.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

bush1367-B8
£7.95 (£9.54 inc VAT)
OEM: 57-1367, T1367, 57-0911, T911
Triumph Gearbox Layshaft Bush - 350/500/650cc Pre Unit Models Fits all pre unit 350, 500, 650 models up to 1962 Also correct for unit 3TA, 5TA, T21...
+

kick3275-B4
£9.45 (£11.34 inc VAT)
OEM: 40-3275, 57-2687, T2687
BSA/Triumph Kickstart Return Spring - Unit Singles Circa 1965-70 Correct fitment on later side points  C15, B40 models + C25, B25, B44, T25 and TR25W...
+

screw0496-B18
£2.95 (£3.54 inc VAT)
OEM: 57-0496, T496
Triumph Primary Chaincase Oil Adjuster Screw - Pre Unit Twins Circa 1939-62 Rear chain oiler / oil restrictor screw - correct fitment on all pre unit...
+

gk1477
£1.45 (£1.74 inc VAT)
OEM: 57-1477, T1477
Triumph Inner Primary Chaincase to Crankcase Gasket - Pre Unit 500/650cc Models Circa 1957-62 Correct fitment on 5T, T100, 6T, T120 and TR6 models from...
+

gkch7627
£14.95 (£17.94 inc VAT)
OEM: 06-7627, 067627, A2/486, CB10, 13185, NM13185, 26696
Norton Primary Chaincase Rubber Gasket Seal - 500/650/750cc Singles and Twins - Pre 1968 Front chaincase halves joint / sealing washer, used on all Norton...
+

bush0378-B8
£7.45 (£8.94 inc VAT)
OEM: 70-0378, E378
Triumph Timing Cover Crankshaft Oil Feed Bush - 500/650cc Pre Unit Models From 1946 Onwards Timing gear cover to crankshaft oil feed bush as fitted to all...
+

seal1512
£2.95 (£3.54 inc VAT)
OEM: OEM: 57-1512, T1512
Triumph Kickstart Shaft Rubber Sleeve - Later Pre Unit and Early 650cc Twins - Circa 1958-63 Rubber oil seal tube - locates between the kickstart lever...
+

gearbox4403-B13
£8.95 (£10.74 inc VAT)
OEM: 57-4403, T4403
Triumph Gearchange Quadrant Plunger - 5 Speed 650/750cc Twins and Triples + Conversions Gearbox plunger - correct fitment on five speed T120, TR6, T140,...
+

kick0089-B4
£8.95 (£10.74 inc VAT)
OEM: 90-0089, 90-89
BSA Bantam Kickstart Return Spring - D1, D3, D5, D7, D10, D14 and B175 Models Correct fitment on all BSA Bantams from D1 through to D14 and B175 models....
+

wash1031-B18
£1.95 (£2.34 inc VAT)
OEM: 57-1031, T1031
Triumph Primary Chaincase Oil Retainer Plate - Pre Unit Twins Circa 1952-56 Oil sealing washer, locates within the inner chaincase behind the retaining...
+

box4403
£42.95 (£51.54 inc VAT)
OEM: BG 5333/170, 60-4403, 60-5540
Triumph T160 / Norton Commando MK3 Left Hand Mounted Speedometer Gearbox Correct fitment on T160 and Commando MKIII models with a rear disc brake and...
+

wash0070
£2.25 (£2.70 inc VAT)
OEM: 90-0070, 99-70
BSA Gearbox Sprocket Tab Washer - All Bantam Models D1-D14, B175 and Bushman Models Gearbox sprocket lockwasher as used on all Bantam models. OD: 1+5/8"...
+

kick012-2764-G3
£51.95 (£62.34 inc VAT)
OEM: 57-2764
Kickstart Lever BSA A and B Models Suit BSA Models: A7, A10, A65, B25, B44, B50 Folding Lever Plain Spindle hole 3/4" diameter OEM: 57-2764, 57-2763...
 

pmp-gk2618
£1.95 (£2.34 inc VAT)
OEM: 65-2618
BSA Oil Pump Gasket - Pre Unit Singles - B, C and M Group Models Circa 1940-62 Fibre oil pump joint washer for use with the round type pump as fitted...
+

fkgk836
£42.95 (£51.54 inc VAT)
OEM: 71-3910, 70-5660, 70-73563, 70-6309, 71-3681, 70-4752, 70-7310, 71-1283, 71-2599, 71-3546, 71-1419, 71-1463
Triumph - 750cc TR7, T140 Engine Gasket Set 1973 Onwards Set contains the following gaskets: Rocker Cover x2, Cylinder Head, Cylinder Base, Push Rod...
+

headgk021
£15.95 (£19.14 inc VAT)
OEM: 70-3614, E3614, 70-3614/080
Triumph Cylinder Head Gasket - Pre Unit 650cc Models - 8 Hole - Standard or Extra Thick Solid copper cylinder head gasket as fitted to 8 Stud  6T, T110,...

trp-ch321SR-B12
£54.95 (£65.94 inc VAT)
OEM: 116038, C321SR, 60-4125, 06-0366, 19-8692, 19-8639, 60-0699
Regina Triplex Primary Chain - 3/8" x 7/32" Pitch - Endless Triplex chain 3/8" Pitch x 7/32" Width - Endless. Suitable as primary drive chain on many...

bigend236-B3
£24.95 (£29.94 inc VAT)
Triumph 3TA, 5TA, T100A, T100R etc.(350cc and 500cc twins) (1957-74) Big End Shell Set. Glacier number B2047M. Size : Standard Set qty : 2 pairs OEM:...
+

spr198-T-B24
£1.95 (£2.34 inc VAT)
OEM: 57-2727, 40-3231
Triumph Clutch Spring, for Triumph TR25, T20 Tiger Cub Price is for One Spring Length: 1+7/8" (48mm) Diameter: 1/2" (13mm) OEM: 57-2727, 40-3231, T1145,...
+

kick025-B4
£5.95 (£7.14 inc VAT)
OEM: 68-3053
BSA A50, A65 Kickstart return spring OEM: 68-3053
+

pipe249
£21.95 (£26.34 inc VAT)
OEM: 40-0183, 40-183, 47-8397, 41-0807, 41-807
BSA Rocker Oil Feed Pipe - C15, B25, B40, B44, B50 Models A rocker oil feed pipe and banjo assembly to fit many of the BSA unit singles. Designed to be...
+

vvg424
£99.95 (£119.94 inc VAT)
OEM: 70-3827, 70-3828, 70-4603, 70-2904
Triumph T120 (1963-72), TR6 (1966-72) 650cc, Complete Valve guide set. To Engine No. DU44394 Includes Bronze guides, and valves. Valve Guides : Set of 4...
+

gearbox1878-B13
£1.95 (£2.34 inc VAT)
OEM: 57-1878, T1878
Triumph Gear Change Thrust Button - OEM: 57-1878 Gear selector mechanism, thrust button OEM: 57-1878, T1878
+

cambush2260-B8
£5.95 (£7.14 inc VAT)
OEM: 70-2260, E2260, E1516, 70-1516
Triumph 650/750cc Camshaft Bush Left Hand - 70-2260 Single camshaft bush, Left Hand Side of engine, Made in England Normally 2 required per engine, one...
+

fkgk124
£2.95 (£3.54 inc VAT)
OEM: 06-1092, 061092
Norton Commando/Dominator Timing Case Gasket - 06-1092 Norton Commando 750cc Norton twins, including Dominator 500/600/650cc Timing Cover gasket, right...
+

stud2813
£3.25 (£3.90 inc VAT)
OEM: 71-2813, E12813
Triumph - Inlet Manifold Stud - 650/750cc Unit Twins - 1972-78 Suitable for 650/750cc Unit Twins from 1972-78 with bolt-on inlet manifolds Overall...
+

wash4794-B18
£3.75 (£4.50 inc VAT)
OEM: 57-4794, 57-2279, T4794, T2279
Triumph Clutch Mainshaft Washer - 500/650/750cc Unit Twins from 1968 onwards OD: 1+3/8" (35mm) ID: 9/16" (14.5mm) Depth: 3/6" (5mm) OEM: 57-4794,...
+

screwkit-81-B9
£26.95 (£32.34 inc VAT)
OEM: 70-3800, E3800, 70-3801, E3801, 70-3802, E3802, 70-3804, E3804, 70-3668, E3668, 57-1401, 57-1402, 57-1944
Engine and Gearbox Cover Screw Set - Triumph 350/500cc Twins 1957-68 Screw set to secure the primary, gearbox and timing cover on unit 3TA, 5TA and T100...
+

off-sump001
£37.95 (£45.54 inc VAT)
Sump Guard / Bash Plate - Triumph Tiger Cub Trials Bikes + Universal Use Designed in association with Sammy Miller, specifically for Triumph Tiger Cub...
+

gk3345
£1.45 (£1.74 inc VAT)
OEM: 70-3345, 70-4872, E3345, E4872
Triumph T20 Tiger Cub Right Hand Timing Case Outer Cover Gasket RH side timing case outer cover gasket correct fitment on T15 and T20 models from 1954...
+

gk-3033
£1.45 (£1.74 inc VAT)
OEM: 67-3033, 64-3106
BSA Gearbox Outer Cover Inspection Cover Gasket - A, B and C Group Models Circa 1948-62 Correct fitment on A7 and A10 plunger and swinging arm models from...
+

gask0589
£1.45 (£1.74 inc VAT)
OEM: 68-0589, 68-589
BSA Tacho Drive Adapter / Nipple Gasket - A50 and A65 Models Circa 1964-72 Rev counter drive nipple washer - locates behind the alloy tachometer drive...
+

fkgk1445
£1.95 (£2.34 inc VAT)
OEM: 71-1445, E11445, 70-6565, E6565
Triumph/BSA Rocker Cover Gasket - T150 and T160 Trident + A75 Models Circa 1968-76 Rocker box inspection cover gasket - correct fitment on all Triumph...
+

headgk0382s
£17.95 (£21.54 inc VAT)
OEM: 67-0382, 67-382, 67-0255, 67-255
Cylinder Head Gasket BSA A7 500cc + A10 650cc Models BSA A7 and A10 models. Gasket hole diameter: 72mm Available in composite or solid annealed  copper...
 

dowel3074-B13
£1.45 (£1.74 inc VAT)
OEM: 66-3074, 70-8010, E8010
BSA Gearbox Cover / Primary Chaincase / Timing Cover Dowel - Various Models From 1949 Onwards Hollow locating dowel used to align the various cases and...
+

fksprock651-B5
£27.95 (£33.54 inc VAT)
OEM: 67-3065
BSA A7, A10 Gearbox Sprocket 19T Chain Pitch: 5/8" x 3/8" (530) Number of Teeth: 19 Please note size of spline is 5/16" on this sprocket, not 1/4" OEM:...

filt893-B3
£15.95 (£19.14 inc VAT)
OEM: 29-7962, 82-9071
Oil Tank Filter - BSA C11, C25, B25, B44, A10 and A7 Models Plunger and rigid frame models. Also fits the Triumph TR25W. Available as standard or UK...

seal461
£2.45 (£2.94 inc VAT)
OEM: 60-3512
OIL SEAL - Triumph Triumph T120/T140 etc 650/750cc 5 Speed Gearbox mainshaft high gear outer, into c/case (1972-83) OEM: 60-3512
+

bolt401-B19
£1.95 (£2.34 inc VAT)
OEM: 14-1401
Triumph 650cc Twin - Cylinder Head Stud - 14-1401 Also fits some of the T140 750cc UNF & UNC OEM: 14-1401
+

gbox321-B8
£8.95 (£10.74 inc VAT)
OEM: 57-1370, 57-0920, T920
Triumph High Gear Bush - 57-1370 Triumph High Gear Bush for T120/TR6 4 speed models. OEM: 57-1370, 57-0920, T920
+

box076-G15
£42.95 (£51.54 inc VAT)
OEM: 60-3213, 60-7091, 99-9990
Speedometer Gearbox, Ratio 1.25:1 Suit Models fitted with Magnetic type speedo after 1966. Wheel spindle hole: 5/8" (16mm) Gearbox drive hole: 2"...
+

smallend1511-B8
£13.95 (£16.74 inc VAT)
OEM: 70-1511, SE106, E1511
Triumph 500/650 Small End Bearing - 70-1511 5T, T100, TR5, 6T, T110, TR6, T120 (1946 -) Small end bush, small end bearing. OEM: 70-1511, SE106, E1511
+

tapp508H-B18
£21.95 (£26.34 inc VAT)
OEM: 70-4676, E4676
Triumph Inlet Tappet Guide Block - 350/500/650cc Models - Circa 1966 Inlet tappet block for the cam followers. Triumph 650cc models T120, TR6 circa...
+

nut3735-B13
£2.95 (£3.54 inc VAT)
OEM: 70-3735
Alternator Rotor Nut - Triumph - 70-3735 To secure the alternator rotor on the shaft. Triumph 350cc and 500cc OEM: 70-3735
+

gearbox1877-B13
£1.25 (£1.50 inc VAT)
OEM: 57-1877, T1877
Triumph Gear Change Return Spring - OEM: 57-1877 Gear selector mechanism, lever return spring, fits the thrust buttons on the end. OEM: 57-1877, T1877
+

gk396
£1.55
OEM: 19-1429, LU200380
BSA Dynamo Gasket - Cork - 19-1429, LU200380 Cork gasket between dynamo and timing gear case OEM: 19-1429, LU200380
+

gkcork34
£5.95 (£7.14 inc VAT)
OEM: 29-8101
Primary Chaincase Gasket - BSA C11G etc - 29-8101 BSA C10L, BSA C11G, BSA C12 1954-1957 Cork Chaincase Joint Washer OEM: 29-8101
+

clutch3267-B23
£4.95 (£5.94 inc VAT)
OEM: 42-3267
BSA Clutch Mainshaft Centre Nut -  A7 and A10 Models With 4 Spring Clutch Correct fitment on A7 and A10 models from 1959-63 fitted with a 4 spring...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.