.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

seal354-B7
£11.95 (£14.34 inc VAT)
OEM: 57-0946, 68-0027, 68-27, T946, 57-0946, 11268-0026, 11468-0235, 11967-0674, 68-235, 68-0235
Oil Seal Set - Engine and Gearbox To suit BSA A50, A65, 1962-1973 Contains: Contact point (camshaft) seal, Crank seal, Clutch seal, Gearbox seal, Chain case...
+

clip732m-B18
£1.25 (£1.50 inc VAT)
OEM: 70-3209
Valve Guide Circlip as fitted to Triumph T140, T100, T20 and BSA C15 models. OEM: 70-3209
+

clutch1931H-B24
£3.95 (£4.74 inc VAT)
OEM: T1931, 57-1931, 68-3287, 42-3197, 57-0998
Triumph/BSA Clutch Spring Cup - 3 or 4 Spring - Pre Unit and Unit Models - 1951 Onwards To fit 3 spring AND 4 spring clutch plate hubs. Correct fitment...
+

washer1713
£0.99 (£1.19 inc VAT)
OEM: 82-1713
Washer - Triumph Oil Filter Adapter - 82-1713 Fits between the filter and the tank. Suit Triumph and BSA OEM: 82-1713, 40-8331
+

filt0529-B3
£17.95 (£21.54 inc VAT)
OEM: 70-0529, E529
Triumph Pre Unit Crankcase Sump Oil Filter Gauze - All Models to 1962 Correct fitment for all pre unit twins 350/500/650cc - 3T, T100,  5T, 6T, T110,...
+

gkch4100
£2.45 (£2.94 inc VAT)
OEM: 70-4100, 70-4871, E4100, E4871
Triumph T20 Tiger Cub Primary Chaincase Cover Gasket Suitable for the  later distributor and points in side models circa 1960-68. OEM: 70-4100, 70-4871,...
+

wash7518
£0.15 (£0.18 inc VAT)
OEM: 66-7518
1/4" Fibre Washer - BSA Primary Chaincase / Crankcase Drain Plug + Universal Use Locates on the chaincase drain plug bolt on later A7 and A10 models from...
+

seal1707
£3.95 (£4.74 inc VAT)
OEM: 71-1707, E11707
Triumph Push Rod Tube Collar / Sleeve - 500/650/750cc Twins From 1971 Onwards Zinc plates steel pushrod seal collar - locates between the tappet guide...
+

valv571-B18
£59.95 (£71.94 inc VAT)
OEM: 70-4191, 70-2795, E4191, E2795
Oil Pressure Release Valve (With Tell Tale) Stainless Steel Body. Fits Triumph T110 and Triumph T120. (UK Made) Will fit most Triumph Pre-Unit 350, 500 &...
+

seal248
£2.25 (£2.70 inc VAT)
OEM: 60-3500, 70-3833, E3833
CLUTCH OIL SEAL - Triumph - for the clutch back plate Clutch back plate Oil seal for Triumph 3TA/5TA/T90/T100 350/500cc (1957-67), High gear inner and...
+

nut0586-B23
£4.95 (£5.94 inc VAT)
OEM: 21-0586, S586
Triumph Clutch Centre Lock Nut - 350/500/650/750cc Unit Twins from 1968-83 9/16" UNF Thread x 18TPI - Self Locking OEM: 21-0586, S586
+

wash9555
£0.95 (£1.14 inc VAT)
OEM: 70-9555, E9555
Triumph Intake Manifold Carburettor Cupped Washer - 650/750cc Unit Twins Carburettor mounting washer to fit T120, TR6, T140, TR7 models from 1970-78....
+

off-ren420
£34.95 (£41.94 inc VAT)
420 Renthal R1 MX Chain - Ideal For Trials/Motocross - 1/2" x 3/16" Standard Chain Top quality heavy duty non 'O' ring chain  designed specifically to...

c/s-tube3903-B13
£9.95 (£11.94 inc VAT)
OEM: 70-3903, E3903, 68-0185, 68-185
Triumph/BSA Crankshaft Sludge / Oil Tube - 500/650/750cc Twins Circa 1959-82 Crankshaft oil tube, sludge trap - correct fitment on pre unit T100, 6T,...
+

hub3929-B23
£37.95 (£45.54 inc VAT)
OEM: 57-3929, 68-3277, 57-1734, T1734, T418, 57-0418
Triumph/BSA Clutch Hub Sleeve - 650/750cc Unit Twins From 1963 Onwards This is the clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

valv048-B18
£4.95 (£5.94 inc VAT)
OEM: 60-2045
Triumph Oil Pressure Sensor Rubber boot. Fits 500,650,750cc models from 1969 onwards. This rubber is a reproduction of the Original and is used to cover the...
+

pipe4159
£21.95 (£26.34 inc VAT)
OEM: 70-4159, E4159, 70-3082, E3082, 70-6349, E6349
Triumph T120/TR6, 650cc Rocker Oil Feed Pipe Available as standard or UK made - please select option. Can be used instead of 71-2428, E12428, 70-6349,...

nut2016-B14
£3.95 (£4.74 inc VAT)
OEM: 21-2016, S2016, 60-3761, D3761, 21-0549, S549
Triumph Con Rod Big End Nut - Unit 650cc Twins + T150, TR25W and BSA B25 Models - Circa 1969-73 Self locking connecting rod nut - correct fitment on T120,...
+

clplt274b-B24
£6.95 (£8.34 inc VAT)
OEM: 57-2726, 40-3233
BSA C15, C25, B25, B40, B44, B50 Clutch Friction Plates. Inside Diameter: 94mm Outside Diameter: 135mm Stub Length: 5.8mm OEM: 57-2726, 40-3233
+

wash1330-B13
£0.75 (£0.90 inc VAT)
OEM: 70-1330, 40-0157, E1330, 40-157
Triumph / BSA Rocker Spindle Thrust Washer - Various Pre Unit and Unit Models Correct fitment on pre unit and unit models - singles, twins and triples...
+

fkgk057
£11.95 (£14.34 inc VAT)
OEM: 67-1582, 36-0481, 15-203,15-0203, 67-0279, 67-1583
BSA A7, A10, 500cc, 650cc Rocker Box Gasket Set Suit A7, A10, Star, Shooting Star, Golden Flash, Road Rocket, Super Rocket models. Comprises of 5 gaskets...
+

box994P-3/4-G15
£41.95 (£50.34 inc VAT)
OEM: BG 5330/287, 99-9976, 60-0373, D373, 19-9205, 024448, 02-4448
Speedometer Gearbox 2:1 Ratio With 3/4" or 15/16" Wheel Spindle Mounting Hole Right hand fit 2:1 ratio speedo drive suitable for various marques and...
 

filt217B-B3
£34.95 (£41.94 inc VAT)
OEM: 70-0486
Triumph Billet Sump Plate with Magnetic Hole - Pre Unit Twins Circa 1945-62 CNC Manufactured from solid billet alloy. Alloy plate with drain plug - quick...
+

clutch046-B23
£2.95 (£3.54 inc VAT)
OEM: 57-0495, T495
Clutch Lever Rubber - Triumph - 57-0495, T495 Triumph Pre-Unit Clutch lever rubber boot. OEM: 57-0495, T495
+

washer4262
£0.45 (£0.54 inc VAT)
OEM: 60-4262, PT104B, D4262
Triumph/AMC Fibre Sealing Washer - 60-4262 Used in various places on Triumph, AJS and Matchless bikes, including the oil tank washer. OEM: 60-4262,...
+

pump-gkt-preunit-03
£1.00 (£1.20 inc VAT)
OEM: E1537, 70-1537
Triumph Pre-Unit Oil Pump Gasket 70-1537 500cc, 650cc etc OEM E1537, 70-1537
+

fkchainsss420
£9.95 (£11.94 inc VAT)
OEM: 110044
420 Standard Classic Motorcycle 125EBSR 1/2" x 3/16" Chain - Triple SSS - 100 to 136 Links Supplied with a connecting spring link. 125EBSR 1/2" x 3/16"...

nut057H-B18
£2.75 (£3.30 inc VAT)
OEM: 21-0544, S544
Triumph T120, T140 Primary Chaincase Dome Head Nut - 21-0544 UNF Dome Head Nut 5/16" (Chrome plated) OEM: 21-0544, S544
+

pipe3805-224
£23.95 (£28.74 inc VAT)
OEM: 70-7576, E7576, 70-3805, E3805, 70-6351, E6351
Triumph Rocker Oil Feed Pipe - 350/500cc Unit Models - 1957 Onwards A rocker oil feed pipe and banjo assembly to fit 350/500cc unit twins. Designed to...
+

wash1612
£0.15 (£0.18 inc VAT)
OEM: 70-1612, E1612, 70-2312, E2312
Triumph 1/4" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit Models Shakeproof serrated washer as used to secure bolts - engine,...
+

fkgk327
£30.95 (£37.14 inc VAT)
BSA Motorcycle - 250cc C15, C15 Sports Star SS80 - Engine Gasket Set 1959-67
+

pump-gkt-unit-02
£1.00 (£1.20 inc VAT)
OEM: E11461, 71-1461
Triumph Unit Oil Pump Gasket 500cc, 650cc, 750cc etc OEM E11461, 71-1461
+

valve011-B22
£16.95 (£20.34 inc VAT)
OEM: E2904, 70-2904
Triumph 650/750cc Exhaust Valve - 70-2904 Exhaust Valve 6T/T120/T140 (1955-83) (Alpha Valve no.V24) Head Diameter: 1.437 Stem Diameter: 0.3095 Length:...
+

nut4264-B14
£0.95 (£1.14 inc VAT)
OEM: 60-4264, GS662, D4264
1/4" x 26 TPI CEI Nut - Triumph Rocker Box Stud/Oil Tank Mounting + Other Uses Used extensively on many Triumph unit models. Rocker box stud nut on...
+

nut-DS48-B14
£1.95 (£2.34 inc VAT)
OEM: DS48, DS-48, 02-0052, 99-3557, 15-5753
1/2" x 20 CEI Standard Nut - Various Uses on BSA, Triumph and AMC Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...
+

gkch7507-cork
£5.95 (£7.14 inc VAT)
OEM: 42-7507
BSA Primary Chaincase Cork Gasket - A and B Group Swinging Arm Models - Circa 1954-63 Suitable for swinging arm A7 and A10 models from 1954-63 + B31 and...
+

filt3179H-ZP-B3
£23.95 (£28.74 inc VAT)
OEM: 82-3179, F3179, 40-8328
Triumph/BSA Oil Tank Filter - Triumph Pre Unit and Unit Twins + BSA C15, B40, B44 - Zinc Plated Spigot type oil tank filter with zinc plated steel body...
+

clplt335-B24
£6.45 (£7.74 inc VAT)
OEM: 67-3240, G-39-4
BSA, AJS, Matchless, Ariel, Panther, Vincent - Clutch Steel Plates Plain steel clutch plate - available as 0.03" (0.82mm), 0.08" (2mm) and 0.09" (2.41mm)...

kick274-B4
£4.95 (£5.94 inc VAT)
OEM: 67-3174
BSA A & B Group. Fits A7, A10, B31, B33, C10, C11 Kickstart return spring OEM: 67-3174
+

clutch557-B23
£3.45 (£4.14 inc VAT)
OEM: 41-3215, 57-2748, 57-1146, 40-3219
BSA/Triumph Clutch Spring Nut - Unit Singles - C15, B25, B40, TR25W, T20 Fits BSA Unit singles, clutch spring nut. Fits BSA C15/B25/B40/B50 Also fits...
+

vguide3208t
£9.45 (£11.34 inc VAT)
OEM: E3208, 70-3208, G461
Triumph Inlet / Exhaust Valve Guide - T20 Tiger Cub + 350/500cc Twins Circa 1957-66 - Standard or Oversize Suitable for both inlet and exhaust on many...

fk520half
£5.45 (£6.54 inc VAT)
520 Regina Classic Motorcycle Chain Half Link To fit 135RESR 5/8" x 1/4" (P x W) standard 520 chain equivalent to Renold 110054. Allows you to make up...
+

gkt700
£1.95 (£2.34 inc VAT)
OEM: 57-7012
Triumph 650cc, 750cc Unit models (T140) inner gearbox gasket OEM: 57-7012, W7012
+

key1558-B13
£2.45 (£2.94 inc VAT)
OEM: 70-1558, E1558
Triumph Camshaft Pinion Woodruff Key - Pre-Unit & Unit Twins Locates the camshaft pinion to the camshaft - both inlet and exhaust. Length: 5/16"...
+

seal7565
£1.95 (£2.34 inc VAT)
OEM: 70-7565, E7565
Triumph Clutch Back Plate Oil Seal - 500/650cc Unit Models from 1968 Onwards Gearbox sprocket cover plate oil seal. Correct fitment for T120 and TR6...
+

gkch1313
£3.95 (£4.74 inc VAT)
OEM: 57-0504, T504
Triumph Pre-Unit Primary Chaincase Gasket - Long Dynamo Type - Rigid Frame - 1939-53 Fits 500/650cc pre-unit rigid frame dynamo or mag/dyno models from...
+

gearbox0405-B18
£1.45 (£1.74 inc VAT)
OEM: 57-0405, T405
Triumph Gearchange Quadrant Plunger Spring - Pre Unit Models + Unit 650/750cc Twins and Triples Gearbox plunger spring as used on four or five speed...
+

wash3723
£0.75 (£0.90 inc VAT)
OEM: 70-3723, E3723
Triumph Oil Sump Filter Cork Sealing Washer - Unit 350/500cc Models Cork sump filter sealing gasket as used 3TA, 5TA, T100 and TR5T models from 1959...
+

spr034-B24
£1.95 (£2.34 inc VAT)
OEM: 57-1560
Triumph Clutch Spring, for Triumph 350cc, 500cc (Late 3 Spring models) Price is for One Spring Length: 2" (50mm) Diameter: 5/8" (16mm) OEM: 57-1560
+

gkt999
£2.45 (£2.94 inc VAT)
OEM: 67-3346
BSA A10, A7 etc - Inner Gearbox Gasket OEM: 67-3346
+

pipe1614-B2
£8.45 (£10.14 inc VAT)
OEM: 83-1614, F11614
Triumph 'D' Type Crankcase Breather Hose/Pipe - Unit Twins - 1970-73 As fitted on T100/T120/TR6 Oil in frame models Silver coloured 'D' shaped pipe...
+

seal1497
£1.25 (£1.50 inc VAT)
OEM: 70-1497, 70-3547, E1497, E3547
Triumph Push Rod Tube Top Seal - Fibre Type - 350/500/650cc Pre Unit and Early Unit Twins Fibre upper push rod joint washer as used on various models...
+

seal6299
£0.65 (£0.78 inc VAT)
OEM: 70-6299, E6299, 40-0418, 57-3620, 70-7431, E7431
Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards O ring seal for the adjuster plug as used on all unit twins from...
+

pump-mor-13
£89.95 (£107.94 inc VAT)
OEM: 70-3072, E3072, GS326
Triumph Plunger Type Oil Pump - Pre Unit Models Circa 1949-62 - Made in England by Morgo A high performance dual plunger oil pump for pre unit 3T, 5T,...
+

clip238H-B18
£1.45 (£1.74 inc VAT)
OEM: 70-4671, E4671
Triumph Unit models Rocker cover inspection Cap Spring Retaining Clip OEM: 70-4671, E4671
+

kick352
£1.75 (£2.10 inc VAT)
OEM: 57-1956
Oil Seal for the Kick Start Shaft - Fits Triumph 650cc and 750cc Models Triumph T120/TR6 - 1963-1974 T150/T160 - 1968 onwards OEM: 57-1956
+

shim0066-B18
£6.95 (£8.34 inc VAT)
OEM: 40-0065, 40-0066, 40-0069, 40-66, 40-69
BSA Crankshaft Shim Set - Unit Singles - C15, B25, B40, B44, B50 Also used to shim between the alternator and crankshaft on A50 and A65 models. Set of 5...
+

clutch6283-B18
£12.95 (£15.54 inc VAT)
OEM: 70-6283, E6283
Triumph Primary Chain Tensioner Blade - 350/500cc Unit Twins Circa 1961-74 Primary chain tensioner blade suitable for 3TA, T90, 5TA and T100 models. For...
+

fkgk828
£42.95 (£51.54 inc VAT)
OEM: E3730, 70-3730, E4675, 70-4675, E7563, 70-7563, E6772, 70-6772, E8771, 70-8771, E3751, 70-3751, E7310, 70-7310, E3798, 70-3798, E9511, 70-9511, E4156, 70-4156, E3832, 70-3832
Triumph Motorcycle - 500cc T100T S/S, T100S, Tiger 100 Engine Gasket Set 1970-73 Set contains the following gaskets: Rocker Cover x2, Cylinder Head,...
+

kick016-G3
£38.95 (£46.74 inc VAT)
OEM: 04-0434, 040434, 04.0434
Folding Kickstart Lever - Norton + AMC Heavyweight Singles and Twins Chrome plated kickstart lever assembly - folding type with crank, pedal, clamping...
+

push4746
£1.05 (£1.26 inc VAT)
OEM: 70-4746
Triumph Push Rod Steel Washer Steel cup, T90, T100, T120, T140, T150 OEM:  70-4746
+

domenut1531-B13
£2.95 (£3.54 inc VAT)
OEM: 97-1531, H1531
Triumph Primary and Gearbox Cover Dome Nut - Unit 650cc Models Circa 1963-68 Chrome plated acorn nut used to secure both the primary chaincase cover and...
+

gearbox0373-B18
£1.95 (£2.34 inc VAT)
OEM: 57-0373, T373
Triumph Gear Change Selector Index Plunger Spring - 350/500/650cc Length (uncompressed) 2+1/2" (63.5mm) OD: 5/16" (8.2mm) OEM: 57-0373, T373
+

shim0671-B18
£6.95 (£8.34 inc VAT)
OEM: 67-0671, 67-671, 67-672, 67-677, 67-0672, 67-0677
BSA Crankshaft Shim Set - A10, A7 ID: 1+1/4" (31.5mm) OD: 1+11/16" (42.2mm) 2x 0.001" 2x 0.005" 1x 0.010" Made in England OEM: 67-0671, 67-671, 67-672,...
+

pillarbolt7680-B13
£1.95 (£2.34 inc VAT)
OEM: 70-7680, E7680
Triumph/BSA Contact Breaker Pillar Bolt - Various Models To secure the contact points set on side points models, also secures the points cover. Correct...
+

fkgk3743
£2.85 (£3.42 inc VAT)
OEM: 70-3743, E3743
Triumph Rocker Box Gasket - 350/500cc Unit Models Circa 1958-68 Original type rocker box gasket without the pushrod holes, as used on earlier 3TA, T90,...
+

gk2894
£1.95 (£2.34 inc VAT)
OEM: 70-2894, E2894
Triumph Cylinder Base Gasket - 500/650cc Pre Unit + 650cc Unit Models Circa 1950-65 Cylinder base washer -  correct fitment on pre unit T110, 6T, T120...
+

bigend211-B3
£18.95 (£22.74 inc VAT)
OEM: 70-3586, B2026M, E3586
Triumph Big End Bearing Shells Pre Unit and Unit 650cc Models + T140 and TR7 - 010 Triumph T120/TR6 (1956-75), T140/TR7 (1973-) Big End Shell Set. Also...
+

smallend134-B8
£12.95 (£15.54 inc VAT)
OEM: 6-0492, SE13
BSA Singles Small End Bearing - 66-0492 B31, B32, B33, B34, B40, SS90, B44, B50, M33, M22, M23, M24 (1937-66) Small end bush, piston pin bush, gudgeon pin...
+

clutch3910-B18
£12.95 (£15.54 inc VAT)
OEM: 65-3910
BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch Clutch bearing set of inner bearing race with ball bearings...
+

bush0023-B4
£8.95 (£10.74 inc VAT)
OEM: 57-0023, T23
Triumph Kickstart Spindle Outer Bush - 350/500/650cc Pre Unit + 650/750cc Unit Models Gearbox outer cover bush that supports the kickstart shaft. Correct...
+

wash0644-B18
£1.25 (£1.50 inc VAT)
OEM: 67-0644, 67-644
BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards Half time pinion lockwasher as used on all A50 and A65 models from...
+

renold-530/half-link-B12
£5.95 (£7.14 inc VAT)
530 Renold Classic Motorcycle Chain Half Link - 136SR 5/8" x 3/8" Double cranked link to fit Renold 136SR 5/8" x 3/8" (P x W) standard 530 standard...
+

seal359-B7
£7.95 (£9.54 inc VAT)
OEM: 70-4568, 70-3379, 97-1168, E4568, E3379, H1168
Oil Seal Set - Engine and Gearbox - Triumph T20 Tiger Cub Models - 1963 Onwards Suitable for T20 Tiger Cub models circa 1963-1967. Kit contains: side...
+

pmp223
£239.95 (£287.94 inc VAT)
OEM: 65-2589, 65-2619
BSA Oil Pump Assembly - Pre Unit Singles - B, C and M Group Models Circa 1940-62 Complete oil pump suitable for B31, B32, B33, B34, M20, M21 C10L,...
+

520-reg-spring
£4.45 (£5.34 inc VAT)
520 Regina Classic Motorcycle Chain Connecting Spring Link Split/master link for use with standard roller 520 motorcycle chain. Premium quality - Made...
+

gkch015
£2.95 (£3.54 inc VAT)
OEM: 70-7856
Primary Chaincase Gasket - BSA B44 (1968-70), B25, C25, B50 , Triumph TR25W, T25, B25, C25 This is for SOME models, please see our other gasket gkch004 for...
+

bush3988-B13
£2.95 (£3.54 inc VAT)
OEM: T3988, 57-3988, PT108B
Triumph Gearbox Mainshaft Clutch Push Rod Bush Triumph Gearbox Mainshaft Clutch Rod Bush Sleeve that fits inside the shaft, to support the clutch push...
+

washer3164-B4
£1.00 (£1.20 inc VAT)
OEM: 67-3164, 68-3301
Kickstart Lock Washer - BSA - 67-3164 BSA Kickstart lockwasher - tab washer, tab lockwasher OEM: 67-3164, 68-3301
+

kick50-G3
£39.95 (£47.94 inc VAT)
OEM: 57-3797, T3797, 57-4760, T4760
Triumph Kickstart Lever Assembly - Unit 350/500cc Twins Circa 1968-74 - Longer Type Correct fitment on later T90 and T100 models from 1968-74. Tiger...
+

studset426-B14
£9.95 (£11.94 inc VAT)
OEM: 70-2980, E2980, 31-0222, 70-8012, 70-3302, 82-0879, F879
Triumph Rocker Box Stud and Nut Set - 650cc Unit Models Circa 1963-70 Rocker box to cylinder head - six studs, washers and nuts. Correct fitment on 650cc...
+

capNT367-B4
£13.45 (£16.14 inc VAT)
OEM: NT367, 99-3544
Triumph Primary Chaincase Filler/Inspection Cap - Pre Unit Models Circa 1939-62 Cast alloy chaincase oil filler plug embossed with 'USE LIGHTOIL -...
+

seal0948
£1.25 (£1.50 inc VAT)
OEM: 57-0948, T948
Gearbox Speedo Drive Shaft Square O Ring - Triumph Pre Unit 500/650cc Models From 1949-62 Square section rubber sealing ring / speedo drive plug - locates...
+

nut2922-B14
£1.95 (£2.34 inc VAT)
OEM: 70-2922, 70-1530, E2922, E1530
Conrod Big End Nut - Triumph Pre Unit and Unit 250/500/650cc Singles and Twins - Circa 1946-70 Self locking connecting rod nut - correct fitment on pre...
+

clutch0861-B23
£0.65 (£0.78 inc VAT)
OEM: 68-0861, 68-861
BSA Primary Chain Tensioner Screw Oil Seal Washer - A50 and A65 Models Circa 1965-72 Oil seal washer with rubber insert, locates over the adjuster screw -...
+

tappet3059R-LFH
£39.95 (£47.94 inc VAT)
OEM: 71-7008, 70-3059, E17008, E3059, 70-3059R, 71-7644, E3059R, E17644
Triumph Cam Follower Tappet - 500/650/750cc Pre Unit and Unit Models - Exhaust and Inlet Single cam follower, sits in the tappet block and follows the...
 

fkchainsss415
£11.95 (£14.34 inc VAT)
OEM: 112045
415 Standard Classic Motorcycle 90R 1/2" x 3/16" Chain - Triple SSS - 120 Links Supplied with a connecting spring link. 90R 1/2" x 3/16" (P x W) standard...
+

pmp202H-B18
£69.95 (£83.94 inc VAT)
OEM: 70-9421, 70-3878, 70-6928, E9421, E3878, E6928
Triumph Unit Oil Pump - UK Made Dual plunger Triumph engine oil pump for 350cc, 500cc, 650cc and 750cc unit twins including: 3TA, 5TA, T90, T100, TR6,...
+

kick972-B4
£4.95 (£5.94 inc VAT)
OEM: 57-1441
Triumph T90/T100 350/500cc Kick Start Return Spring Fits all Triumph Twin Unit Construction 350/500cc Models from 1957-1974. OEM: 57-1441
+

fkpipe035
£0.95 (£1.14 inc VAT)
Breather / Overflow Hose - 3.5mm Bore, 6mm Diameter - Black Rubber Carburettor overflow or breather pipe - s uitable for low pressure uses only. OD: 6mm...
+

bolt1872-B13
£2.95 (£3.54 inc VAT)
OEM: 21-1872, S1872
Triumph Timing Plug / Sump Plate Drain Bolt - Unit Singles and Twins from 1968 Onwards Timing aperture plug - correct fitment on various models...
+

pump-gkt-3910
£0.75 (£0.90 inc VAT)
OEM: 71-3910, E13910
Triumph Oil Pump Gasket - Unit Twins - 350/500/650/750cc From 1963-83 Suitable for models with 4 valve oil pump. Can also be used on 2 valve oil pumps as...
+

plug5343-B13
£1.95 (£2.34 inc VAT)
OEM: 82-5343, F5343
Triumph Oil Tank Drain Plug - Unit Pre OIF Twins and Triples From 1963 Onwards Oil tank drain plug as used on pre OIF unit T100, T120, TR6, T150 models....
+

plug1112-B18
£4.95 (£5.94 inc VAT)
OEM: 57-1112, T1112
Triumph Gearbox Oil Drain and Level Plug - Unit 350/500/650cc Models Circa 1959-68 Correct fitment on 3TA, 5TA, T90, T100 models circa 1959-74 + 6T, T120...
+

wash0588
£0.45 (£0.54 inc VAT)
OEM: 68-0588, 71-4443, E14443
BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72 Rubber O ring seal for oil lines on A50 and A65 models from 1965-72. Also used between the...
+

rocker010-B4
£16.95 (£20.34 inc VAT)
OEM: 70-4610
Chrome Triumph Rocker Cover Caps - set of 4 Suitable for Triumph. Unit Triumph. Complete with washers. Thread diameter approx 1+3/16" (30mm) OEM: 70-4610
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.