Engine & Transmission

CODE: fkgk3552

Triumph Rocker Box Gasket - Pre Unit 650cc Alloy Head Models Circa 1956-62

£1.95 (£2.34 inc VAT)

OEM: 70-3552, E3552

Triumph Rocker Box Gasket - Pre Unit 650cc Alloy Head Models Circa 1956-62 Joint washer for alloy head models. Correct fitment on T110, T120 and 6T models...

Quantity:

+ −

CODE: rocker2079-B4

Triumph Rocker Box Inspection Plug - 500/650cc Unit Twins From 1971 Onwards

£1.95 (£2.34 inc VAT)

OEM: 71-2079, E12079

Triumph Rocker Box Inspection Plug - 500/650cc Unit Twins From 1971 Onwards Threaded alloy tappet access cap - correct fitment on T100, T120 and TR6...

Quantity:

+ −

CODE: clplt1315-B24

Triumph T20 Tiger Cub Clutch Driven/Steel Plate - All Models From 1954 Onwards

£7.45 (£8.94 inc VAT)

OEM: 57-1315, T1315

Triumph T20 Tiger Cub Clutch Driven/Steel Plate - All Models From 1954 Onwards Plain steel driven plate as used on all T15 Terrier and T20 Tiger Cub...

Quantity:

+ −

CODE: spr0429-B24

Triumph Clutch Spring - 9 Plate / 4 Spring - 350/500cc Pre Unit + 3TA and 5TA Models

£1.95 (£2.34 inc VAT)

OEM: 57-0429, T429

Triumph Clutch Spring - 9 Plate / 4 Spring - 350/500cc Pre Unit + 3TA and 5TA Models Correct fitment on models with a four spring clutch with 4 driving...

Quantity:

+ −

OEM: 57-1549, 42-3266, 57-0985, T985, T1549

CODE: clutch475t-B20

Triumph Pre-Unit 500/650cc Clutch Chainwheel

£43.95 (£52.74 inc VAT)

OEM: 57-1549, 42-3266

Triumph Pre-Unit 500/650cc Clutch Chainwheel Number of Teeth: 43T Chain Type: Single OEM: 57-1549, 42-3266, 57-0985, T985, T1549

Quantity:

+ −

Triumph T20 Tiger Cub - 420 Chain Gearbox Sprocket - 14T - Talon

CODE: off-gsprk402/420-13

Triumph T20 Tiger Cub - 420 Chain Gearbox Sprocket - 13T, 14T or 17T - Talon

£19.95 (£23.94 inc VAT)

OEM: 57-1555, T1555, 57-1513, T1513

Triumph T20 Tiger Cub - 420 Chain Gearbox Sprocket - 13T, 14T or 17T - Talon Front sprocket suitable for Triumph Tiger Cub trials/competition models...

Options

CODE: plug1871-B13

Triumph Tacho Drive Blanking Plug - 650/750cc Twins From 1969 Onwards - LH Thread

£2.95 (£3.54 inc VAT)

OEM: 21-1871, S1871

Triumph Tacho Drive Blanking Plug - 650/750cc Twins From 1969 Onwards - LH Thread Screw that plugs the hole in the drive side crankcase when a tachometer...

Quantity:

+ −

70-4547, E4547,�70-4547/080 - Triumph 9 Hole Cylinder Head Gasket - Unit 650cc Models Circa 1963-72 - Standard

CODE: headgk042-standard

Triumph 9 Hole Cylinder Head Gasket - Unit 650cc Models Circa 1963-72 - Standard or Extra Thick

£15.95 (£19.14 inc VAT)

OEM: 70-4547, E4547, 70-4547/080

Triumph 9 Hole Cylinder Head Gasket - Unit 650cc Models Circa 1963-72 - Standard or Extra Thick Solid copper cylinder head gasket as fitted to 9 stud TR6...

Options

CODE: fkchainsss520

520 Standard Classic Motorcycle 135RESR 5/8" x 1/4" Chain - Triple SSS - 102 to 130 Links

£17.95 (£21.54 inc VAT)

OEM: 110054

520 Standard Classic Motorcycle 135RESR 5/8" x 1/4" Chain - Triple SSS - 102 to 130 Links Supplied with a connecting spring link. 135RESR 5/8" x 1/4"...

Select Options

CODE: gear1435-B8

Triumph Gear Change Lever - Unit 350/500cc Twins - Circa 1958-74

£29.95 (£35.94 inc VAT)

OEM: 57-1435, T1435

Triumph Gear Change Lever - Unit 350/500cc Twins - Circa 1958-74 Chrome plate gear shift lever - correct fitment on 3TA, 5TA, T21, T90 and T100 models...

Quantity:

+ −

CODE: clutch4435-B23

Triumph / BSA Complete Clutch Centre / Shock Absorber Assembly - Unit Twins - Three Spring Clutch

£119.95 (£143.94 inc VAT)

OEM: 57-4435, T4435

Triumph / BSA Complete Clutch Centre / Shock Absorber Assembly - Unit Twins - Three Spring Clutch Correct fitment on later T120, all T140 and TR7 models....

Quantity:

+ −

CODE: tapp470-B18

Triumph / BSA Hexagonal Tappet Nut - OEM: 70-0470

£1.25 (£1.50 inc VAT)

OEM: 70-0470

Hexagonal Tappet Nut- Triumph T120/T140 and BSA A7/A10 OEM: 70-0470 CEI thread Made in England

Quantity:

+ −

CODE: seal508

Gearbox Oil Seal - B31, B33, M20, M21 - 65-3508

£4.45 (£5.34 inc VAT)

OEM: 65-3508

BSA Final drive Gearbox Oil Seal. B31, B33, M20, M21 - 65-3508 OEM: 65-3508

Quantity:

+ −

CODE: nut267-B18

Triumph/BSA Crankshaft Sludge Trap Plug - 750cc

£5.45 (£6.54 inc VAT)

OEM: 71-2800, 68-0184

Triumph T120/T140 (1968-) Hexagonal crank plug, UNF threads. Also fits some BSA A50 and A65 models Made in England. OEM: 71-2800, 68-0184

Quantity:

+ −

CODE: clutch1552S-B23

Triumph Clutch Operating / Push Rod - Pre Unit Models With 5 Plate Clutch Circa 1950-62

£8.95 (£10.74 inc VAT)

OEM: 57-1552, 57-0455B, T1552, T455B

Triumph Clutch Operating / Push Rod - Pre Unit Models With 5 Plate Clutch Circa 1950-62 Hardened steel clutch operating rod - correct fitment on pre unit...

Options

60-2640, D2640 - O RING - Triumph Gear Shaft

CODE: seal2640

O RING - Triumph Gear Shaft - 60-2640

£1.00 (£1.20 inc VAT)

OEM: 60-2640, D2640

O RING - Triumph Gear Shaft - 60-2640 Fits in the primary chain case, for the gearshaft hole. OEM: 60-2640, D2640

Quantity:

+ −

CODE: clutch2063H-B23

Clutch Cable Abutment - Long Slotted Ferrule Type - Triumph Unit Twins 1963-70

£2.95 (£3.54 inc VAT)

OEM: 57-2063

Clutch Cable Abutment - Long Slotted Ferrule Type - Triumph Unit Twins 1963-70 Overall Length: 7/8" (22mm) Diameter: 7/16" (11mm) OEM: 57-2063

Quantity:

+ −

CODE: plug2259-B13

Triumph Primary Chain Oil Drain and Adjuster Plug - 650/750cc - 1969 Onwards

£4.95 (£5.94 inc VAT)

OEM: 57-2259, T2259

Triumph Primary Chain Oil Drain and Adjuster Plug - 650/750cc - 1969 Onwards Triumph Unit Twins - T120 from 1969-72, T140 from 1973-79. 7/16" UNC Thread...

Quantity:

+ −

CODE: nut0398-B18

Triumph Crankshaft Timing Pinion Nut - 500/650cc Pre-Unit Models

£6.95 (£8.34 inc VAT)

OEM: 70-0398, E398

Triumph Crankshaft Timing Pinion Nut - 500/650cc Pre-Unit Models 3/4" x 20 TPI - Stainless steel OEM: 70-0398, E398

Quantity:

+ −

CODE: clip0489-B13

Triumph/BSA Gearbox High Gear Bearing Circlip - Pre Unit and Unit Models From 1939 Onwards

£4.95 (£5.94 inc VAT)

OEM: 70-0489 57-0489, E489, T489, 68-0024

Triumph/BSA Gearbox High Gear Bearing Circlip - Pre Unit and Unit Models From 1939 Onwards Timing side high gear main bearing circlip as used on all pre...

Quantity:

+ −

CODE: kick3028-B4

BSA/Triumph Kickstart Return Spring - Tiger Cub + C15 and B40 Models

£7.95 (£9.54 inc VAT)

OEM: 40-3028, 57-1162, T1162

BSA/Triumph Kickstart Return Spring - Tiger Cub + C15 and B40 Models Correct fitment on all T15, T20 Tiger Cub and C15 models + B40 distributor models ....

Quantity:

+ −

CODE: seal352-B7

Oil Seal Set - Engine and Gearbox - BSA C15 and B40 Side Points Models - Circa 1964-66

£10.95 (£13.14 inc VAT)

OEM: 40-0025, 40-0243, 40-0679, 40-3281, 40-0977

Oil Seal Set - Engine and Gearbox - BSA C15 and B40 Side Points Models - Circa 1964-66 Suitable for C15 and B40 Sport Star models with side points circa...

Quantity:

+ −

CODE: bearing4100-F4

Triumph Gearbox Mainshaft High Gear Bearing - 5 Speed Twins and Triples Circa 1971-85

£44.95 (£53.94 inc VAT)

OEM: 60-4100, D4100

Triumph Gearbox Mainshaft High Gear Bearing - 5 Speed Twins and Triples Circa 1971-85 Gearbox high gear roller bearing with riveted brass cage with 13...

Quantity:

+ −

CODE: spr033-B-B24

BSA A50, A65 Clutch Spring

£1.95 (£2.34 inc VAT)

OEM: 57-1830, 68-3321, 57-1769, 68-3288

BSA Clutch Spring, for BSA A50, A65 Price is for One Spring Length: 1+3/4" (45mm) Diameter: 5/8" (16mm) OEM: 57-1830, 68-3321, 57-1769, 68-3288

Quantity:

+ −

CODE: seal136-C13

Triumph Oil Seal - Crankshaft Drive Side

£1.95 (£2.34 inc VAT)

OEM: 70-3876

OIL SEAL - Triumph Crankshaft D/S Oil seal for Triumph 3TA/5TA/T90/T100 (1957-72), T120/TR6 (1963-70). OEM: 70-3876

Quantity:

+ −

CODE: gkt608

BSA M20, M21 etc - Outer Gearbox Gasket - 66-3131

£2.45 (£2.94 inc VAT)

OEM: 66-3131

BSA M20, M21 etc - Outer Gearbox Gasket Suitable for the later gearbox, the early WD gearbox uses a different gasket. OEM: 66-3131

Quantity:

+ −

CODE: wash4909-B13

Gearbox Mainshaft Lock Tab Washer 57-4909

£1.99 (£2.39 inc VAT)

OEM: 57-4909, T4909

Gearbox Mainshaft Lock Tab Washer 57-4909 Lock tab washer for end of gearbox shaft, usually T140 5 speed box, T150, T160 etc. OEM: 57-4909, T4909,...

Quantity:

+ −

CODE: gk-1541

Triumph Gearbox Inspection Cover Gasket - Pre Unit Models Circa 1958-62

£0.95 (£1.14 inc VAT)

OEM: 57-1541, T1541

Triumph Gearbox Inspection Cover Gasket - Pre Unit Models Circa 1958-62 Correct fitment on 6T, T100, T110, TR6 and T120 pre-unit models. OEM: 57-1541, T1541

Quantity:

+ −

CODE: plug3668-B13

Triumph Gearbox Oil Drain and Level Plug Assembly - Unit 650/750cc Models - 1968 Onwards

£5.95 (£7.14 inc VAT)

OEM: 57-3668, 57-2167, T2167, T3668, 57-3851, T3851

Triumph Gearbox Oil Drain and Level Plug Assembly - Unit 650/750cc Models - 1968 Onwards Correct fitment on T120, TR6 and T140, TR7 unit twins from 1968...

Quantity:

+ −

CODE: tube4704-B13

Triumph Primary Chain Oiler Tube - Unit 650/750cc Models From 1963 Onwards

£2.45 (£2.94 inc VAT)

OEM: 70-4704, E4704, 71-1078, E11078

Triumph Primary Chain Oiler Tube - Unit 650/750cc Models From 1963 Onwards Correct fitment on unit 650cc models - 6T, T120, TR6 from 1963 onwards + T140...

Quantity:

+ −

CODE: clutch0453-B23

Triumph Clutch Operating Arm Adjusting Pin Lock Nut - Pre Unit 350/500/650cc Models

£1.45 (£1.74 inc VAT)

OEM: 57-0453, T453, 60-4261

Triumph Clutch Operating Arm Adjusting Pin Lock Nut - Pre Unit 350/500/650cc Models Lock nut for use with the clutch pushrod adjuster screw as fitted to...

Quantity:

+ −

CODE: tappet8801-LFH

Triumph Exhaust Cam Follower Tappet - 650/750cc Unit Twins - Circa 1968-1980

£38.95 (£46.74 inc VAT)

OEM: 70-8801, E8801

Triumph Exhaust Cam Follower Tappet - 650/750cc Unit Twins - Circa 1968-1980 Single exhaust tappet / cam follower with oil hole, sits in the tappet block...

Options

CODE: gear1181

Triumph Gearchange Spindle Felt Washer - T20 Tiger Cub Models Circa 1954-67

£1.25 (£1.50 inc VAT)

OEM: 57-1181, T1181

Triumph Gearchange Spindle Felt Washer - T20 Tiger Cub Models Circa 1954-67 Gear change quadrant shaft felt seal - correct fitment on T20 Tiger Cub...

Quantity:

+ −

CODE: fkgk318

BSA - 500/600cc SV M20, M21 Engine Gasket Set 1939-49

£24.95 (£29.94 inc VAT)

BSA Motorcycle - 500/600cc SV M20, M21 Engine Gasket Set 1939-49

Quantity:

+ −

CODE: bolt014-B19

Con Rod Big End Bolt Triumph T120

£8.95 (£10.74 inc VAT)

OEM: 70-6576, 21-2016, 70-2490, E2490, E6576

BIG END BOLT - Triumph Triumph Big end bolt, T120/TR6/6T and others Thread: 5/16" UNF - 24 TPI Note - the correct nut that fits this is 60-3761 see link...

Quantity:

+ −

CODE: valve2899

Triumph Inlet Valve Guide - Pre Unit 500/650cc Models Circa 1946-66 - Standard or Oversize

£9.45 (£11.34 inc VAT)

OEM: E2899, 70-2899, E1480, 70-1480, G420

Triumph Inlet Valve Guide - Pre Unit 500/650cc Models Circa 1946-66 - Standard or Oversize Correct fitment on 5T models circa 1946-59, TR5 models circa...

Select Options

CODE: valve094-B22

Triumph 650cc Inlet Valve - 70-4603

£16.95 (£20.34 inc VAT)

OEM: E4603, 70-4603

Triumph 650cc/750cc Inlet Valve - 70-4603 Triumph T120 Bonneville (1963-72) TR6 from Eng. No. (1966-72) Inlet Valve (Alpha valve no.V245) Also for T140...

Quantity:

+ −

70-3828, E3828, G424PB - Triumph Exhaust Valve Guide - T120 Bonneville Models Circa 1959-72

CODE: vguide3828

Triumph Exhaust Valve Guide - T120 Bonneville Models Circa 1959-72 - Standard or Oversize

£11.95 (£14.34 inc VAT)

OEM: 70-3828, E3828, G424PB

Triumph Exhaust Valve Guide - T120 Bonneville Models Circa 1959-72 - Standard or Oversize Length: 2+9/32", 2.27" (57.7mm) Available as standard, +.002...

Select Options

CODE: enginenut-3977-B13

Alternator Rotor Locknut - Triumph - 70-3977

£2.95 (£3.54 inc VAT)

OEM: E3977, 70-3977

Alternator Rotor Locknut - Triumph - 70-3977 For mounting the alternator magnet rotor on the crankshaft. Pre-unit Triumph engines, and other models....

Quantity:

+ −

CODE: bolt574-B19

BSA A7, A10 Magneto Bolt - 67-1259

£3.95 (£4.74 inc VAT)

OEM: 67-1259

BSA A7, A10 Magneto Bolt - 67-1259 BSA A7/A10 extended magneto fixing bolt Mounts the magneto to the engine, this is the lover fixing bolt that can't be...

Quantity:

+ −

CODE: seal7363-B13

Valve Seal - Triumph - 60-7363

£1.95 (£2.34 inc VAT)

OEM: 60-7363, 06-2726, D7363, 062726

Valve Guide Oil Seal - Triumph/Norton - 60-7363, 06-2726 Inlet valve guive valve seal, as fitted to Triumph T140, Norton Commando and other models Valve...

Quantity:

+ −

CODE: gkch1702

Primary Chaincase Gasket - BSA A10, A7 Plunger/Rigid - 67-1702

£2.99 (£3.59 inc VAT)

OEM: 67-1702

Primary Chaincase Gasket - BSA A10, A7 Plunger/Rigid - 67-1702 Suitable for BSA Plunger frame, or Rigid frame A models, A7, A10 etc. Fits the BSA A10...

Quantity:

+ −

CODE: nut0449-B14

3/8" CEI Nut - BSA Rocker Spindle / Timing Cover / Brake Cam Nut

£0.50 (£0.60 inc VAT)

OEM: 02-0449

3/8" CEI Nut - BSA Rocker Spindle / Timing Cover / Brake Cam Nut 3/8" x 26 CEI Thin OEM: 02-0449

Quantity:

+ −

CODE: kick1426-B4

Triumph Kickstart Pawl Retaining Disc - 350/500cc Unit Models - 1958 Onwards

£2.45 (£2.94 inc VAT)

OEM: 57-1426, T1426

Triumph Kickstart Pawl Retaining Disc - 350/500cc Unit Models - 1958 Onwards Correct fitment on T90, 3TA, 5TA, T100 models circa 1958-74. OD: 1+11/16"...

Quantity:

+ −

CODE: seal3168

O Ring Nitrile Seal - ID: 1/2", OD: 5/8", Width: 1/16" - Various Applications

£0.45 (£0.54 inc VAT)

OEM: 68-3168, 57-2697, T2697

O Ring Nitrile Seal - ID: 1/2", OD: 5/8", Width: 1/16" - Various Applications Various uses on BSA/Triumph models including drain plug seal on some...

Quantity:

+ −

CODE: fkgk332

BSA - 440cc Victor, B44, B40G Engine Gasket Set 1964-70

£31.95 (£38.34 inc VAT)

BSA Motorcycle - 440cc Victor, B44, B40G Engine Gasket Set 1964-70

Quantity:

+ −

CODE: regina428

428 Regina Classic Motorcycle Chain - 126SR 1/2" x 5/16" - 100 to 130 Links

£43.95 (£52.74 inc VAT)

OEM: 110046

428 Regina Classic Motorcycle Chain - 126SR 1/2" x 5/16" - 100 to 130 Links Supplied with a connecting spring link. 126SR 1/2" x 5/16" (P x W) standard...

Select Options

CODE: box076p-G15

Speedometer Gearbox 1.25:1 - BSA, Triumph T120 and T150

£41.95 (£50.34 inc VAT)

OEM: 60-3213, 60-7091, 99-9990

Speedometer Gearbox, Ratio 1.25:1 Suit Models fitted with Magnetic type speedo after 1966. Wheel spindle hole: 5/8" (16mm) Gearbox drive hole: 2"...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

Account Details

Quick Links

Feked.com

Feked Online