.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

nut1047-B23
£3.45 (£4.14 inc VAT)
OEM: 57-1047, T1047, 68-3030, 68-3300
Triumph / BSA Clutch Hub Mainshaft Nut - Circa 1953-67 Clutch centre nut for securing the clutch hub to the gearbox shaft. BSA A50, A65 + Triumph T90,...
+

wash9554
£0.35 (£0.42 inc VAT)
OEM: 70-9554, E9554
Triumph Intake Manifold Carburettor Insulating Rubbber Washer - 650/750cc Unit Twins Carburettor mounting washer to fit T120, TR6, T140, TR7 models from...
+

fkgkch005
£2.95 (£3.54 inc VAT)
OEM: 68-0241, 68-875, 68-0875, 71-1432, 70-7854
Primary Chaincase Gasket - BSA A50, A65 Suitable for BSA A50, A65 In order to fit the later engine (from about 1970 on) you will need to enlarge the front...
+

gkt1529
£0.75 (£0.90 inc VAT)
OEM: 70-1529, E1529
Triumph Oil Feed Block Gasket - Pre Unit Models Triumph pre-unit twins - 350, 500, 650cc OEM: 70-1529, E1529
+

wash1045-B23
£6.95 (£8.34 inc VAT)
OEM: 57-1045, T1045, 42-3190, 68-3025, 68-3169
Triumph / BSA Clutch Mainshaft Cupped Washer - 350/500/650cc Twins Circa 1953-1967 Clutch to mainshaft washer for models with a 3 or 4 spring clutch. BSA...
+

wash1574-B13
£1.45 (£1.74 inc VAT)
OEM: 70-1574, E1574, 67-0062, 40-0156, 67-62, 40-156, 06-7698, D12/950, NM18103
Triumph/BSA/Norton Rocker Spindle Thackeray Spring Washer - Various Models Double coil spring thackeray washer - locates on the rocker spindle shaft. As...
+

clutch3236-B23
£1.25 (£1.50 inc VAT)
OEM: 57-0524, 42-3236
Clutch Mainshaft Locking Tab Washer - Pre Unit Triumph / BSA A7 and A10 BSA A7/A10 models from 1959-63 with a 4 spring Triumph type non cush drive...
+

fkrub19
£1.99 (£2.39 inc VAT)
AMC/Norton Gearlever Rubber Atlas, Commando type. L: 2+3/8" Not Branded.
+

seal355-B7
£9.95 (£11.94 inc VAT)
OEM: 40-25, 40-0025, 41-3054, 40-977, 40-0977, 40-679, 40-0679, 57-2641, 40-243, 40-0243, 40-3281, 70-4568, E4568
Oil Seal Set - Engine and Gearbox To suit BSA B25, C25, B44 1967-1972, B50 1971-1972 Contains: Contact point (camshaft) seals, Clutch back plate seal,...
+

rod4008-B17
£3.95 (£4.74 inc VAT)
OEM: 70-4008
Triumph T100/5TA Engine Pushrod As fitted to all 500cc Unit construction Twins (1958-74) Length approx 120-125mm Made in England by LF Harris OEM:...

clutch037-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1736
Triumph T120, T140 Clutch Push Rod Length: 11+13/16" OD: 7/32" 0.219" OEM: 57-1736
+

clutch219-B23
£4.45 (£5.34 inc VAT)
OEM: 57-2159, 68-3308, T2159
Triumph/BSA Clutch Adjusting Screw - 3/8" UNF Clutch adjuster screw/pin for Triumph T120, T140 and BSA A65 models. Use with our steel or billet alloy 3...
+

nut115H-B14
£1.95 (£2.34 inc VAT)
OEM: 21-0692
Triumph Cylinder Base Nut for T120, T140 models (1969-). 12 point multi sided. 3/8" UNF. Also fits some BSA A65 models. OEM: 21-0692
+

dowel8751-B13
£1.95 (£2.34 inc VAT)
OEM: 70-8751, 70-1534, E8751, E1534
Triumph Cylinder Base / Crankcase Halves Hollow Dowel - Pre Unit and Unit Twins and Triples Stud to crankcase hollow dowel as used on various models...
+

rocker4610-009
£3.95 (£4.74 inc VAT)
OEM: 70-3752, E3752, 70-4610, E4610, 71-2744, E12744
Triumph Rocker Box Inspection Cap - Unit 350/500/650cc Models - Circa 1957-74 Rocker box inspection cap - correct fitment on unit construction 3TA, 5TA,...
 

gbox768-B8
£4.95 (£5.94 inc VAT)
OEM: 57-1614
Triumph/BSA Needle Bearing - 57-1614 Layshaft needle bearing, timing side. BSA 750cc Rocket 3, Triumph 500cc/650cc pre Unit twins slick shift box,...
+

wash8343
£0.75 (£0.90 inc VAT)
OEM: 42-8343
Fibre Washer - 1+1/4" - BSA Oil Tank Filter Washer + Universal Uses Correct part for BSA A & B Models, C10L, C12 - oil tank filter washer OD: 1+1/4"...
+

washer150-B18
£2.95 (£3.54 inc VAT)
OEM: 24-4263
BSA Gearbox Sprocket Lockwasher - 24-4263 BSA A, B and M models Gearbox sprocket lockwasher - Tab Washer Secures the nut that holds the rear drive sprocket...
+

clutch1735-B23
£5.45 (£6.54 inc VAT)
OEM: 57-1735
Clutch Thrust Washer - Triumph/BSA  - Early Type with Locating Tabs Fits Triumph 500/650cc unit Twins up to 1969. Also fits BSA 500/650 twins with 3...
+

sump-bolt-washer-set-B3
£3.45 (£4.14 inc VAT)
OEM: 31-222, 31-0222
BSA Alloy Sump Plate Securing Bolts - Non Standard To replace existing studs in crankcase, to allow fitment of the thicker cast-alloy or billet-alloy sump...
+

clutch0433-B23
£3.95 (£4.74 inc VAT)
OEM: 02-0433, 2-433
BSA Clutch Woodruff Key - Adapter to Mainshaft - 6 Spring or Triumph Type 4 Spring Clutch Correct fitment on BSA A7 and A10 models circa 1954-1962 and B...
+

gk1562
£3.95 (£4.74 inc VAT)
OEM: 57-1562, T1562, 57-1217, T1217 - Gasket only, 57-1531
Triumph Gearbox Inner Cover Gasket - 350/500/650cc Pre Unit Models Circa 1950-62 Inner gearbox gasket - correct fitment on all pre unit models from 1950...
+

pipe1149-B3
£3.45 (£4.14 inc VAT)
OEM: 71-1149, E1149
Triumph Front Crankcase Breather Hose/Pipe - 500/650/750cc Twins - 1969-78 Attaches to the breather stub on your crankcase (primary side) Silver...
+

nut3955-B14
£0.65 (£0.78 inc VAT)
OEM: 82-3955, F3955
3/8" CEI Self-Locking Nyloc Nut 3/8" CEI self-locking nyloc nut. deep type - 26TPI OEM: 82-3955, F3955
+

gk-1920
£2.45 (£2.94 inc VAT)
OEM: 66-1920
BSA Timing Case Outer Cover Gasket - B and M Group Models Circa 1939-63 Correct fitment on B31, B32, B33, B34, DBD34, M20, M21 and M33 models. OEM: 66-1920
+

fkrub8
£1.95 (£2.34 inc VAT)
Norton Kick Start Rubber, Norton Logo. Open end.
+

disc2256-B13
£2.95 (£3.54 inc VAT)
OEM: 70-2256, 68-0132, E2256, 68-132
Triumph/BSA Crankcase Rotary Breather Disc Spring - Various Models Correct fitment for many  Triumph 350, 500 & 650 Unit & Pre-Unit models. Also...
+

washer3121-B13
£1.95 (£2.34 inc VAT)
OEM: 40-3121, 40-3050, 57-2702, T2702
BSA/Triumph Gearbox Sprocket Tab Washer - A50, A65 Models + Unit Singles Correct fitment on all A50 and A65 models plus unit BSA and Triumph singles -...
+

filt058-h-B3
£13.95 (£16.74 inc VAT)
OEM: 71-1126, E11126
BSA Oil Sump Plate Filter Gauze -  A7, A10, A50 and A65 Models Usually two gaskets required, one each side of the filter - see related products....
 

fkrub16
£1.95 (£2.34 inc VAT)
Burman Gearlever Rubber AMC, Also fits Ariel, Panther etc Not Branded. Length 2+1/8" Outside diameter 1+1/8". Closed end.
+

filt027-B2
£6.95 (£8.34 inc VAT)
OEM: 70-6571
BSA A75 & Triumph T150, T160 (1965 on) Oil Filter Element Replacement oil filter element. OEM: 70-6571 Avaiable as standard or UK made - please...

valv255-B17
£17.95 (£21.54 inc VAT)
OEM: 70-4221, 70-7400, 99-7037, E4221, E7400
Valve Spring Set - Triumph T120, T140, TR6, TR7 650cc, 750cc Twin (1963-) OEM: 70-4221, 70-7400, 99-7037, E4221, E7400
+

clutch565-B23
£4.95 (£5.94 inc VAT)
OEM: 70-9703, E9703, E4153, 70-4153
TENSION BLADE ADJUSTER NUT- Triumph Triumph T100, T120 Primary Tensioner adjuster sleeve nut. OEM: 70-9703, E9703, E4153, 70-4153
+

gear1417-B4
£2.95 (£3.54 inc VAT)
OEM: 57-1417, T1417
Triumph Gear Change Indicator Plate - 350/500cc Unit Twins - 1957-74 Fits on top of the inner gearbox cover Length 1+7/32" (38.7mm) Mounting holes -...
+

seal1923-B13
£1.95 (£2.34 inc VAT)
OEM: 66-1923
BSA Timing Cover Oil Feed Rubber Washer - Pre Unit B and M Group Camshaft oil seal in timing cover. As fitted to BSA B31, B32, B33, B34 and M20, M21, M33...
+

o/sw2930-B13
£3.95 (£4.74 inc VAT)
OEM: 71-2930, E12930
Triumph Oil Pressure Switch Rubber Boot - Veglia Type Later type as with the Veglia type oil pressure switch. Can also be used instead of the plain type...
+

gk3798
£1.95 (£2.34 inc VAT)
OEM: 70-3798, E3798
Triumph Cylinder Base Gasket - Unit 350/500cc Models Circa 1957-74 Cylinder base washer - correct fitment on all unit 3TA, 5TA, T90, T100 and TR5T...
+

seal358-B7
£11.95 (£14.34 inc VAT)
OEM: E4568, 70-4568, E3833, 70-3833, T1956, 57-1956, T946, 57-0946
Oil Seal Set - Engine and Gearbox To suit Triumph T120, T140, TR7 5 Speed, 1972-1983 Contains: Contact point (camshaft) seals, Crank timing side seal,...
+

kick1422-B4
£5.45 (£6.54 inc VAT)
OEM: 57-1422
Kickstart Stop Plate - Triumph 350/500cc Unit Twins Kickstart return spring plate - 3TA, 5TA, T90 and T100 models circa 1958 onwards. OEM: 57-1422,...
+

nut-DS47-B14
£1.75 (£2.10 inc VAT)
OEM: DS47, DS-47
7/16" x 26 CEI Half Nut - Various Uses on Pre Unit Triumph Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...
+

renold-530/spring-link-B12
£4.95 (£5.94 inc VAT)
530 Renold Classic Motorcycle Chain Spring Connecting Link - 136SR 5/8" x 3/8" Connecting split link with spring to fit Renold 136SR 5/8" x 3/8" (P x W)...
+

washer-set277-B23
£3.95 (£4.74 inc VAT)
OEM: 70-4058, 70-3975, 57-1347, E4058, E3975, T1347
Triumph T20 Tiger Cub Tab Washer Set - Clutch Centre and Rotor Lock Washers - Circa 1960 Onwards Mainshaft / clutch hub lockwasher + two rotor...
+

filt985-B3
£14.95 (£17.94 inc VAT)
OEM: 06-3139
Oil Filter Mounting Block/Head - Norton Commando Models + Universal Fit Correct for Norton 750/850cc Commando Models, can also be used of universal...

gk3754
£0.95 (£1.14 inc VAT)
OEM: 70-3763, E3763, 71-1458, 71-3754
Triumph Oil Junction Block Gasket - 500/650/750cc Unit Twins - 4 Hole 3 hole version also available - see related products. OEM: 70-3763, E3763,...
+

clplt340p-T-B24
£6.95 (£8.34 inc VAT)
OEM: 57-1363, 57-0415, T415
Triumph 350/500/650/750 Clutch Steel Plates Inside Diameter: 98mm (between stubs) Outside Diameter: 150mm Stub Length: 6mm OEM: 57-1363, 57-0415, T415,...
+

clutch1931H-B24
£3.95 (£4.74 inc VAT)
OEM: T1931, 57-1931, 68-3287, 42-3197, 57-0998
Triumph/BSA Clutch Spring Cup - 3 or 4 Spring - Pre Unit and Unit Models - 1951 Onwards To fit 3 spring AND 4 spring clutch plate hubs. Correct fitment...
+

clutch6061-B18
£8.95 (£10.74 inc VAT)
OEM: 70-6061, E4149, 70-4149, E6061
Triumph 650cc Duplex Chain Tensioner Blade - 70-6061 Also suitable for 350/500cc models Triumph Twins, primary chain tensioner blade. For duplex chains....
+

washer1713
£0.99 (£1.19 inc VAT)
OEM: 82-1713
Washer - Triumph Oil Filter Adapter - 82-1713 Fits between the filter and the tank. Suit Triumph and BSA OEM: 82-1713, 40-8331
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.