.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

plug4154-B13
£1.95 (£2.34 inc VAT)
OEM: 70-4154, E4154
Triumph Primary Chaincase Drain Plug - 350/500cc Unit Twins from 1961-68 Primary cover oil drain plug with right hand thread. Correct fitment on unit 3TA,...
+

c/cable3475-B18
£2.95 (£3.54 inc VAT)
OEM: 70-3475, E3475
Clutch Cable / Outer Gearbox Cover Grommet - Triumph Unit 350/500cc Models Circa 1958-63 Rubber grommet locates on the top of the outer gearbox casing to...
+

seal3168
£0.45 (£0.54 inc VAT)
OEM: 68-3168, 57-2697, T2697
O Ring Nitrile Seal - ID: 1/2", OD: 5/8", Width: 1/16" - Various Applications Various uses on BSA/Triumph models including drain plug seal on some...
+

gk9511
£3.95 (£4.74 inc VAT)
OEM: 70-9511, E9511
Triumph Rocker Box Gasket - 350/500cc Unit Twins Circa 1969-74 Rocker box joint washer - correct fitment on T90 and T100 models from 1969 onwards. Two...
+

clutch1645-B23
£2.95 (£3.54 inc VAT)
OEM: 57-1645, T1645
Triumph Clutch Cable Abutment Adaptor / Ferrule - Unit Twins Circa 1961-71 + T150 Models Short type slotted ferrule for use with a standard clutch cable...
+

clutch3822-B18
£1.95 (£2.34 inc VAT)
OEM: 65-3822
BSA Clutch Centre / Mainshaft Nut Locking Washer - 6 Spring Clutch A, B, M and C Group Models Mainshaft nut locking washer as used on six spring A7,...
+

fkgk332
£31.95 (£38.34 inc VAT)
BSA Motorcycle - 440cc Victor, B44, B40G Engine Gasket Set 1964-70
+

regina428
£43.95 (£52.74 inc VAT)
OEM: 110046
428 Regina Classic Motorcycle Chain - 126SR 1/2" x 5/16" - 100 to 130 Links Supplied with a connecting spring link. 126SR 1/2" x 5/16" (P x W) standard...

box076p-G15
£41.95 (£50.34 inc VAT)
OEM: 60-3213, 60-7091, 99-9990
Speedometer Gearbox, Ratio 1.25:1 Suit Models fitted with Magnetic type speedo after 1966. Wheel spindle hole: 5/8" (16mm) Gearbox drive hole: 2"...
+

fktach539-H-G15
£49.95 (£59.94 inc VAT)
OEM: 71-7011
Tacho Gearbox - Triumph T140/TR7, T120 etc Tachometer Gearbox 2:1 To fit Triumph T140 TR7 1975-83, also T120, TR6 Takes a SPADE cable end LEFT...
+

bear6204
£3.95 (£4.74 inc VAT)
OEM: 37-0653, 06-5541, 42-5819
Ball Bearing 6204-2RS Range of uses including wheel bearing, transmission and engine bearing. OD: 47mm ID: 20mm Width: 14mm OEM: 37-0653, 06-5541, 42-5819
+

1.5mm-cork
£3.00 (£3.60 inc VAT)
Nitrile  Cork Gasket Material - 1.5mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet Nitrile bonded cork has good oil resistance, is...

vguide3827
£11.95 (£14.34 inc VAT)
OEM: 70-3827, E3827, G420PB
Triumph Inlet Valve Guide - T120 Bonneville Models Circa 1959-72 - Standard or Oversize Length: 1+31/32", 1.97" (50.1mm) Available as standard, +.002...

camshaft-9989-B7
£69.95 (£83.94 inc VAT)
OEM: 70-9989, E9989, 70-5048, E5048
Triumph 650cc Exhaust Half Race Camshaft - 70-9989 To suit Triumph 650cc motorcycles Triumph T120, T120R, TR6 etc Nitrided Camshaft, Quality Product. OEM:...

pipe4813
£9.95 (£11.94 inc VAT)
OEM: 83-4813, F14813
Triumph 'D' Type Crankcase Breather Hose/Pipe - T140/TR7 - 1974-78 This hose runs along the rear mudguard after the 'T' piece As fitted to 750cc T140/TR7...
+

kick1390-B4
£2.45 (£2.94 inc VAT)
OEM: 57-1390, T1390
Kickstart Stop Plate and Anchor Screw - Triumph T15, T20 + 350/500cc Unit Models Circa 1958-73 Correct fitment on Triumph T15 Terrier, T20 Tiger Cub,...
+

clutch3911-B18
£22.95 (£27.54 inc VAT)
OEM: 65-3911
BSA Clutch Inner Bearing Race - 6 Spring Clutch - A Group Swinging Arm + B/C/M Group Models Clutch inner bearing twin track race with two grooves. OD:...
+

gkch5037a
£2.95 (£3.54 inc VAT)
OEM: 025037, 02-5037
Primary Chaincase Gasket - AJS. Matchless, 20, 31, G11, G12 - 025037 Paper Chaincase Gasket Joint Washer OEM: 025037, 02-5037
+

piston-rings6893/4
£37.95 (£45.54 inc VAT)
OEM: 70-6893, 70-6894, E6893, E6894, R13570
Pair of Harris Piston Rings for Triumph 500cc T100 Models - Circa 1958-74 Supplied as a full sets of piston rings - 2x top compression rings, 2x second...

fk420half
£3.95 (£4.74 inc VAT)
420 Regina Classic Motorcycle Chain Half Link To fit 125EBSR 1/2" x 3/16" (P x W) standard 420 chain equivalent to Renold 110044. Allows you to make up...
+

filt131
£10.95 (£13.14 inc VAT)
OEM: 66-8359
Oil Filter Element - BSA M20, M21, M23, M33, B31, B32, B33, SILVER STAR + GOLD STAR OEM: 66-8359
+

clplt299-B24
£3.95 (£4.74 inc VAT)
OEM: 57-2725, 40-3220
BSA C15, C25, B25, B40, B44, B50 - Clutch Steel Plates Inside Diameter: 93mm Outside Diameter: 134mm Stub Length: 5.65mm Available as standard or...

clutch558-B23
£4.95 (£5.94 inc VAT)
OEM: 42-3108
BSA A & B Group swinging arm clutch push rods. BSA A7, A10, B31, B33 4 Spring Clutch models 1958- Length: 11+1/2" (292mm) OD:1/4" (6.4mm) OEM: 42-3108
+

valv227-B17
£13.95 (£16.74 inc VAT)
OEM: VS510, 99-3700, E1487, E1488, 70-1487, 70-1488
Valve Spring Set - Triumph 5T, TR5, T100, 6T, TR6, T110 (racing models) & T120 (1959-60). 8 Springs. Terry No VS510 Includes 4 outer springs and 4...
+

spring1250-B18
£4.95 (£5.94 inc VAT)
OEM: T1250, 57-1250
Triumph Gearbox Mainshaft Pinion Spring - 57-1250 Spring for the kickstart ratchet pinions on the gearbox main shaft. Suit T120 and other models. OEM:...
+

cambush0286-B8
£5.95 (£7.14 inc VAT)
OEM: 71-0286, 70-1479, E1479
Triumph 650/750cc Camshaft Bush Right Hand - 71-0286 Single camshaft bush, Right Hand Side of engine, Made in England Normally 2 required per engine, one...
+

screw0688-B4
£0.75 (£0.90 inc VAT)
OEM: 97-0688, H688
Triumph Slotted Nacelle Motif / Gear Pointer Screw - 5BA x 1/4" Full thread 1/4" UH (6.7mm) OEM: 97-0688, H688
+

pipe1610-B13
£13.95 (£16.74 inc VAT)
OEM: 83-1610, F11610
Triumph Breather Hose 'T' Piece - 500/650/750cc Unit Twins - 1971-73 Crankcase breather pipe connector for T100 Daytona, T120, TR6, T140, TR7 models...
+

kick2764-S
£119.95 (£143.94 inc VAT)
OEM: 57-2764
BSA Kickstart Lever - Unit Singles + A Group Models - Heavy Duty Folding Type With Standard Bend Heavy duty kickstart crank assembly for use on...
+

off-esprk418
£25.95 (£31.14 inc VAT)
OEM: 40-0582, 40-582
BSA C15/B40 - Duplex Engine Primary Drive Sprocket - 18T Crankshaft sprocket for BSA C15, C25, B25 and B40 trials/competition models. You will need to...
+

dowel1532-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1532, E1532
Triumph Oil Junction Block / Tappet Oil Feed Dowel - Pre Unit Twins - 1939-62 + Unit 650/750cc Models Oil junction block to crankcase hollow dowel -...
+

wash2080-B13
£1.95 (£2.34 inc VAT)
OEM: 71-2080, E12080
Triumph Rocker Box Inspection Plug Copper Washer - 500/650cc Unit Twins From 1971 Onwards Folded copper washer for use with the threaded alloy tappet...
+

gbox1897-B8
£4.95 (£5.94 inc VAT)
OEM: 57-1897, T1897
Triumph Kickstart Layshaft Needle Bearing - 350/500cc Models Circa 1964-74 Kickstart spindle bearing as used on 3TA, 5TA, T90, T100 and TR5 models....
+

spindle0375-B18
£7.45 (£8.94 inc VAT)
OEM: 70-0375, E375
Triumph Timing Gear Intermediate Wheel Spindle - All Pre Unit and Unit Twins - Circa 1946-1982 Spindle for intermediate timing gear as fitted to all...
+

spring0403-B18
£0.45 (£0.54 inc VAT)
OEM: 70-0403, E403
Triumph 2 Valve Oil Pump Spring - Pre Unit and Unit Twins From 1939 Onwards Locates within the screwed plugs in the bottom of the pump under the valve...
+

tapp1513A-B13
£4.95 (£5.94 inc VAT)
OEM: 70-1513, E1513, 67-0056, 67-56
Triumph/BSA Mushroom Head Tappet Adjuster - Pre Unit + 650/750cc Unit Twins + A7 and A10 Models - 1946 On Rocker adjusting pin with mushroom head and hex...
+

bolt0932-B4
£2.95 (£3.54 inc VAT)
OEM: 37-0932, W932
Triumph Gear Change Lever / Pedal Bolt - Pre Unit and Unit Models Circa 1951-71 Part threaded bolt as used on the gear change lever on both pre unit and...
+

nut0550-B18
£2.95 (£3.54 inc VAT)
OEM: 21-0550, S550
Triumph Rocker Oil Feed Dome Nut - 750cc Twins and Triples From 1969 Onwards Chrome plated rocker spindle / oil feed pipe domed acorn nut - correct...
+

seal3540
£2.25 (£2.70 inc VAT)
OEM: 70-3540, E3540
Triumph Push Rod Tube Seal - Top - T20 Tiger Cub Models Circa 1954-67 Upper push rod tube oil joint washer as used on all T15 and T20 models from 1954...
+

fkcap029-F2
£22.95 (£27.54 inc VAT)
OEM: 90-8035
2" Vented Petrol or Oil Tank Filler Cap - Chrome Plated 2" fuel/oil cap with offset vent - push turn fit and integral cork seal. Will fit most oil tanks...
+

sprock474H-B5
£23.95 (£28.74 inc VAT)
OEM: 57-1476, T1476
Triumph 19T Gearbox Sprocket - 350/500cc Unit Twins From 1959-74 Front drive sprocket to fit 350/500cc unit twins - T90, 3TA, 5TA, T100 etc. Chain...
+

bear016-2RS
£4.95 (£5.94 inc VAT)
OEM: 65-5883, 37-1041, 41-6016, 01-2542
Ball Bearing Range of uses including: Wheel bearing, wheel bearing, transmission and engine bearing Imperial sized bearing, for British Motorcycles OD:...
+

bolt752-B14
£18.95 (£22.74 inc VAT)
Engine/Gearbox Mounting Bolt Set BSA A10, A7 Swinging Arm models 10 piece UK Version: does not have nuts on 4 of the bolts

clutch3762-B18
£3.95 (£4.74 inc VAT)
OEM: 57-3762
Triumph T120/T140 cable abutment (threaded for screw in adjuster) OEM: 57-3762, T3762
+

fkgk326
£10.95 (£13.14 inc VAT)
BSA - 175cc Two Stroke, D5, D7 Bantam Super Engine Gasket Set 1958-1966 Gasket set for the BSA Bantam D5, D7, and other models.
+

sprock-nut0440-B18
£6.95 (£8.34 inc VAT)
OEM: 57-0440, T440
Triumph Gearbox Sprocket Nut - 57-0440 Triumph Gearbox Sprocket Nut Nut that holds the rear drive sprocket on the gearbox shaft. Suit T120 and other...
+

valvecollar1543-B13
£5.45 (£6.54 inc VAT)
OEM: 70-1543, E1543
Triumph Valve Spring Top Collar - 650/750cc Twins - 1963-82 Triumph various models, valve spring retaining collar, sits on top of the valve spring with...
+

nut0594-B18
£2.45 (£2.94 inc VAT)
OEM: 21-0594, S594, 21-0545, S545
Triumph Gearbox Mainshaft Nut/Swing Arm Pin Nut - 21-0594, 21-0545 Triumph gearbox mainshaft nut - OR - Swing arm pin nut Suits some Triumph 500/650cc and...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.