.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

bear016-2RS
£4.95 (£5.94 inc VAT)
OEM: 65-5883, 37-1041, 41-6016, 01-2542
Ball Bearing Range of uses including: Wheel bearing, wheel bearing, transmission and engine bearing Imperial sized bearing, for British Motorcycles OD:...
+

bolt752-B14
£18.95 (£22.74 inc VAT)
Engine/Gearbox Mounting Bolt Set BSA A10, A7 Swinging Arm models 10 piece UK Version: does not have nuts on 4 of the bolts

screw0688-B4
£0.75 (£0.90 inc VAT)
OEM: 97-0688, H688
Triumph Slotted Nacelle Motif / Gear Pointer Screw - 5BA x 1/4" Full thread 1/4" UH (6.7mm) OEM: 97-0688, H688
+

bush0378-B8
£7.45 (£8.94 inc VAT)
OEM: 70-0378, E378
Triumph Timing Cover Crankshaft Oil Feed Bush - 500/650cc Pre Unit Models From 1946 Onwards Timing gear cover to crankshaft oil feed bush as fitted to all...
+

spindle0375-B18
£7.45 (£8.94 inc VAT)
OEM: 70-0375, E375
Triumph Timing Gear Intermediate Wheel Spindle - All Pre Unit and Unit Twins - Circa 1946-1982 Spindle for intermediate timing gear as fitted to all...
+

wash1031-B18
£1.95 (£2.34 inc VAT)
OEM: 57-1031, T1031
Triumph Primary Chaincase Oil Retainer Plate - Pre Unit Twins Circa 1952-56 Oil sealing washer, locates within the inner chaincase behind the retaining...
+

cambush2260-B8
£5.95 (£7.14 inc VAT)
OEM: 70-2260, E2260, E1516, 70-1516
Triumph 650/750cc Camshaft Bush Left Hand - 70-2260 Single camshaft bush, Left Hand Side of engine, Made in England Normally 2 required per engine, one...
+

screwkit-81-B9
£26.95 (£32.34 inc VAT)
OEM: 70-3800, E3800, 70-3801, E3801, 70-3802, E3802, 70-3804, E3804, 70-3668, E3668, 57-1401, 57-1402, 57-1944
Engine and Gearbox Cover Screw Set - Triumph 350/500cc Twins 1957-68 Screw set to secure the primary, gearbox and timing cover on unit 3TA, 5TA and T100...
+

screw0496-B18
£2.95 (£3.54 inc VAT)
OEM: 57-0496, T496
Triumph Primary Chaincase Oil Adjuster Screw - Pre Unit Twins Circa 1939-62 Rear chain oiler / oil restrictor screw - correct fitment on all pre unit...
+

bolt401-B19
£1.95 (£2.34 inc VAT)
OEM: 14-1401
Triumph 650cc Twin - Cylinder Head Stud - 14-1401 Also fits some of the T140 750cc UNF & UNC OEM: 14-1401
+

nut3735-B13
£2.95 (£3.54 inc VAT)
OEM: 70-3735
Alternator Rotor Nut - Triumph - 70-3735 To secure the alternator rotor on the shaft. Triumph 350cc and 500cc OEM: 70-3735
+

off-esprk418
£25.95 (£31.14 inc VAT)
OEM: 40-0582, 40-582
BSA C15/B40 - Duplex Engine Primary Drive Sprocket - 18T Crankshaft sprocket for BSA C15, C25, B25 and B40 trials/competition models. You will need to...
+

dowel3074-B13
£1.45 (£1.74 inc VAT)
OEM: 66-3074, 70-8010, E8010
BSA Gearbox Cover / Primary Chaincase / Timing Cover Dowel - Various Models From 1949 Onwards Hollow locating dowel used to align the various cases and...
+

bigend236-B3
£24.95 (£29.94 inc VAT)
Triumph 3TA, 5TA, T100A, T100R etc.(350cc and 500cc twins) (1957-74) Big End Shell Set. Glacier number B2047M. Size : Standard Set qty : 2 pairs OEM:...
+

pipe5115-B2
£6.45 (£7.74 inc VAT)
OEM: 83-4122, 83-5114, 83-5115
BSA Breather Hose/Pipe - All B50 Models - 1969 onwards Attaches to the breather stub on your crankcase (primary side) Silver coloured round profile...
+

screw1647-B13
£2.95 (£3.54 inc VAT)
OEM: 70-1647, E1647
Triumph Crankcase Inner Boss Joint Screw - Pre Unit 350/500/650cc Models - Circa 1946-62 Correct fitment on pre unit 3T,  5T, T100, TR5, 6T, T110, TR6...
+

filt893-B3
£15.95 (£19.14 inc VAT)
OEM: 29-7962, 82-9071
Oil Tank Filter - BSA C11, C25, B25, B44, A10 and A7 Models Plunger and rigid frame models. Also fits the Triumph TR25W. Available as standard or UK...

nut0076-B14
£1.25 (£1.50 inc VAT)
OEM: W76, 37-0076
Triumph Twin - Cylinder Base Nut - W76 Also used in some pre-unit gearboxes OEM: W76, 37-0076
+

stud2109-B19
£1.95 (£2.34 inc VAT)
OEM: 21-2109, S2109
Triumph /BSA Sump Plate Stud - OIF Models from 1971 Sump plate to frame stud 5/16" x 24TPI x 1" UNF OEM: 21-2109, S2109
+

7-32-ball-F4
£0.25 (£0.30 inc VAT)
OEM: S70-7, 60-2363, D2363, 70-8019, E8019
7/32" Ball Bearing - Single Ball - Universal Use Diameter: 7/32" (5.6mm) As used in all standard dual or 4 valve oil pump assemblies on Triumph pre unit...
+

wash0645-B18
£2.45 (£2.94 inc VAT)
OEM: 67-0645, 67-645
BSA Crankshaft Timing Side Washer - A7 and A10 From 1947 Onwards + All A50 and A65 Models Locates between the timing pinion and the oil pump worm drive...
+

c/s-tube3999-B13
£9.95 (£11.94 inc VAT)
OEM: 70-3999, E3999
Triumph Crankshaft Sludge / Oil Tube - 350/500cc Unit Twins Circa 1959-74 Crankshaft oil tube, sludge trap - correct fitment on 3TA, 5TA and T100 models...
+

filt063-BSA-B2
£6.95 (£8.34 inc VAT)
OEM: 19-4589
BSA B25, B25T, B25SS, B50 - (1971 on) Oil Filter Element Replacement paper oil filter element. Supplied with O ring. Available as standard or UK made -...

seal353t-B7
£12.95 (£15.54 inc VAT)
OEM: E4568, 70-4568, T1956, 57-1956, T3642, 57-3642, D3510, 60-3510, D3500, 60-3500, T3634, 57-3634, T3644, 57-3644
Oil Seal Set - Engine and Gearbox To suit Triumph T150, T160, 1968 - Contains: Contact point seal, Gearbox Seals (5 Speed Option x2), Gearbox final drive...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.