.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Bike Specific Tools

tool1861c
£10.95 (£13.14 inc VAT)
OEM: 60-1861, 61-7014, DA50/1, 61-3766, D1861
Triumph/BSA Clutch Centre Puller - 1" x 20TPI - Twins Pulls the clutch hub from the taper on the main shaft. Fits BSA twin cylinder models, A50/A65...
+

tool3170
£10.95 (£13.14 inc VAT)
OEM: 61-3170, 61-3700
Clutch Spring adjustment Tool. Measures aproximately 3". For Triumph and BSA models. Helps to adjust the clutch pressure plate springs. OEM: 61-3170,...
+

tool7019H
£3.95 (£4.74 inc VAT)
OEM: 61-7019
Triumph Rocker Spindle O Ring Guide Tool - All Pre Unit + Unit 650/750cc Models Can be used on all pre-unit models + 650/750cc twins + 750cc triples....
+

tool509
£15.95 (£19.14 inc VAT)
Triumph Rocker Box Inspection Cap Removal Tool - Unit Twins Circa 1959-72 Can be used on cross slotted type rocker box caps, as used on various models...
+

tool3760
£9.95 (£11.94 inc VAT)
OEM: 61-3760
Triumph / BSA Clutch Locking Plate Tool - 3 or 4 Spring Clutch Correct tool to lock up the clutch when you want to remove the flywheel nuts or clutch...
+

tool526
£7.95 (£9.54 inc VAT)
Chaincase Plug / Cap Removal and Inspection Tool - Universal Use Three way tool for the removal and inspection of slotted type chaincase plugs as used on...
+

tool9114
£2.45 (£2.94 inc VAT)
OEM: 67-9114
BSA Pushrod Locating and Alignment Comb/Tool - A10, A7 The correct tool for use on BSA 500/650cc twins OEM: 67-9114
+

tool7012
£5.45 (£6.54 inc VAT)
OEM: 61-7012, 60-2108, 60-0496, D2108, D496
Triumph/BSA Primary Chain Adjuster Tool - Unit 350/500/650/750cc Models Primary chain tensioner screwdriver for use on many unit Triumph and BSA single...
+

tool505
£13.95 (£16.74 inc VAT)
Tappet Adjustment tool - Norton, BSA, Triumph - 5/16" Tappet Screws Makes valve adjusting easier. Fits most Triumph 500/650/750 twins circa 1950-1970....
+

tool2213
£52.95 (£63.54 inc VAT)
OEM: 60-2213, D2213, Z89, Z144, Z145
Triumph Cam Pinion/Gear Extractor and Fitting Tool - 350/500/650cc Unit and Pre Unit Twins For the effective removal and installation of exhaust and...
+

tool0220
£12.95 (£15.54 inc VAT)
OEM: 60-0220, D220
Triumph Combination Fork Spanner - Pre Unit + 500/650cc Unit Models - Circa 1950-68 Double ended fork stanchion top nut, bottom damper nut and oil seal...
+

tool533M
£29.95 (£35.94 inc VAT)
OEM: 61-6017
Fork Seal Holder Remover Tool - 61-6017 Universal fork seal removal tool with threaded holes. Powder coated. Perfect to loosen off the seal holders on...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.