Engine & Transmission :: Engine Lower

CODE: screwkit-12-B9

Allen Screw Kit - BSA A7, A10, Swing Arm Model

£12.95 (£15.54 inc VAT)

OEM: 65-3063, 67-1706, 67-1711, 42-7517, 67-0133, 67-0132, 65-3063

Allen Screw Kit - BSA A7, A10, Swing Arm Model Set of Allen screws to fit the BSA A7 500cc and BSA A10 650cc models with swing arm frame. This kit has the...

Quantity:

+ −

CODE: enginestud-2199-B19

Long Alternator/Stator Stud Triumph 750 Twins - 1972-82

£5.95 (£7.14 inc VAT)

OEM: 21-2199

Long Alternator/Stator Stud Triumph 750 Twins - 1972-82 Alternator Stator Stud suitable for 750cc Triumph T140 Bonneville & TR7 models from...

Quantity:

+ −

15-0152, 15-152, NM16187, 06-7664 - 7/16" x 20 TPI Nut

CODE: nut0152-B14

7/16" x 20 TPI Nut - BSA M20 & M21 Cylinder Base Nut + Norton Bottom Yoke Nut

£3.45 (£4.14 inc VAT)

OEM: 15-0152, 15-152, NM16187, 06-7664

7/16" x 20 TPI Nut - BSA M20 & M21 Cylinder Base Nut + Norton Bottom Yoke Nut Height: 7/16" (10.8mm) OEM: 15-0152, 15-152, NM16187, 06-7664

Quantity:

+ −

CODE: pipe5290-B13

Triumph Breather Hose 'T' Piece - 750cc Unit Twins - 1974 Onwards

£9.45 (£11.34 inc VAT)

OEM: 83-5290, F15290

Triumph Breather Hose 'T' Piece - 750cc Unit Twins - 1974 Onwards Crankcase breather pipe connector for T140, TR7 Models from 1974 onwards. Small pipe...

Quantity:

+ −

CODE: plug0615-B18

BSA Small Journal Crankshaft Sludge Trap Plug - A7 and A10 Models Circa 1947-62

£6.45 (£7.74 inc VAT)

OEM: 65-0615, 65-615

BSA Small Journal Crankshaft Sludge Trap Plug - A7 and A10 Models Circa 1947-62 To fit small journal crankshafts as used on A7 models from 1947-62 and A10...

Quantity:

+ −

CODE: bolt9330-B13

Triumph Oilway Plug Bolt - 650/750cc Unit Twins From 1968 Onwards

£0.95 (£1.14 inc VAT)

OEM: 70-9330, E9330

Triumph Oilway Plug Bolt - 650/750cc Unit Twins From 1968 Onwards Crankcase timing side oil way plug as fitted to T120, TR6 models from 1968 onwards + all...

Quantity:

+ −

CODE: oilseal1242

BSA Primary Chaincase Oil Seal - A7 and A10 Rigid/Plunger Frame Models - Circa 1947-57

£2.95 (£3.54 inc VAT)

OEM: 67-1242

BSA Primary Chaincase Oil Seal - A7 and A10 Rigid/Plunger Frame Models - Circa 1947-57 Chaincase / gearbox mainshaft oil seal - correct fitment on...

Quantity:

+ −

57-1381, 57-1556, T1381, T1556 - Triumph Clutch Oil Seal Retaining Plate - Pre Unit Twins From 1957 Onwards

CODE: wash1381-B23

Triumph Clutch Oil Seal Retaining Plate Washer - Pre Unit Twins From 1957 Onwards

£2.45 (£2.94 inc VAT)

OEM: 57-1381, 57-1556, T1381, T1556

Triumph Clutch Oil Seal Retaining Plate - Pre Unit Twins From 1957 Onwards Oil sealing washer, locates within the inner chaincase behind the retaining...

Quantity:

+ −

27-4258 - BSA Gearbox Inspection Cover Hex Head Screw - A, B, C and M Group Models

CODE: screw4258-B13

BSA Gearbox Inspection Cover Hex Head Screw - A, B, C and M Group Models From 1938 Onwards

£3.95 (£4.74 inc VAT)

OEM: 27-4258

BSA Gearbox Inspection Cover Hex Head Screw - A, B, C and M Group Models Stepped hex head screw that secures the gearbox inspection cover plate - correct...

Quantity:

+ −

CODE: screw1907-B19

Triumph Inner Gearbox Cap Screw - Later 650cc + All 750cc Twins From 1969 Onwards

£0.95 (£1.14 inc VAT)

OEM: 21-1907, 14-7020, S1907

Triumph Inner Gearbox Cap Screw - Later 650cc + All 750cc Twins From 1969 Onwards Inner gearbox cap screw on later T120 and TR6 models + all T140 and TR7...

Quantity:

+ −

70-4098, E4098 - 5/16" CEI - 1+7/8" Crankcase Bolt - Unit 650cc + T20 Tiger Cub Models Circa 1960-68

CODE: bolt4098-B14

5/16" BSF - 1+7/8" Crankcase Bolt - Unit 650cc + T20 Tiger Cub Models Circa 1960-68

£2.45 (£2.94 inc VAT)

OEM: 70-4098, E4098

5/16" BSF - 1+7/8" Crankcase Bolt - Unit 650cc + T20 Tiger Cub Models Circa 1960-68 Small hex, part threaded crankcase bolt. One bolt required on unit...

Quantity:

+ −

CODE: plug3190-B13

BSA Gearbox Drain Plug and Level Tube - Unit Singles Circa 1965-67

£5.95 (£7.14 inc VAT)

OEM: 40-3190

BSA Gearbox Drain Plug and Level Tube - Unit Singles Circa 1965-67 Correct fitment on C15, B25, C25, B40, B44 models from 1965-67. Thin hexagon head -...

Quantity:

+ −

CODE: shim1707-B13

BSA Cush Drive Bearing Alignment Washer - B & M Group Models - 1940-63

£1.25 (£1.50 inc VAT)

OEM: 66-1707

BSA Cush Drive Bearing Alignment Washer - B & M Group Models - 1940-63 0.32" cush drive bearing to engine sprocket washer as used on B31, B32, B33,...

Quantity:

+ −

CODE: stud1864-B19

Triumph Crankcase to Oil Pump Stud - 500/650cc Models From 1969 Onwards + 750cc Twins Circa 1973-79

£1.25 (£1.50 inc VAT)

OEM: 21-1864, S1864

Triumph Crankcase to Oil Pump Stud - 500/650cc Models From 1969 Onwards + 750cc Twins Circa 1973-79 Oil pump body to crankcase fixing stud with UNF/UNC...

Quantity:

+ −

CODE: seal0243

BSA/Triumph Clutch Back Plate Oil Seal - Unit Singles Circa 1959-72

£1.95 (£2.34 inc VAT)

OEM: 40-0243, 70-3833, E3833

BSA/Triumph Clutch Back Plate Oil Seal - Unit Singles Circa 1959-72 Clutch / primary case backing plate oil seal. Suitable for C15, C25, B25, B40, B44,...

Quantity:

+ −

CODE: rollers192-B18

1/4inch Big End Bearing Rollers - 10 Pack

£2.99 (£3.59 inc VAT)

1/4" x 1/4" Big End Rollers Sold in packs of 10 rollers

Quantity:

+ −

CODE: fkscrew200-B9

Stainless Steel Allen Screw Kit - BSA B31, B32, B33, B34

£15.95 (£19.14 inc VAT)

Stainless Steel Allen Screw Kit - BSA B31, B32, B33, B34 Suit BSA B31, B32, B33, B34 models. Complete Set, includes allen keys. Stainless Steel....

Quantity:

+ −

CODE: bolt-set0011-B14

Cylinder Head Bolt Set - BSA M20/M21 Alloy Head - 1950 Onwards

£23.95 (£28.74 inc VAT)

OEM: 36-0011, 36-11

Cylinder Head Bolt Set - BSA M20/M21 Alloy Head - 1950 Onwards High quality BZP plated high tensile bolts with correct shanks for use with alloy heads...

Quantity:

+ −

CODE: seal3616

Triumph/BSA Oil Filler Cap O Ring - Unit Models from 1971-83

£0.95 (£1.14 inc VAT)

OEM: 60-3616, D3616

Triumph/BSA Oil Filler Cap O Ring - Unit Models from 1971-83 O Ring Seal to fit oil filler cap on Triumph/BSA OIF models from 1971 on OD: 1+1/4" (32mm)...

Quantity:

+ −

14-6608 - Triumph Chaincase Timing Cover Cheese Head Screw

CODE: bolt6608-B13

Triumph Chaincase / Timing Cover Cheese Head Screw - 1969 onwards

£1.45 (£1.74 inc VAT)

OEM: 14-6608

Triumph Chaincase / Timing Cover Cheese Head Screw - 1969 onwards Length 1" x 1/4'' UNC thread Made in England OEM: 14-6608

Quantity:

+ −

66-1435 - BSA Exhaust Lifter / Decompressor Spindle - M20, M21

CODE: lift1435-B13

BSA Exhaust Lifter / Decompressor Spindle - M20, M21 from 1937-63 - NOS

£17.95 (£21.54 inc VAT)

OEM: 66-1435

BSA Exhaust Lifter / Decompressor Spindle - M20, M21 from 1937-63 Exhaust valve lifter spindle for pre-unit M Group. This is an original new old stock...

Quantity:

+ −

66-0661, 66-661 - BSA Crankshaft Drive Side Shim - B & M Group Models

CODE: shim0661-B18

BSA Crankshaft Drive Side Shim - B & M Group Models - 1940-63

£3.45 (£4.14 inc VAT)

OEM: 66-0661, 66-661

BSA Crankshaft Drive Side Shim - B & M Group Models - 1940-63 ID: 1" (25.4mm) OD: 1+9/16" (39.7mm) Thickness: 0.022" (0.5mm) Made in England OEM:...

Quantity:

+ −

CODE: plug4922-B13

Triumph Primary Chain Oil Drain and Adjuster Plug - Long Type - 650cc Twins from 1962-65

£3.25 (£3.90 inc VAT)

OEM: 70-4922, E4922

Triumph Primary Chain Oil Drain and Adjuster Plug - Long Type - 650cc Twins from 1962-65 Long type with BSF thread - used on 6T, T120 and TR6 models...

Quantity:

+ −

CODE: enginestud-4537-B13

Triumph Short Alternator Mounting Stator Stud - 650cc Models Circa 1963-68

£8.95 (£10.74 inc VAT)

OEM: 70-4537, E4537

Triumph Short Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Rear stator stud, correct fitment on unit 6T, T120 and TR6 models circa...

Quantity:

+ −

CODE: bolt3767-B13

Triumph Gearbox Adjuster Pivot Pin - Pre Unit 500/650cc Models Circa 1956-59

£5.95 (£7.14 inc VAT)

OEM: 82-3767, F3767

Triumph Gearbox Adjuster Pivot Pin - Pre Unit 500/650cc Models Circa 1956-59 Abutment pin to fit T100, 6T, T110, T120, TR6 models circa 1956-59. Made in...

Quantity:

+ −

CODE: seal289

BSA/Triumph Contact Breaker / Camshaft Oil Seal - Unit Singles From 1964 Onwards

£1.95 (£2.34 inc VAT)

OEM: 40-0679, 70-8153, E8153

BSA/Triumph Contact Breaker / Camshaft Oil Seal - Unit Singles From 1964 Onwards Camshaft oil seal, locates behind the contact plate - correct fitment on...

Quantity:

+ −

CODE: bolt4539-B13

Triumph Crankcase Oilway Plug - Unit 650cc Models Circa 1963-68

£0.75 (£0.90 inc VAT)

OEM: 70-4539, E4539

Triumph Crankcase Oilway Plug - Unit 650cc Models Circa 1963-68 Crankcase level plug / bolts - locates in the lower mid section of the crankcase below...

Quantity:

+ −

CODE: pump-mor-12

Triumph Plunger Type Oil Pump - Pre War 250/350/500cc Singles Circa 1934-39

£109.95 (£131.94 inc VAT)

OEM: 70-0855, 70-1353, E855, E1353

Triumph Plunger Type Oil Pump - Pre War 250/350/500cc Singles Circa 1934-39 A high performance dual plunger oil pump for early Triumph singles including:...

Quantity:

+ −

CODE: pump-mor-15

Ariel Plunger Type Oil Pump - 350/500/600cc Singles Circa 1929-58 - Made in England by Morgo

£119.95 (£143.94 inc VAT)

OEM: 2212-29F

Ariel Plunger Type Oil Pump - 350/500/600cc Singles Circa 1929-58 - Made in England by Morgo A high performance dual plunger oil pump for s uitable for...

Quantity:

+ −

CODE: plug1505-B13

BSA Oil Pressure Release Valve Plug - A7, A10, A50, A65, B40, B25 and C15 Models

£6.95 (£8.34 inc VAT)

OEM: 67-1505, 70-8123, E8123

BSA Oil Pressure Release Valve Plug - A7, A10, A50, A65, B40, B25 and C15 Models Correct fitment on all A7, A10 and B40 models + early A50 and A65...

Quantity:

+ −

CODE: pmp202-hep

Triumph Plunger Type Oil Pump - Unit Twins From 1959 Onwards - Hepolite

£104.95 (£125.94 inc VAT)

OEM: 70-6928, 71-7317, 70-9421, 70-3878, E6928, E17317, E9421, E3878

Triumph Plunger Type Oil Pump - Unit Twins From 1959 Onwards - Hepolite Premium quality new production Hepolite oil pump suitable for all 350cc, 500cc,...

Quantity:

+ −

CODE: filt060-B2

Oil Sump Filter Gauze - Triumph T140 Bonneville

£23.95 (£28.74 inc VAT)

OEM: 83-2646, 84-0027, 83-4783

Triumph T140 Bonneville Oil Sump Gauze Fits early model T140. Normally uses 2 gaskets when you replace this, one each side. See related gasket below OEM:...

Quantity:

+ −

CODE: seal357-B7

Oil Seal Set - Engine and Gearbox - Norton Commando 1968-1975

£13.95 (£16.74 inc VAT)

OEM: 06-2726, 062726, 034053, 048023, NMT272, NMT2187, 040132

Oil Seal Set - Engine and Gearbox To suit Norton Commando 750cc, 850cc, 1968-1975 Includes the valve stem seals 06-2726 OEM: 06-2726, 062726, 034053,...

Quantity:

+ −

CODE: bear021

Ball Bearing RLS8 - Sealed

£5.95 (£7.14 inc VAT)

OEM: 89-3022

Ball Bearing RLS8 - 2RS Range of uses including: Wheel bearing RLS8, wheel bearing, transmission and engine bearing Imperial sized bearing for British...

Quantity:

+ −

CODE: bolt736H-B19

Triumph T140 Cylinder Head Stud - 21-2201

£5.95 (£7.14 inc VAT)

OEM: 21-2201

Triumph T140 Cylinder head stud (outer 3/8" Stud) OEM: 21-2201

Quantity:

+ −

CODE: enginestud-1399-B19

Gearbox Outer Cover Stud - Triumph - 57-1399

£2.95 (£3.54 inc VAT)

OEM: T1399, 57-1399

Gearbox Outer Cover Stud - Triumph - 57-1399 Fits the Triumph off-side gearbox cover. OEM: T1399, 57-1399 Made in England

Quantity:

+ −

CODE: bolt0543-B18

Triumph Gearbox Oil Level Drain Plug Bolt - 650/750cc - 1970 Onwards

£0.95 (£1.14 inc VAT)

OEM: 21-0543, S543

Triumph Gearbox Oil Level Drain Plug Bolt - 650/750cc - 1970 Onwards Triumph later T120, TR6 and T140, TR7 Unit Twins from 1970 onwards + Trident models...

Quantity:

+ −

CODE: stud3769-B14

Triumph Gearbox Top Mounting Stud - Pre Unit 500/650cc Models Circa 1956-62

£2.95 (£3.54 inc VAT)

OEM: 82-3769, F3769

Triumph Gearbox Top Mounting Stud - Pre Unit 500/650cc Models Circa 1956-62 Threaded mounting stud, correct fitment on T100, 6T, T110, T120, TR6 models....

Quantity:

+ −

CODE: cambush0686-B8

BSA Camshaft / Idler Pinion Bush - A7 and A10 Models From 1947 Onwards

£29.95 (£35.94 inc VAT)

OEM: 67-0686, 67-686

BSA Camshaft / Idler Pinion Bush - A7 and A10 Models From 1947 Onwards As used on both the camshaft driveside and gearside (2 required) + inner idler...

Quantity:

+ −

CODE: screwkit-952M-B9

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit 5T and 6T Models From 1956-62

£37.95 (£45.54 inc VAT)

OEM: E3439, E3437, E3444, E3442, E3438, 70-3439, 70-3437, 70-3444, 70-3442, 70-3438

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit 5T and 6T Models From 1956-62 Complete set of engine/gearbox screws suitable for later 5T...

Quantity:

+ −

CODE: bolt6220-B14

5/16" UNC - 1+3/4" Hexagonal Bolt - Part Threaded - 14-6220

£1.25 (£1.50 inc VAT)

OEM: 14-6220

5/16" UNC - 1+3/4" Hexagonal Bolt - Part Threaded - 14-6220 As used on various Triumph models - crankcase clamping bolt on unit twins and triples circa...

Quantity:

+ −

CODE: dowel1535-B13

Triumph Crankcase to Timing Cover Dowel - Pre Unit 500/650cc Models Circa 1939-62

£2.45 (£2.94 inc VAT)

OEM: 70-1535, E1535

Triumph Crankcase to Timing Cover Dowel - Pre Unit 500/650cc Models Circa 1939-62 Hollow crankcase to timing cover dowel - used to position and secure...

Quantity:

+ −

CODE: bigend6488

Triumph T20 Connecting Rod Big End Bush - SH and SM Tiger Cub Models - Circa 1964-68

£9.95 (£11.94 inc VAT)

OEM: 70-6488, E6488

Triumph T20 Connecting Rod Big End Bush - SH and SM Tiger Cub Models - Circa 1964-68 Correct fitment on later Tiger Cub models from engine number 99720....

Quantity:

+ −

CODE: plate8762-B13

Triumph Timing Cover Aperture / Patent Plate - T150 and T160 Trident Models

£4.95 (£5.94 inc VAT)

OEM: 70-8762, E8762

Triumph Timing Cover Aperture / Patent Plate - T150 and T160 Trident Models Alloy timing cover triangular name plate for all 750cc triples from 1968...

Quantity:

+ −

CODE: shim2660-B13

Triumph Crankshaft / Engine Sprocket Shim - Later 500/650cc Twins, 750cc Twins + 750cc Triples

£0.75 (£0.90 inc VAT)

OEM: 71-2660, E12660

Triumph Crankshaft / Engine Sprocket Shim - Later 500/650cc Twins, 750cc Twins + 750cc Triples Engine sprocket alignment shim / distance piece - locates...

Quantity:

+ −

CODE: bigend5802

Triumph Big End Bearing / Crankpin - T20 Tiger Cub Models Circa 1964-68

£49.95 (£59.94 inc VAT)

OEM: 70-5802, E5802

Triumph Big End Bearing / Crankpin - T20 Tiger Cub Models Circa 1964-68 Correct fitment on later T20 models - from engine number 99720. Complete...

Quantity:

+ −

CODE: plate4016B-B13

Triumph Brass Timing Cover Patent Plate - Pre Unit and Unit Twins - Circa 1959-85

£3.95 (£4.74 inc VAT)

OEM: 70-4016, E4016

Triumph Brass Timing Cover Patent Plate - Pre Unit and Unit Twins - Circa 1959-85 Brass and black timing cover triangular name plate for all pre unit and...

Quantity:

+ −

CODE: seal356-B7

Oil Seal Set - Engine and Gearbox - Norton Dominator, Atlas, 1949-1968

£11.95 (£14.34 inc VAT)

Oil Seal Set - Engine and Gearbox To suit Norton Dominator, Atlas, 500cc, 600cc, 650cc, 750cc 1949-1968

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

Account Details

Quick Links

Feked.com

Feked Online