.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

bush3337-B8
£28.95 (£34.74 inc VAT)
OEM: 65-3337
BSA Layshaft Bush - Clutch End - A and B Plunger & Swing Arm Models + C Models To fit BSA A & B Models - Swinging Arm and Plunger + C10 & C11...
+

nut1492-B13
£4.95 (£5.94 inc VAT)
OEM: 70-1492, E1492
Triumph Exhaust Camshaft Nut LH Thread - 500/650cc Pre-Unit Twins Camshaft retaining nut. 5/8" 20 TPI with left hand thread. OEM: 70-1492, E1492
+

gask1444
£1.95 (£2.34 inc VAT)
OEM: 71-1444, 70-6516, E11444, E6516
Triumph/BSA Triples - Sump Gasket - A75 Rocket 3 + T150, T160 Trident Models Sump filter gasket for all BSA and Triumph triples from 1969-75. OEM:...
+

clutch3951-B24
£2.95 (£3.54 inc VAT)
OEM: 57-3951, 57-4121
BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1969-73 - Long Type Clutch spring cup for BSA singles - B50 and later C25/B25 + TR5W models...
+

bush3169-B8
£15.95 (£19.14 inc VAT)
OEM: 67-3169
BSA Kickstart Ratchet Pinion Bush - A, B and C Group Models Circa 1951-62 Correct fitment on plunger and swinging arm A7 and A10 models + swinging arm...
+

nut0124-B14
£3.45 (£4.14 inc VAT)
OEM: 02-0124, 2-124, 27-6716
1/2" x 20 CEI Thin Nut - BSA Camshaft Pinion Nut + Hub Spindle Lock Nut - Various Uses Used to secure the camshaft gear on A7 and A10 models + some early...
+

plate3553-B13
£1.45 (£1.74 inc VAT)
OEM: 71-3553, E13553
Triumph Cylinder Head Bolt Bridge Plate - T140/TR7 Models Circa 1973-83 Cylinder head stud inner bridge plate, correct fitment on 750cc twins. Length:...

wash3770-B13
£2.45 (£2.94 inc VAT)
OEM: 82-3770, F3770
Triumph Serrated Gearbox Clamp Washer - Pre Unit 500/650cc Models Circa 1956-62 Serrated clamping washer, fits on the top gearbox mounting stud to...
+

kick3428-B4
£1.95 (£2.34 inc VAT)
OEM: 65-3428
BSA Kickstart Lever Spring Clip - A and B Group With Folding Type Crank + Bantam D1 and D3 Models Kickstarter crank pedal spring for use with a folding...
+

bearing0732-F4
£7.95 (£9.54 inc VAT)
OEM: 24-0732, 24-732, 70-8003, E8003
BSA/Triumph Crankshaft Main Bearing - BSA C Group Circa 1946-58 + Unit Singles Deep groove open type ball bearing - drive side and/or timing side,...
+

nut3771-B13
£4.45 (£5.34 inc VAT)
OEM: 82-3771, F3771
Triumph Gearbox Clamp Flanged Nut - Drive Side - Pre Unit 500/650cc Models Circa 1955-62 Drive side serrated and flanged nut - locates on the gearbox top...
+

gearbox0372-B18
£8.95 (£10.74 inc VAT)
OEM: 57-0372, T372
Triumph Gearbox Index Plunger Holder - Pre-Unit and Unit 650/750cc Twins and Triples - Circa 1946-72 Gear control camplate plunger bush - correct fitment...
+

tach0586-G15
£35.95 (£43.14 inc VAT)
OEM: 68-0586, 68-586
BSA Tacho Drive / Rev Counter Drive Pin - A50 and A65 Models Circa 1964-72 Tachometer spindle drive shaft with groove for circlip and square end -...
+

renold-530/158
£46.95 (£56.34 inc VAT)
OEM: 110056, D438, 60-0438
Extra Long 530 Renold Classic Motorcycle Chain - 136SR 5/8" x 3/8" - 158 or 194 Links 136SR 5/8" x 3/8" (P x W) standard 530 standard roller final...
 

0.75mm-KS-gasket-paper
£2.75 (£3.30 inc VAT)
KS Gasket Material - 0.75mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet KS is a cost effective grade sealing material with very good...

wash3857
£0.25 (£0.30 inc VAT)
OEM: 70-3857, E3857
Triumph 1/4" Rocker Box Corner Bolt Washer - 350/500cc Models Circa 1959-71 Plain washer as used with the rocker box corner screws on 3TA, 5TA and T100...
+

fkgk813
£17.95 (£21.54 inc VAT)
Triumph Motorcycle - 350cc 3HW, WD Engine Gasket Set 1939-46
+

fkgk815
£34.95 (£41.94 inc VAT)
Triumph Motorcycle - 650cc T120, Bonneville (Pre unit) Engine Gasket Set 1956-62
+

fkgk837
£48.95 (£58.74 inc VAT)
OEM: E8773, 70-8773, E11445, 71-1445, E4752, 70-4752, E11733, 71-1733, E6496, 70-6496, E11350, 71-1350, E11454, 71-1454, E11453, 71-1453
Triumph - 750cc T150 Trident Engine Gasket Set 1972-75 Set contains the following gaskets: Rocker Cover x2, Cylinder Head, Cylinder Base, Push Rod Top...
+

bigend017
£144.95 (£173.94 inc VAT)
OEM: B14, 66-0483 ,65-1614, 66-0481
BSA B31, B32, B33, B34, M20, M21, M22, M23, M24, M33 Big End Bearing (1937-59) Big end Conrod Bearing - To fit con rod no's 66-483, 65-1614, 66-481 Made in...
+

fkclutch218-B23
£8.95 (£10.74 inc VAT)
OEM: 70-5085
TENSION BLADE - Triumph Triumph T140 primary chain tensioner blade. For Triplex Chain Chain Slipper, tensioner. OEM: 70-5085
+

spr064-B24
£2.45 (£2.94 inc VAT)
OEM: 04-0358, 04-0385
Norton AMC Clutch Spring, for Norton AMC Models Price is for One Spring Length: 1+13/16" (46mm) Diameter: 11/16" (17mm) OEM: 04-0358, 04-0385
+

fkgk254
£18.95 (£22.74 inc VAT)
Norton Motorcycle - 500cc 18, ES2 Decoke Gasket Set 1948-55
+

pist288-rings
£44.95 (£53.94 inc VAT)
OEM: R3650
Set of Hepolite Piston Rings for BSA A10 650cc models etc (1952 - 63). Supplied as Hepolite Rings for 2 Pistons. Bore Size : 70mm Standard, available as...

nut2177-B14
£0.95 (£1.14 inc VAT)
OEM: 21-2177
T140/TR7 Cylinder base nut (Outer studs) 1972-82 OEM: 21-2177
+

bolts213-B14
£21.95 (£26.34 inc VAT)
OEM: 00-0122, 67-254, 67-0254, 67-258, 67-0258, 67-283, 67-0283
BSA A7/A10 Iron head cylinder head bolt set (9 Piece set) OEM: 00-0122, 67-254, 67-0254, 67-258, 67-0258, 67-283, 67-0283
+

tappet-1477-B13
£18.95 (£22.74 inc VAT)
OEM: 70-1477, E1477
Triumph Tappet Guide Block - 500/650cc Pre Unit and 650cc Early Unit Models Tappet block for the cam followers, suitable for the following models: Early...
+

valvecollar6439-B13
£4.95 (£5.94 inc VAT)
OEM: 70-6439, E6439
Valve Spring Bottom Collar - Triumph - 70-6439 Triumph various models, valve spring retaining collar, sits under the valve spring between the spring and...
+

clutch2368-B23
£0.75 (£0.90 inc VAT)
OEM: 60-2368, D2368
3/8" Ball Bearing - Single Ball - Universal Use 3/8" (10mm approx) diameter Suitable for use with Triumph Unit Twins fitted with a 3 ball Clutch...
+

gbox1405-B8
£26.95 (£32.34 inc VAT)
OEM: 57-1405, T1405
Triumph High Gear Bush - 350/500cc Unit Models - 1959 Onwards Gearbox mainshaft high gear bush, fits inside sleeve gear to support the mainshaft....
+

spring1136-B18
£10.95 (£13.14 inc VAT)
OEM: 67-1136
BSA Cush Drive Spring - Pre Unit A, B, & M Models - 1955-62 Correct for all swinging arm models with a 2 lobe cush drive cam from 1955-62. Made in...
+

gkset7001
£37.95 (£45.54 inc VAT)
OEM: 71-4619, 71-3573, 71-1283, 70-7310, 71-3673, 71-2599, 70-6309
Triumph 750cc Twins - Universal Engine Gasket Set - All T140 and TR7 Models From 1973 Onwards Engine gasket set containing the gaskets and 'O' rings...
 

spring0497-B18
£1.95 (£2.34 inc VAT)
OEM: 57-0497, T497
Triumph Primary Chaincase Oil Adjuster Spring - Pre Unit Twins Circa 1939-62 Spring for use with the rear chain oiler / oil restrictor screw, as fitted to...
+

kick3162-B4
£1.45 (£1.74 inc VAT)
OEM: 67-3162
BSA Kickstart Ratchet Spring - A, B, C Group Plunger and Swinging Arm + A50 and A65 Models Gearbox mainshaft pinion spring locates between the kickstarter...
+

screwkit-950M-B9
£37.95 (£45.54 inc VAT)
OEM: E1049, E427, E2691 , E329. T452, E573, 70-1049, 70-0427, 70-2691, 70-0329, 57-0452, 70-0573
Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo models Circa 1946-53 Complete set of engine/gearbox screws suitable for 5T, T100,...
+

plug1792-B13
£2.45 (£2.94 inc VAT)
OEM: 82-1792, F1792
Triumph Oil Tank Drain Plug - Pre Unit Models Circa 1946-62 + T20 Models Circa 1959-63 Oil tank drain plug as used on pre unit models from 1946 onwards...
+

bolt0645-B18
£1.95 (£2.34 inc VAT)
OEM: 15-0645
BSA Primary Chaincase/Crankcase Drain Plug Bolt - A7, A10, A50, A65 Models From 1960 Onwards Correct fitment on later A7 and A10 models from 1959 onwards...
+

gear1109
£4.95 (£5.94 inc VAT)
OEM: 57-1109, 40-3061, T1109
Triumph/ BSA Gearchange Return Spring - T20 Tiger Cub + BSA Unit Singles Circa 1959-71 Gear change return spring - correct fitment on T20 Tiger Cub...
+

oilseal3933-B13
£2.95 (£3.54 inc VAT)
OEM: 70-3933, E3933
Triumph T20 Tiger Cub Gearbox Mainshaft Oil Seal Retainer - Circa 1957 Onwards Gearbox mainshaft shaft oil seal retainer - locates behind the clutch. OD:...
+

gkch1449
£2.45 (£2.94 inc VAT)
OEM: 71-1449, E11449, 57-3955, T3955
Triumph/BSA Triples Clutch inspection Cover Gasket - T150 Trident + A75 Models Four hole clutch inspection cover gasket - correct fitment on T150 and A75...
+

gk9511-C
£8.95 (£10.74 inc VAT)
OEM: 70-9511, E9511
Triumph Copper Rocker Box Gasket - 350/500cc Unit Twins Circa 1969-74 Solid copper rocker box joint washer - suitable for T90 and T100 models from 1969...
+

gkt0281
£3.45 (£4.14 inc VAT)
OEM: 67-0281, 67-281
BSA Inner Timing Cover Gasket - All A7 and A10 Models Circa 1949 Onwards Inner timing case joint washer as used on all A7 and A10 models. OEM: 67-0281,...
+

fkgk305
£17.95 (£21.54 inc VAT)
BSA Motorcycle - 250cc C11 Engine Gasket Set 1939-53
+

fkgk061
£11.95 (£14.34 inc VAT)
OEM: E7343, 70-7343, E3751, 70-3751, E1335, 70-1335, NA43, F1880, 82-1880
Triumph Rocker Box Gasket Set. Suit 3TA, T21, 5TA, T100A, 350/500cc 1957-66 For the earlier engine models Comprises of 3 Gaskets and 12 Washers OEM: E7343,...
+

fksprock644-B5
£26.95 (£32.34 inc VAT)
OEM: 68-3073
BSA A50, A65 Gearbox Sprocket 20T Chain Pitch: 5/8" x 3/8" (530) Number of Teeth: 20 OEM: 68-3073, 683073

clplt490-B24
£9.95 (£11.94 inc VAT)
OEM: 15-2419
BSA M20, M21 - Clutch Friction Plates Fits BSA Empire Star and M20 models (-1947) with single spring clutch Inside Diameter: 90.5mm Outside Diameter:...
+

vvg425
£99.95 (£119.94 inc VAT)
OEM: 71-3294, 71-3295, 70-4603, 70-2904
Triumph T140 Bonneville/TR7 750cc (1973-78) Complete Valve guide set. Includes guides and valves. Valve Guides : Set of 4 Bronze Guides (71-3294 and 71-3295)...
+

bolt735H-B19
£3.95 (£4.74 inc VAT)
OEM: 21-2200
Triumph T140, Cylinder head stud (centre 5/16" stud) OEM: 21-2200
+

engine836-B18
£1.75 (£2.10 inc VAT)
OEM: 70-4569
Triumph Contact point Circlip - 70-4569 Circlip for Contact point seal. Fits Triumph 650cc and 750cc models. OEM: 70-4569
+

piston2891
£86.95 (£104.34 inc VAT)
OEM: 70-2891
Harris Pistons for Pre-Unit Triumph 6T thunderbird 650cc - 70-2891 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons,...

screw081H-B18
£0.45 (£0.54 inc VAT)
OEM: 70-8177, 57-4672
Contersunk Screw - Rotor Cover - 70-8177 To screw the rotor cover on the primary chaincase OEM: 70-8177, 57-4672
+

pipe5285-B2
£1.95 (£2.34 inc VAT)
OEM: 83-5285, F15285
Triumph 'D' Type Crankcase Breather Hose/Pipe - T140/TR7 - 1974-78 This hose runs from the crankcase to the 'T' piece As fitted to 750cc T140/TR7 Tiger...
+

pist1192
£121.95 (£146.34 inc VAT)
OEM: 66-1192
Gandini/GPM Piston - BSA M20 - 500cc Single Supplied as 1 Piston, complete with rings, gudgeon pin and circlips 2x 3/32" Piston rings - 1st & 2nd...

plug6347-B13
£2.95 (£3.54 inc VAT)
OEM: 70-6347, E6347
Triumph Primary Chain Oil Drain and Adjuster Plug - Short Type - 650cc Twins from 1966-70 Short type with BSF thread - used on T120 and TR6 models from...
+

spring3247-B24
£1.95 (£2.34 inc VAT)
OEM: 67-3247
BSA Clutch Spring - A7, A10 Plunger & Rigid Frame Models - 6 Spring Clutch BSA clutch spring for six spring clutches as fitted to BSA A Group plunger...
+

clutch170-B23
£1.45 (£1.74 inc VAT)
OEM: 41-3212, 57-2723, 41-3211
BSA Unit Singles Clutch Cush Rubber - B25, B40, B44, B50, C15 Clutch cush rubber as used on 4 plate clutches on BSA unit singles circa 1959-70 + Triumph...
+

gkch1057
£3.45 (£4.14 inc VAT)
OEM: 57-1057, T1057
Triumph Pre Unit Primary Chaincase Gasket - 5T, 6T Alternator Models - Circa 1953-54 Fits 500/650cc pre-unit rigid frame models with the long alternator...
+

off-ren428-spring
£2.95 (£3.54 inc VAT)
428 Renthal R1 MX Chain Connecting Spring Link - 1/2" x 5/16" Pitch Split/master link for use with 428 Renthal R1 MX Chain - premium quality for trials,...
+

off-esprk449
£29.95 (£35.94 inc VAT)
OEM: 70-3912, E3912
Triumph T20 Tiger Cub  - Duplex Engine Primary Drive Sprocket - 16T Crankshaft sprocket for Triumph Tiger Cub trials/competition models. Will require the...
+

clutch0422-B23
£1.45 (£1.74 inc VAT)
OEM: 57-0422, T422
Triumph 4 Spring Clutch Pressure Plate Thrust Button - Pre Unit 350/500/650cc Models Circa 1946-62 Clutch push rod cup for all pre unit models with a 4...
+

hub3170-B23
£39.95 (£47.94 inc VAT)
OEM: 42-3170
BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

stud1539-B19
£2.95 (£3.54 inc VAT)
OEM: 70-1539, E1539
Triumph Crankcase Oil Pipe Block Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil junction block to crankcase stud - correct fitment on pre-unit...
+

bolt6505-B14
£0.45 (£0.54 inc VAT)
OEM: 14-6505
1/4" UNC x 7/8" Countersunk Screw - Triumph Unit 500cc Models + Universal Use Flat head slotted screw as used on T100 models from 1969 onwards: Gearbox...
+

nut0585-C14
£2.95 (£3.54 inc VAT)
OEM: 21-0585, S585
Triumph Rear Wheel Spindle Nut - T100, T120, T150 and T160 Models From 1970 Onwards Rear axle nut on later T100 and T120 models + 750cc triples from 1970...
+

wash8134
£0.15 (£0.18 inc VAT)
OEM: 70-8134, 36-0382, 01-4117, E8134
5/16" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit BSA/Triumph Models Shakeproof serrated washer as used to secure bolts -...
+

nut3772-B13
£4.45 (£5.34 inc VAT)
OEM: 82-3772, F3772
Triumph Gearbox Adjuster Sleeve Nut - Pre Unit 500/650cc Models Circa 1955-62 Timing side sleeve nut - locates on the gearbox top clamp stud to position...
+

nut5664-B13
£9.95 (£11.94 inc VAT)
OEM: 15-5664
BSA Gearbox Adjuster Nut - A, B and M Group - Rigid, Plunger and Swinging Arm Models Gearbox adjusting bolt nut - correct fitment on swinging arm A7,...
+

trun5977-B18
£1.45 (£1.74 inc VAT)
OEM: 70-5977, E5977
Triumph Primary Chain Tensioner Blade Trunnion - 500/650cc Models Circa 1966-73 + T150 Models Correct fitment on T90 and T100 models circa 1966-67 + T120...
+

nut4103-B14
£1.95 (£2.34 inc VAT)
OEM: 70-4103, 70-5897, E4103, E5897
Triumph Cylinder Head Sleeve Nut - T20 Tiger Cub Models Circa 1954-68 Zinc plated cylinder head nut suitable for T15 Terrier and T20 Tiger Cub models....
+

sprock-nut1082-B18
£4.95 (£5.94 inc VAT)
OEM: 57-1082, T1082
Triumph Gearbox Sprocket Nut - T15 Terrier and T20 Tiger Cub Models Circa 1954-69 Correct fitment on all T15 and T20 models - holds the front gearbox...
+

cap0209-B13
£3.95 (£4.74 inc VAT)
OEM: 65-0209, 65-209
BSA Inlet Valve Stem Cap - B31 Models Circa 1946-60 + Iron Head B32 Models Circa 1949-53 Inlet valve stem cap to fit the  65-1511 inlet valve with 0.31"...
+

fkgk165w
£27.95 (£33.54 inc VAT)
Matchless Motorcycle - 500cc G80, G80S Engine Gasket Set 1949-61. Matchless G80, Matchless G80S 500cc - Complete Engine Gasket Set from 1949 to 1961 The...
+

pist032-tri
£124.95 (£149.94 inc VAT)
OEM: 70-9741, 70-9761, 70-9762, 70-9763, 70-9764
Set of Hepolite Pistons for Triumph Trident T150/T160 750cc. Supplied as 3 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore Size :...

clutchhub-310-B23
£38.95 (£46.74 inc VAT)
OEM: G37-3
Clutch hub for the AJS, Matchless Heavyweight singles, 350cc, 500cc Burman 5 plate clutch hub Burman, AJS, Matchless Clutch Centre 5 plate for AMC...
+

bolts2980b-B19
£2.25 (£2.70 inc VAT)
OEM: 31-222, 31-0222, 67-0280, 70-2980
BSA Engine Stud - 31-222 Coarse thread to screw into the engine, and fine thread for the nut. OEM: 31-222, 31-0222, 67-0280, 70-2980
+

screw6609-B19
£1.75 (£2.10 inc VAT)
OEM: 14-6609
Triumph 1/4" UNC Cheese Head Screw - 500/650/750cc Models Circa 1969-79 Cheesehead screw - used extensively on unit singles, twins and triples from 1969...
+

piston-rings-cp165
£18.95 (£22.74 inc VAT)
OEM: CP165, 70-3691, 70-3690, 70-3692, E3691, E3690, E3692
Harris Piston Rings For Triumph 350cc Unit Models - Circa 1959-1966 Suitable for 3TA and T90 models circa 1959-66. Supplied as a full sets of piston rings...

clutch7033-B18
£16.95 (£20.34 inc VAT)
OEM: 57-7033, 57-3629, 57-4587, 58-0001
Triumph Clutch Operating Lever / Lifter Assembly - 650/750cc Unit Twins Circa 1968-85 Complete ready to fit clutch lever assembly, includes: clutch lever,...
+

gkt3068
£2.45 (£2.94 inc VAT)
OEM: 66-3068
BSA Outer Gearbox Gasket - M20 and M21 Models - Circa 1937-48 Gearbox cover joint washer as used on early and WD models. OEM: 66-3068 Made in England
+

fkgk820A
£33.95 (£40.74 inc VAT)
Triumph Motorcycle - 350cc 3TA, Twin T21, Tiger 90 (T90) Engine Gasket Set 1965-68
+

fkgk832
£39.95 (£47.94 inc VAT)
Triumph Motorcycle - 650cc Trophy TR6C, Bonneville, T120R, Tiger TR6R Engine Gasket Set 1971-72 Triumph Trophy TR6C, Triumph Bonneville T120R, Triumph Tiger...
+

nut3761-B14
£1.35 (£1.62 inc VAT)
OEM: 60-3761, D3761
Triumph T100/T120 and T140/T100 Lester nut UNF (Later models). Also fits BSA B25. OEM: 60-3761, D3761
+

pist100
£82.95 (£99.54 inc VAT)
OEM: 70-6884, 70-6884/20, 70-6884/40, E6884, E6884/20, E6884/40
Pair of Hepolite Pistons for Triumph T100 500cc Daytona models (1968-74). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips....

pist035
£82.95 (£99.54 inc VAT)
OEM: OEM: 71-3778, 71-3686, 71-3687, 71-3689, 19255
Pair of Hepolite Pistons for Triumph T140/TR7 750cc models (1972-). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore...

bear166-B8
£59.95 (£71.94 inc VAT)
OEM: 67-0790, 67-0653, 67-0908
BSA A7, A10 Timing side main bush available as STD, -.010, -.020, -.030 OEM: 67-0790, 67-0653, 67-0908

2.0mm-paper
£2.45 (£2.94 inc VAT)
Cellulose Paper Gasket Material - 2.0mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet General Properties - a cellulose fibre base...

smallend285-B8
£4.95 (£5.94 inc VAT)
OEM: 67-0298, SE109
BSA Small End Bearing - 67-0298 A10, A10SR, A10RR, A50, A65 (1950-71) OEM: 67-0298, SE109
+

valve044-B2
£16.95 (£20.34 inc VAT)
OEM: E3310, 70-3310
Triumph 650cc Inlet Valve - 70-3310 T110, TR6 (1954-57) TR6, 6T, T110 Thunderbird (1958-66) T120 Bonneville (1959-63) Inlet Valve (Alpha valve no.V137)...
+

pipeset3355-B3
£43.95 (£52.74 inc VAT)
OEM: 70-3355
Triumph Engine Oil Pipe Assembly 500cc/650cc 1953- - 70-3355 Nickel plated steel pipe assembly that feeds and returns oil to and from the oil pump at the...
+

bolt3979-B14
£3.95 (£4.74 inc VAT)
OEM: E3979, 70-3979
Bolt - Screw for RM15 Alternator - 70-3979 To secure the alternator stator on early pre-unit Triumph models. OEM: E3979, 70-3979 Made in England
+

nut997-B18
£5.45 (£6.54 inc VAT)
OEM: 67-1211
BSA Large Journal Crankshaft Sludge Trap Plug - A10, A50 and A65 Models  To fit large journal crankshafts as used on pre-unit A10 models from 1958-62 and...
+

clutch1937-B23
£0.95 (£1.14 inc VAT)
OEM: 57-1937, T1937
Triumph Clutch Actuating Arm / Spoke Nut  - 350/500/650cc Unit Models OD: 1/4"" (6.4mm) OEM: 57-1937, T1937
+

gear0268-B8
£41.95 (£50.34 inc VAT)
OEM: 90-0268, 90-268
BSA Bantam Gear Lever - D1, D3, D5, D7, D10, D14 and D175 Models As used on all Bantam models. Overall length: 6+11/16" (17cm) Splined shaft diameter:...
 

shim0633-set-3-B18
£6.45 (£7.74 inc VAT)
OEM: 68-0633, 68-0634, 68-0635, 68-633, 68-634, 68-635
BSA Crankshaft Shim Set - A50, A65 From 1966 Onwards Set of 3 shims: OD: 1+3/4" (44.3mm) ID: 1+1/4" (32mm) 1x 0.010" 1x 0.006" 1x 0.003" Made in England...
+

piston-rings-789
£35.95 (£43.14 inc VAT)
OEM: 71-3690, 71-3695, 99-3791, 99-3792, 99-3789, 71-3692, 71-3697
Engine Set of Harris Piston Rings for Triumph 750cc models - TR7, T140 etc (1974-). Supplied as 2 sets of Piston Rings = Top ring, 2nd Ring, Oil Scraper...

off-ren420-spring
£3.45 (£4.14 inc VAT)
420 Renthal R1 MX Chain Connecting Spring Link - 1/2" x 3/16" Pitch Split/master link for use with 420 Renthal R1 MX Chain - premium quality for trials,...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.