.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.
.

Useful & Interesting







SHIPPING COSTS SHIPPING COSTS

Get rates

Engine & Transmission

Bestsellers
96 Per Page
Oil Pressure Release Valve Triumph T140 Stainless
valv570ss-B18
Oil Pressure Release Valve Triumph T140 Stainless
£39.95 (£47.94 inc VAT)
OEM: 71-3447, E5896, 70-5896
Oil Pressure Release Valve Fits Triumph T140 Bonneville motorcycle Can be used in some other models also Stainless Steel (Made in UK) OEM: 71-3447, E5896,...
+ −
67-3242, 29-3476
clplt321-B24
BSA A7, A10 Plunger Models - Clutch Friction Plates - Surflex
£13.95 (£16.74 inc VAT)
OEM: 67-3242, 29-3476
BSA A7, A10, B31, B33, C10L, C11G, C12 Plunger Models Surflex Clutch Friction Plates Surflex - 18-M-12 Inside Diameter: 92mm Outside Diameter: 144mm...
+ −
R11050, E6864, E6865, 70-6864, E6865 - Hepolite Piston Rings for Triumph T120 650cc Models - Circa 1959-75
rings037
Hepolite Piston Rings for Triumph T120 650cc Models - Circa 1959-75
£35.95 (£43.14 inc VAT)
OEM: R11050, E6864, E6865, 70-6864, E6865
Pair of Hepolite Piston Rings for Triumph T120 650cc models etc (1959-75). Supplied as 2 set of Hepolite Piston Rings. Bore Size : 71mm Standard, available...
Select Options
spann124
Triumph Sprocket Nut Spanner - 1+3/4
£15.95 (£19.14 inc VAT)
Tube spanner for Triumph 4 speed sprocket nut 1+3/4" Measures 44mm across inside flats. Sometimes it's the only way to get to the sprocket nut! OEM: 61-6061
+ −
Crankshaft Main Bearing Triumph, BSA Timing and Drive sides - OEM: 24-0724, 70-9974, 27-724, 24-724
bear019-F4
Crankshaft Main Bearing Triumph, BSA Timing and Drive sides
£23.95 (£28.74 inc VAT)
OEM: 24-0724, 70-9974, 27-724, 24-724
Crankshaft Bearing BSA C15/B40 T/S - 1967 onwards. C25/B25/B44 T/S and D/S - Roller Type - 1967 onwards. B31/B33/B34 D/S (1946-59), B50 T/S & D/S -...
+ −
71-2207
gkt-2207
BSA Rocker Box Gasket - Later OIF A50 and A65 Models - Circa 1971 Onwards
£2.95 (£3.54 inc VAT)
OEM: 712207, 71-2207
BSA Rocker Box Gasket - Later OIF A50 and A65 Models - Circa 1971 Onwards Rocker box cover gasket - correct fitment on A50 and A65 models with 5/16"...
+ −
Triumph T20 Tiger Cub Piston - 9.1 Compression Ratio - Various Models Circa 1959-68 - Gandini/GPM
pist3958
Triumph T20 Tiger Cub Piston - 9.1 Compression Ratio - Various Models Circa 1959-68 - Gandini/GPM
£119.95 (£143.94 inc VAT)
OEM: 70-3958, E3958, CP172
Triumph T20 Tiger Cub Piston - 9.1 Compression Ratio - Various Models Circa 1959-68 - Gandini/GPM Supplied as 1 piston, complete with rings, gudgeon pin...
Select Options
Heavy Duty Kickstart Lever - Triumph Pre Unit and Unit Models - Folding Type With Standard Bend
kick3632-S
Heavy Duty Kickstart Lever - Triumph Pre Unit and Unit Models - Folding Type With Standard Bend
£119.95 (£143.94 inc VAT)
OEM: 57-1270, T1270, 57-3632, T3632, 57-7018, T7018
Heavy Duty Kickstart Lever - Triumph Pre Unit and Unit Models - Folding Type With Standard Bend Heavy duty kickstart crank assembly suitable for use on...
+ −
42-8334, 42-8426 - BSA Oil Tank Filter - Pre Unit A, B and C Group Models - Stainless Steel
filt582-SS-B3
BSA Oil Tank Filter - Pre Unit A, B and C Group Models - Circa 1954-63
£23.95 (£28.74 inc VAT)
OEM: 42-8334, 42-8426
BSA Oil Tank Filter - Pre Unit A, B and C Group Models - Circa 1954-63 Oil tank filter and drain plug. Correct fitment for BSA A7, A10, B31 and B33...
 
Options
57-1503, T1503 - Triumph T20 Tiger Cub Clutch Friction/Driving Plate - 1959 Onwards
clplt327S-B24
Triumph T20 Tiger Cub Clutch Friction/Driving Plate - 1959 Onwards
£14.95 (£17.94 inc VAT)
OEM: T1503, 57-1503
Triumph T20 Tiger Cub Clutch Friction/Driving Plate - 1959 Onwards Clutch driving plate complete with linings as used on l ater T20 Tiger Cub models...
 
Options
Oil Sump Filter Gauze - Triumph 350cc + 500cc Unit Twins
filt840m-B3
Oil Sump Filter Gauze - Triumph 350cc + 500cc Unit Twins - OEM: 70-3722
£10.95 (£13.14 inc VAT)
OEM: 70-3722, E3722
Oil Sump Filter Gauze - Triumph 350cc + 500cc Unit Twins Conical type, fits 350/500 unit construction models OEM: 70-3722, E3722
+ −
Triumph Tappet Guide Block - Inlet - 70-9352
tapp9352-B13
Triumph Tappet Guide Block - Inlet - 70-9352
£21.95 (£26.34 inc VAT)
OEM: 70-9352
Triumph 500cc, 650cc, 750cc, T100, T120, T140 inlet tappet guide block. OEM: 70-9352
+ −
70-3114, E3114 - Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73
stud3114-B19
Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73
£2.95 (£3.54 inc VAT)
OEM: 70-3114, E3114
Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73 Drive side crankshaft to alternator rotor stud - later pre unit...
+ −
57-2238, T2238 - Triumph Kickstart Oil Seal Cover - Unit 350/500cc Twins Circa 1967-74
seal2238-B13
Triumph Kickstart Oil Seal Cover - Unit 350/500cc Twins Circa 1967-74
£2.95 (£3.54 inc VAT)
OEM: 57-2238, T2238
Triumph Kickstart Oil Seal Cover - Unit 350/500cc Twins Circa 1967-74 Kickstart shaft to gearbox outer cover oil seal cupped housing. Correct fitment on...
+ −
57-0024, T24 - Triumph Kickstart Shaft 350/500/650cc Pre Unit + Unit Singles and Twins and T150 Models Circa 1946-74
kick0024-B4
Triumph Kickstart Shaft 350/500/650cc Pre Unit + Unit Singles and Twins and T150 Models Circa 1946-74
£21.95 (£26.34 inc VAT)
OEM: 57-0024, T24
Triumph Kickstart Shaft 350/500/650cc Pre Unit + Unit Singles and Twins and T150 Models Circa 1946-74 Correct fitment on various models including pre...
+ −
82-9659, F9659, 68-8368 - Triumph/BSA Oil Tank Filler Cap with Dipstick - Unit 500/650cc Twins + B25, B44 and T150 Models
oilcap9659-B4
Triumph/BSA Oil Tank Filler Cap with Dipstick - Unit 500/650cc Twins + B25, B44 and T150 Models
£28.95 (£34.74 inc VAT)
OEM: 82-9659, F9659, 68-8368
Triumph/BSA Oil Tank Filler Cap with Dipstick - Unit 500/650cc Twins + B25, B44 and T150 Models Complete cap and dipstick assembly - 2" chrome plated...
+ −
12302-7, 018650, 01-8650 - Chaincase Metal Band - AJS / Matchless Singles and Twins Circa 1946-61
cc-band8650
Chaincase Metal Band - AJS / Matchless Singles and Twins Circa 1946-61
£18.95 (£22.74 inc VAT)
OEM: 12302-7, 018650, 01-8650
Chaincase Metal Band - AJS / Matchless Singles and Twins Circa 1946-61 Alloy chaincase sealing band as used on many AJS and Matchless 350/500cc singles...
+ −
60-4255, D208-5, D4255 - Triumph Brass Patent Plate Hammer Drive Rivet / Screw Set
screw4255-brass-B13
Triumph Brass Patent Plate Hammer Drive Rivet / Screw Set
£1.45 (£1.74 inc VAT)
OEM: 60-4255, D208-5, D4255
Triumph Brass Patent Plate Hammer Drive Rivet / Screw Set Set of three brass hammer drive rivets to secure the timing cover triangular name plate as used...
+ −
57-3757, 57-1750, T3757, T1750 - Triumph Gear Lever - Unit Models T120, TR6, TR7, T140 and T160 Models - 1963-75
gear054-B8
Triumph Gear Lever - Unit Models T120, TR6, TR7, T140 and T160 Models - 1963-75
£25.95 (£31.14 inc VAT)
OEM: 57-3757, 57-1750
Triumph Gear Lever - Unit Models T120, TR6, TR7, T140 and T160 Models - 1963-75 Splined shaft diameter: 3/4" (19mm) Available as standard quality or...
 
Options
BSA A7, A10 Engine Oil Feed Pipes - OEM: 42-8346, 42-8347
pipe551-B3
BSA A7, A10 Engine Oil Feed Pipes - OEM: 42-8346, 42-8347
£39.95 (£47.94 inc VAT)
OEM: 42-8346, 42-8347
BSA A7, A10 armoured oil feed pipes Exact replica of genuine pipes Comes as 2 pipes, approx 17" and 18" long, ready to fit OEM: 42-8346, 42-8347
+ −
BSA A7, A10, B31, B33 Rocker Oil Feed Pipe - OEM: 42-0048, 42-48
pipe248
BSA A7, A10, B31, B33 Rocker Oil Feed Pipe
£21.95 (£26.34 inc VAT)
OEM: 42-0048, 42-48
BSA A7, A10 Rocker oil feed pipe complete. Ariel Huntmaster 650cc Also BSA B31, B33 swing arm models pipe diameter: 3/16" OEM: 42-0048, 42-48
+ −
pist037
Hepolite Pistons for Triumph T120 650cc
£82.95 (£99.54 inc VAT)
OEM: 70-6868, E6868, 17844
Pair of Hepolite Pistons for Triumph T120 650cc models etc (1959-75). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore...
Select Options
Triumph Push Rod Seal - Bottom - 5TA, 3TA, T100A - OEM 70-3758, E3758 - OEM 70-3758, E3758
seal3758
Triumph Push Rod Seal - Bottom - 5TA, 3TA, T100A - OEM 70-3758, E3758
£1.25 (£1.50 inc VAT)
OEM: 70-3758, E3758
Triumph Push Rod Seal - Bottom To fit 5TA, 3TA, T100A models from 1957-1963 OEM 70-3758, E3758
+ −
Triumph T120, TR6 Rocker Cover Inspection Cap Spring Clip - OEM: 70-4609, E4609
clip425-B18
Triumph T120, TR6 Rocker Cover Inspection Cap Spring Clip
£1.95 (£2.34 inc VAT)
OEM: 70-4609, E4609
Triumph T120, TR6 models Rocker cover inspection Cap Spring Retaining Clip OEM: 70-4609, E4609
+ −
nut262-B18
Triumph Crankshaft Sludge Trap Plug - 650cc - 70-3905, E3905
£4.95 (£5.94 inc VAT)
OEM: 70-3905, E3905
Triumph T120/T110 650cc etc (-1968) Hexagonal crank Sludge Trap plug, CEI threads. OEM: 70-3905, E3905
+ −
57-0057, T57, 57-4700, T4700 - Triumph Gear Change Outer Spindle Bush - Pre Unit and Unit Models Circa 1939-75
gbox0057W-B4
Triumph Gear Change Outer Spindle Bush - Pre Unit and Unit Models Circa 1939-75
£4.95 (£5.94 inc VAT)
OEM: 57-4700, T4700, 57-0057, T57
Triumph Gear Change Outer Spindle Bush - Pre Unit and Unit Models Circa 1939-75 Reproduction gearchange spindle bush with a flat lip with four grooves....
+ −
OEM: 70-3732
nut3732-B13
Oil Pump Nut - 70-3732
£0.95 (£1.14 inc VAT)
OEM: 70-3732
Oil Pump Nut - 70-3732 Triumph Engine Oil Pump Nut, to secure oil pump to engine stud. OEM: 70-3732
+ −
57-1644, T1644 - Triumph Clutch Cable Abutment - Earlier Unit Twins from 1963-67
clutch1644-B23
Triumph Clutch Cable Abutment - Earlier Unit Twins from 1963-67
£4.95 (£5.94 inc VAT)
OEM: 57-1644, T1644
Triumph Clutch Cable Abutment - Earlier Unit Twins from 1963-67 Early BSF type with hollow body and no internal threads. Correct fitment on 6T, T120 and...
+ −
OEM: 29-3857, 57-0665, 70-8014, T665, E8014
bear425-F4
High Gear Bearing - BSA 250cc Singles, Triumph 350/500 Unit Twins + TR25/W, Royal Enfield 350/500/750cc
£8.95 (£10.74 inc VAT)
OEM: 29-3857, 57-0665, 70-8014, T665, E8014
High Gear Bearing - BSA 250cc Singles, Triumph 350/500 Unit Twins + TR25/W, Royal Enfield 350/500/750cc Suitable for the following models: BSA 250cc...
+ −
66-3813 - BSA Clutch Sleeve Cork Ring - M20 & M21 Single Spring Clutch
clutch3813-B18
BSA Clutch Sleeve Cork Ring - M20 & M21 Single Spring Clutch
£6.45 (£7.74 inc VAT)
OEM: 66-3813
BSA Clutch Sleeve Cork Ring - M20 & M21 Single Spring Clutch Fits behind the clutch on the shaft - M20/M21 single spring clutch models. OD: 1+1/4"...
+ −
70-3724 - Triumph Oil Sump Filter Retaining Spring - 350/500cc Models
spring3724-B13
Triumph Oil Sump Filter Retaining Spring - 350/500cc Models
£1.75 (£2.10 inc VAT)
OEM: 70-3724, E3724
Triumph Oil Sump Filter Retaining Spring - 350/500cc Models OD: 7/16" (10.6mm) Length uncompressed: 7/16" (10.8mm) OEM: 70-3724, E3724
+ −
70-8782, 70-7563, 70-7562, 71-3896, 68-0610 - Triumph/BSA O Ring
wash8782
Triumph/BSA 'O' Ring - Inspection Plug, Tappet Guide Block + Push Rod Tube
£0.95 (£1.14 inc VAT)
OEM: 70-8782, 70-7563, 70-7562, E8782, E7562, E7562, 71-3896, 68-0610
Triumph/BSA 'O' Ring - Inspection Plug, Tappet Guide Block + Push Rod Tube Various uses on many unit BSA and Triumph single and twin models from 1968...
+ −
57-0413, T413 - Triumph Clutch Operating Arm Adjusting Pin With Ball - Pre Unit 350/500/650cc Models
clutch0413-B23
Triumph Clutch Push Rod Adjuster Pin With Ball - Pre Unit 350/500/650cc Models
£4.45 (£5.34 inc VAT)
OEM: 57-0413, T413
Triumph Clutch Operating Arm Adjusting Pin With Ball - Pre Unit 350/500/650cc Models Clutch lever adjusting pin with captive ball bearing - correct...
+ −
57-0361, T361 - Triumph Gearbox Level Plug Bolt - Unit 350/500/650cc Models Circa 1959-68 + Knee Grip Mounting Plates
bolt0361-B18
Triumph Gearbox Level Plug Bolt - Unit 350/500/650cc Models Circa 1959-68 + Knee Grip Mounting Plates
£1.75 (£2.10 inc VAT)
OEM: 57-0361, T361
Triumph Gearbox Level Plug Bolt - Unit 350/500/650cc Models Circa 1959-68 + Knee Grip Mounting Plates Level plug bolts for use with drain plug 57-1112....
+ −
40-3257 57-2685, T2685 - BSA/Triumph Kickstart Pinion Tab Washer - Unit Singles Circa 1965-71
tab-wash3257-B4
BSA/Triumph Kickstart Pinion Tab Washer - Unit Singles Circa 1965-71
£1.25 (£1.50 inc VAT)
OEM: 40-3257 57-2685, T2685
BSA/Triumph Kickstart Pinion Tab Washer - Unit Singles Circa 1965-71 Correct fitment on BSA B50, B44, B40, B25 and C25 models + Triumph TR25 models. ID:...
+ −
520 Regina Classic Motorcycle Chain - 135RESR 5/8" x 1/4" - 96 to 120 Links
regina520
520 Regina Classic Motorcycle Chain - 135RESR 5/8" x 1/4" - 96 to 120 Links
£49.95 (£59.94 inc VAT)
OEM: 110054
520 Regina Classic Motorcycle Chain - 135RESR 5/8" x 1/4"  - 96 to 120 Links Supplied with a connecting spring link. 135RESR 5/8" x 1/4" (P x W)...
Select Options
Stainless Steel Allen Screw Kit - Triumph TR6, T120, T140
fkscrew221-B9
Stainless Steel Allen Screw Kit - Triumph TR6, T120, T140
£13.95 (£16.74 inc VAT)
Stainless Steel Allen Screw Kit - Triumph TR6, T120, T140 Triumph 650/750 Unit construction twins (1968-1983) Complete Set, includes allen keys. Stainless...
+ −
71-1070
seal087
O RING - BSA, Triumph Rocket 3, Trident (cap seal)
£1.25 (£1.50 inc VAT)
OEM: 71-1070
O RING - BSA and Triumph BSA, Triumph Rocket 3, Trident (cap seal) OEM: 71-1070
+ −
bolt742-B14
Triumph 9 Piece Cylinder Head Bolt Set - 650cc
£23.95 (£28.74 inc VAT)
Triumph High Tensile 9 piece Cylinder Head Bolt Set for TR6/T120 Unit models. Suit most later Triumgh twin 650cc 1x 70-4771 Centre head bolt - 5/16" x 3" x...
+ −
57-1040
screw1040-B23
Clutch centre Triumph - Countersunk Screw - 57-1040
£0.95 (£1.14 inc VAT)
OEM: T1040, 57-1040
Triumph Clutch centre - Countersunk Screw - 57-1040 Screws for the clutch hub centre front plate OEM: T1040, 57-1040
+ −
70-2412, E2412
nut2412-B14
Fork Leg & Cylinder Base Nut - Triumph - 70-2412
£1.45 (£1.74 inc VAT)
OEM: 70-2412, E2412
Fork Leg & Cylinder Base Nut - Triumph - 70-2412 For various Triumphs Premium Quality - Made in England OEM: 70-2412, E2412
+ −
57-2239 - Gearbox Kickstart Oil Seal Triumph
seal534
Gearbox Kickstart Oil Seal Triumph - 57-2239
£1.75 (£2.10 inc VAT)
OEM: 57-2239
Gearbox Kickstart Oil Seal Triumph - 57-2239 Kickstart shaft to cover Oil seal for Triumph T90/T100/TR5T models (1967-74). OEM: 57-2239
+ −
57-0989, T989 - Triumph Crankcase Timing Side and Gearbox Dowel
dowel0989-B18
Triumph Crankcase Timing Side and Gearbox Dowel - Various Models
£1.55 (£1.86 inc VAT)
OEM: 57-0989, T989
Triumph Crankcase Timing Side and Gearbox Dowel - Various Models Hollow dowel as used on Triumph crankcases, gearbox cases, chain cases etc. Also some...
+ −
57-1157, T1157, 40-0224, 40-224 - Kickstart Stop Plate - Triumph T15, T20 + 350/500cc Unit Models Circa 1958-73 + BSA C15 models
kick1157-B4
Kickstart Stop Plate - Triumph T15, T20 + 350/500cc Unit Models Circa 1958-73 + BSA C15 and B40 Models
£1.95 (£2.34 inc VAT)
OEM: 57-1157, T1157, 40-0224, 40-224
Kickstart Stop Plate - Triumph T15, T20 + 350/500cc Unit Models Circa 1958-73 + BSA C15 and B40 Models Correct fitment on Triumph T15 Terrier, T20 Tiger...
+ −
clutch3274
BSA 12" Clutch Push Rod - 4 Spring Clutch - A10 Super Rocket and RGS Models + Conversions
£8.95 (£10.74 inc VAT)
OEM: 42-3274
BSA 12" Clutch Push Rod - 4 Spring Clutch - A10 Super Rocket and RGS Models + Conversions Hardened steel clutch operating rod - correct fitment on A10 SR...
+ −
G-40-6, G-40-12 - Burman Clutch Friction Plates - AJS / Matchless Singles and Twins Circa 1951-56
clplt330P-B24
Burman Clutch Friction Plates - AJS / Matchless Singles and Twins Circa 1951-56
£9.45 (£11.34 inc VAT)
OEM: G-40-6, G-40-12
Burman Clutch Friction Plates - AJS / Matchless Singles and Twins Circa 1951-56 Clutch driving / friction plate with inserts - four or five required...
+ −
fkgk820By
Triumph - 500cc Tiger 100, (T100 R&C) Engine Gasket Set 1965-69
£33.95 (£40.74 inc VAT)
Triumph Motorcycle - 500cc Tiger 100, (T100 R&C) Engine Gasket Set 1965-69
+ −
520 Standard Classic Motorcycle 135RESR 5/8" x 1/4" Chain - Triple SSS - 102 to 130 Links
fkchainsss520
520 Standard Classic Motorcycle 135RESR 5/8" x 1/4" Chain - Triple SSS - 102 to 130 Links
£17.95 (£21.54 inc VAT)
OEM: 110054
520 Standard Classic Motorcycle 135RESR 5/8" x 1/4" Chain - Triple SSS - 102 to 130 Links Supplied with a connecting spring link. 135RESR 5/8" x 1/4"...
Select Options
19-9217, 19-2225, 06-0627, 60-0637, 99-9994, E637, E627
box078-G15
Speedometer Gearbox 15:12 - BSA, Norton, Triumph 1966 onwards
£46.95 (£56.34 inc VAT)
OEM: 19-9217, 19-2225, 06-0627, 60-0637, 99-9994, E637, E627
Speedometer Gearbox, Ratio 15:12 Suit Models fitted with Magnetic type speedo after 1966. Wheel spindle hole: 3/4" (19mm) Gearbox drive hole: 2"...
+ −
BSA A7, A10, Small Journal Big End Bearing Shells - Standard + Undersize Options - 67-0320, 67-0341, 67-0242, 67-242, B2024LC
bigend0320-B3
BSA A7, A10, Small Journal Big End Bearing Shells - Standard + Undersize Options
£29.95 (£35.94 inc VAT)
OEM: B2024LC, 67-0320, 67-0341, 67-0242, 67-242
BSA A7, A10, Small Journal Big End Bearing Shells - Standard + Undersize Options 2 pairs of small journal big end shells for BSA A7, A7SS, A10, A10SR,...
Select Options
Oil Seal Set - Engine and Gearbox - Triumph 3TA, 5TA, T100 1957-63 - OEM: E3833, 70-3833, E3876, 70-3876, T1478, 57-1478
seal364-B7
Oil Seal Set - Engine and Gearbox - Triumph 3TA, 5TA, T100 1957-63
£6.95 (£8.34 inc VAT)
OEM: E3833, 70-3833, E3876, 70-3876, T1478, 57-1478
Oil Seal Set - Engine and Gearbox To suit Triumph 3TA, 5TA, T100 distributor models 1957-63 Contains: Clutch back plate seal, Crank drive side seal, Gearbox...
+ −
BSA A7, A10 Rocker Oil Feed Bolt - OEM: 65-0317
bolt553-B18
BSA A7, A10 Rocker Oil Feed Bolt
£3.45 (£4.14 inc VAT)
OEM: 65-0317
BSA A7, A10 Rocker spindle oil feed bolt OEM: 65-0317
Select Options
70-9492, E9492 - Triumph Crankshaft Sludge Trap Plug - Unit 300/500cc Twins Circa 1959-74
nut263-B18
Triumph Crankshaft Sludge Trap Plug - Unit 300/500cc Twins Circa 1959-74
£5.95 (£7.14 inc VAT)
OEM: 70-9492, E9492
Triumph Crankshaft Sludge Trap Plug - Unit 300/500cc Twins Circa 1959-74 Hex oil tube plug - correct fitment on 3TA, 5TA and T100 models from 1959...
+ −
BSA Sump Plate - A7, A10, A50, A65 Models - OEM: 67-1285, 67-1286
sump221-B3
BSA Sump Plate - A7, A10, A50, A65 Models
£26.95 (£32.34 inc VAT)
OEM: 67-1285, 67-1286
BSA Sump Plate - A7, A10, A50, A65 Models Finned alloy sump plate with magnetic drain plug. Supplied with gasket, magnetic sump plug and washer. Sump...
+ −
Valve Spring Set - Triumph 350/500cc Unit Models - 1966 Onwards - OEM: 70-4011, 70-5946, E4011, E5946
valv256-B17
Valve Spring Set - Triumph 350/500cc Unit Models - 1966 Onwards
£15.95 (£19.14 inc VAT)
OEM: 70-4011, 70-5946, E4011
Valve Spring Set - Triumph 350/500cc Unit Models - 1966 Onwards Correct fitment on 3TA, T90, 5TA and T100 models circa 1966-73. OEM: 70-4011,...
+ −
gkt607
BSA M20, M21 etc - Inner Gearbox Gasket - 66-3069
£2.45 (£2.94 inc VAT)
OEM: 66-3069
BSA M20, M21 etc - Inner Gearbox Gasket OEM: 66-3069
+ −
clutch553-B23
10 Clutch Rollers - Triumph/BSA/Villiers - 57-2719, 42-3206
£1.95 (£2.34 inc VAT)
OEM: 57-2719, E9777
ROLLERS - Triumph/BSA/Villiers - 57-2719, 42-3206 Clutch Rollers for BSA and Triumph Unit singles. Also fits Villiers 9E,10E and 250cc A series...
+ −
70-9488
piston9488
Harris Pistons for Triumph T120/TR6 650cc - 70-9488
£99.95 (£119.94 inc VAT)
OEM: 70-9488, 70-6868
Harris Pistons for Triumph T120/TR6 650cc - 70-9488 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin, Ring...
Select Options
wash2521-B13
BSA Engine Mainshaft Lock Washer - B31, A10, A7
£1.25 (£1.50 inc VAT)
OEM: 65-2521
BSA Engine Mainshaft Lock Washer - B31, A10, A7 ID for shaft size 7/8" OD: 1+9/16" Made in England OEM: 65-2521
+ −
BSA Kickstart Lever - Unit Singles + A Group Models - Heavy Duty Folding Type With Wide Bend - 57-2764
kick2764-T
BSA Trials Kickstart Lever - Unit Singles + A Group Models - Heavy Duty Folding Type With Wide Bend
£119.95 (£143.94 inc VAT)
OEM: 57-2764
BSA Trials Kickstart Lever - Unit Singles + A Group Models - Heavy Duty Folding Type With Wide Bend Heavy duty kickstart crank assembly for use on...
+ −
70-3108, E3108 - Triumph Pre Unit Engine Sprocket - 500/650cc Models Circa 1953-61
e-sprock3108-B9
Triumph Pre Unit Engine Sprocket - 500/650cc Models Circa 1953-61
£24.95 (£29.94 inc VAT)
OEM: 70-3108, E3108
Triumph Pre Unit Engine Sprocket - 500/650cc Models Circa 1953-61 Correct fitment on 5T, T100, TR5, T110, T120, TR6 and 6T models. Number of Teeth: 19T,...
Select Options
70-3300, E3300 - Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82
wash3300-B13
Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82
£4.95 (£5.94 inc VAT)
OEM: 70-3300, E3300
Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82 Locates between the right hand main bearing and timing...
+ −
70-2982, E2982 - Triumph Rocker Box Corner Bolt - Unit Alloy Head 650cc Models Circa 1963-68
bolt2982-B19
Triumph Rocker Box Corner Bolt - Pre Unit and Unit Alloy Head 500/650cc Models Circa 1952-68
£2.45 (£2.94 inc VAT)
OEM: 70-2982, E2982
Triumph Rocker Box Corner Bolt - Pre Unit and Unit Alloy Head 500/650cc Models Circa 1952-68 Correct fitment on pre unit TR5 and T100 models circa...
+ −
57-1742, T1742 - Triumph Clutch Spring - Heavy Duty Type For T20 Tiger Cub Models From 1964 Onwards
spr1742-B24
Triumph Clutch Spring - Heavy Duty Type For T20 Tiger Cub Models From 1964 Onwards
£1.95 (£2.34 inc VAT)
OEM: 57-1742, T1742
Triumph Clutch Spring - Heavy Duty Type For T20 Tiger Cub Models From 1964 Onwards Correct fitment on T20, T20SS, T20SH and T20SM models from 1964...
+ −
97-1168, H1168 - Triumph Engine Oil Seal - Triumph Pre Unit Twins - Circa 1957-62
seal137-E-C13
Triumph Engine Oil Seal - Triumph Pre Unit Twins - Circa 1957-62
£2.25 (£2.70 inc VAT)
OEM: 97-1168, H1168
Triumph Engine Oil Seal - Triumph Pre Unit Twins - Circa 1957-62 Crankshaft drive side oil seal. Also fits Tiger Cub T20 final drive. OD: 1+5/8"...
+ −
Triumph - 650cc Trophy TR6, Bonneville, T120 Engine Gasket Set 1969-70
fkgk826
Triumph - 650cc Trophy TR6, Bonneville, T120 Engine Gasket Set 1969-70
£42.95 (£51.54 inc VAT)
OEM: E3730, 70-3730, E4919, 70-4919, E7563, 70-7563, E1670, 70-1670, E-3751, 70-3751, E9348, 70-9348, E6309, 70-6309, E4547, 70-4547, E7310, 70-7310, E5049, 70-5049, T1770, 57-1770, E3832, 70-3832
Triumph - 650cc Trophy TR6, Bonneville, T120 Engine Gasket Set 1969-70 9 stud head. Set contains the following gaskets: Rocker Box x2, Cylinder Head,...
+ −
Triumph Clutch Chainwheel - 5TA, T100, T110, 6T, T120, TR6 From 1960-74 - OEM: 57-1570, T1570
clutch468-B20
Triumph Clutch Chainwheel - 5TA, T100, T110, 6T, T120, TR6 From 1960-74
£52.95 (£63.54 inc VAT)
OEM: 57-1570
Triumph Clutch Chainwheel - 5TA, T100, T110, 6T, T120, TR6 From 1960-74 Number of Teeth: 58T Chain Type: Duplex OEM: 57-1570, T1570
+ −
rings035
Hepolite Piston Rings for Triumph T140/TR7 750cc
£35.95 (£43.14 inc VAT)
OEM: R26490
Pair of Hepolite Piston Rings for Triumph T140/TR7 750cc models (1972-). Supplied as 2 set of Hepolite Piston rings. Bore Size : 76mm Standard, available...
Select Options
Crankshaft Main Bearing Triumph, BSA - 70-1591, E1591, 67-1240
bear347-F4
BSA/Triumph Crankshaft Main Bearing
£31.95 (£38.34 inc VAT)
OEM: 70-1591, E1591, 67-1240
BSA/Triumph Crankshaft Main Bearing BSA A75 Rocket 3 D/S Triumph T120 Crankshaft T/S (Imperial), T150/T160 Trident Crankshaft D/S (1969-75). BSA A50, A65...
Select Options
nut569-B18
Crankshaft Alternator Nut - BSA - 29-2023
£6.95 (£8.34 inc VAT)
OEM: 29-2023, 29-2053
Crankshaft Alternator Nut for BSA C11/C15/B31/B44/B50/A50/A65 Crankshaft Alternator Nut for BSA C11/C15/B31/B44/B50/A50/A65 models. 5/8" CEI thread....
+ −
OEM: 40-0683, 70-4747
pillarbolt513-B19
Contact Breaker Pillar Bolt - 70-4747
£1.95 (£2.34 inc VAT)
OEM: 40-0683, 70-4747
Contact breaker pillar bolt. To secure the contact points set on side points models, also secures the points cover. Fits BSA C15/B44/B50 and Triumph...
+ −
bear0670-F4
Crankshaft Main Bearing BSA A7 and BSA A10, Ariel FH - 67-0670
£24.95 (£29.94 inc VAT)
OEM: 67-0670
BSA A7 and BSA A10 Crankshaft bearing Drive Side. To suit BSA models including Shooting Star, Gold Flash, Rocket, Road Rocket, R130L. Also fits Ariel 650cc...
+ −
40-3085, 57-1167 - Folding Kickstart Locating Spring - Triumph and BSA
kick1167-B4
Triumph/BSA - Folding Kickstart Pedal Locating Spring - Various Models
£0.85 (£1.02 inc VAT)
OEM: 40-3085, 57-1167, T1167
Triumph/BSA - Folding Kickstart Pedal Locating Spring - Various Models Fits many BSA and Triumph singles and twins -  B25, B40, B44, B50, T20, T90, A50,...
+ −
Triumph Inlet Camshaft - 70-3134, 71-1063, 70-4819
camshaft3134-B7
Triumph Inlet Camshaft - Unit 650cc Models from 1963-72 + Pre Unit 650cc to 1962
£69.95 (£83.94 inc VAT)
OEM: 70-3134, E3134, 71-1063, E11063, 70-4819, E4819
Triumph Inlet Camshaft - Unit 650cc Models from 1963-72 + Pre Unit 650cc to 1962 To suit many Triumph 650cc models - T120, T120R, TR6 etc Nitrided...
Select Options
40-0111, 40-111 - BSA Sump Plate Gasket - C15 and B40 Models Circa 1959-65
sumpgkt0111
BSA Sump Plate Gasket - C15 and B40 Models Circa 1959-65
£1.45 (£1.74 inc VAT)
OEM: 40-0111, 40-111
BSA Sump Plate Gasket - C15 and B40 Models Circa 1959-65 Usually two gaskets required, one each side of the gauze filter. Made in England OEM:...
+ −
40-0970, 70-7998, E7998, 16945 - Hepolite Piston - BSA/Triumph Unit Singles - B25, C25, TR25 Models Circa 1967-71
pist-16945
Hepolite Piston - BSA/Triumph Unit Singles - B25, C25, TR25 Models Circa 1967-71
£39.95 (£47.94 inc VAT)
OEM: 40-0970, 70-7998, E7998, 16945
Hepolite Piston - BSA/Triumph Unit Singles - B25, C25, TR25 Models Circa 1967-71 Suitable for 250cc singles with the square alloy barrel - B25, C25 and...
Select Options
kick1281-B4
Triumph/BSA Kickstart Pawl - T20 Tiger Cub Models Circa 1955-67 + C15 and B40 Models Circa 1959-64
£2.95 (£3.54 inc VAT)
OEM: 57-1281, 40-3025, T1281
Triumph/BSA Kickstart Pawl - T20 Tiger Cub Models Circa 1955-67 + C15 and B40 Models Circa 1959-64 Kickstarter spindle pawl - correct fitment on T20...
+ −
70-3391, E3391, 40-0180, 40-180 - Triumph/BSA Push Rod Tube Seal - Bottom - T20 Tiger Cub + C15 Models Circa 1954-67
seal3391
Triumph/BSA Push Rod Tube Seal - Bottom - T20 Tiger Cub + C15 Models Circa 1954-67
£1.95 (£2.34 inc VAT)
OEM: 70-3391, E3391, 40-0180, 40-180
Triumph/BSA Push Rod Tube Seal - Bottom - T20 Tiger Cub + C15 Models Circa 1954-67 Lower push rod tube oil joint washer as used on all T15 and T20 models...
+ −
Triumph - 650cc T110, TR6 S/S Engine Gasket Set 1956-62
fkgk812
Triumph - 650cc T110, TR6 S/S Engine Gasket Set 1956-62
£34.95 (£41.94 inc VAT)
Triumph Motorcycle - 650cc T110, TR6 S/S Engine Gasket Set 1956-62
+ −
57-1918
sprock425-B10
Triumph TR6, T120, T150, 4 spd, Gearbox Sprocket 19T - 57-1918
£27.95 (£33.54 inc VAT)
OEM: 57-1918
Triumph TR6, T120 etc 1963-74, T150 1969-72 4 speed Gearbox Sprocket 19T Chain Pitch: 5/8" x 3/8" (530) Number of Teeth: 1 OEM: 57-1918, T1918
+ −
Save 33%
Triumph Tappet Guide Block - Exhaust - 70-9353
tapp9353-B13
Triumph Tappet Guide Block - Exhaust - 70-9353
£29.95 £19.95 (£23.94 inc VAT)
OEM: 70-9353
Triumph 500cc, 650cc, 750cc, T100, T120, T140 exhaust tappet guide block. OEM: 70-9353
+ −
T1478, 57-1478 - Gearbox Final Drive OIL SEAL - Triumph
seal255
Gearbox Final Drive OIL SEAL - Triumph - 57-1478
£2.45 (£2.94 inc VAT)
OEM: T1478, 57-1478
Gearbox Final Drive OIL SEAL - Triumph - 57-1478 Gearbox High gear Oil seal for Triumph 3TA/5TA/T90/T100 350/500cc (1957-72), T100/TR5T 500cc (1972-74)...
+ −
OEM: 70-2226, E2226
gask2226
Dynamo Gasket - Cork - 70-2226
£0.95
OEM: 70-2226, E2226
Dynamo Gasket - Cork - 70-2226 Cork gasket between dynamo and timing gear case OEM: 70-2226, E2226
+ −
57-3660, T3660, T44, 68-98 - Triumph/BSA 4 Speed Gearbox Camplate Index Plunger
gearbox3660-B13
Triumph/BSA 4 Speed Gearbox Camplate Index Plunger - Pre-Unit & Unit Models
£8.95 (£10.74 inc VAT)
OEM: 57-3660, T3660, T44, 68-0098, 68-98, 57-0260 57-4308
Triumph/BSA 4 Speed Gearbox Camplate Index Plunger - Pre-Unit & Unit Models Correct fitment for BSA A50 & A65 models + 650/750cc Triumph Unit...
+ −
70-2962, E2962 - Triumph - Inlet Manifold To Carburettor Stud - 500/650cc Twins from 1952-69
stud2962-B13
Triumph - Inlet Manifold To Carburettor Stud - 500/650cc Twins from 1952-69
£1.95 (£2.34 inc VAT)
OEM: 70-2962, E2962
Triumph - Inlet Manifold To Carburettor Stud - 500/650cc Twins from 1952-69 Length: 1+1/4" (32mm) Diameter: 5/16" (7.7mm) BSW/CEI threads OEM:...
+ −
14-0702 - Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards
nut0702-B14
Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards
£1.45 (£1.74 inc VAT)
OEM: 14-0702
Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...
+ −
67-0685, 67-685 - BSA Camshaft Pinion Tab Washer - A7, A10, A50 and A65 Models
tab-0685-B18
BSA Camshaft Pinion Tab Washer - A7 and A10 Models Circa 1947-62 + All A50 and A65 Models
£0.95 (£1.14 inc VAT)
OEM: 67-0685, 67-685
BSA Camshaft Pinion Tab Washer - A7, A10, A50 and A65 Models Camshaft pinion lockwasher - correct fitment on A7 and A10 models circa 1947-62. Also used...
+ −
70-8896, E8896 - Triumph/BSA Timing/Tacho Drive Plug Alloy Washer - Unit Singles and Twins From 1968 Onwards
wash8896
Triumph/BSA Timing/Tacho Drive Plug Alloy Washer - Unit Singles and Twins From 1968 Onwards
£0.45 (£0.54 inc VAT)
OEM: 70-8896, E8896
Triumph/BSA Timing/Tacho Drive Plug Alloy Washer - Unit Singles and Twins From 1968 Onwards Crankcase timing aperture plug and/or tacho drive plug alloy...
+ −
70-2288, E2288 - Triumph 3/8" Serrated Lock Washer - T140 Brake Hose / Flywheel + Various Uses
wash2288
Triumph 3/8" Serrated Lock Washer - T140 Brake Hose / Flywheel + Various Uses
£0.35 (£0.42 inc VAT)
OEM: 70-2288, E2288
Triumph 3/8" Serrated Lock Washer - T140 Brake Hose / Flywheel + Various Uses Shakeproof serrated lock washer as used on many pre unit and unit Triumph...
+ −
70-3302, E3302, 75-0214, 75-214, S21/91 - Triumph / BSA - 1/4" Thin Plain Washer - Various Uses on Unit Models
wash3302
Triumph / BSA - 1/4" Thin Plain Washer - Various Uses on Unit Models
£0.25 (£0.30 inc VAT)
OEM: 70-3302, E3302, 75-0214, 75-214, S21/91
Triumph / BSA - 1/4" Thin Plain Washer - Various Uses on Unit Models As used on various unit models - rocker box studs, engine shields + universal use as...
+ −
21-1871, S1871 - Triumph Tacho Drive Blanking Plug - 650/750cc Twins From 1969 Onwards - LH Thread
plug1871-B13
Triumph Tacho Drive Blanking Plug - 650/750cc Twins From 1969 Onwards - LH Thread
£2.95 (£3.54 inc VAT)
OEM: 21-1871, S1871
Triumph Tacho Drive Blanking Plug - 650/750cc Twins From 1969 Onwards - LH Thread Screw that plugs the hole in the drive side crankcase when a tachometer...
+ −
fkgk320C
BSA - 650cc A10 Golden Flash (Cu Gkt) Engine Gasket Set 1950-63
£44.95 (£53.94 inc VAT)
BSA Motorcycle - 650cc A10 Golden Flash (Copper Head Gasket) Engine Gasket Set 1950-63
+ −
57-4435, T4435 - Triumph / BSA Complete Clutch Centre / Shock Absorber Assembly - Unit Twins - Three Spring Clutch
clutch4435-B23
Triumph / BSA Complete Clutch Centre / Shock Absorber Assembly - Unit Twins - Three Spring Clutch
£119.95 (£143.94 inc VAT)
OEM: 57-4435, T4435
Triumph / BSA Complete Clutch Centre / Shock Absorber Assembly - Unit Twins - Three Spring Clutch Correct fitment on later T120, all T140 and TR7 models....
+ −
Con Rod Big End Nut BSA A7, A10 - OEM: 67-1537
nut066M-B14
Con Rod Big End Nut BSA A7, A10
£2.95 (£3.54 inc VAT)
OEM: 67-1537
BIG END NUT - BSA A7, A10 500cc, 650cc Connecting rod, con rod, con-rod, big end nut, bearing shell nut. OEM: 67-1537
+ −
Crankshaft Main Bearing Triumph, Norton - OEM: 60-4167, 01-7822, 70-3835
bear836-F4
Crankshaft Main Bearing Triumph, Norton
£15.95 (£19.14 inc VAT)
OEM: 60-4167, 01-7822, 70-3835
Triumph 3TA, T21, T90 350cc Unit twins Crankshaft D/S Triumph 5TA, T100, TR5 500cc Unit twins Crankshaft D/S (ball race up to 1967) Triumph T120, TR6, 6T...
+ −
tapp470-B18
Triumph / BSA Hexagonal Tappet Nut - OEM: 70-0470
£1.25 (£1.50 inc VAT)
OEM: 70-0470
Hexagonal Tappet Nut- Triumph T120/T140 and BSA A7/A10 OEM: 70-0470 CEI thread Made in England
+ −
 Prev
1 2 3 4 5 6 7 8 9 10 11
Next  5 - 19

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.