.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

oring727H
£0.95 (£1.14 inc VAT)
OEM: 60-3548, 70-3253, E3253
Rocker spindle O Ring for Triumph 200, 350, 500, 650 and 750cc models This o-ring is the little sucker that you replace to stop that oil leak from the...

nut1302-B14
£0.95 (£1.14 inc VAT)
OEM: 14-1302, 21-1852, S1852
5/16" UNF Self-Locking Cleveloc Nut - Thin Type 5/16" UNF self-locking Cleveloc nut. Thin Type - 24TPI OEM: 14-1302, 21-1852, S1852
+

filt028-B2
£4.95 (£5.94 inc VAT)
OEM: 06-3371
Norton Commando Oil Filter 750 and 850 Spin on cartridge type. Screw on filter Fits Commando 750 and 850. Can be used with Oil Filter Mounting block 06-3139...

washer1335
£0.95 (£1.14 inc VAT)
OEM: 70-1335, E1335, 40-0159, 40-159
Triumph Copper Washer - Overhead Rocker Spindle / Timing Cover Plug Also used for the T140 oil in frame sump washer. OEM: 70-1335, E1335,  40-0159,...
+

nut1303-B14
£1.45 (£1.74 inc VAT)
OEM: 14-1303, 06-3024
3/8" UNF Self-Locking Cleveloc Nut - Thin Type 3/8" UNF self-locking Cleveloc nut. Thin Type - 24TPI OEM: 14-1303, 06-3024
+

screw4255-B13
£1.45 (£1.74 inc VAT)
OEM: 60-4255, D208-5, D4255
Triumph Patent Plate Hammer Drive Screw/Rivet Set Set of three correct hammer drive screws to secure the timing cover triangular name plate on all 500,...
+

nut036-B14
£0.75 (£0.90 inc VAT)
OEM: P0172A, S1-52, 21-7052, PO172A, PO-172A, 02-0046
Triumph Twin - Cylinder Base Nut - P0172A Also to secure top head stay to engine. 3/8" CEI OEM: P0172A, S1-52, PO172A, PO-172A, 02-0046
+

wash1257
£0.45 (£0.54 inc VAT)
OEM: 57-1257, T1257, 40-3089
Triumph/BSA Gearbox Oil Level Drain Plug Washer - 350/500/650/750cc Models From 1960 Onwards Gearbox level plug fibre washer - correct fitment on various...
+

wash2330
£0.25 (£0.30 inc VAT)
OEM: 60-2330, 60-4247, 54-0055, D4247, D2330
5/16" Plain Washer - Thin Type  - 1/16" Thickness ID: 1/2" (12.8mm) OD: 5/8" (15.7mm) Thickness: 1/16", 0.05" (1.2mm) OEM: 60-2330, 60-4247, 54-0055,...
+

screw205-B18
£0.95 (£1.14 inc VAT)
OEM: 82-4129, F4129
Contersunk Screw - Rotor Cover or Tank Badge - 82-4129 To screw the rotor cover on the primary chaincase. Can also be used for Tank Badges, but my need to be...
+

seal361-B7
£11.95 (£14.34 inc VAT)
OEM: E4568, 70-4568, E4578, 70-4578, E3876, 70-3876, E7565, 70-7565, T1956, 57-1956, T946, 57-0946
Oil Seal Set - Engine and Gearbox To suit Triumph T120, TR6, 650cc 1963-1971 Contains: Contact point seals, Clutch back plate seals (for both early and late...
+

wash1738
£0.45 (£0.54 inc VAT)
OEM: 57-1738, T1738, 02-0100, GS761
Triumph Primary Adjuster Drain Plug Fibre Washer - 350/500/650cc Models Circa 1961-74 Drain and adjuster plug fibre washer - correct fitment on 3TA, 5TA,...
+

bolt7354-B13
£0.75 (£0.90 inc VAT)
OEM: 70-7354, E7354
BSA/Triumph Timing Points Cover Countersunk Screw - Various Models Posi-drive screw to fix the points cover on various unit models. 2BA x 1/2" UH Made...
+

sw085-UK-B18
£9.95 (£11.94 inc VAT)
OEM: PS5320/6, 60-2133, D2133, 19-6504, 5300/1/07
Triumph/BSA Oil Pressure Switch - Smiths Type With Taper Thread As fitted to unit A50, A65, T120, TR6, T90, T100 models circa 1969-73. Also used on some...
+

wash5315-B13
£2.45 (£2.94 inc VAT)
OEM: 70-5315
Oil Sump Filter Gauze Copper Washer - Triumph 650cc + 750cc Unit Twins Copper washer to fit Oil Filter Gauze 650 and 750cc Triumph Models - T120, TR6,...
+

wash3887
£0.45 (£0.54 inc VAT)
OEM: 70-3887, E3887
Triumph Oil Pump Mounting Serrated Washer - Conical Type - 350/500/650/750cc Unit Twins Correct for all unit twins - 3TA, 5TA, T90, T100, 6T, TR6, T120,...
+

sw086-PREM-B18
£9.95 (£11.94 inc VAT)
OEM: 60-3719, D3719, 19-6508, PS5330/1/03
Triumph Oil Pressure Switch Triumph - Veglia Type With Straight / Parallel Threads As fitted to later T100 + T140, TR7, TSS, TSX, T150 and T160 models...
 

washer1880
£0.85 (£1.02 inc VAT)
OEM: 82-1880, F1880
Triumph Copper Sealing Washer - 82-1880 Used in various places on Triumph engines, including the sump bolt washer. OEM: 82-1880, F1880
+

filt063-TRI-B2
£6.95 (£8.34 inc VAT)
OEM: 19-4589, 99-1179, 19-4590
Oil Filter Element - Triumph T140, TR7 - Oil in Frame Replacement paper oil filter element. For the modified lower filter replacement on the frame sump....

nut1310-B14
£1.75 (£2.10 inc VAT)
OEM: 70-1310, E1310, 82-1008, F1008
Triumph Nut - 5/16" x 26TPI - Oil Block to Crankcase Unit Twins + Other Uses 5/16" x 26TPI  small hexagon thin wall nut. OEM: 70-1310, E1310,  82-1008,...
+

wash7971
£0.75 (£0.90 inc VAT)
OEM: 29-7971, 82-9070, F9070
BSA/Triumph Oil Tank Filter Fibre Washer - A, B and C Group + Unit Singles Fibre washer locates between the oil tank filter and oil feed pipe/banjo....
+

seal360-B7
£11.95 (£14.34 inc VAT)
OEM: E4568, 70-4568, E3833, 70-3833, E3876, 70-3876, H1478, 57-1478, H2239, 57-2239, E7565, 70-7565
Oil Seal Set - Engine and Gearbox To suit Triumph 3TA, T21, T90, 5TA, T100, TR5T, 350cc, 500cc 1963-1974 Contains: Contact point (camshaft) seal, Crank...
+

plate4016S-B13
£3.95 (£4.74 inc VAT)
OEM: 70-4016
Triumph Patent Plate - Name Plate - 70-4016 Timing cover triangular name plate for all 500, 650, 750cc Triumph Twins. OEM: 70-4016, E4016
+

woodruff0082-B18
£1.75 (£2.10 inc VAT)
OEM: 71-0082, E3974, E10082
Triumph Alternator Rotor Woodruff Key - 5/32" x 5/32" x 3/4" Suitable for all Pre-Unit and Unit Triumph Twins fitted with an Alternator OEM: 71-0082,...
+

key1580-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1580, E1580, 35-1896, 41-0560, 41-560, 15-0040
Triumph / BSA Crankshaft Timing Pinion Woodruff Key - Pre-Unit & Unit Models Locates the crankshaft pinion on the timing side to the crankshaft. Used...
+

wash1670
£0.45 (£0.54 inc VAT)
OEM: 70-1670, E1670, 06-7542, 67-1499
Triumph/BSA/Norton Oil Pressure Release Valve Fibre Washer - All Valve Types Locates between the valve body and the timing cover / crankcase. Suitable for...
+

screw3821-B13
£0.45 (£0.54 inc VAT)
OEM: 70-3821, E3821, 40-0246
2BA - 5/16" Countersunk Screw - Triumph/BSA Sprocket Cover Plate - Unit Twins and Singles Oil seal housing countersunk screw as used on 3TA, 5TA, T100,...
+

wash2441
£0.95 (£1.14 inc VAT)
OEM: 70-2441, 60-7132, E2441, D7132
1/4" (6.35mm) Annealed Copper Washer - Various Applications ID: 1/4" (6.35mm) OD: 7/16" (11mm) OEM: 70-2441, 60-7132, E2441, D7132
+

bear348-F4
£31.95 (£38.34 inc VAT)
OEM: 70-2879, 68-0625
Triumph 650cc/750cc Unit Twins (T120/TR6/6T/T140/TR7/TR7T Trail) Crankshaft Drive side bearing, 500cc/650cc Pre Unit Twins Crankshaft D/S roller bearing...

filt407-B7
£49.95 (£59.94 inc VAT)
OEM: 19-4589, 99-1179
Triumph Sump Plate / Oil Filter Kit - 650/750cc Oil in Frame Models Complete kit containing: Billet alloy sump plate Oil filter base plate Oil...
+

wash8754
£0.65 (£0.78 inc VAT)
OEM: 70-8754, E8754, GS254, 70-9738, E9738, NMT2057, NMT2058, 06-7541
Triumph/BSA/Norton Oil Pressure Release Valve Body Fibre Washer - All Valve Types Locates between the valve body, piston, spring and cap. Suitable for all...
+

rocker-006W-B4
£6.95 (£8.34 inc VAT)
OEM: 70-1564, E1564, 40-0968
Triumph Pre Unit Rocker Box Inspection Cap and Crankcase Filter / Sump Plug on Unit 350/500cc Models Rocker cover inspection cap on 500/650cc pre unit...
 

engine4152-B18
£1.95 (£2.34 inc VAT)
OEM: 70-4152, E4152
Triumph Primary Chain Tensioner Blade Rod - 70-4152 To adjust the tension of the primary chain, on some Triumph models OEM: 70-4152, E4152
+

bigend210-B3
£18.95 (£22.74 inc VAT)
OEM: 70-3586, B2026M, E3586
Triumph Big End Bearing Shells Pre Unit and Unit 650cc Models + T140 and TR7 - STD Triumph T120/TR6 (1956-75), T140/TR7 (1973-) Big End Shell Set. Also...
+

seal355-B7
£9.95 (£11.94 inc VAT)
OEM: 40-25, 40-0025, 41-3054, 40-977, 40-0977, 40-679, 40-0679, 57-2641, 40-243, 40-0243, 40-3281, 70-4568, E4568
Oil Seal Set - Engine and Gearbox To suit BSA B25, C25, B44 1967-1972, B50 1971-1972 Contains: Contact point (camshaft) seals, Clutch back plate seal,...
+

gkt1529
£0.75 (£0.90 inc VAT)
OEM: 70-1529, E1529
Triumph Oil Feed Block Gasket - Pre Unit Models Triumph pre-unit twins - 350, 500, 650cc OEM: 70-1529, E1529
+

nut115H-B14
£1.95 (£2.34 inc VAT)
OEM: 21-0692
Triumph Cylinder Base Nut for T120, T140 models (1969-). 12 point multi sided. 3/8" UNF. Also fits some BSA A65 models. OEM: 21-0692
+

wash8343
£0.75 (£0.90 inc VAT)
OEM: 42-8343
Fibre Washer - 1+1/4" - BSA Oil Tank Filter Washer + Universal Uses Correct part for BSA A & B Models, C10L, C12 - oil tank filter washer OD: 1+1/4"...
+

dowel8751-B13
£1.95 (£2.34 inc VAT)
OEM: 70-8751, 70-1534, E8751, E1534
Triumph Cylinder Base / Crankcase Halves Hollow Dowel - Pre Unit and Unit Twins and Triples Stud to crankcase hollow dowel as used on various models...
+

sump-bolt-washer-set-B3
£3.45 (£4.14 inc VAT)
OEM: 31-222, 31-0222
BSA Alloy Sump Plate Securing Bolts - Non Standard To replace existing studs in crankcase, to allow fitment of the thicker cast-alloy or billet-alloy sump...
+

pipe1149-B3
£3.45 (£4.14 inc VAT)
OEM: 71-1149, E1149
Triumph Front Crankcase Breather Hose/Pipe - 500/650/750cc Twins - 1969-78 Attaches to the breather stub on your crankcase (primary side) Silver...
+

nut3955-B14
£0.65 (£0.78 inc VAT)
OEM: 82-3955, F3955
3/8" CEI Self-Locking Nyloc Nut 3/8" CEI self-locking nyloc nut. deep type - 26TPI OEM: 82-3955, F3955
+

disc2256-B13
£2.95 (£3.54 inc VAT)
OEM: 70-2256, 68-0132, E2256, 68-132
Triumph/BSA Crankcase Rotary Breather Disc Spring - Various Models Correct fitment for many  Triumph 350, 500 & 650 Unit & Pre-Unit models. Also...
+

filt058-h-B3
£13.95 (£16.74 inc VAT)
OEM: 71-1126, E11126
BSA Oil Sump Plate Filter Gauze -  A7, A10, A50 and A65 Models Usually two gaskets required, one each side of the filter - see related products....
 

seal1923-B13
£1.95 (£2.34 inc VAT)
OEM: 66-1923
BSA Timing Cover Oil Feed Rubber Washer - Pre Unit B and M Group Camshaft oil seal in timing cover. As fitted to BSA B31, B32, B33, B34 and M20, M21, M33...
+

filt027-B2
£6.95 (£8.34 inc VAT)
OEM: 70-6571
BSA A75 & Triumph T150, T160 (1965 on) Oil Filter Element Replacement oil filter element. OEM: 70-6571 Avaiable as standard or UK made - please...

o/sw2930-B13
£3.95 (£4.74 inc VAT)
OEM: 71-2930, E12930
Triumph Oil Pressure Switch Rubber Boot - Veglia Type Later type as with the Veglia type oil pressure switch. Can also be used instead of the plain type...
+

seal358-B7
£11.95 (£14.34 inc VAT)
OEM: E4568, 70-4568, E3833, 70-3833, T1956, 57-1956, T946, 57-0946
Oil Seal Set - Engine and Gearbox To suit Triumph T120, T140, TR7 5 Speed, 1972-1983 Contains: Contact point (camshaft) seals, Crank timing side seal,...
+

gk3754
£0.95 (£1.14 inc VAT)
OEM: 70-3763, E3763, 71-1458, 71-3754
Triumph Oil Junction Block Gasket - 500/650/750cc Unit Twins - 4 Hole 3 hole version also available - see related products. OEM: 70-3763, E3763,...
+

nut-DS47-B14
£1.75 (£2.10 inc VAT)
OEM: DS47, DS-47
7/16" x 26 CEI Half Nut - Various Uses on Pre Unit Triumph Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...
+

oilseal294
£2.95 (£3.54 inc VAT)
OEM: 67-0674
BSA A50/A65 (1962-73) and A7/A10 (1954-63) Crankshaft Drive Side oil seal. OEM: 67-0674
+

filt0529-B3
£17.95 (£21.54 inc VAT)
OEM: 70-0529, E529
Triumph Pre Unit Crankcase Sump Oil Filter Gauze - All Models to 1962 Correct fitment for all pre unit twins 350/500/650cc - 3T, T100,  5T, 6T, T110,...
+

filt985-B3
£14.95 (£17.94 inc VAT)
OEM: 06-3139
Oil Filter Mounting Block/Head - Norton Commando Models + Universal Fit Correct for Norton 750/850cc Commando Models, can also be used of universal...

seal354-B7
£11.95 (£14.34 inc VAT)
OEM: 57-0946, 68-0027, 68-27, T946, 57-0946, 11268-0026, 11468-0235, 11967-0674, 68-235, 68-0235
Oil Seal Set - Engine and Gearbox To suit BSA A50, A65, 1962-1973 Contains: Contact point (camshaft) seal, Crank seal, Clutch seal, Gearbox seal, Chain case...
+

wash7518
£0.15 (£0.18 inc VAT)
OEM: 66-7518
1/4" Fibre Washer - BSA Primary Chaincase / Crankcase Drain Plug + Universal Use Locates on the chaincase drain plug bolt on later A7 and A10 models from...
+

seal248
£2.25 (£2.70 inc VAT)
OEM: 60-3500, 70-3833, E3833
CLUTCH OIL SEAL - Triumph - for the clutch back plate Clutch back plate Oil seal for Triumph 3TA/5TA/T90/T100 350/500cc (1957-67), High gear inner and...
+

c/s-tube3903-B13
£9.95 (£11.94 inc VAT)
OEM: 70-3903, E3903, 68-0185, 68-185
Triumph/BSA Crankshaft Sludge / Oil Tube - 500/650/750cc Twins Circa 1959-82 Crankshaft oil tube, sludge trap - correct fitment on pre unit T100, 6T,...
+

valv048-B18
£4.95 (£5.94 inc VAT)
OEM: 60-2045
Triumph Oil Pressure Sensor Rubber boot. Fits 500,650,750cc models from 1969 onwards. This rubber is a reproduction of the Original and is used to cover the...
+

filt217B-B3
£34.95 (£41.94 inc VAT)
OEM: 70-0486
Triumph Billet Sump Plate with Magnetic Hole - Pre Unit Twins Circa 1945-62 CNC Manufactured from solid billet alloy. Alloy plate with drain plug - quick...
+

washer4262
£0.45 (£0.54 inc VAT)
OEM: 60-4262, PT104B, D4262
Triumph/AMC Fibre Sealing Washer - 60-4262 Used in various places on Triumph, AJS and Matchless bikes, including the oil tank washer. OEM: 60-4262,...
+

pump-gkt-preunit-03
£1.00 (£1.20 inc VAT)
OEM: E1537, 70-1537
Triumph Pre-Unit Oil Pump Gasket 70-1537 500cc, 650cc etc OEM E1537, 70-1537
+

pump-gkt-unit-02
£1.00 (£1.20 inc VAT)
OEM: E11461, 71-1461
Triumph Unit Oil Pump Gasket 500cc, 650cc, 750cc etc OEM E11461, 71-1461
+

nut057H-B18
£2.75 (£3.30 inc VAT)
OEM: 21-0544, S544
Triumph T120, T140 Primary Chaincase Dome Head Nut - 21-0544 UNF Dome Head Nut 5/16" (Chrome plated) OEM: 21-0544, S544
+

wash1612
£0.15 (£0.18 inc VAT)
OEM: 70-1612, E1612, 70-2312, E2312
Triumph 1/4" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit Models Shakeproof serrated washer as used to secure bolts - engine,...
+

nut-DS48-B14
£1.95 (£2.34 inc VAT)
OEM: DS48, DS-48, 02-0052, 99-3557, 15-5753
1/2" x 20 CEI Standard Nut - Various Uses on BSA, Triumph and AMC Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...
+

filt3179H-ZP-B3
£23.95 (£28.74 inc VAT)
OEM: 82-3179, F3179, 40-8328
Triumph/BSA Oil Tank Filter - Triumph Pre Unit and Unit Twins + BSA C15, B40, B44 - Zinc Plated Spigot type oil tank filter with zinc plated steel body...
+

key1558-B13
£2.45 (£2.94 inc VAT)
OEM: 70-1558, E1558
Triumph Camshaft Pinion Woodruff Key - Pre-Unit & Unit Twins Locates the camshaft pinion to the camshaft - both inlet and exhaust. Length: 5/16"...
+

seal7565
£1.95 (£2.34 inc VAT)
OEM: 70-7565, E7565
Triumph Clutch Back Plate Oil Seal - 500/650cc Unit Models from 1968 Onwards Gearbox sprocket cover plate oil seal. Correct fitment for T120 and TR6...
+

wash3723
£0.75 (£0.90 inc VAT)
OEM: 70-3723, E3723
Triumph Oil Sump Filter Cork Sealing Washer - Unit 350/500cc Models Cork sump filter sealing gasket as used 3TA, 5TA, T100 and TR5T models from 1959...
+

pipe1614-B2
£8.45 (£10.14 inc VAT)
OEM: 83-1614, F11614
Triumph 'D' Type Crankcase Breather Hose/Pipe - Unit Twins - 1970-73 As fitted on T100/T120/TR6 Oil in frame models Silver coloured 'D' shaped pipe...
+

pump-mor-13
£89.95 (£107.94 inc VAT)
OEM: 70-3072, E3072, GS326
Triumph Plunger Type Oil Pump - Pre Unit Models Circa 1949-62 - Made in England by Morgo A high performance dual plunger oil pump for pre unit 3T, 5T,...
+

seal6299
£0.65 (£0.78 inc VAT)
OEM: 70-6299, E6299, 40-0418, 57-3620, 70-7431, E7431
Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards O ring seal for the adjuster plug as used on all unit twins from...
+

domenut1531-B13
£2.95 (£3.54 inc VAT)
OEM: 97-1531, H1531
Triumph Primary and Gearbox Cover Dome Nut - Unit 650cc Models Circa 1963-68 Chrome plated acorn nut used to secure both the primary chaincase cover and...
+

shim0671-B18
£6.95 (£8.34 inc VAT)
OEM: 67-0671, 67-671, 67-672, 67-677, 67-0672, 67-0677
BSA Crankshaft Shim Set - A10, A7 ID: 1+1/4" (31.5mm) OD: 1+11/16" (42.2mm) 2x 0.001" 2x 0.005" 1x 0.010" Made in England OEM: 67-0671, 67-671, 67-672,...
+

pillarbolt7680-B13
£1.95 (£2.34 inc VAT)
OEM: 70-7680, E7680
Triumph/BSA Contact Breaker Pillar Bolt - Various Models To secure the contact points set on side points models, also secures the points cover. Correct...
+

bigend211-B3
£18.95 (£22.74 inc VAT)
OEM: 70-3586, B2026M, E3586
Triumph Big End Bearing Shells Pre Unit and Unit 650cc Models + T140 and TR7 - 010 Triumph T120/TR6 (1956-75), T140/TR7 (1973-) Big End Shell Set. Also...
+

shim0066-B18
£6.95 (£8.34 inc VAT)
OEM: 40-0065, 40-0066, 40-0069, 40-66, 40-69
BSA Crankshaft Shim Set - Unit Singles - C15, B25, B40, B44, B50 Also used to shim between the alternator and crankshaft on A50 and A65 models. Set of 5...
+

wash0644-B18
£1.25 (£1.50 inc VAT)
OEM: 67-0644, 67-644
BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards Half time pinion lockwasher as used on all A50 and A65 models from...
+

seal359-B7
£7.95 (£9.54 inc VAT)
OEM: 70-4568, 70-3379, 97-1168, E4568, E3379, H1168
Oil Seal Set - Engine and Gearbox - Triumph T20 Tiger Cub Models - 1963 Onwards Suitable for T20 Tiger Cub models circa 1963-1967. Kit contains: side...
+

pmp223
£239.95 (£287.94 inc VAT)
OEM: 65-2589, 65-2619
BSA Oil Pump Assembly - Pre Unit Singles - B, C and M Group Models Circa 1940-62 Complete oil pump suitable for B31, B32, B33, B34, M20, M21 C10L,...
+

fkpipe035
£0.95 (£1.14 inc VAT)
Breather / Overflow Hose - 3.5mm Bore, 6mm Diameter - Black Rubber Carburettor overflow or breather pipe - s uitable for low pressure uses only. OD: 6mm...
+

valv570ss-B18
£39.95 (£47.94 inc VAT)
OEM: 71-3447, E5896, 70-5896
Oil Pressure Release Valve Fits Triumph T140 Bonneville motorcycle Can be used in some other models also Stainless Steel (Made in UK) OEM: 71-3447, E5896,...
+

pmp202H-B18
£69.95 (£83.94 inc VAT)
OEM: 70-9421, 70-3878, 70-6928, E9421, E3878, E6928
Triumph Unit Oil Pump - UK Made Dual plunger Triumph engine oil pump for 350cc, 500cc, 650cc and 750cc unit twins including: 3TA, 5TA, T90, T100, TR6,...
+

bolt1872-B13
£2.95 (£3.54 inc VAT)
OEM: 21-1872, S1872
Triumph Timing Plug / Sump Plate Drain Bolt - Unit Singles and Twins from 1968 Onwards Timing aperture plug - correct fitment on various models...
+

wash0588
£0.45 (£0.54 inc VAT)
OEM: 68-0588, 71-4443, E14443
BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72 Rubber O ring seal for oil lines on A50 and A65 models from 1965-72. Also used between the...
+

filt840m-B3
£10.95 (£13.14 inc VAT)
OEM: 70-3722, E3722
Oil Sump Filter Gauze - Triumph 350cc + 500cc Unit Twins Conical type, fits 350/500 unit construction models OEM: 70-3722, E3722
+

bear019-F4
£23.95 (£28.74 inc VAT)
OEM: 24-0724, 70-9974, 27-724, 24-724
Crankshaft Bearing BSA C15/B40 T/S - 1967 onwards. C25/B25/B44 T/S and D/S - Roller Type - 1967 onwards. B31/B33/B34 D/S (1946-59), B50 T/S & D/S -...
+

pump-gkt-3910
£0.75 (£0.90 inc VAT)
OEM: 71-3910, E13910
Triumph Oil Pump Gasket - Unit Twins - 350/500/650/750cc From 1963-83 Suitable for models with 4 valve oil pump. Can also be used on 2 valve oil pumps as...
+

stud3114-B19
£2.95 (£3.54 inc VAT)
OEM: 70-3114, E3114
Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73 Drive side crankshaft to alternator rotor stud - later pre unit...
+

plug1112-B18
£4.95 (£5.94 inc VAT)
OEM: 57-1112, T1112
Triumph Gearbox Oil Drain and Level Plug - Unit 350/500/650cc Models Circa 1959-68 Correct fitment on 3TA, 5TA, T90, T100 models circa 1959-74 + 6T, T120...
+

filt582-SS-B3
£23.95 (£28.74 inc VAT)
OEM: 42-8334, 42-8426
BSA Oil Tank Filter - Pre Unit A, B and C Group Models - Circa 1954-63 Oil tank filter and drain plug. Correct fitment for BSA A7, A10, B31 and B33...
 

nut262-B18
£4.95 (£5.94 inc VAT)
OEM: 70-3905, E3905
Triumph T120/T110 650cc etc (-1968) Hexagonal crank Sludge Trap plug, CEI threads. OEM: 70-3905, E3905
+

spring3724-B13
£1.75 (£2.10 inc VAT)
OEM: 70-3724, E3724
Triumph Oil Sump Filter Retaining Spring - 350/500cc Models OD: 7/16" (10.6mm) Length uncompressed: 7/16" (10.8mm) OEM: 70-3724, E3724
+

screw4255-brass-B13
£1.45 (£1.74 inc VAT)
OEM: 60-4255, D208-5, D4255
Triumph Brass Patent Plate Hammer Drive Rivet / Screw Set Set of three brass hammer drive rivets to secure the timing cover triangular name plate as used...
+

seal087
£1.25 (£1.50 inc VAT)
OEM: 71-1070
O RING - BSA and Triumph BSA, Triumph Rocket 3, Trident (cap seal) OEM: 71-1070
+

bolt742-B14
£23.95 (£28.74 inc VAT)
Triumph High Tensile 9 piece Cylinder Head Bolt Set for TR6/T120 Unit models. Suit most later Triumgh twin 650cc 1x 70-4771 Centre head bolt - 5/16" x 3" x...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.