.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

pump-mor-13
£89.95 (£107.94 inc VAT)
OEM: 70-3072, E3072, GS326
Triumph Plunger Type Oil Pump - Pre Unit Models Circa 1949-62 - Made in England by Morgo A high performance dual plunger oil pump for pre unit 3T, 5T,...
+

clip238H-B18
£1.45 (£1.74 inc VAT)
OEM: 70-4671, E4671
Triumph Unit models Rocker cover inspection Cap Spring Retaining Clip OEM: 70-4671, E4671
+

gkt999
£2.45 (£2.94 inc VAT)
OEM: 67-3346
BSA A10, A7 etc - Inner Gearbox Gasket OEM: 67-3346
+

domenut1531-B13
£2.95 (£3.54 inc VAT)
OEM: 97-1531, H1531
Triumph Primary and Gearbox Cover Dome Nut - Unit 650cc Models Circa 1963-68 Chrome plated acorn nut used to secure both the primary chaincase cover and...
+

clutch6283-B18
£12.95 (£15.54 inc VAT)
OEM: 70-6283, E6283
Triumph Primary Chain Tensioner Blade - 350/500cc Unit Twins Circa 1961-74 Primary chain tensioner blade suitable for 3TA, T90, 5TA and T100 models. For...
+

fkgk828
£42.95 (£51.54 inc VAT)
OEM: E3730, 70-3730, E4675, 70-4675, E7563, 70-7563, E6772, 70-6772, E8771, 70-8771, E3751, 70-3751, E7310, 70-7310, E3798, 70-3798, E9511, 70-9511, E4156, 70-4156, E3832, 70-3832
Triumph Motorcycle - 500cc T100T S/S, T100S, Tiger 100 Engine Gasket Set 1970-73 Set contains the following gaskets: Rocker Cover x2, Cylinder Head,...
+

fk520half
£5.45 (£6.54 inc VAT)
520 Regina Classic Motorcycle Chain Half Link To fit 135RESR 5/8" x 1/4" (P x W) standard 520 chain equivalent to Renold 110054. Allows you to make up...
+

kick016-G3
£38.95 (£46.74 inc VAT)
OEM: 04-0434, 040434, 04.0434
Folding Kickstart Lever - Norton + AMC Heavyweight Singles and Twins Chrome plated kickstart lever assembly - folding type with crank, pedal, clamping...
+

push4746
£1.05 (£1.26 inc VAT)
OEM: 70-4746
Triumph Push Rod Steel Washer Steel cup, T90, T100, T120, T140, T150 OEM:  70-4746
+

gearbox0373-B18
£1.95 (£2.34 inc VAT)
OEM: 57-0373, T373
Triumph Gear Change Selector Index Plunger Spring - 350/500/650cc Length (uncompressed) 2+1/2" (63.5mm) OD: 5/16" (8.2mm) OEM: 57-0373, T373
+

shim0671-B18
£6.95 (£8.34 inc VAT)
OEM: 67-0671, 67-671, 67-672, 67-677, 67-0672, 67-0677
BSA Crankshaft Shim Set - A10, A7 ID: 1+1/4" (31.5mm) OD: 1+11/16" (42.2mm) 2x 0.001" 2x 0.005" 1x 0.010" Made in England OEM: 67-0671, 67-671, 67-672,...
+

pillarbolt7680-B13
£1.95 (£2.34 inc VAT)
OEM: 70-7680, E7680
Triumph/BSA Contact Breaker Pillar Bolt - Various Models To secure the contact points set on side points models, also secures the points cover. Correct...
+

shim0066-B18
£6.95 (£8.34 inc VAT)
OEM: 40-0065, 40-0066, 40-0069, 40-66, 40-69
BSA Crankshaft Shim Set - Unit Singles - C15, B25, B40, B44, B50 Also used to shim between the alternator and crankshaft on A50 and A65 models. Set of 5...
+

bush0023-B4
£8.95 (£10.74 inc VAT)
OEM: 57-0023, T23
Triumph Kickstart Spindle Outer Bush - 350/500/650cc Pre Unit + 650/750cc Unit Models Gearbox outer cover bush that supports the kickstart shaft. Correct...
+

bigend211-B3
£18.95 (£22.74 inc VAT)
OEM: 70-3586, B2026M, E3586
Triumph Big End Bearing Shells Pre Unit and Unit 650cc Models + T140 and TR7 - 010 Triumph T120/TR6 (1956-75), T140/TR7 (1973-) Big End Shell Set. Also...
+

kick352
£1.75 (£2.10 inc VAT)
OEM: 57-1956
Oil Seal for the Kick Start Shaft - Fits Triumph 650cc and 750cc Models Triumph T120/TR6 - 1963-1974 T150/T160 - 1968 onwards OEM: 57-1956
+

smallend134-B8
£12.95 (£15.54 inc VAT)
OEM: 6-0492, SE13
BSA Singles Small End Bearing - 66-0492 B31, B32, B33, B34, B40, SS90, B44, B50, M33, M22, M23, M24 (1937-66) Small end bush, piston pin bush, gudgeon pin...
+

washer3164-B4
£1.00 (£1.20 inc VAT)
OEM: 67-3164, 68-3301
Kickstart Lock Washer - BSA - 67-3164 BSA Kickstart lockwasher - tab washer, tab lockwasher OEM: 67-3164, 68-3301
+

clutch3910-B18
£12.95 (£15.54 inc VAT)
OEM: 65-3910
BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch Clutch bearing set of inner bearing race with ball bearings...
+

wash0644-B18
£1.25 (£1.50 inc VAT)
OEM: 67-0644, 67-644
BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards Half time pinion lockwasher as used on all A50 and A65 models from...
+

gk2894
£1.95 (£2.34 inc VAT)
OEM: 70-2894, E2894
Triumph Cylinder Base Gasket - 500/650cc Pre Unit + 650cc Unit Models Circa 1950-65 Cylinder base washer -  correct fitment on pre unit T110, 6T, T120...
+

renold-530/half-link-B12
£5.95 (£7.14 inc VAT)
530 Renold Classic Motorcycle Chain Half Link - 136SR 5/8" x 3/8" Double cranked link to fit Renold 136SR 5/8" x 3/8" (P x W) standard 530 standard...
+

seal359-B7
£7.95 (£9.54 inc VAT)
OEM: 70-4568, 70-3379, 97-1168, E4568, E3379, H1168
Oil Seal Set - Engine and Gearbox - Triumph T20 Tiger Cub Models - 1963 Onwards Suitable for T20 Tiger Cub models circa 1963-1967. Kit contains: side...
+

pmp223
£239.95 (£287.94 inc VAT)
OEM: 65-2589, 65-2619
BSA Oil Pump Assembly - Pre Unit Singles - B, C and M Group Models Circa 1940-62 Complete oil pump suitable for B31, B32, B33, B34, M20, M21 C10L,...
+

gkch015
£2.95 (£3.54 inc VAT)
OEM: 70-7856
Primary Chaincase Gasket - BSA B44 (1968-70), B25, C25, B50 , Triumph TR25W, T25, B25, C25 This is for SOME models, please see our other gasket gkch004 for...
+

bush3988-B13
£2.95 (£3.54 inc VAT)
OEM: T3988, 57-3988, PT108B
Triumph Gearbox Mainshaft Clutch Push Rod Bush Triumph Gearbox Mainshaft Clutch Rod Bush Sleeve that fits inside the shaft, to support the clutch push...
+

kick50-G3
£39.95 (£47.94 inc VAT)
OEM: 57-3797, T3797, 57-4760, T4760
Triumph Kickstart Lever Assembly - Unit 350/500cc Twins Circa 1968-74 - Longer Type Correct fitment on later T90 and T100 models from 1968-74. Tiger...
+

studset426-B14
£9.95 (£11.94 inc VAT)
OEM: 70-2980, E2980, 31-0222, 70-8012, 70-3302, 82-0879, F879
Triumph Rocker Box Stud and Nut Set - 650cc Unit Models Circa 1963-70 Rocker box to cylinder head - six studs, washers and nuts. Correct fitment on 650cc...
+

fkgk3743
£2.85 (£3.42 inc VAT)
OEM: 70-3743, E3743
Triumph Rocker Box Gasket - 350/500cc Unit Models Circa 1958-68 Original type rocker box gasket without the pushrod holes, as used on earlier 3TA, T90,...
+

seal0948
£1.25 (£1.50 inc VAT)
OEM: 57-0948, T948
Gearbox Speedo Drive Shaft Square O Ring - Triumph Pre Unit 500/650cc Models From 1949-62 Square section rubber sealing ring / speedo drive plug - locates...
+

nut2922-B14
£1.95 (£2.34 inc VAT)
OEM: 70-2922, 70-1530, E2922, E1530
Conrod Big End Nut - Triumph Pre Unit and Unit 250/500/650cc Singles and Twins - Circa 1946-70 Self locking connecting rod nut - correct fitment on pre...
+

tappet3059R-LFH
£39.95 (£47.94 inc VAT)
OEM: 71-7008, 70-3059, E17008, E3059, 70-3059R, 71-7644, E3059R, E17644
Triumph Cam Follower Tappet - 500/650/750cc Pre Unit and Unit Models - Exhaust and Inlet Single cam follower, sits in the tappet block and follows the...
 

kick972-B4
£4.95 (£5.94 inc VAT)
OEM: 57-1441
Triumph T90/T100 350/500cc Kick Start Return Spring Fits all Triumph Twin Unit Construction 350/500cc Models from 1957-1974. OEM: 57-1441
+

fkpipe035
£0.95 (£1.14 inc VAT)
Breather / Overflow Hose - 3.5mm Bore, 6mm Diameter - Black Rubber Carburettor overflow or breather pipe - s uitable for low pressure uses only. OD: 6mm...
+

bolt1872-B13
£2.95 (£3.54 inc VAT)
OEM: 21-1872, S1872
Triumph Timing Plug / Sump Plate Drain Bolt - Unit Singles and Twins from 1968 Onwards Timing aperture plug - correct fitment on various models...
+

capNT367-B4
£13.45 (£16.14 inc VAT)
OEM: NT367, 99-3544
Triumph Primary Chaincase Filler/Inspection Cap - Pre Unit Models Circa 1939-62 Cast alloy chaincase oil filler plug embossed with 'USE LIGHTOIL -...
+

plug5343-B13
£1.95 (£2.34 inc VAT)
OEM: 82-5343, F5343
Triumph Oil Tank Drain Plug - Unit Pre OIF Twins and Triples From 1963 Onwards Oil tank drain plug as used on pre OIF unit T100, T120, TR6, T150 models....
+

plug1112-B18
£4.95 (£5.94 inc VAT)
OEM: 57-1112, T1112
Triumph Gearbox Oil Drain and Level Plug - Unit 350/500/650cc Models Circa 1959-68 Correct fitment on 3TA, 5TA, T90, T100 models circa 1959-74 + 6T, T120...
+

clutch0861-B23
£0.65 (£0.78 inc VAT)
OEM: 68-0861, 68-861
BSA Primary Chain Tensioner Screw Oil Seal Washer - A50 and A65 Models Circa 1965-72 Oil seal washer with rubber insert, locates over the adjuster screw -...
+

fkchainsss415
£11.95 (£14.34 inc VAT)
OEM: 112045
415 Standard Classic Motorcycle 90R 1/2" x 3/16" Chain - Triple SSS - 120 Links Supplied with a connecting spring link. 90R 1/2" x 3/16" (P x W) standard...
+

520-reg-spring
£4.45 (£5.34 inc VAT)
520 Regina Classic Motorcycle Chain Connecting Spring Link Split/master link for use with standard roller 520 motorcycle chain. Premium quality - Made...
+

rocker010-B4
£16.95 (£20.34 inc VAT)
OEM: 70-4610
Chrome Triumph Rocker Cover Caps - set of 4 Suitable for Triumph. Unit Triumph. Complete with washers. Thread diameter approx 1+3/16" (30mm) OEM: 70-4610
+

valv570ss-B18
£39.95 (£47.94 inc VAT)
OEM: 71-3447, E5896, 70-5896
Oil Pressure Release Valve Fits Triumph T140 Bonneville motorcycle Can be used in some other models also Stainless Steel (Made in UK) OEM: 71-3447, E5896,...
+

clplt321-B24
£13.95 (£16.74 inc VAT)
OEM: 67-3242, 29-3476
BSA A7, A10, B31, B33, C10L, C11G, C12 Plunger Models Surflex Clutch Friction Plates Surflex - 18-M-12 Inside Diameter: 92mm Outside Diameter: 144mm...
+

pmp202H-B18
£69.95 (£83.94 inc VAT)
OEM: 70-9421, 70-3878, 70-6928, E9421, E3878, E6928
Triumph Unit Oil Pump - UK Made Dual plunger Triumph engine oil pump for 350cc, 500cc, 650cc and 750cc unit twins including: 3TA, 5TA, T90, T100, TR6,...
+

rings037
£35.95 (£43.14 inc VAT)
OEM: R11050, E6864, E6865, 70-6864, E6865
Pair of Hepolite Piston Rings for Triumph T120 650cc models etc (1959-75). Supplied as 2 set of Hepolite Piston Rings. Bore Size : 71mm Standard, available...

spann124
£15.95 (£19.14 inc VAT)
Tube spanner for Triumph 4 speed sprocket nut 1+3/4" Measures 44mm across inside flats. Sometimes it's the only way to get to the sprocket nut! OEM: 61-6061
+

bear019-F4
£23.95 (£28.74 inc VAT)
OEM: 24-0724, 70-9974, 27-724, 24-724
Crankshaft Bearing BSA C15/B40 T/S - 1967 onwards. C25/B25/B44 T/S and D/S - Roller Type - 1967 onwards. B31/B33/B34 D/S (1946-59), B50 T/S & D/S -...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.