.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

clutch2062-B23
£2.95 (£3.54 inc VAT)
OEM: 57-2062
Clutch Cable Abutment - Short Slotted Ferrule Type - Triumph Unit Twins Pre 1968 Overall Length: 9/16" (14.5mm) Diameter: 7/16" (11mm) OEM: 57-2062, T2062
+

nut2182-B13
£2.45 (£2.94 inc VAT)
OEM: 70-3735
Alternator Rotor Nut - Triumph T120, T140, TR7, T160 - 1971-82 To secure the alternator rotor on the shaft. Thread: 7/16" UNF - 20 TPI Longer type with...
+

bush3337-B8
£28.95 (£34.74 inc VAT)
OEM: 65-3337
BSA Layshaft Bush - Clutch End - A and B Plunger & Swing Arm Models + C Models To fit BSA A & B Models - Swinging Arm and Plunger + C10 & C11...
+

nut1492-B13
£4.95 (£5.94 inc VAT)
OEM: 70-1492, E1492
Triumph Exhaust Camshaft Nut LH Thread - 500/650cc Pre-Unit Twins Camshaft retaining nut. 5/8" 20 TPI with left hand thread. OEM: 70-1492, E1492
+

gask1444
£1.95 (£2.34 inc VAT)
OEM: 71-1444, 70-6516, E11444, E6516
Triumph/BSA Triples - Sump Gasket - A75 Rocket 3 + T150, T160 Trident Models Sump filter gasket for all BSA and Triumph triples from 1969-75. OEM:...
+

clutch3951-B24
£2.95 (£3.54 inc VAT)
OEM: 57-3951, 57-4121
BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1969-73 - Long Type Clutch spring cup for BSA singles - B50 and later C25/B25 + TR5W models...
+

bush3169-B8
£15.95 (£19.14 inc VAT)
OEM: 67-3169
BSA Kickstart Ratchet Pinion Bush - A, B and C Group Models Circa 1951-62 Correct fitment on plunger and swinging arm A7 and A10 models + swinging arm...
+

nut0124-B14
£3.45 (£4.14 inc VAT)
OEM: 02-0124, 2-124, 27-6716
1/2" x 20 CEI Thin Nut - BSA Camshaft Pinion Nut + Hub Spindle Lock Nut - Various Uses Used to secure the camshaft gear on A7 and A10 models + some early...
+

plate3553-B13
£1.45 (£1.74 inc VAT)
OEM: 71-3553, E13553
Triumph Cylinder Head Bolt Bridge Plate - T140/TR7 Models Circa 1973-83 Cylinder head stud inner bridge plate, correct fitment on 750cc twins. Length:...

wash3770-B13
£2.45 (£2.94 inc VAT)
OEM: 82-3770, F3770
Triumph Serrated Gearbox Clamp Washer - Pre Unit 500/650cc Models Circa 1956-62 Serrated clamping washer, fits on the top gearbox mounting stud to...
+

spring0497-B18
£1.95 (£2.34 inc VAT)
OEM: 57-0497, T497
Triumph Primary Chaincase Oil Adjuster Spring - Pre Unit Twins Circa 1939-62 Spring for use with the rear chain oiler / oil restrictor screw, as fitted to...
+

kick3428-B4
£1.95 (£2.34 inc VAT)
OEM: 65-3428
BSA Kickstart Lever Spring Clip - A and B Group With Folding Type Crank + Bantam D1 and D3 Models Kickstarter crank pedal spring for use with a folding...
+

bearing0732-F4
£7.95 (£9.54 inc VAT)
OEM: 24-0732, 24-732, 70-8003, E8003
BSA/Triumph Crankshaft Main Bearing - BSA C Group Circa 1946-58 + Unit Singles Deep groove open type ball bearing - drive side and/or timing side,...
+

nut3771-B13
£4.45 (£5.34 inc VAT)
OEM: 82-3771, F3771
Triumph Gearbox Clamp Flanged Nut - Drive Side - Pre Unit 500/650cc Models Circa 1955-62 Drive side serrated and flanged nut - locates on the gearbox top...
+

gearbox0372-B18
£8.95 (£10.74 inc VAT)
OEM: 57-0372, T372
Triumph Gearbox Index Plunger Holder - Pre-Unit and Unit 650/750cc Twins and Triples - Circa 1946-72 Gear control camplate plunger bush - correct fitment...
+

tach0586-G15
£35.95 (£43.14 inc VAT)
OEM: 68-0586, 68-586
BSA Tacho Drive / Rev Counter Drive Pin - A50 and A65 Models Circa 1964-72 Tachometer spindle drive shaft with groove for circlip and square end -...
+

renold-530/158
£46.95 (£56.34 inc VAT)
OEM: 110056, D438, 60-0438
Extra Long 530 Renold Classic Motorcycle Chain - 136SR 5/8" x 3/8" - 158 or 194 Links 136SR 5/8" x 3/8" (P x W) standard 530 standard roller final...
 

0.75mm-KS-gasket-paper
£2.75 (£3.30 inc VAT)
KS Gasket Material - 0.75mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet KS is a cost effective grade sealing material with very good...

piston-rings-cp165
£18.95 (£22.74 inc VAT)
OEM: CP165, 70-3691, 70-3690, 70-3692, E3691, E3690, E3692
Harris Piston Rings For Triumph 350cc Unit Models - Circa 1959-1966 Suitable for 3TA and T90 models circa 1959-66. Supplied as a full sets of piston rings...

fkgk813
£17.95 (£21.54 inc VAT)
Triumph Motorcycle - 350cc 3HW, WD Engine Gasket Set 1939-46
+

fkgk815
£34.95 (£41.94 inc VAT)
Triumph Motorcycle - 650cc T120, Bonneville (Pre unit) Engine Gasket Set 1956-62
+

fkgk837
£48.95 (£58.74 inc VAT)
OEM: E8773, 70-8773, E11445, 71-1445, E4752, 70-4752, E11733, 71-1733, E6496, 70-6496, E11350, 71-1350, E11454, 71-1454, E11453, 71-1453
Triumph - 750cc T150 Trident Engine Gasket Set 1972-75 Set contains the following gaskets: Rocker Cover x2, Cylinder Head, Cylinder Base, Push Rod Top...
+

fkgk061
£11.95 (£14.34 inc VAT)
OEM: E7343, 70-7343, E3751, 70-3751, E1335, 70-1335, NA43, F1880, 82-1880
Triumph Rocker Box Gasket Set. Suit 3TA, T21, 5TA, T100A, 350/500cc 1957-66 For the earlier engine models Comprises of 3 Gaskets and 12 Washers OEM: E7343,...
+

bigend017
£144.95 (£173.94 inc VAT)
OEM: B14, 66-0483 ,65-1614, 66-0481
BSA B31, B32, B33, B34, M20, M21, M22, M23, M24, M33 Big End Bearing (1937-59) Big end Conrod Bearing - To fit con rod no's 66-483, 65-1614, 66-481 Made in...
+

fkclutch218-B23
£8.95 (£10.74 inc VAT)
OEM: 70-5085
TENSION BLADE - Triumph Triumph T140 primary chain tensioner blade. For Triplex Chain Chain Slipper, tensioner. OEM: 70-5085
+

spr064-B24
£2.45 (£2.94 inc VAT)
OEM: 04-0358, 04-0385
Norton AMC Clutch Spring, for Norton AMC Models Price is for One Spring Length: 1+13/16" (46mm) Diameter: 11/16" (17mm) OEM: 04-0358, 04-0385
+

fkgk254
£18.95 (£22.74 inc VAT)
Norton Motorcycle - 500cc 18, ES2 Decoke Gasket Set 1948-55
+

pist288-rings
£44.95 (£53.94 inc VAT)
OEM: R3650
Set of Hepolite Piston Rings for BSA A10 650cc models etc (1952 - 63). Supplied as Hepolite Rings for 2 Pistons. Bore Size : 70mm Standard, available as...

nut2177-B14
£0.95 (£1.14 inc VAT)
OEM: 21-2177
T140/TR7 Cylinder base nut (Outer studs) 1972-82 OEM: 21-2177
+

bolts213-B14
£21.95 (£26.34 inc VAT)
OEM: 00-0122, 67-254, 67-0254, 67-258, 67-0258, 67-283, 67-0283
BSA A7/A10 Iron head cylinder head bolt set (9 Piece set) OEM: 00-0122, 67-254, 67-0254, 67-258, 67-0258, 67-283, 67-0283
+

screw081H-B18
£0.45 (£0.54 inc VAT)
OEM: 70-8177, 57-4672
Contersunk Screw - Rotor Cover - 70-8177 To screw the rotor cover on the primary chaincase OEM: 70-8177, 57-4672
+

tappet-1477-B13
£18.95 (£22.74 inc VAT)
OEM: 70-1477, E1477
Triumph Tappet Guide Block - 500/650cc Pre Unit and 650cc Early Unit Models Tappet block for the cam followers, suitable for the following models: Early...
+

valvecollar6439-B13
£4.95 (£5.94 inc VAT)
OEM: 70-6439, E6439
Valve Spring Bottom Collar - Triumph - 70-6439 Triumph various models, valve spring retaining collar, sits under the valve spring between the spring and...
+

clutch2368-B23
£0.75 (£0.90 inc VAT)
OEM: 60-2368, D2368
3/8" Ball Bearing - Single Ball - Universal Use 3/8" (10mm approx) diameter Suitable for use with Triumph Unit Twins fitted with a 3 ball Clutch...
+

gbox1405-B8
£26.95 (£32.34 inc VAT)
OEM: 57-1405, T1405
Triumph High Gear Bush - 350/500cc Unit Models - 1959 Onwards Gearbox mainshaft high gear bush, fits inside sleeve gear to support the mainshaft....
+

spring1136-B18
£10.95 (£13.14 inc VAT)
OEM: 67-1136
BSA Cush Drive Spring - Pre Unit A, B, & M Models - 1955-62 Correct for all swinging arm models with a 2 lobe cush drive cam from 1955-62. Made in...
+

spring3247-B24
£1.95 (£2.34 inc VAT)
OEM: 67-3247
BSA Clutch Spring - A7, A10 Plunger & Rigid Frame Models - 6 Spring Clutch BSA clutch spring for six spring clutches as fitted to BSA A Group plunger...
+

duplex-rivet
£5.95 (£7.14 inc VAT)
OEM: 114038/107, 7/C221, Nr. 107
Renold Duplex Rivet Link - 3/8" x 7/32" Pitch Soft link - 3/8" Pitch x 7/32" Width. To modify the length of primary drive chain, or camshaft chain....
+

hub3170-B23
£39.95 (£47.94 inc VAT)
OEM: 42-3170
BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

gkset7001
£37.95 (£45.54 inc VAT)
OEM: 71-4619, 71-3573, 71-1283, 70-7310, 71-3673, 71-2599, 70-6309
Triumph 750cc Twins - Universal Engine Gasket Set - All T140 and TR7 Models From 1973 Onwards Engine gasket set containing the gaskets and 'O' rings...
 

kick3162-B4
£1.45 (£1.74 inc VAT)
OEM: 67-3162
BSA Kickstart Ratchet Spring - A, B, C Group Plunger and Swinging Arm + A50 and A65 Models Gearbox mainshaft pinion spring locates between the kickstarter...
+

screwkit-950M-B9
£37.95 (£45.54 inc VAT)
OEM: E1049, E427, E2691 , E329. T452, E573, 70-1049, 70-0427, 70-2691, 70-0329, 57-0452, 70-0573
Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo models Circa 1946-53 Complete set of engine/gearbox screws suitable for 5T, T100,...
+

plug1792-B13
£2.45 (£2.94 inc VAT)
OEM: 82-1792, F1792
Triumph Oil Tank Drain Plug - Pre Unit Models Circa 1946-62 + T20 Models Circa 1959-63 Oil tank drain plug as used on pre unit models from 1946 onwards...
+

bolt0645-B18
£1.95 (£2.34 inc VAT)
OEM: 15-0645
BSA Primary Chaincase/Crankcase Drain Plug Bolt - A7, A10, A50, A65 Models From 1960 Onwards Correct fitment on later A7 and A10 models from 1959 onwards...
+

gear1109
£4.95 (£5.94 inc VAT)
OEM: 57-1109, 40-3061, T1109
Triumph/ BSA Gearchange Return Spring - T20 Tiger Cub + BSA Unit Singles Circa 1959-71 Gear change return spring - correct fitment on T20 Tiger Cub...
+

oilseal3933-B13
£2.95 (£3.54 inc VAT)
OEM: 70-3933, E3933
Triumph T20 Tiger Cub Gearbox Mainshaft Oil Seal Retainer - Circa 1957 Onwards Gearbox mainshaft shaft oil seal retainer - locates behind the clutch. OD:...
+

gkch1449
£2.45 (£2.94 inc VAT)
OEM: 71-1449, E11449, 57-3955, T3955
Triumph/BSA Triples Clutch inspection Cover Gasket - T150 Trident + A75 Models Four hole clutch inspection cover gasket - correct fitment on T150 and A75...
+

screw6609-B19
£1.75 (£2.10 inc VAT)
OEM: 14-6609
Triumph 1/4" UNC Cheese Head Screw - 500/650/750cc Models Circa 1969-79 Cheesehead screw - used extensively on unit singles, twins and triples from 1969...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.