.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

spr971H-B24
£1.95 (£2.34 inc VAT)
OEM: 57-4644
Triumph Clutch Spring, for Triumph T140, TR7 (1973-85) Clutch spring for 3 and 4 spring clutches. Length: 1+3/4" (45mm) Diameter: 21/32" (17mm) Price is...
+

bigend232-B3
£19.95 (£23.94 inc VAT)
BSA A10, A10SR, A10RR (1956-63) A50, A65 (1962-71) Large journal, Big End Shell Set. Glacier number B2046M. Size : -0.010 Set qty : 2 pairs OEM: 67-1431,...
+

gear4027-B4
£2.95 (£3.54 inc VAT)
OEM: 57-4027, 68-3125, 68-3084
BSA Gearchange Return Spring - A50 and A65 Models Circa 1962-69 Early type gear change lever return spring - correct fitment on A50 and A65 models circa...
+

sprock654-B5
£19.95 (£23.94 inc VAT)
OEM: 57-1715
Triumph T120, T110, T6, 5T Pre Unit models (1947-62) Chain Pitch: 5/8" x 3/8" (530) Number of Teeth: 19 OEM: 57-1715, T1715, T471A, 57-0471
+

tapp070H-B18
£4.95 (£5.94 inc VAT)
OEM: 70-1513, 67-0056
Hexagonal Tappet Adjuster - Triumph T120/T140 and BSA A7/A10 CEI thread Approx diameter across thread = 5/16" (8mm) OEM: 70-1513, 67-0056
+

bear020
£12.95 (£15.54 inc VAT)
OEM: 24-4065, 89-16
Gearbox Bearing - BSA - A & B Models Example: BSA A10 Mainshaft, next to drive sprocket. OEM: 24-4065, 89-16
+

gkt318
£2.45 (£2.94 inc VAT)
OEM: GB26
Burman Gearbox - Outer Gearbox Gasket - GB26 OEM: GB26
+

gkt055
£1.95 (£2.34 inc VAT)
OEM: 04-0055
AMC, Norton Gearbox - Outer Gearbox Gasket - 04-0055 Fits the Norton Commando 750 amongst others. OEM: 04-0055
+

rub3259-B4
£3.95 (£4.74 inc VAT)
OEM: 66-3259
BSA Kickstart Quadrant Stop Rubber - 66-3259 Kickstart Return Stop Rubber. To suit many BSA Models including B31, B33, M21, M20 OEM: 66-3259
+

gkch4020
£2.95 (£3.54 inc VAT)
OEM: 024020, 02-4020
Primary Chaincase Gasket - AJS. Matchless, 16, 18, G3, G80 - 024020 Paper Chaincase Gasket Joint Washer OEM: 024020, 02-4020
+

bush3099-B8
£27.95 (£33.54 inc VAT)
OEM: 67-3099
BSA Layshaft Bush - Kickstart End - A and B Plunger & Swing Arm Models + C Models To fit BSA A & B Models - Swinging Arm and Plunger + C10 &...
+

clutch11-7-11-B23
£2.95 (£3.54 inc VAT)
OEM: 11-7-11
Burman Clutch Centre Retaining Nut - Various Models B52 Clutch Clutch centre mainshaft retaining nut. OD: 1+3/16" (30mm) ID: 5/8" 20 TPI Made in...
+

kick3273-B4
£1.45 (£1.74 inc VAT)
OEM: 40-3273, 57,2684, T2684
Triumph/BSA - Kickstart Ratchet Spring - Triumph TR25 + BSA C & B Group Models Fits Triumph TR25W and TR25SS/T models + BSA C25, B25, B44, B50 and...
+

conrod9525
£129.95 (£155.94 inc VAT)
OEM: 70-9525, E9525, 70-3606, E3606
Triumph Connecting Rod - All 650cc Unit Twins + Pre Unit 500/650cc Models From 1956 Onwards Forged alloy with steel connecting rod cap - supplied with...
+

shim2056-B13
£3.95 (£4.74 inc VAT)
OEM: 67-2056, 67-2057, 67-2058
BSA Engine Sprocket Shims  - A7, A10 Models from 1946-62 ID: 1" (25.6mm) OD: 1+7/16" (36.5mm) 5x 0.010" - stack as required. Made in England OEM:...
+

nut0643-B18
£4.95 (£5.94 inc VAT)
OEM: 67-0643, 67-643
BSA Crankshaft Timing Side Pinion Drive Nut - A50, A65, A7, A10 Models - LH Thread Half time pinion gear locknut as used on all BSA A50/A65 models from...
+

gearbox3978-B13
£0.65 (£0.78 inc VAT)
OEM: 57-3978, T3978
Triumph Gearbox Camplate Index Plunger Washer - 650/750cc Twins and Triples Correct fitment on T120, TR6, T140, T150 and T160 models from 1970 onwards....
+

kick1230-S
£119.95 (£143.94 inc VAT)
OEM: 57-1230, T1230, 57-1679, T1679, 57-1165, T1165
Kickstart Lever - BSA Unit Singles + Tiger Cub Models - Heavy Duty Folding Type With Standard Bend Heavy duty kickstart crank assembly for use on...
+

clutch3263-E12
£3.45 (£4.14 inc VAT)
OEM: 68-3263
BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment and...
+

circlip3026-B13
£3.95 (£4.74 inc VAT)
OEM: 67-3026
BSA Gearbox Mainshaft Bearing Circlip - Clutch End - A, B and C Group Models Gearbox mainshaft bearing / sprocket oil seal spring ring - clutch end....
+

circlip2240-B13
£1.95 (£2.34 inc VAT)
OEM: 65-2240
BSA Crankshaft Main Bearing Drive Side Circlip - M and B Group Models Circa 1939-63 Main bearing spring ring - drive end. Correct fitment on all B31, B33,...
+

fkgk3226
£1.95 (£2.34 inc VAT)
OEM: 70-3226, E3226
Triumph Rocker Box Gasket - T20 Tiger Cub Models From 1954 Onwards Rocker cover joint washer - correct fitment on all T15 and T20 models. OEM: 70-3226...
+

kick3271-B4
£32.95 (£39.54 inc VAT)
OEM: 57-2683, T2683, 40-3271
BSA/Triumph Kickstart Pinion - Unit Singles With Side Points - Circa 1965-70 17T kickstart ratchet pinion - correct fitment on B25, C25, C15, B40 and B44...
+

fkgk165y
£27.95 (£33.54 inc VAT)
AJS Motorcycle - 500cc 18,18S Engine Gasket Set 1949-1961 AJS Model 18, AJS Model 18S 500cc - Complete Engine Gasket Set from 1949 to 1961 The Gasket set...
+

fkgk335-tri
£24.95 (£29.94 inc VAT)
Triumph TR25W, T25SS, T25T - 250cc Engine Gasket Set Triumph TR25W, Triumph T25SS and Triumph T25T 250cc Engine Gasket set - from 1967 to 1970 Includes...
+

gkch1454
£3.95 (£4.74 inc VAT)
OEM: 71-1454, 57-2581, E11454, T2581
Triumph/BSA Triples Primary Chaincase Cover Gasket - T150, T160 Trident + A75 Models Inner to outer chain case joint washer - correct fitment on all T150,...
+

nut1906-B13
£0.95 (£1.14 inc VAT)
OEM: 21-1906, S1906
Triumph Oil Pump Mounting Nut - 500/650cc Models From 1969 Onwards + 750cc Twins Circa 1973-79 Bevelled oil pump mounting nut with UNF threads. Correct...
+

fkgk308
£19.95 (£23.94 inc VAT)
BSA Motorcycle - 350cc B31, B32 Competition Engine Gasket Set 1949-60 (No head gasket in this set) BSA B31, BSA B32 Competition, Engine Gasket Set from 1949...
+

fkgk328
£25.95 (£31.14 inc VAT)
BSA Motorcycle - 350cc B40 Star, SS90 Engine Gasket Set 1960-65
+

fkgk801
£21.95 (£26.34 inc VAT)
OEM: E3579, 70-3579, E3217, 70-3217
Triumph - 199cc OHV T20, Tiger Cub Engine Gasket Set 1954-59 Triumph T20 Tiger Cub Engine Gasket Set from 1954 1959 Includes gaskets as shown in the photos...
+

fkgk818
£37.95 (£45.54 inc VAT)
OEM: E3730, 70-3730, E3334, 70-3334, NA43A, E2894, 70-2894, E4545, 70-4547, E1486, 70-1496, E3547, 70-3547, E3751, 70-3751, E5049, 70-5049, E3832, 70-3832, T1170, 57-1170, E1670, 70-1670,E4549, 70-1549, E1335, 70-1335
Triumph - 650cc T120, Bonneville, Trophy TR6, Thunderbird, 6T Engine Gasket Set 1963-66 Set contains the following gaskets: Oil Pump, Manifold x3,...
+

sprock426-B10
£30.95 (£37.14 inc VAT)
OEM: 57-1919
Triumph TR6, T120 etc 1963-74, T150 1969-72 4 speed Gearbox Sprocket 20T Chain Pitch: 5/8" x 3/8" (530) Number of Teeth: 20 OEM: 57-1919, T1919
+

box7091-G15
£31.95 (£38.34 inc VAT)
OEM: 60-7091
Veglia Type Speedometer Gearbox, Ratio 1.25:1 Wheel spindle hole: 5/8" Gearbox drive hole: 1" Drive finger on outside of gearbox Cable output...
+

kick126-B4
£4.95 (£5.94 inc VAT)
OEM: 66-3058
BSA B and M Group Kickstart Spring - B31, B33, M20, M21 etc OEM: 66-3058
+

valv025-B18
£2.95 (£3.54 inc VAT)
OEM: 70-6062
Triumph Oil pressure release valve spring for 350/500/650cc Unit models. OEM: 70-6062
+

pist278
£82.95 (£99.54 inc VAT)
OEM: 68-0784
Pair of Hepolite Pistons for BSA A65 650cc models etc (1962-73). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore Size...

pist325
£82.95 (£99.54 inc VAT)
OEM: 70-4021, E4021, 18786, CP179
Pair of Hepolite Pistons for Triumph T100 500cc models etc (1958-67). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore...

guide150-B22
£11.95 (£14.34 inc VAT)
OEM: 70-6301
Triumph Tiger 90 (1966-69) T100, T100C, T100S (1966) T100, T100C, T100S, T100T (1967-70) Inlet and Exhaust Guide Equivalent to (Alpha guide no.G461PB)...

fkchain-251r-B12
£29.95 (£35.94 inc VAT)
OEM: 110500, 67-0296, 67-296, 29-2199, 10343-54
52 Link Endless Dynamo Chain - BSA A7/A10 + C Group Models + Ariel Huntmaster As used on A7 and A10 models circa 1947-63 + C group models circa 1939-53....
+

piston1563
£89.95 (£107.94 inc VAT)
OEM: 70-1563, E1563
Harris Pistons for Pre-Unit Triumph 5T 500cc - 70-1563 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin, Ring...

clip3700-B13
£1.95 (£2.34 inc VAT)
OEM: 71-3700
Circlip for Triumph Piston Pin - 71-3700 2 x Circlips for Triumph T140 pistons, and other makes/models too. Secures the gudgeon pin, or wristpin....
+

kick007-B8
£42.95 (£51.54 inc VAT)
OEM: 90-1708
Kickstart Lever BSA Bantam D1, D3, D5, D7, D10, D14 Small spline kickstart crank Chrome finish, includes pinch bolt. OEM: 90-1708
+

bolt14-0103-B19
£0.75 (£0.90 inc VAT)
OEM: 14-0103
Triumph Mounting Bolt - 14-0103 1/4" UNF bolt, used widely on Triumph motorcycle OEM: 14-0103
+

pipe5370-B13
£8.95 (£10.74 inc VAT)
OEM: 70-5370, E5370
Triumph Oil Tank Crankcase Breather 'T' Piece - 500/650cc Unit Twins - 1967-70 Crankcase to oil tank breather hose fitting. OEM: 70-5370, E5370
+

off-ren428-134
£49.95 (£59.94 inc VAT)
428 Renthal R1 MX Chain - Ideal For Trials/Motocross - 1/2" x 5/16" Standard Chain - 134 Links Top quality heavy duty non 'O' ring chain  designed...
+

stud1996-B19
£1.95 (£2.34 inc VAT)
OEM: 21-1996, S1996
Triumph Carburettor to Manifold Stud - Single Carb 650/750cc Unit Twins - 1968-82 Shouldered inlet manifold stud, correct fitment on TR6, and TR7 models....
+

oilseal40526
£4.95 (£5.94 inc VAT)
OEM: 40-0025, 40-25
BSA Crankshaft Oil Seal - Trials Models - Thin Type For Talon 18T Engine Sprocket Use in conjunction with the Talon 18T engine sprocket on BSA C15, C25,...
+

circlip3028-B13
£1.95 (£2.34 inc VAT)
OEM: 67-3028
BSA Gearbox Mainshaft Bearing Circlip - Kickstart End - A, B and C Group Models Gearbox mainshaft bearing spring ring - kickstart end. Correct fitment on...
+

gk3763
£0.95 (£1.14 inc VAT)
OEM: 70-3763, E3763
Triumph Oil Junction Block Gasket - 350/500/650cc Unit Twins Circa 1959-70 - 3 Hole 4 hole version also available - see related products. OEM:  70-3763,...
+

tach0585-G15
£19.95 (£23.94 inc VAT)
OEM: 68-0585, 68-585
BSA Tacho Drive Adapter / Nipple - A50 and A65 Models Circa 1964-72 Alloy rev counter drive nipple - locates over the drive pin from the oil pump -...
+

fkcap031-F2
£23.95 (£28.74 inc VAT)
OEM: 82-3216, F3216
2" Non-Vented Petrol or Oil Tank Filler Cap - Chrome Plated 2" fuel / oil cap without vent hole - push turn fit and integral cork seal. Will fit most...
+

boltset-alloy-head-B14
£27.95 (£33.54 inc VAT)
OEM: 67-1115, 67-1116, 67-283, 67-0283
BSA A7/A10 Alloy Head Cylinder Head Bolt Set - R, SR, SS Rocket, Super Rocket, SS, etc. 9 piece set. OEM: 67-1115, 67-1116, 67-283, 67-0283 Made in...
+

seal350-B7
£7.95 (£9.54 inc VAT)
OEM: 90-0749, 90-0147, 89-3006
Oil Seal Set - Engine and Gearbox - BSA Bantam D1, D3, D5, D7 Models - Circa 1954-66 Suitable for three speed Bantam models as listed above. Kit...
+

fkgk165z
£27.95 (£33.54 inc VAT)
AJS Motorcycle - 350cc 16, 16MS Engine Gasket Set 1949-61 AJS Model 16, AJS Model 16MS 350cc - Complete Engine Gasket Set from 1949 to 1961 The Gasket set...
+

clplt272b-B24
£8.95 (£10.74 inc VAT)
OEM: 57-1362, 68-3267, 42-3262
BSA A50, A65 Clutch Friction Plates (4 Spring Clutch) Also some BSA A7/A10 models with 4 spring clutch Inside Diameter: 106mm Outside Diameter: 155mm Stub...
+

off-gsprk482-13
£16.95 (£20.34 inc VAT)
OEM: 90-0299, 90-299
BSA Bantam - 420 Chain Gearbox Sprocket - 13T or 14T - Talon Front sprocket suitable for BSA Bantam trials/competition models using standard 420 chain....
 

fkgk338
£32.95 (£39.54 inc VAT)
BSA Motorcycle - 650cc A65 Twin (Copper Gasket) Engine Gasket Set 1971-on BSA A65 650cc Engine Gasket Set with Copper Cylinder Head Gasket from 1971 on...
+

fkgk841
£57.95 (£69.54 inc VAT)
Triumph Motorcycle - 750cc TR7, T140 (Composite Head Gasket) Engine Gasket Set 1973-on
+

valv870-B18
£5.95 (£7.14 inc VAT)
OEM: 70-6596
Triumph T150, T160 , 350/500/650cc Unit models (oil pressure release) Valve Cap Fits Most Triumph models OEM: 70-6596
+

gk-cg01
£11.95 (£14.34 inc VAT)
OEM: E1650, 70-1650, E1577, 70-1577, 70-1335, E1335, E3075, 70-3075, NA43, F1880, 82-1880
Triumph 5T, 6T Pre-unit Iron Head Rocker Box Gasket Set up to 1961 Comprises of 10 gaskets and several washers Includes 2 carb manifold gaskets, 1 is for...
+

sprock476-B5
£24.95 (£29.94 inc VAT)
OEM: 57-0471A
Triumph T120, T110, T6, 5T Pre Unit models (1947-62) Chain Pitch: 5/8" x 3/8" (530) Number of Teeth: 18 OEM: 57-0471A, T471A, T471A/18, 57-0471/18
+

bolt763-B19
£1.95 (£2.34 inc VAT)
OEM: 21-1875
Triumph High tensile bolt 1/4 x 1/4 UNC. Rockerbox corner bolt (1969-) OEM: 21-1875
+

clutch9906-B23
£114.95 (£137.94 inc VAT)
Clutch hub complete Shock Assembly Triumph clutch hub centre complete, for unit and pre-unit Triumph This is the complete centre unit, including the...
+

engine2440-B13
£14.95 (£17.94 inc VAT)
OEM: 57-2440, T2440
Triumph Rotor Cover - 500/650/750cc Unit Twins Circa 1968-75 Cover for the primary chaincase front over the alternator. Correct fitment on T120, TR6,...
+

fkbrk112-C4
£7.95 (£9.54 inc VAT)
OEM: 70-4778, E4778
HEAD STEADY BRACKET - TRIUMPH Triumph Head Steady bracket for 500/650cc models. Note: These brackets have been stored loosely which has chipped the paint...
+

pinion3376-B4
£45.95 (£55.14 inc VAT)
OEM: 67-3376
BSA Kickstart Ratchet Pinion - A, B and C Group Models Circa 1954-62 17T kickstarter pinion as used on all A7, A10, C10L and C12 models circa 1954-62....
+

oilcap3463-B4
£10.95 (£13.14 inc VAT)
OEM: 71-3463, E3463
Triumph/BSA Oil Filler Cap with Dipstick - Unit Models from 1971-83 Complete dipstick assembly includes: zinc plated filler cap, dipstick and retaining...
+

seal3761
£0.75 (£0.90 inc VAT)
OEM: 37-3761, W3761
O Ring - Nitrile Seal - ID: 7/6", OD: 1/2" - Various Applications ID: 7/6" (10.8mm) OD: 1/2" (12.4mm) OEM: 37-3761, W3761
+

bolt0241-B19
£2.45 (£2.94 inc VAT)
OEM: 14-0241
Triumph T140, TR7 Cylinder Head Bolt - UNF Thread Length UH: 3+1/2" (88.6mm) Diameter: 3/8" UNF thread OEM: 14-0241
+

rings100
£37.95 (£45.54 inc VAT)
OEM: R13570
Pair of Hepolite Piston Rings for Triumph 500cc T100 Models Circa 1958-74 Supplied as 2 sets of Hepolite piston rings. Bore Size: 69mm standard,...

gk-3449
£1.45 (£1.74 inc VAT)
OEM: 29-3449
BSA Gearbox Inspection Cover Gasket - A, B Swinging Arm and 4 Speed C Group - Circa 1954-62 Correct fitment on A7, A10, B31, B32, B33, B34 swinging arm...
+

0.5mm-paper
£1.00 (£1.20 inc VAT)
Cellulose Paper Gasket Material - 0.5mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet General Properties - a cellulose fibre base...

stud2973-B19
£2.45 (£2.94 inc VAT)
OEM: 70-2973, E2973
Triumph Inlet Manifold Stud - Single Carb Pre Unit 500/650cc Twins + Unit 650cc Models Short inlet manifold to cylinder head stud. Correct fitment on...
+

chainMTX520
£19.95 (£23.94 inc VAT)
OEM: 110054
Gold Standard Heavy Duty 520 Motorcycle Chain - MTX - 116, 120 or 130 Links Supplied with a connecting spring link. 135RESR 5/8" x 1/4" (P x W)...

bearing0011-F4
£3.45 (£4.14 inc VAT)
OEM: 90-0011, 90-11, 70-8151, E8151
BSA Gearbox Mainshaft Bearing - 4 Speed C Group + Bantam Models and Unit Singles C10L and C12 4 speed models + Bantam D1, D3, D5, D7, D10, D14 and B175...
+

bush0400-B8
£5.95 (£7.14 inc VAT)
OEM: 70-0400, E400
Triumph Timing Gear Intermediate Wheel Bush - Pre Unit and Unit Twins - Circa 1946-1982 Correct fitment on all 350/500/650/750cc pre unit and unit twins...
+

gearbox2595-B13
£2.95 (£3.54 inc VAT)
OEM: 57-2595, T2595, NT261
Triumph Gearbox Camplate Roller - Pre Unit 350/500/650cc + Unit 650/750cc Models - Circa 1946-70 Gearbox camplate gear control / selector fork roller -...
+

nut2228-B13
£2.95 (£3.54 inc VAT)
OEM: 70-2228, E2228
Triumph Dynamo To Gear Case Domed Nut - Pre Unit 350/500/650cc Models - Circa 1946-59 Locates in the top right hand side of the timing case. Correct...
+

rocker006B-B4
£14.95 (£17.94 inc VAT)
OEM: 70-1564, E1564, 40-0968
Triumph Hexagonal Head Pre Unit Rocker Box Inspection Cap / Sump Plug - Unit 350/500cc Models Premium quality polished billet alloy with hexagonal head...
+

gear-sw008-B4
£11.95 (£14.34 inc VAT)
OEM: 33906, 39184, 60-7240, 60-4508, 06-5390, 147SA
Triumph/Norton Neutral Gear Light Switch - Later 750cc Twins and Triples + Commando Models Genuine Lucas 147SA type neutral indicator switch with spade...
+

bolt3809-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3809, E3809
Triumph Rocker Oil Feed Bolt - Unit 350/500cc Models Circa 1958-74 Oil feed pipe retaining bolt - correct fitment on 3TA, 5TA, T90 and T100 models from...
+

fkscrew209-B9
£15.95 (£19.14 inc VAT)
Stainless Steel Allen Screw Kit - BSA A50 and A65 Models From 1968 Onwards - UNC Threads Stainless steel UNC bolt set suitable for A50 and A65 models...
+

bear3292-B8
£3.95 (£4.74 inc VAT)
OEM: 40-3292, 70-8005, E8005
BSA/Triumph Layshaft / Kickstart Spindle Needle Roller Bearing - Unit Singles Circa 1965-71 Open ended needle roller bearing used on both the layshaft...
+

bearing205c-F4
£8.95 (£10.74 inc VAT)
OEM: 65-2045, T34
BSA Crankshaft Main Drive Side Ball Bearing - B and M Group Models Circa 1946-63 Outer drive side ball bearing - correct fitment on B31, B32, B33, B34,...
+

screw7178-E9
£3.95 (£4.74 inc VAT)
OEM: 24-7178
BSA Tank Knee Grip / Number Plate Mounting Screw + Gearbox Inspection Cover on Pre-Unit Models Used extensively on pre-unit and unit BSA models. Fuel...
+

nut1877-B14
£0.45 (£0.54 inc VAT)
OEM: 21-1877, S1877
1/4" UNF Nut - Triumph Inlet Manifold to Head Nut - 650/750cc Unit Twins Circa 1969-82 + Universal Use Inlet manifold to head stud securing nut on T100,...
+

fkgk805
£31.95 (£38.34 inc VAT)
Triumph Motorcycle - 650cc Thunderbird (Iron Head), TR6, TR110 (Pre unit) Engine Gasket Set 1949-55
+

headgk532
£9.95 (£11.94 inc VAT)
OEM: 71-4619
Cylinder Head Gasket Triumph 750cc 10 Hole, Compound T140, TR7 750cc. OEM 71-4619
+

fkkick57-G3
£38.95 (£46.74 inc VAT)
OEM: 57-1438, 57-1485, T1438, T1485, 57-1677, T1677
Triumph Kickstart Lever  Early 350/500cc Unit Twins - Short Type Correct for 3TA, 5TA, T90 and T100 models from 1959-63 Can also be used on later 500cc...
+

bigend231-B3
£19.95 (£23.94 inc VAT)
BSA A10, A10SR, A10RR (1956-63) A50, A65 (1962-71) Large journal, Big End Shell Set. Glacier number B2046M. Size : Standard Set qty : 2 pairs OEM:...
+

bolt297-B19
£16.95 (£20.34 inc VAT)
OEM: 67-1536
BIG END BOLT - BSA A7, A10 500cc, 650cc OEM: 67-1536
+

rod191-B17
£15.95 (£19.14 inc VAT)
OEM: 70-4751, 70-4751A, E4751
Triumph Pushrod Tube - T90 and T100, 350/500cc Unit Models - Billet Alloy 70-4751 UK Made Billet Alloy push rod tube Triumph T90/T100 (1964-68) These...
+

valv250-B17
£16.45 (£19.74 inc VAT)
OEM: 68-0805, 68-0806, 71-1177, 68-0930
Valve Spring Set - BSA A65T, A65L etc (1966-72) (Terry no. VS 641) Includes 4 inner springs (71-1177) and 4 outer springs (68-0930). Made in England....
+

fkscrew208-B9
£14.95 (£17.94 inc VAT)
Stainless Steel Allen Screw Kit - BSA A50, A65 pre 1968 Suit BSA A50 and A65 pre 1968 models Complete Set, includes allen keys. Stainless Steel. (BSF threads)
+

clutch2062-B23
£2.95 (£3.54 inc VAT)
OEM: 57-2062
Clutch Cable Abutment - Short Slotted Ferrule Type - Triumph Unit Twins Pre 1968 Overall Length: 9/16" (14.5mm) Diameter: 7/16" (11mm) OEM: 57-2062, T2062
+

nut2182-B13
£2.45 (£2.94 inc VAT)
OEM: 70-3735
Alternator Rotor Nut - Triumph T120, T140, TR7, T160 - 1971-82 To secure the alternator rotor on the shaft. Thread: 7/16" UNF - 20 TPI Longer type with...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.