.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

fkgk822
£34.95 (£41.94 inc VAT)
OEM: E3730, 70-3730, NA43A, E4547, 70-4547, E3547, 70-3547, E3751, 70-3751, E5049, 70-5049, E3832, 70-3832, T1170, 57-1170, E4549, 70-1549, E1335, 70-1335, E4752, 70-4752, NE507, E5660, 70-5660, E7563, 70-7563
Triumph - 650cc Trophy, TR6 S/S, Bonneville, T120 Engine Gasket Set 1967-68 9 Stud Head Set contains the following gaskets: Oil Pump, Manifold x3,...
+

fkrub29
£1.99 (£2.39 inc VAT)
Ariel Kickstart Rubber - closed Suit Heavyweight Ariels - Closed end Length: 3+1/2" Hole: 9/16"
+

gear341-B8
£37.95 (£45.54 inc VAT)
OEM: 06-1499, 04-1311, 04-0632
Gear Lever Norton, AMC, Gearchange lever with rubber (1956-74). Fits Norton singles and twins with an AMC gearbox. Splined shaft diameter 5/8" OEM:...
+

clplt329-B24
£7.95 (£9.54 inc VAT)
OEM: 67-3241
BSA, Ariel, Panther, Vincent Clutch Steel Plates - Surflex Fits Ariel Colt 200cc BSA C10L, C11G, C12 models (1954-58) A7, A10 Plunger models (1950-57)...
+

spr012-B24
£1.95 (£2.34 inc VAT)
OEM: 90-1367
BSA Bantam Clutch Spring (all models) Price is for One Spring Length: 1+3/16" (30mm) Diameter: 1/2" (13mm) OEM: 90-1367
+

fkgk062
£13.95 (£16.74 inc VAT)
OEM: E9511, 70-9511, E3751, 70-3751, E1335, 70-1335, NA43, F1880, 82-1880
Triumph Rocker Box Gasket Set. For the later engine models Suit 3TA, T21, 5TA, T100, 350/500cc (1966 -) OEM: E9511, 70-9511, E3751, 70-3751, E1335,...
+

kick009-G3
£37.95 (£45.54 inc VAT)
OEM: 42-3037
Kickstart Lever BSA A and B Models - Spring Top, Folding Type - 1954 Onwards Chrome plated forged steel. Plain Spindle hole 3/4" diameter. OEM type with...
+

pumpgkt735
£1.00 (£1.20 inc VAT)
AJS Matchless Oil Pump Gasket Single cylinder models
+

bolt206-B19
£4.45 (£5.34 inc VAT)
OEM: 21-2206
Triumph 650cc and 750cc Twin - Cylinder Head Bolt 3/5" UNF OEM: 21-2206
+

vvg400
£99.95 (£119.94 inc VAT)
OEM: 67-0031, 67-0323, 67-0324, 67-0742, 67-0743
BSA A10 Iron Head models Complete Valve Guide Set (1949-62). Includes Guides and Valves. Valve Guides : Set of 4 Cast Iron Guides (67-0031) OEM: 67-0031,...
+

cap004-B4
£6.95 (£8.34 inc VAT)
OEM: 01-4457
AJS/Matchless Primary Chaincase Inspection Cap Suitable for AJS/Matchless Models with the Pressed Steel Chaincase Screw in fixing and bar under the cap...
+

inlet3338/9
£33.95 (£40.74 inc VAT)
OEM: 71-3338, 71-3339, E13338, E13339
Triumph - Pair of Inlet Manifolds Left and Right Side - T140 - 1973-78 For use with a 30mm Amal carburettor Correct threaded hole to adapt the breather...
+

nut3053-B13
£6.95 (£8.34 inc VAT)
OEM: 67-3053
BSA Gearbox Sprocket Nut - A7, A10, B31, B33 + C10, C11 - 4 Speed Nut that holds the rear drive sprocket on the gearbox shaft OD: 1+7/8" (47.7mm) ID:...
+

valvecollar3742-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3742, E3742
Triumph - Valve Spring Top Collar - 350/500cc Unit Twins Valve spring retaining collar, sits on top of the valve spring with the valve collets. Made in...
+

nut0152-B14
£3.45 (£4.14 inc VAT)
OEM: 15-0152, 15-152, NM16187, 06-7664
7/16" x 20 TPI Nut  - BSA M20 & M21 Cylinder Base Nut + Norton Bottom Yoke Nut Height: 7/16" (10.8mm) OEM:  15-0152, 15-152, NM16187, 06-7664
+

clutch650-B23
£2.95 (£3.54 inc VAT)
OEM: 26-0650, 26-650
Clutch Rollers - BSA - 26-0650 - pack 10 Clutch centre rollers for BSA, duplex chain type BSA A7 and A10 early models with the 6-spring clutch and...
+

stub4791
£2.45 (£2.94 inc VAT)
OEM: 70-4791, E4791
Triumph - Inlet Manifold Balance Pipe Stub Connector - 650cc models from 1963-68 CEI thread. Polished stainless steel. Made in England using the...
+

shim0661-B18
£3.45 (£4.14 inc VAT)
OEM: 66-0661, 66-661
BSA Crankshaft Drive Side Shim - B & M Group Models - 1940-63 ID: 1" (25.4mm) OD: 1+9/16" (39.7mm) Thickness: 0.022" (0.5mm) Made in England OEM:...
+

bolt1601-B13
£3.45 (£4.14 inc VAT)
OEM: 70-1601, E1601
Triumph Rocker Oil Feed Banjo Adaptor Bolt - Pre-Unit Twins Correct fitment on many 500/650cc pre-unit twins from 1947 onwards Length UH: 3/4" (18.9mm)...
+

plug0615-B18
£6.45 (£7.74 inc VAT)
OEM: 65-0615, 65-615
BSA Small Journal Crankshaft Sludge Trap Plug - A7 and A10 Models Circa 1947-62 To fit small journal crankshafts as used on A7 models from 1947-62 and A10...
+

nut3120-B14
£5.45 (£6.54 inc VAT)
OEM: 70-3120, E3120
Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59 Engine sprocket nut as used on pre-unit T100, TR5, T110, TR6 and...
+

pist0630
£139.95 (£167.94 inc VAT)
OEM: 40-0630, 40-0632, 40-0634, 40-630, 40-632, 40-634
Gandini/GPM Piston - BSA C15 / BSA C25 - Circa 1959-67 Supplied as 1 piston, complete with rings, gudgeon pin and circlips 2x 1/16" Piston rings - 1st...

oilseal1242
£2.95 (£3.54 inc VAT)
OEM: 67-1242
BSA Primary Chaincase Oil Seal - A7 and A10 Rigid/Plunger Frame Models - Circa 1947-57 Chaincase / gearbox mainshaft oil seal - correct fitment on...
+

plate2909-B13
£5.95 (£7.14 inc VAT)
OEM: 70-2909, E2909
Triumph Patent Plate - 650 Twin Models Brass timing cover triangular name plate for 6T, T120 and TR6 models. Embossed with: Triumph 650 TWIN, MADE UNDER...
+

plate1678-B13
£2.95 (£3.54 inc VAT)
OEM: 70-1678, E1678
Triumph Patent Plate - Tiger 100 Models Brass timing cover triangular name plate for Tiger 100 models. Embossed with: Triumph TIGER 100, MADE UNDER...
+

0.8mm-paper
£1.10 (£1.32 inc VAT)
Cellulose Paper Gasket Material - 0.8mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet General Properties - a cellulose fibre base...

camplate4055-B4
£67.95 (£81.54 inc VAT)
OEM: 57-4055, T4055, 57-0500, T500, 57-3650, T3650
Triumph 4 Speed Gear Selector Camplate - Unit 650cc Twins + All Pre Unit Twins -1939-72 Gear selector camplate, correct fitment on 4 speed unit 650cc...
+

screw1077-B2
£0.45 (£0.54 inc VAT)
OEM: 71-1077, E11077
Triumph Short Breather Tube Stub/Cover Plate Screw - 500/650/750cc Unit Twins - 1970-83 3/16" Pozi-drive countersunk screw used to secure the breather...
+

TP-3223-210
£4.95 (£5.94 inc VAT)
OEM: 70-3223, E3223
Triumph Tappet Adjuster - 350/500cc Unit Models - Circa 1959-74 - Various Options Rocker adjusting pin - correct fitment on unit 3TA, 5TA, T90 and T100...
 

cover7318
£119.95 (£143.94 inc VAT)
OEM: 71-7318, E17318, 70-4567, E4567, 70-8797, E8797, 70-9246, E9246, 71-7042, E17042
Triumph Timing Cover - Unit 650cc Models + 750cc Twins Circa 1963-81 Polished alloy timing cover compatible with either a 2 valve or 4 valve oil pump....
+

fkgk0963
£2.45 (£2.94 inc VAT)
OEM: 40-0963, 71-1426, 70-7858, E11426, E7858
BSA/Triumph Rocker Box Gasket - 250cc Unit Singles Circa 1967-70 Correct fitment on earlier B25, C25 and TR25W models circa 1967-70. OEM: 40-0963,...
+

headgk1306
£2.95 (£3.54 inc VAT)
OEM: 90-1306
BSA Bantam Cylinder Head Gasket - D5 and D7 Models Circa 1958-66 Fibre / non asbertos type cylinder head gasket - correct fitment on D5 and D7 models....
+

bolt4098-B14
£2.45 (£2.94 inc VAT)
OEM: 70-4098, E4098
5/16" BSF - 1+7/8" Crankcase Bolt - Unit 650cc + T20 Tiger Cub Models Circa 1960-68 Small hex, part threaded crankcase bolt. One bolt required on unit...
+

gear1077-B4
£1.95 (£2.34 inc VAT)
OEM: 57-1077, 40-3062, T1077
Triumph/ BSA Gearchange Return Spring Bolt - T20 Tiger Cub + C15 and B40 Models Circa 1959-64 Gear change return spring anchot bolt - correct fitment on...
+

gear2106-B4
£1.45 (£1.74 inc VAT)
OEM: 57-2106, 40-3155, T2106
Triumph/BSA Gearchange Quadrant Plunger Spring - T20 Tiger Cub Models + Unit Singles Gear change quadrant plunger - T20 Tiger Cub models from 1965...
+

plug3190-B13
£5.95 (£7.14 inc VAT)
OEM: 40-3190
BSA Gearbox Drain Plug and Level Tube - Unit Singles Circa 1965-67 Correct fitment on C15, B25, C25, B40, B44 models from 1965-67. Thin hexagon head -...
+

oilseal8023
£2.95 (£3.54 inc VAT)
OEM: 048023, D12/913, T2124, 04-8023
Norton Crankcase Timing Cover Mainshaft Oil Seal - 500/600/650/750cc Twins Mainshaft oil seal - locates in the crankcase timing cover. Correct fitment on...
+

clutch1318-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1318, T1318
Triumph Small Clutch Rebound Rubber - T20 Tiger Cub Models From 1954 Onwards Small clutch shock absorber rebound rubber as used on all T15 Terrier and T20...
+

shim1707-B13
£1.25 (£1.50 inc VAT)
OEM: 66-1707
BSA Cush Drive Bearing Alignment Washer - B & M Group Models - 1940-63 0.32" cush drive bearing to engine sprocket washer as used on B31, B32, B33,...
+

stud0669
£4.45 (£5.34 inc VAT)
OEM: 21-0669, S669
Triumph Crankcase Halves Front Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards Crankcase front stud - secures the exhaust pipe stays. As...
+

clutch3643-B23
£9.95 (£11.94 inc VAT)
OEM: 57-3643, T3643
Triumph/BSA Clutch Shaft Needle Roller Bearing - T150, T160 and A75 Models Clutch shaft / hub needle race bearing as used on all 750cc triples from 1968...
+

gearbox0407-B4
£14.95 (£17.94 inc VAT)
OEM: 57-0407 T407
Triumph Gearchange Quadrant Plunger Guide Plate - All Pre Unit + Unit 650/750cc Twins and Triples Locates over the gear change quadrant to support and...
+

gk9348-Copper
£8.95 (£10.74 inc VAT)
OEM: 70-9348, E9348
Triumph 650cc Rocker Box Gasket - Unit Models Circa 1969-70 - Copper Rocker box to cylinder head joint washer with push rod holes. Correct fitment on...
+

gkt-0144
£2.95 (£3.54 inc VAT)
OEM: 68-0144, 68-144
BSA Rocker Box Gasket - A50 and A65 Models - Circa 1962-70 Rocker box cover gasket - correct fitment on A50 and A65 models with 1/4" rocker box studs....
+

clip4705-B13
£2.45 (£2.94 inc VAT)
OEM: 70-4705, E4705
Triumph Primary Chain Oiler Tube Clip - Unit 650/750cc Models From 1963 Onwards Positions the primary chain oiler tube - locates in the inner primary...
+

fkgk200b
£22.95 (£27.54 inc VAT)
Ariel Motorcycle - 350cc NG WD Engine Gasket Set 1938-51
+

fkgk806
£31.95 (£38.34 inc VAT)
Triumph Motorcycle - 500cc Tiger 100, TR5 Engine Gasket Set 1951-58
+

fkgk198
£1.85 (£2.22 inc VAT)
OEM: 13-37704 71-2574
Triumph 650cc Rocker Cover Gasket. OEM: 13-37704 71-2574
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.