Engine & Transmission :: Engine Lower

CODE: filt985-B3

Oil Filter Mounting Block/Head - Norton Commando Models + Universal Fit

£14.95 (£17.94 inc VAT)

OEM: 06-3139

Oil Filter Mounting Block/Head - Norton Commando Models + Universal Fit Correct for Norton 750/850cc Commando Models, can also be used of universal...

Select Options

DS47, DS-47 - 7/16" x 26 CEI Half Nut - Various Uses on Pre Unit Triumph Models

CODE: nut-DS47-B14

7/16" x 26 CEI Half Nut - Various Uses on Pre Unit and Unit Triumph Models

£1.75 (£2.10 inc VAT)

OEM: DS47, DS-47

7/16" x 26 CEI Half Nut - Various Uses on Pre Unit Triumph Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...

Quantity:

+ −

CODE: seal354-B7

Oil Seal Set - Engine and Gearbox - BSA A50, A65, 1962-1973

£11.95 (£14.34 inc VAT)

OEM: 57-0946, 68-0027, 68-27, T946, 57-0946, 11268-0026, 11468-0235, 11967-0674, 68-235, 68-0235

Oil Seal Set - Engine and Gearbox To suit BSA A50, A65, 1962-1973 Contains: Contact point (camshaft) seal, Crank seal, Clutch seal, Gearbox seal, Chain case...

Quantity:

+ −

CODE: oilseal294

BSA A7, A10, A50, A65 Crankshaft Oil Seal - 67-0674

£2.95 (£3.54 inc VAT)

OEM: 67-0674

BSA A50/A65 (1962-73) and A7/A10 (1954-63) Crankshaft Drive Side oil seal. OEM: 67-0674

Quantity:

+ −

CODE: gk3754

Triumph Oil Junction Block Gasket - 500/650/750cc Unit Twins - 4 Hole

£0.95 (£1.14 inc VAT)

OEM: 70-3763, E3763, 71-1458, 71-3754

Triumph Oil Junction Block Gasket - 500/650/750cc Unit Twins - 4 Hole 3 hole version also available - see related products. OEM: 70-3763, E3763,...

Quantity:

+ −

70-0529, E529 - Triumph Pre Unit Crankcase Sump Oil Filter Gauze

CODE: filt0529-B3

Triumph Pre Unit Crankcase Sump Oil Filter Gauze - All Models to 1962

£17.95 (£21.54 inc VAT)

OEM: 70-0529, E529

Triumph Pre Unit Crankcase Sump Oil Filter Gauze - All Models to 1962 Correct fitment for all pre unit twins 350/500/650cc - 3T, T100, 5T, 6T, T110,...

Quantity:

+ −

CODE: wash7518

1/4" Fibre Washer - BSA Primary Chaincase / Crankcase Drain Plug + Universal Use

£0.15 (£0.18 inc VAT)

OEM: 66-7518

1/4" Fibre Washer - BSA Primary Chaincase / Crankcase Drain Plug + Universal Use Locates on the chaincase drain plug bolt on later A7 and A10 models from...

Quantity:

+ −

CODE: valv571-B18

Oil Pressure Release Valve Triumph T110, T120

£59.95 (£71.94 inc VAT)

OEM: 70-4191, 70-2795, E4191, E2795

Oil Pressure Release Valve (With Tell Tale) Stainless Steel Body. Fits Triumph T110 and Triumph T120. (UK Made) Will fit most Triumph Pre-Unit 350, 500 &...

Quantity:

+ −

CODE: seal248

Triumph Oil Seal - Clutch back plate

£2.25 (£2.70 inc VAT)

OEM: 60-3500, 70-3833, E3833

CLUTCH OIL SEAL - Triumph - for the clutch back plate Clutch back plate Oil seal for Triumph 3TA/5TA/T90/T100 350/500cc (1957-67), High gear inner and...

Quantity:

+ −

CODE: c/s-tube3903-B13

Triumph/BSA Crankshaft Sludge / Oil Tube - 500/650/750cc Twins Circa 1959-82

£9.95 (£11.94 inc VAT)

OEM: 70-3903, E3903, 68-0185, 68-185

Triumph/BSA Crankshaft Sludge / Oil Tube - 500/650/750cc Twins Circa 1959-82 Crankshaft oil tube, sludge trap - correct fitment on pre unit T100, 6T,...

Quantity:

+ −

CODE: valv048-B18

Oil Pressure Sensor Rubber - Triumph - OEM: 60-2045

£4.95 (£5.94 inc VAT)

OEM: 60-2045

Triumph Oil Pressure Sensor Rubber boot. Fits 500,650,750cc models from 1969 onwards. This rubber is a reproduction of the Original and is used to cover the...

Quantity:

+ −

CODE: filt217B-B3

Triumph Billet Sump Plate with Magnetic Hole - Pre Unit Twins Circa 1945-62

£34.95 (£41.94 inc VAT)

OEM: 70-0486

Triumph Billet Sump Plate with Magnetic Hole - Pre Unit Twins Circa 1945-62 CNC Manufactured from solid billet alloy. Alloy plate with drain plug - quick...

Quantity:

+ −

CODE: washer4262

Triumph/AMC Fibre Sealing Washer - 60-4262

£0.45 (£0.54 inc VAT)

OEM: 60-4262, PT104B, D4262

Triumph/AMC Fibre Sealing Washer - 60-4262 Used in various places on Triumph, AJS and Matchless bikes, including the oil tank washer. OEM: 60-4262,...

Quantity:

+ −

CODE: pump-gkt-preunit-03

Triumph Pre-Unit Oil Pump Gasket 70-1537

£1.00 (£1.20 inc VAT)

OEM: E1537, 70-1537

Triumph Pre-Unit Oil Pump Gasket 70-1537 500cc, 650cc etc OEM E1537, 70-1537

Quantity:

+ −

CODE: nut057H-B18

Triumph T120, T140 Primary Chaincase Dome Head Nut - 21-0544

£2.75 (£3.30 inc VAT)

OEM: 21-0544, S544

Triumph T120, T140 Primary Chaincase Dome Head Nut - 21-0544 UNF Dome Head Nut 5/16" (Chrome plated) OEM: 21-0544, S544

Quantity:

+ −

CODE: wash1612

Triumph 1/4" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit Models

£0.15 (£0.18 inc VAT)

OEM: 70-1612, E1612, 70-2312, E2312

Triumph 1/4" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit Models Shakeproof serrated washer as used to secure bolts - engine,...

Quantity:

+ −

CODE: pump-gkt-unit-02

Triumph Unit Oil Pump Gasket

£1.00 (£1.20 inc VAT)

OEM: E11461, 71-1461

Triumph Unit Oil Pump Gasket 500cc, 650cc, 750cc etc OEM E11461, 71-1461

Quantity:

+ −

CODE: nut-DS48-B14

1/2" x 20 CEI Standard Nut - Various Uses on BSA, Triumph and AMC Models

£1.95 (£2.34 inc VAT)

OEM: DS48, DS-48, 02-0052, 99-3557, 15-5753

1/2" x 20 CEI Standard Nut - Various Uses on BSA, Triumph and AMC Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...

Quantity:

+ −

82-3179, 82-9430, F3179, F9430, 40-8328 - Triumph/BSA Oil Tank Filter - Triumph Pre Unit and Unit Twins + BSA C15, B40, B44 - Stainless Steel

CODE: filt3179H-ZP-B3

Triumph/BSA Oil Tank Filter - Triumph Pre Unit and Unit Twins + BSA C15, B40, B44 - Zinc Plated

£23.95 (£28.74 inc VAT)

OEM: 82-3179, F3179, 40-8328

Triumph/BSA Oil Tank Filter - Triumph Pre Unit and Unit Twins + BSA C15, B40, B44 - Zinc Plated Spigot type oil tank filter with zinc plated steel body...

Quantity:

+ −

CODE: key1558-B13

Triumph Camshaft Pinion Woodruff Key - Pre-Unit & Unit Twins

£2.45 (£2.94 inc VAT)

OEM: 70-1558, E1558

Triumph Camshaft Pinion Woodruff Key - Pre-Unit & Unit Twins Locates the camshaft pinion to the camshaft - both inlet and exhaust. Length: 5/16"...

Quantity:

+ −

CODE: seal7565

Triumph Clutch Back Plate Oil Seal - 500/650cc Unit Models from 1968 Onwards

£1.95 (£2.34 inc VAT)

OEM: 70-7565, E7565

Triumph Clutch Back Plate Oil Seal - 500/650cc Unit Models from 1968 Onwards Gearbox sprocket cover plate oil seal. Correct fitment for T120 and TR6...

Quantity:

+ −

CODE: wash3723

Triumph Oil Sump Filter Cork Sealing Washer - Unit 350/500cc Models

£0.75 (£0.90 inc VAT)

OEM: 70-3723, E3723

Triumph Oil Sump Filter Cork Sealing Washer - Unit 350/500cc Models Cork sump filter sealing gasket as used 3TA, 5TA, T100 and TR5T models from 1959...

Quantity:

+ −

CODE: pipe1614-B2

Triumph 'D' Type Crankcase Breather Hose/Pipe - Unit Twins - 1970-73

£8.45 (£10.14 inc VAT)

OEM: 83-1614, F11614

Triumph 'D' Type Crankcase Breather Hose/Pipe - Unit Twins - 1970-73 As fitted on T100/T120/TR6 Oil in frame models Silver coloured 'D' shaped pipe...

Quantity:

+ −

70-6299, E6299, 40-0418, 57-3620 - Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards

CODE: seal6299

Triumph Primary Chain Adjuster Plug Viton O Ring - Unit Twins From 1969 Onwards

£0.65 (£0.78 inc VAT)

OEM: 70-6299, E6299, 40-0418, 57-3620, 70-7431, E7431

Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards O ring seal for the adjuster plug as used on all unit twins from...

Quantity:

+ −

70-3072, E3072, GS326 - Triumph Plunger Type Oil Pump - Pre Unit Models Circa 1950-62 - Made in England by Morgo

CODE: pump-mor-13

Triumph Plunger Type Oil Pump - Pre Unit Models Circa 1949-62 - Made in England by Morgo

£89.95 (£107.94 inc VAT)

OEM: 70-3072, E3072, GS326

Triumph Plunger Type Oil Pump - Pre Unit Models Circa 1949-62 - Made in England by Morgo A high performance dual plunger oil pump for pre unit 3T, 5T,...

Quantity:

+ −

40-66, 40-0066, 40-0069 - BSA Crankshaft Shim Set - Unit Singles & Twins

CODE: shim0066-B18

BSA Crankshaft Shim Set - Unit Singles - C15, B25, B40, B44, B50

£6.95 (£8.34 inc VAT)

OEM: 40-0065, 40-0066, 40-0069, 40-66, 40-69

BSA Crankshaft Shim Set - Unit Singles - C15, B25, B40, B44, B50 Also used to shim between the alternator and crankshaft on A50 and A65 models. Set of 5...

Quantity:

+ −

CODE: domenut1531-B13

Triumph Primary and Gearbox Cover Dome Nut - Unit 350/500/650cc Models Circa 1963-68

£2.95 (£3.54 inc VAT)

OEM: 97-1531, H1531

Triumph Primary and Gearbox Cover Dome Nut - Unit 650cc Models Circa 1963-68 Chrome plated acorn nut used to secure both the primary chaincase cover and...

Quantity:

+ −

CODE: shim0671-B18

BSA Crankshaft Shim Set - A10, A7

£6.95 (£8.34 inc VAT)

OEM: 67-0671, 67-671, 67-672, 67-677, 67-0672, 67-0677

BSA Crankshaft Shim Set - A10, A7 ID: 1+1/4" (31.5mm) OD: 1+11/16" (42.2mm) 2x 0.001" 2x 0.005" 1x 0.010" Made in England OEM: 67-0671, 67-671, 67-672,...

Quantity:

+ −

70-7680, E7680 - Triumph/BSA Contact Breaker Pillar Bolt

CODE: pillarbolt7680-B13

Triumph/BSA Contact Breaker Pillar Bolt - Various Models

£1.95 (£2.34 inc VAT)

OEM: 70-7680, E7680

Triumph/BSA Contact Breaker Pillar Bolt - Various Models To secure the contact points set on side points models, also secures the points cover. Correct...

Quantity:

+ −

CODE: bigend211-B3

Triumph Big End Bearing Shells Pre Unit and Unit 650cc Models + T140 and TR7 - 010

£18.95 (£22.74 inc VAT)

OEM: 70-3586, B2026M, E3586

Triumph Big End Bearing Shells Pre Unit and Unit 650cc Models + T140 and TR7 - 010 Triumph T120/TR6 (1956-75), T140/TR7 (1973-) Big End Shell Set. Also...

Quantity:

+ −

CODE: wash0644-B18

BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards

£1.25 (£1.50 inc VAT)

OEM: 67-0644, 67-644

BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards Half time pinion lockwasher as used on all A50 and A65 models from...

Quantity:

+ −

CODE: seal359-B7

Oil Seal Set - Engine and Gearbox - Triumph T20 Tiger Cub Models - 1963 Onwards

£7.95 (£9.54 inc VAT)

OEM: 70-4568, 70-3379, 97-1168, E4568, E3379, H1168

Oil Seal Set - Engine and Gearbox - Triumph T20 Tiger Cub Models - 1963 Onwards Suitable for T20 Tiger Cub models circa 1963-1967. Kit contains: side...

Quantity:

+ −

CODE: pmp223

BSA Oil Pump Assembly - Pre Unit Singles - B, C and M Group Models Circa 1940-62

£239.95 (£287.94 inc VAT)

OEM: 65-2589, 65-2619

BSA Oil Pump Assembly - Pre Unit Singles - B, C and M Group Models Circa 1940-62 Complete oil pump suitable for B31, B32, B33, B34, M20, M21 C10L,...

Quantity:

+ −

CODE: pmp202H-B18

Triumph Unit Oil Pump - UK Made

£69.95 (£83.94 inc VAT)

OEM: 70-9421, 70-3878, 70-6928, E9421, E3878, E6928

Triumph Unit Oil Pump - UK Made Dual plunger Triumph engine oil pump for 350cc, 500cc, 650cc and 750cc unit twins including: 3TA, 5TA, T90, T100, TR6,...

Quantity:

+ −

CODE: fkpipe035

Breather / Overflow Hose - 3.5mm Bore, 6mm Diameter - Black Rubber

£0.95 (£1.14 inc VAT)

Breather / Overflow Hose - 3.5mm Bore, 6mm Diameter - Black Rubber Carburettor overflow or breather pipe - s uitable for low pressure uses only. OD: 6mm...

Quantity:

+ −

CODE: bolt1872-B13

Triumph Timing Plug / Sump Plate Drain Bolt - Unit Singles and Twins from 1968 Onwards

£2.95 (£3.54 inc VAT)

OEM: 21-1872, S1872

Triumph Timing Plug / Sump Plate Drain Bolt - Unit Singles and Twins from 1968 Onwards Timing aperture plug - correct fitment on various models...

Quantity:

+ −

CODE: plug1112-B18

Triumph Gearbox Oil Drain and Level Plug - Unit 350/500/650cc Models - Circa 1959-68

£4.95 (£5.94 inc VAT)

OEM: 57-1112, T1112

Triumph Gearbox Oil Drain and Level Plug - Unit 350/500/650cc Models Circa 1959-68 Correct fitment on 3TA, 5TA, T90, T100 models circa 1959-74 + 6T, T120...

Quantity:

+ −

CODE: wash0588

BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72

£0.45 (£0.54 inc VAT)

OEM: 68-0588, 71-4443, E14443

BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72 Rubber O ring seal for oil lines on A50 and A65 models from 1965-72. Also used between the...

Quantity:

+ −

CODE: valv570ss-B18

Oil Pressure Release Valve Triumph T140 Stainless

£39.95 (£47.94 inc VAT)

OEM: 71-3447, E5896, 70-5896

Oil Pressure Release Valve Fits Triumph T140 Bonneville motorcycle Can be used in some other models also Stainless Steel (Made in UK) OEM: 71-3447, E5896,...

Quantity:

+ −

CODE: bear019-F4

Crankshaft Main Bearing Triumph, BSA Timing and Drive sides

£23.95 (£28.74 inc VAT)

OEM: 24-0724, 70-9974, 27-724, 24-724

Crankshaft Bearing BSA C15/B40 T/S - 1967 onwards. C25/B25/B44 T/S and D/S - Roller Type - 1967 onwards. B31/B33/B34 D/S (1946-59), B50 T/S & D/S -...

Quantity:

+ −

CODE: pump-gkt-3910

Triumph Oil Pump Gasket - Unit Twins - 350/500/650/750cc From 1963-83

£0.75 (£0.90 inc VAT)

OEM: 71-3910, E13910

Triumph Oil Pump Gasket - Unit Twins - 350/500/650/750cc From 1963-83 Suitable for models with 4 valve oil pump. Can also be used on 2 valve oil pumps as...

Quantity:

+ −

42-8334, 42-8426 - BSA Oil Tank Filter - Pre Unit A, B and C Group Models - Stainless Steel

CODE: filt582-SS-B3

BSA Oil Tank Filter - Pre Unit A, B and C Group Models - Circa 1954-63

£23.95 (£28.74 inc VAT)

OEM: 42-8334, 42-8426

BSA Oil Tank Filter - Pre Unit A, B and C Group Models - Circa 1954-63 Oil tank filter and drain plug. Correct fitment for BSA A7, A10, B31 and B33...

Options

CODE: filt840m-B3

Oil Sump Filter Gauze - Triumph 350cc + 500cc Unit Twins - OEM: 70-3722

£10.95 (£13.14 inc VAT)

OEM: 70-3722, E3722

Oil Sump Filter Gauze - Triumph 350cc + 500cc Unit Twins Conical type, fits 350/500 unit construction models OEM: 70-3722, E3722

Quantity:

+ −

CODE: stud3114-B19

Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73

£2.95 (£3.54 inc VAT)

OEM: 70-3114, E3114

Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73 Drive side crankshaft to alternator rotor stud - later pre unit...

Quantity:

+ −

CODE: screw4255-brass-B13

Triumph Brass Patent Plate Hammer Drive Rivet / Screw Set

£1.45 (£1.74 inc VAT)

OEM: 60-4255, D208-5, D4255

Triumph Brass Patent Plate Hammer Drive Rivet / Screw Set Set of three brass hammer drive rivets to secure the timing cover triangular name plate as used...

Quantity:

+ −

CODE: nut262-B18

Triumph Crankshaft Sludge Trap Plug - 650cc - 70-3905, E3905

£4.95 (£5.94 inc VAT)

OEM: 70-3905, E3905

Triumph T120/T110 650cc etc (-1968) Hexagonal crank Sludge Trap plug, CEI threads. OEM: 70-3905, E3905

Quantity:

+ −

CODE: nut3732-B13

Oil Pump Nut - 70-3732

£0.95 (£1.14 inc VAT)

OEM: 70-3732

Oil Pump Nut - 70-3732 Triumph Engine Oil Pump Nut, to secure oil pump to engine stud. OEM: 70-3732

Quantity:

+ −

CODE: spring3724-B13

Triumph Oil Sump Filter Retaining Spring - 350/500cc Models

£1.75 (£2.10 inc VAT)

OEM: 70-3724, E3724

Triumph Oil Sump Filter Retaining Spring - 350/500cc Models OD: 7/16" (10.6mm) Length uncompressed: 7/16" (10.8mm) OEM: 70-3724, E3724

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

Account Details

Quick Links

Feked.com

Feked Online