Trials Kickstart Lever - Unit Singles + A Group Models - Heavy Duty Folding Type With Wide Bend Heavy duty kickstart crank assembly for use on...
+

wash3300-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3300, E3300
Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82 Locates between the right hand main bearing and timing...
+

pist-16945
£39.95 (£47.94 inc VAT)
OEM: 40-0970, 70-7998, E7998, 16945
Hepolite Piston - BSA/Triumph Unit Singles - B25, C25, TR25 Models Circa 1967-71 Suitable for 250cc singles with the square alloy barrel - B25, C25 and...

kick1281-B4
£2.95 (£3.54 inc VAT)
OEM: 57-1281, 40-3025, T1281
Triumph/BSA Kickstart Pawl - T20 Tiger Cub Models Circa 1955-67 + C15 and B40 Models Circa 1959-64 Kickstarter spindle pawl - correct fitment on T20...
+

sprock425-B10
£27.95 (£33.54 inc VAT)
OEM: 57-1918
Triumph TR6, T120 etc 1963-74, T150 1969-72 4 speed Gearbox Sprocket 19T Chain Pitch: 5/8" x 3/8" (530) Number of Teeth: 1 OEM: 57-1918, T1918
+

tapp9353-B13
£29.95 £19.95 (£23.94 inc VAT)
OEM: 70-9353
Triumph 500cc, 650cc, 750cc, T100, T120, T140 exhaust tappet guide block. OEM: 70-9353
+

gearbox3660-B13
£8.95 (£10.74 inc VAT)
OEM: 57-3660, T3660, T44, 68-0098, 68-98, 57-0260 57-4308
Triumph/BSA 4 Speed Gearbox Camplate Index Plunger - Pre-Unit & Unit Models Correct fitment for BSA A50 & A65 models + 650/750cc Triumph Unit...
+

stud2962-B13
£1.95 (£2.34 inc VAT)
OEM: 70-2962, E2962
Triumph - Inlet Manifold To Carburettor Stud - 500/650cc Twins from 1952-69 Length: 1+1/4" (32mm) Diameter: 5/16" (7.7mm) BSW/CEI threads OEM:...
+

nut0702-B14
£1.45 (£1.74 inc VAT)
OEM: 14-0702
Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...
+

sumpgkt0111
£1.45 (£1.74 inc VAT)
OEM: 40-0111, 40-111
BSA Sump Plate Gasket - C15 and B40 Models Circa 1959-65 Usually two gaskets required, one each side of the gauze filter. Made in England OEM:...
+

tab-0685-B18
£0.95 (£1.14 inc VAT)
OEM: 67-0685, 67-685
BSA Camshaft Pinion Tab Washer - A7, A10, A50 and A65 Models Camshaft pinion lockwasher - correct fitment on A7 and A10 models circa 1947-62. Also used...
+

wash8896
£0.45 (£0.54 inc VAT)
OEM: 70-8896, E8896
Triumph/BSA Timing/Tacho Drive Plug Alloy Washer - Unit Singles and Twins From 1968 Onwards Crankcase timing aperture plug and/or tacho drive plug alloy...
+

wash2288
£0.35 (£0.42 inc VAT)
OEM: 70-2288, E2288
Triumph 3/8" Serrated Lock Washer - T140 Brake Hose / Flywheel + Various Uses Shakeproof serrated lock washer as used on many pre unit and unit Triumph...
+

wash3302
£0.25 (£0.30 inc VAT)
OEM: 70-3302, E3302, 75-0214, 75-214, S21/91
Triumph / BSA - 1/4" Thin Plain Washer - Various Uses on Unit Models As used on various unit models - rocker box studs, engine shields + universal use as...
+

seal3391
£1.95 (£2.34 inc VAT)
OEM: 70-3391, E3391, 40-0180, 40-180
Triumph/BSA Push Rod Tube Seal - Bottom - T20 Tiger Cub + C15 Models Circa 1954-67 Lower push rod tube oil joint washer as used on all T15 and T20 models...
+

fkgk320C
£44.95 (£53.94 inc VAT)
BSA Motorcycle - 650cc A10 Golden Flash (Copper Head Gasket) Engine Gasket Set 1950-63
+

fkgk812
£34.95 (£41.94 inc VAT)
Triumph Motorcycle - 650cc T110, TR6 S/S Engine Gasket Set 1956-62
+

nut066M-B14
£2.95 (£3.54 inc VAT)
OEM: 67-1537
BIG END NUT - BSA A7, A10 500cc, 650cc Connecting rod, con rod, con-rod, big end nut, bearing shell nut. OEM: 67-1537
+

bear836-F4
£15.95 (£19.14 inc VAT)
OEM: 60-4167, 01-7822, 70-3835
Triumph 3TA, T21, T90 350cc Unit twins Crankshaft D/S Triumph 5TA, T100, TR5 500cc Unit twins Crankshaft D/S (ball race up to 1967) Triumph T120, TR6, 6T...
+

valve2900
£9.45 (£11.34 inc VAT)
OEM: E2900, 70-2900, G424
Triumph Exhaust Valve Guide - Pre Unit 500/650cc Models Circa 1946-66 - Standard or Oversize Correct fitment on 5T models circa 1946-59,  TR5 models...

gask2612
£1.45 (£1.74 inc VAT)
OEM: 65-2612
BSA Crankcase Sump Scavenger Gasket - 65-2612 Used on BSA B and M models, such as B31, B33, M20, M21 etc OEM: 65-2612
+

spring152-B24
£1.99 (£2.39 inc VAT)
OEM: 66-3800
BSA Clutch Spring - 6 Spring version - 66-3800 BSA Clutch spring for Six spring clutches as fitted to BSA A, B and M Group models including :- A7, A10...
+

seal255
£2.45 (£2.94 inc VAT)
OEM: T1478, 57-1478
Gearbox Final Drive OIL SEAL - Triumph - 57-1478 Gearbox High gear Oil seal for Triumph 3TA/5TA/T90/T100 350/500cc (1957-72), T100/TR5T 500cc (1972-74)...
+

gask2226
£0.95
OEM: 70-2226, E2226
Dynamo Gasket - Cork - 70-2226 Cork gasket between dynamo and timing gear case OEM: 70-2226, E2226
+

gear3171-B8
£39.95 (£47.94 inc VAT)
OEM: 67-3171, 42-3010, 65-3417, 65-3380
BSA Gear Lever - Long Type - A, B, C and M Group Models Circa 1938-54 Dog-legged gear change lever - as fitted to many models rigid, plunger and swinging...
+

fkgk3552
£1.95 (£2.34 inc VAT)
OEM: 70-3552, E3552
Triumph Rocker Box Gasket - Pre Unit 650cc Alloy Head Models Circa 1956-62 Joint washer for alloy head models. Correct fitment on T110, T120 and 6T models...
+

rocker2079-B4
£1.95 (£2.34 inc VAT)
OEM: 71-2079, E12079
Triumph Rocker Box Inspection Plug - 500/650cc Unit Twins From 1971 Onwards Threaded alloy tappet access cap - correct fitment on T100, T120 and TR6...
+

clplt1315-B24
£7.45 (£8.94 inc VAT)
OEM: 57-1315, T1315
Triumph T20 Tiger Cub Clutch Driven/Steel Plate - All Models From 1954 Onwards Plain steel driven plate as used on all T15 Terrier and T20 Tiger Cub...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.