.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

pump-mor-13
£89.95 (£107.94 inc VAT)
OEM: 70-3072, E3072, GS326
Triumph Plunger Type Oil Pump - Pre Unit Models Circa 1949-62 - Made in England by Morgo A high performance dual plunger oil pump for pre unit 3T, 5T,...
+

shim0066-B18
£6.95 (£8.34 inc VAT)
OEM: 40-0065, 40-0066, 40-0069, 40-66, 40-69
BSA Crankshaft Shim Set - Unit Singles - C15, B25, B40, B44, B50 Also used to shim between the alternator and crankshaft on A50 and A65 models. Set of 5...
+

domenut1531-B13
£2.95 (£3.54 inc VAT)
OEM: 97-1531, H1531
Triumph Primary and Gearbox Cover Dome Nut - Unit 650cc Models Circa 1963-68 Chrome plated acorn nut used to secure both the primary chaincase cover and...
+

shim0671-B18
£6.95 (£8.34 inc VAT)
OEM: 67-0671, 67-671, 67-672, 67-677, 67-0672, 67-0677
BSA Crankshaft Shim Set - A10, A7 ID: 1+1/4" (31.5mm) OD: 1+11/16" (42.2mm) 2x 0.001" 2x 0.005" 1x 0.010" Made in England OEM: 67-0671, 67-671, 67-672,...
+

pillarbolt7680-B13
£1.95 (£2.34 inc VAT)
OEM: 70-7680, E7680
Triumph/BSA Contact Breaker Pillar Bolt - Various Models To secure the contact points set on side points models, also secures the points cover. Correct...
+

bigend211-B3
£18.95 (£22.74 inc VAT)
OEM: 70-3586, B2026M, E3586
Triumph Big End Bearing Shells Pre Unit and Unit 650cc Models + T140 and TR7 - 010 Triumph T120/TR6 (1956-75), T140/TR7 (1973-) Big End Shell Set. Also...
+

wash0644-B18
£1.25 (£1.50 inc VAT)
OEM: 67-0644, 67-644
BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards Half time pinion lockwasher as used on all A50 and A65 models from...
+

seal359-B7
£7.95 (£9.54 inc VAT)
OEM: 70-4568, 70-3379, 97-1168, E4568, E3379, H1168
Oil Seal Set - Engine and Gearbox - Triumph T20 Tiger Cub Models - 1963 Onwards Suitable for T20 Tiger Cub models circa 1963-1967. Kit contains: side...
+

pmp223
£239.95 (£287.94 inc VAT)
OEM: 65-2589, 65-2619
BSA Oil Pump Assembly - Pre Unit Singles - B, C and M Group Models Circa 1940-62 Complete oil pump suitable for B31, B32, B33, B34, M20, M21 C10L,...
+

pmp202H-B18
£69.95 (£83.94 inc VAT)
OEM: 70-9421, 70-3878, 70-6928, E9421, E3878, E6928
Triumph Unit Oil Pump - UK Made Dual plunger Triumph engine oil pump for 350cc, 500cc, 650cc and 750cc unit twins including: 3TA, 5TA, T90, T100, TR6,...
+

bear019-F4
£23.95 (£28.74 inc VAT)
OEM: 24-0724, 70-9974, 27-724, 24-724
Crankshaft Bearing BSA C15/B40 T/S - 1967 onwards. C25/B25/B44 T/S and D/S - Roller Type - 1967 onwards. B31/B33/B34 D/S (1946-59), B50 T/S & D/S -...
+

fkpipe035
£0.95 (£1.14 inc VAT)
Breather / Overflow Hose - 3.5mm Bore, 6mm Diameter - Black Rubber Carburettor overflow or breather pipe - s uitable for low pressure uses only. OD: 6mm...
+

bolt1872-B13
£2.95 (£3.54 inc VAT)
OEM: 21-1872, S1872
Triumph Timing Plug / Sump Plate Drain Bolt - Unit Singles and Twins from 1968 Onwards Timing aperture plug - correct fitment on various models...
+

pump-gkt-3910
£0.75 (£0.90 inc VAT)
OEM: 71-3910, E13910
Triumph Oil Pump Gasket - Unit Twins - 350/500/650/750cc From 1963-83 Suitable for models with 4 valve oil pump. Can also be used on 2 valve oil pumps as...
+

plug1112-B18
£4.95 (£5.94 inc VAT)
OEM: 57-1112, T1112
Triumph Gearbox Oil Drain and Level Plug - Unit 350/500/650cc Models Circa 1959-68 Correct fitment on 3TA, 5TA, T90, T100 models circa 1959-74 + 6T, T120...
+

wash0588
£0.45 (£0.54 inc VAT)
OEM: 68-0588, 71-4443, E14443
BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72 Rubber O ring seal for oil lines on A50 and A65 models from 1965-72. Also used between the...
+

valv570ss-B18
£39.95 (£47.94 inc VAT)
OEM: 71-3447, E5896, 70-5896
Oil Pressure Release Valve Fits Triumph T140 Bonneville motorcycle Can be used in some other models also Stainless Steel (Made in UK) OEM: 71-3447, E5896,...
+

filt582-SS-B3
£23.95 (£28.74 inc VAT)
OEM: 42-8334, 42-8426
BSA Oil Tank Filter - Pre Unit A, B and C Group Models - Circa 1954-63 Oil tank filter and drain plug. Correct fitment for BSA A7, A10, B31 and B33...
 

filt840m-B3
£10.95 (£13.14 inc VAT)
OEM: 70-3722, E3722
Oil Sump Filter Gauze - Triumph 350cc + 500cc Unit Twins Conical type, fits 350/500 unit construction models OEM: 70-3722, E3722
+

stud3114-B19
£2.95 (£3.54 inc VAT)
OEM: 70-3114, E3114
Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73 Drive side crankshaft to alternator rotor stud - later pre unit...
+

screw4255-brass-B13
£1.45 (£1.74 inc VAT)
OEM: 60-4255, D208-5, D4255
Triumph Brass Patent Plate Hammer Drive Rivet / Screw Set Set of three brass hammer drive rivets to secure the timing cover triangular name plate as used...
+

nut262-B18
£4.95 (£5.94 inc VAT)
OEM: 70-3905, E3905
Triumph T120/T110 650cc etc (-1968) Hexagonal crank Sludge Trap plug, CEI threads. OEM: 70-3905, E3905
+

nut3732-B13
£0.95 (£1.14 inc VAT)
OEM: 70-3732
Oil Pump Nut - 70-3732 Triumph Engine Oil Pump Nut, to secure oil pump to engine stud. OEM: 70-3732
+

spring3724-B13
£1.75 (£2.10 inc VAT)
OEM: 70-3724, E3724
Triumph Oil Sump Filter Retaining Spring - 350/500cc Models OD: 7/16" (10.6mm) Length uncompressed: 7/16" (10.8mm) OEM: 70-3724, E3724
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.