.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

bear415-F4
£46.95 (£56.34 inc VAT)
OEM: E9493, 70-9493, 01-7824, 017824
Crankshaft Roller Bearing Drive side for Triumph 5TA/T100/TR5 500cc Unit twins (roller race 1968-) Norton Dominator/Model 7, 500,600,650cc models. OEM:...
+

bear437-F4
£13.95 (£16.74 inc VAT)
OEM: E9494, 70-9494
Crankshaft Main Bearing. Fits Triumph 500cc Unit Twins, 5TA,T100,TR5 etc timing side (1968-) OEM: E9494, 70-9494
+

gbox008-B18
£5.95 (£7.14 inc VAT)
OEM: 70-4565, E4565
Triumph Crankshaft Timing Pinion Nut - Unit 650cc Models Circa 1963-71 Correct fitment on unit 6T, T120 and TR6 models. OEM: 70-4565, E4565
+

clutch0986H-B23
£25.95 (£31.14 inc VAT)
OEM: 57-0986, 42-3173, T986
Triumph/BSA 4 Spring Steel Clutch Pressure Plate - Thrust Button Type As used on many pre unit Triumph models - 3T, 5T, T100, TR5, 6T, T110, TR6 and...
+

bolts283-B14
£9.95 (£11.94 inc VAT)
BSA A7/A10 Rockerbox mounting bolt set CEI 26TPI (5 piece set)
+

piston3615
£82.95 (£99.54 inc VAT)
OEM: 70-3615
Harris Pistons for Pre-Unit Triumph T100 500cc - 70-3615 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin,...

fkgk333
£11.95 (£14.34 inc VAT)
BSA - 175cc Two Stroke, D10 Bantam Bushman, Pastoral, Engine Gasket Set 1966-1967 Gasket set for the BSA Bantam D10, and other models.
+

valve034-B22
£16.95 (£20.34 inc VAT)
OEM: 65-1111
BSA B31, B32 (1950-59) Inlet Valve - Hepolite - 65-1111 BSA B31, B32 (1950-59) Inlet Valve Alpha valve number V42. OEM: 65-1111
+

bush1963-B13
£2.45 (£2.94 inc VAT)
OEM: T1963, 57-1963
Triumph Gearbox Mainshaft Pinion Sleeve Bush - T1963 Sleeve that supports the kickstart pinion spring on the gearbox main shaft. Suitable for T120 and...
+

fkscrew210-B9
£19.95 (£23.94 inc VAT)
OEM: 65-3063, 67-1706, 67-1711, 42-7517, 67-0133, 67-0132, 65-3063
Stainless Steel Allen Screw Kit - BSA A7, A10 Swinging arm Suit BSA A7 and A10 Swinging arm models Complete Set, includes allen keys. Stainless Steel....
+

gkch4021
£2.95 (£3.54 inc VAT)
OEM: 024021, 02-4021
Primary Chaincase Gasket - AJS. Matchless, 20CS, 31CS, G11CS, G12CS - 024021 Paper Chaincase Gasket Joint Washer OEM: 024021, 02-4021
+

hub3930-B23
£34.50 (£41.40 inc VAT)
OEM: 57-3930, T3930, 57-1751, 57-1386, T1386, T1751
Triumph Clutch Hub Sleeve - Unit 350/500cc Models From 1959 Onwards This is the clutch sleeve that fits on the gearbox shaft, and holds the clutch hub....
+

enginestud-239-B19
£1.95 (£2.34 inc VAT)
OEM: 21-1867
Short Alternator Mounting Stud Triumph 650 Twins - 1967 onwards Fits 650 Unit Twins from 1967 onwards OEM: 21-1867
+

pipe7387-B2
£9.95 (£11.94 inc VAT)
OEM: 83-7387
Triumph 'D' Type Rear Mudguard Breather Hose/Pipe - T140/TR7 1977 Onwards Silver coloured 'D' shaped pipe Approximately 52" (132cm) ID: 1/2" (13mm) OD:...
+

valv208-B17
£18.95 (£22.74 inc VAT)
OEM: 65-1146, 65-1147, Terry No.VS 345
BSA Valve Spring Set - B31, B33, M33 - 1950-60 Includes 2 inner springs - 65-1146 and 2 outer springs - 65-1147 Large Outer Springs: OD: 1+9/16"...
+

bolt0243-B18
£4.45 (£5.34 inc VAT)
OEM: 28-0243, 28-243
BSA Gearbox Drain Bolt - Pre Unit A, B and C Models from 1939 Onwards As used on many pre unit A, B and C models Overall Length: 5/8" (15.6mm) UH Length:...
+

valv0106-B17
£10.95 (£13.14 inc VAT)
OEM: 31-0106, 31-106, VS268
Valve Spring Set - BSA Singles - M20, M21, C10, C10L, B20, B23 Valve spring set - correct for listed models from approximately 1940-56 Terry no. VS268...
+

pipeGS272W-B3
£14.95 (£17.94 inc VAT)
OEM: GS272, 70-1503, E1503, 70-0004
Triumph Rear/Inlet Rocker Box Drain Pipe - Pre-Unit 500/650cc Models - 1938-62 Inlet rocker box oil drain pipe and banjo assembly to fit all 500/650cc...
+

enginestud-4536-B13
£8.45 (£10.14 inc VAT)
OEM: 70-4536, E4536
Triumph Long Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Front stator stud, correct fitment on unit 6T, T120 and TR6 models circa...
+

stud0672-B19
£2.45 (£2.94 inc VAT)
OEM: 70-0672, E672
Triumph Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...
+

pumpgkt2296
£1.95 (£2.34 inc VAT)
OEM: 71-2296, 68-0939, 68-939, 68-0293, 86-293
BSA Oil Pump Gasket - A50 and A65 Models Circa 1963-73 Correct fitment on 500/650cc unit twins. Made in England OEM: 71-2296, 68-0939, 68-939, 68-0293,...
+

kick3029-B4
£4.95 (£5.94 inc VAT)
OEM: 40-3029, 57-1163, T1163
BSA/Triumph Kickstart Anchor Plate - C15, B40 and T20 Tiger Cub Return spring plate as fitted to BSA C15 and  B40 models + Triumph T20 Tiger Cub models....
+

pmp7317-B13
£79.95 (£95.94 inc VAT)
OEM: 71-7317, E17317
Triumph 4 Valve Oil Pump - 750cc Twins Circa 1980-85 + Upgrade on 650/750cc Unit Twins From 1963 Onwards Complete four valve oil pump assembly with pump...
+

thrust-wash0685-B18
£21.95 (£26.34 inc VAT)
OEM: 68-0685, 68-685
BSA Crankshaft Thrust Washer - A50 and A65 Models Circa 1966-72 Bronze thrust washer that supports the crankshaft main bearing - correct fitment on...
+

renold-530/rivet-link-B12
£4.55 (£5.46 inc VAT)
530 Renold Classic Motorcycle Chain Rivet Link - 136SR 5/8" x 3/8" Rivet link to fit Renold 136SR 5/8" x 3/8" (P x W) standard 530 standard roller final...
+

kick3632-T
£119.95 (£143.94 inc VAT)
OEM: 57-1270, T1270, 57-3632, T3632, 57-7018, T7018
Heavy Duty Kickstart Lever - Triumph Pre Unit and Unit Models - Folding Type With Wide Bend Heavy duty kickstart crank assembly for use on trials...
+

o/filt68-8328
£29.95 (£35.94 inc VAT)
OEM: 68-8328, 83-1387, 83-3331
BSA Oil Tank Filter - A50 and A65 Circa 1962-70 + Early B44 Models - Pre 1967 Threaded gauze oil filter plug - correct fitment on A50 and A65 models +...
+

kick3279-B4
£12.95 (£15.54 inc VAT)
OEM: 57-2681, T2681, 40-3279
BSA/Triumph Kickstart Ratchet - Unit Singles With Side Points - Circa 1965-70 17T kickstart ratchet - correct fitment on B25, C25, C15, B40 and B44...
+

seal351-B7
£9.95 (£11.94 inc VAT)
OEM: 90-0749, 90-0147, 89-3006, 86-8769
Oil Seal Set - Engine and Gearbox - BSA Bantam D10 and D14 Models - Circa 1967-71 Suitable for three or four speed D10 and D14 Bantam models. Kit...
+

g/box3396-G15
£27.95 (£33.54 inc VAT)
OEM: 65-3396
BSA Speedometer Driven Gear Bush - A7 / A10 Models Circa 1960-62 + Early A50 / A65 Models Speedo driven gear with recess for rubber sealing washer -...
+

fkgk814By
£33.95 (£40.74 inc VAT)
Triumph Motorcycle - 500cc T100A, Tiger 100 SS (Thick Copper Head Gasket) Engine Gasket Set 1960-66 Triumph T100A, Triumph Tiger 100 SS with Thick Copper...
+

gk0256
£2.95 (£3.54 inc VAT)
OEM: 67-0256, 67-256
BSA Cylinder Base Gasket - All A7 and A10 Models From 1946 Onwards Cylinder barrel base washer - correct fitment on all A7 and A10 models. OEM:...
+

fkgk330c
£32.95 (£39.54 inc VAT)
BSA Motorcycle - 650cc A65 Twin, A65L (Copper Gasket) Engine Gasket Set 1962-66
+

fkgk822
£34.95 (£41.94 inc VAT)
OEM: E3730, 70-3730, NA43A, E4547, 70-4547, E3547, 70-3547, E3751, 70-3751, E5049, 70-5049, E3832, 70-3832, T1170, 57-1170, E4549, 70-1549, E1335, 70-1335, E4752, 70-4752, NE507, E5660, 70-5660, E7563, 70-7563
Triumph - 650cc Trophy, TR6 S/S, Bonneville, T120 Engine Gasket Set 1967-68 9 Stud Head Set contains the following gaskets: Oil Pump, Manifold x3,...
+

fkrub29
£1.99 (£2.39 inc VAT)
Ariel Kickstart Rubber - closed Suit Heavyweight Ariels - Closed end Length: 3+1/2" Hole: 9/16"
+

clplt329-B24
£7.95 (£9.54 inc VAT)
OEM: 67-3241
BSA, Ariel, Panther, Vincent Clutch Steel Plates - Surflex Fits Ariel Colt 200cc BSA C10L, C11G, C12 models (1954-58) A7, A10 Plunger models (1950-57)...
+

fkgk062
£13.95 (£16.74 inc VAT)
OEM: E9511, 70-9511, E3751, 70-3751, E1335, 70-1335, NA43, F1880, 82-1880
Triumph Rocker Box Gasket Set. For the later engine models Suit 3TA, T21, 5TA, T100, 350/500cc (1966 -) OEM: E9511, 70-9511, E3751, 70-3751, E1335,...
+

bolt660-B19
£3.95 (£4.74 inc VAT)
OEM: 70-1596
Triumph T120, TR6 etc, 650cc Cylinder Head bolt (with torque stay extension) OEM: 70-1596
+

kick009-G3
£37.95 (£45.54 inc VAT)
OEM: 42-3037
Kickstart Lever BSA A and B Models - Spring Top, Folding Type - 1954 Onwards Chrome plated forged steel. Plain Spindle hole 3/4" diameter. OEM type with...
+

pumpgkt735
£1.00 (£1.20 inc VAT)
AJS Matchless Oil Pump Gasket Single cylinder models
+

bolt206-B19
£4.45 (£5.34 inc VAT)
OEM: 21-2206
Triumph 650cc and 750cc Twin - Cylinder Head Bolt 3/5" UNF OEM: 21-2206
+

vvg400
£99.95 (£119.94 inc VAT)
OEM: 67-0031, 67-0323, 67-0324, 67-0742, 67-0743
BSA A10 Iron Head models Complete Valve Guide Set (1949-62). Includes Guides and Valves. Valve Guides : Set of 4 Cast Iron Guides (67-0031) OEM: 67-0031,...
+

vguide202-B22
£10.95 (£13.14 inc VAT)
OEM: 71-3295, E13295
Triumph T140 Bonneville, TR7 Exhaust Valve Guide (1973-78) One Valve Guide Available as Standard, +.002 oversize, +.004 oversize and +.006. +.015, +.025...

gkt319
£2.45 (£2.94 inc VAT)
OEM: GB26
Burman Gearbox - Inner Gearbox Gasket - GB26 OEM: GB26
+

valve022-B22
£16.95 (£20.34 inc VAT)
OEM: E3147, 70-3147
Triumph 200cc Exhaust Valve - 70-3147 Triumph T15, T20, T20C (1953-59) 200cc Exhaust Valve (Alpha valve no.V49) Head Diameter: 1.125 Stem Diameter:...
+

valve059-B22
£16.95 (£20.34 inc VAT)
OEM: E3963, 70-3963
Triumph 200cc Inlet Valve - 70-3963 Triumph T20, T20S, T20T (1959-68) 200cc Inlet Valve (Alpha valve no.V191) Head Diameter: 1.312 Stem Diameter: 03110...
+

cap004-B4
£6.95 (£8.34 inc VAT)
OEM: 01-4457
AJS/Matchless Primary Chaincase Inspection Cap Suitable for AJS/Matchless Models with the Pressed Steel Chaincase Screw in fixing and bar under the cap...
+

inlet3338/9
£33.95 (£40.74 inc VAT)
OEM: 71-3338, 71-3339, E13338, E13339
Triumph - Pair of Inlet Manifolds Left and Right Side - T140 - 1973-78 For use with a 30mm Amal carburettor Correct threaded hole to adapt the breather...
+

nut3053-B13
£6.95 (£8.34 inc VAT)
OEM: 67-3053
BSA Gearbox Sprocket Nut - A7, A10, B31, B33 + C10, C11 - 4 Speed Nut that holds the rear drive sprocket on the gearbox shaft OD: 1+7/8" (47.7mm) ID:...
+

valvecollar3742-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3742, E3742
Triumph - Valve Spring Top Collar - 350/500cc Unit Twins Valve spring retaining collar, sits on top of the valve spring with the valve collets. Made in...
+

nut0152-B14
£3.45 (£4.14 inc VAT)
OEM: 15-0152, 15-152, NM16187, 06-7664
7/16" x 20 TPI Nut  - BSA M20 & M21 Cylinder Base Nut + Norton Bottom Yoke Nut Height: 7/16" (10.8mm) OEM:  15-0152, 15-152, NM16187, 06-7664
+

clutch650-B23
£2.95 (£3.54 inc VAT)
OEM: 26-0650, 26-650
Clutch Rollers - BSA - 26-0650 - pack 10 Clutch centre rollers for BSA, duplex chain type BSA A7 and A10 early models with the 6-spring clutch and...
+

stub4791
£2.45 (£2.94 inc VAT)
OEM: 70-4791, E4791
Triumph - Inlet Manifold Balance Pipe Stub Connector - 650cc models from 1963-68 CEI thread. Polished stainless steel. Made in England using the...
+

shim0661-B18
£3.45 (£4.14 inc VAT)
OEM: 66-0661, 66-661
BSA Crankshaft Drive Side Shim - B & M Group Models - 1940-63 ID: 1" (25.4mm) OD: 1+9/16" (39.7mm) Thickness: 0.022" (0.5mm) Made in England OEM:...
+

bolt1601-B13
£3.45 (£4.14 inc VAT)
OEM: 70-1601, E1601
Triumph Rocker Oil Feed Banjo Adaptor Bolt - Pre-Unit Twins Correct fitment on many 500/650cc pre-unit twins from 1947 onwards Length UH: 3/4" (18.9mm)...
+

nut3120-B14
£5.45 (£6.54 inc VAT)
OEM: 70-3120, E3120
Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59 Engine sprocket nut as used on pre-unit T100, TR5, T110, TR6 and...
+

pist0630
£139.95 (£167.94 inc VAT)
OEM: 40-0630, 40-0632, 40-0634, 40-630, 40-632, 40-634
Gandini/GPM Piston - BSA C15 / BSA C25 - Circa 1959-67 Supplied as 1 piston, complete with rings, gudgeon pin and circlips 2x 1/16" Piston rings - 1st...

plate2909-B13
£5.95 (£7.14 inc VAT)
OEM: 70-2909, E2909
Triumph Patent Plate - 650 Twin Models Brass timing cover triangular name plate for 6T, T120 and TR6 models. Embossed with: Triumph 650 TWIN, MADE UNDER...
+

plate1678-B13
£2.95 (£3.54 inc VAT)
OEM: 70-1678, E1678
Triumph Patent Plate - Tiger 100 Models Brass timing cover triangular name plate for Tiger 100 models. Embossed with: Triumph TIGER 100, MADE UNDER...
+

0.8mm-paper
£1.10 (£1.32 inc VAT)
Cellulose Paper Gasket Material - 0.8mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet General Properties - a cellulose fibre base...

camplate4055-B4
£67.95 (£81.54 inc VAT)
OEM: 57-4055, T4055, 57-0500, T500, 57-3650, T3650
Triumph 4 Speed Gear Selector Camplate - Unit 650cc Twins + All Pre Unit Twins -1939-72 Gear selector camplate, correct fitment on 4 speed unit 650cc...
+

screw1077-B2
£0.45 (£0.54 inc VAT)
OEM: 71-1077, E11077
Triumph Short Breather Tube Stub/Cover Plate Screw - 500/650/750cc Unit Twins - 1970-83 3/16" Pozi-drive countersunk screw used to secure the breather...
+

TP-3223-210
£4.95 (£5.94 inc VAT)
OEM: 70-3223, E3223
Triumph Tappet Adjuster - 350/500cc Unit Models - Circa 1959-74 - Various Options Rocker adjusting pin - correct fitment on unit 3TA, 5TA, T90 and T100...
 

cover7318
£119.95 (£143.94 inc VAT)
OEM: 71-7318, E17318, 70-4567, E4567, 70-8797, E8797, 70-9246, E9246, 71-7042, E17042
Triumph Timing Cover - Unit 650cc Models + 750cc Twins Circa 1963-81 Polished alloy timing cover compatible with either a 2 valve or 4 valve oil pump....
+

seal289
£1.95 (£2.34 inc VAT)
OEM: 40-0679, 70-8153, E8153
BSA/Triumph Contact Breaker / Camshaft Oil Seal - Unit Singles From 1964 Onwards Camshaft oil seal, locates behind the contact plate - correct fitment on...
+

gearbox0406-B18
£9.95 (£11.94 inc VAT)
OEM: 57-0406, T406
Triumph Gearchange Quadrant Plunger - 4 Speed - All Pre Unit Models + Unit 650/750cc Twins and Triples Gearbox plunger with the correct cutaway for four...
+

gear2106-B4
£1.45 (£1.74 inc VAT)
OEM: 57-2106, 40-3155, T2106
Triumph/BSA Gearchange Quadrant Plunger Spring - T20 Tiger Cub Models + Unit Singles Gear change quadrant plunger - T20 Tiger Cub models from 1965...
+

plug3190-B13
£5.95 (£7.14 inc VAT)
OEM: 40-3190
BSA Gearbox Drain Plug and Level Tube - Unit Singles Circa 1965-67 Correct fitment on C15, B25, C25, B40, B44 models from 1965-67. Thin hexagon head -...
+

oilseal8023
£2.95 (£3.54 inc VAT)
OEM: 048023, D12/913, T2124, 04-8023
Norton Crankcase Timing Cover Mainshaft Oil Seal - 500/600/650/750cc Twins Mainshaft oil seal - locates in the crankcase timing cover. Correct fitment on...
+

clutch1318-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1318, T1318
Triumph Small Clutch Rebound Rubber - T20 Tiger Cub Models From 1954 Onwards Small clutch shock absorber rebound rubber as used on all T15 Terrier and T20...
+

stud0669
£4.45 (£5.34 inc VAT)
OEM: 21-0669, S669
Triumph Crankcase Halves Front Stud - 750cc Twins + Later T120 and TR6 Models From 1972 Onwards Crankcase front stud - secures the exhaust pipe stays. As...
+

clutch3643-B23
£9.95 (£11.94 inc VAT)
OEM: 57-3643, T3643
Triumph/BSA Clutch Shaft Needle Roller Bearing - T150, T160 and A75 Models Clutch shaft / hub needle race bearing as used on all 750cc triples from 1968...
+

nut1915-B13
£1.45 (£1.74 inc VAT)
OEM: 21-1915, S1915
Triumph Alternator Rotor Nut - T90, T100 and TR5T Models From 1969 Onwards To secure the alternator rotor on the shaft - correct fitment on 350/500cc...
+

seal0243
£1.95 (£2.34 inc VAT)
OEM: 40-0243, 70-3833, E3833
BSA/Triumph Clutch Back Plate Oil Seal - Unit Singles Circa 1959-72 Clutch / primary case backing plate oil seal. Suitable for C15, C25, B25, B40, B44,...
+

gearbox0407-B4
£14.95 (£17.94 inc VAT)
OEM: 57-0407 T407
Triumph Gearchange Quadrant Plunger Guide Plate - All Pre Unit + Unit 650/750cc Twins and Triples Locates over the gear change quadrant to support and...
+

gk9348-Copper
£8.95 (£10.74 inc VAT)
OEM: 70-9348, E9348
Triumph 650cc Rocker Box Gasket - Unit Models Circa 1969-70 - Copper Rocker box to cylinder head joint washer with push rod holes. Correct fitment on...
+

clip0954x2-B13
£1.95 (£2.34 inc VAT)
OEM: 66-0954, 66-954, 71-3185, 71-3700, 71-2970
BSA Triumph Piston Gudgeon Pin Circlips - G Shaped With Tangs 2 x piston wrist pin circlips suitable for a wide range of BSA models including: A10, C12,...
+

fkgk806
£31.95 (£38.34 inc VAT)
Triumph Motorcycle - 500cc Tiger 100, TR5 Engine Gasket Set 1951-58
+

clutch1132-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1132, T1132
Triumph Large Clutch Cush Drive Rubber - T20 Tiger Cub Models From 1954 Onwards Large clutch shock absorber drive rubber as used on all T15 Terrier and...
+

kick970H-B4
£16.95 (£20.34 inc VAT)
OEM: 57-0731
Kickstart ratchet for T120, T140 twins 650cc, 750cc and T150 triples. OEM: 57-0731
+

gear341-B8
£37.95 (£45.54 inc VAT)
OEM: 06-1499, 04-1311, 04-0632
Gear Lever Norton, AMC, Gearchange lever with rubber (1956-74). Fits Norton singles and twins with an AMC gearbox. Splined shaft diameter 5/8" OEM:...
+

pipe848-B3
£39.95 (£47.94 inc VAT)
OEM: 42-8344, 42-8345
BSA B Group (B31, B32, B34) armoured oil feed and return pipes (under gearbox routing) Comes as 2 pipes, approx 20" and 21" long, ready to fit. These route...
+

bigend212-B3
£18.95 (£22.74 inc VAT)
OEM: 70-3586, 70-3510, B2026M, E3586, E3510
Triumph Big End Bearing Shells Pre Unit and Unit 650cc Models + T140 and TR7 - 020 Triumph T120/TR6 (1956-75), T140/TR7 (1973-) Big End Shell Set. Also...
+

bigend238-B3
£24.95 (£29.94 inc VAT)
Triumph 3TA, 5TA, T100A, T100R etc.(350cc and 500cc twins) (1957-74) Big End Shell Set. Glacier number B2047M. Size : -0.020 Set qty : 2 pairs OEM:...
+

clplt337S-B24
£31.95 (£38.34 inc VAT)
OEM: G40-7, 3360-36, 3360-85, C24AS
Clutch Friction Plates - Burman, Ariel, Panther, Vincent - Standard or Surflex Inside Diameter: 115mm Outside Diameter: 174mm Stub Length: 7.4mm...
 

spr012-B24
£1.95 (£2.34 inc VAT)
OEM: 90-1367
BSA Bantam Clutch Spring (all models) Price is for One Spring Length: 1+3/16" (30mm) Diameter: 1/2" (13mm) OEM: 90-1367
+

vvg402
£99.95 (£119.94 inc VAT)
OEM: 68-0809, 68-0665, 68-0663
BSA A65 (1966-69) Models Complete Valve Guide set. Includes bronze guides, and valves. Valve Guides : Set of 4 Bronze Guides (68-0809) Valves : Set of 4...
+

clutch193-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1473, T1473, 57-1043, T1043
Small Clutch cush rubber (4 spring models). Fits 5T, 6T, Tiger 110, T100 and T120 Bonneville. Price is for ONE (1) rubber, you will need 4 for the clutch...
+

9914-W
£8.95 (£10.74 inc VAT)
OEM: 70-9914, E9914
Conrod Big End Bolt - Triumph 500/750cc Unit Twins + Triumph/BSA 250cc Unit Singles Connecting rod bolts as fitted to  T100, TR5T models circa 1971-74...
 

box992-G15
£49.95 (£59.94 inc VAT)
OEM: E1925, 60-1925, 99-9992
Speedometer Gearbox, Ratio 15:12 Wheel spindle hole: 11/16" (17mm) Gearbox drive hole: 2" Cable output direction details: - with gearbox mounted on...
+

gear021-B4
£4.75 (£5.70 inc VAT)
OEM: 04-0479
Gearbox selector Return Spring, AJS, Matchless, Norton AMC Gearbox selector Return Spring. Fits Norton Commando and Dominator. OEM: 04-0479
+

valve050-B22
£16.95 (£20.34 inc VAT)
OEM: 40-0166, V170
BSA Exhaust Valve C15, C15S, C15T from 1959-65 - 40-0166 Head Diameter: 1.312 Stem Diameter: 0.3100 Length: 3.525 Alpha guide number V170 OEM:...
+

bolt113-B19
£3.95 (£4.74 inc VAT)
OEM: 70-4456
Triumph T90/T100 Cylinder head bolt (outer with extended hexagon). High Tensile 3/8" x 2-3/4" 26TPI bolts. OEM: 70-4456
+

e-sprock345-B9
£16.95 (£20.34 inc VAT)
OEM: 15-1564
BSA B & M Group - M20, M21, B31, A10 - 4 Lobe Engine Sprocket 20T Chain Pitch: 1/2'' x 5/16'' Number of Teeth: 20T OEM: 15-1564

piston7086
£92.95 (£111.54 inc VAT)
OEM: 71-7086
Harris Pistons for Triumph T140, TR7T 750cc - 71-7086 For low compression 750cc, perfect for Unleaded Fuel use. Pair of high quality pistons, Made in...

valve013-B22
£16.95 (£20.34 inc VAT)
OEM: E2969, 70-2969
Triumph 500cc Inlet Valve - 70-2969 Triumph T100, TR5 (1951-59) 500cc Inlet Valve (Alpha valve no.V25) Head Diameter: 1.437 Stem Diameter: 0.3105 Length:...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.