.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Upper

nut338-B14
£4.95 (£5.94 inc VAT)
OEM: 06-7827
BIG END NUT - Norton Commando, Atlas 650/750/850cc 3/8" cycle Norton Big end nut , Commando 750cc & 850cc, Atlas, 650/750/850cc. OEM: 06-7827
+

pist315
£275.95 (£331.14 inc VAT)
Pair of JP pistons for Triumph 3TA/T21 350cc (1957-66) Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 58.24mm Standard,...

pist288
£279.95 (£335.94 inc VAT)
Set of JP Pistons for BSA A10 Super Rocket 650cc models etc (1952-63). Supplied as 2 Pistons, complete with JP rings, gudgeon pins and circlips. Bore Size...

pist298
£269.95 (£323.94 inc VAT)
Set of JP Pistons for BSA A7 500cc models etc (1951-60). Supplied as 2 Pistons, complete with JP rings, gudgeon pins and circlips. Bore Size : 66mm...

pist301
£285.95 (£343.14 inc VAT)
Set of JP Pistons for BSA A50 500cc models etc (1962-64). Supplied as 2 Pistons, complete with JP rings, gudgeon pins and circlips. Bore Size : 65.5mm...

pist238
£241.95 (£290.34 inc VAT)
Pair of JP Piston for AJS 20 500cc or Matchless G9 500cc 1949-1955 Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 66mm...

pist511
£179.95 (£215.94 inc VAT)
One JP Piston for Ariel Red Hunter 500cc 1935-1946 Supplied as 1 Piston, complete with rings, gudgeon pin and circlips. Bore Size : 81.8mm Standard,...

pist259jp
£275.95 (£331.14 inc VAT)
Pair of JP Pistons for Norton Dominator 500cc models (1948-60). Supplied as 2 Pistons, complete with JP rings, gudgeon pins and circlips. Bore Size : 66mm...

pist263jp
£277.95 (£333.54 inc VAT)
Pair of JP Pistons for Norton Dominator 600/650cc models (1961-70). Supplied as 2 Pistons, complete with JP rings, gudgeon pins and circlips. Bore Size :...

valve085-B22
£16.95 (£20.34 inc VAT)
OEM: E4640, 70-4640
Triumph Tiger 90 (1963-65) Tiger 90 (1966-69) Inlet Valve (Alpha valve no.V232) OEM: E4640, 70-4640
+

smallend156-B8
£5.95 (£7.14 inc VAT)
OEM: SE141
Velocette Venom Small End Bearing Venom MSS 500cc (1954-69) OEM: SE141
+

smallend143-B8
£6.95 (£8.34 inc VAT)
OEM: SE51
Norton Singles Small End Bearing 350 / 500 / 600 Singles, models 50, 16H, ES2, 18, 19, Big 4 and model 1 (1933-63) OEM: S.E 51
+

valve113-B22
£16.95 (£20.34 inc VAT)
OEM: E6422, 70-6422
Triumph Triple 750cc Inlet Valve - 70-6422 Triumph Trident T150, BSA rocket 3 Inlet Valve. Alpha V270 Head Diameter: 1.530 Stem Diameter: 0.3100 Length:...
+

valv240-B17
£13.95 (£16.74 inc VAT)
OEM: 06-7070, NM22838, NM22839, 06-7822, 06-2726
Valve Spring Set - Norton Atlas, Dominator, Commando 750, Commando 850 (1962-) (Terry no. VS 720) This Valve spring set includes :- 4 inner springs (NM22839...
+

valve067-B22
£16.95 (£20.34 inc VAT)
OEM: 02-6041
AJS 31, Matchless G12 - Inlet Valve - 02-6041 AJS 31 650cc (1960-66) Matchless G12 650cc (1960-66) Inlet Valve Alpha V205 OEM: 02-6041
+

crod384H-B21
£129.95 (£155.94 inc VAT)
OEM: 71-3006
Triumph T140, TR7 Connecting Rod - 71-3006 Quality Con Rod, connecting rod, con-rod Triumph Connecting Rod, balanced, connects crankshaft to piston....
+

valve423-56-B22
£19.95 (£23.94 inc VAT)
OEM: 423-56, V75
Ariel Inlet Valve - 350cc NH, Red Hunter from 1956-59 - 423-56 Head Diameter: 1+9/16", 1.56" (39.7mm) Stem Diameter: 5/16", 0.31 (7.9mm) Length: 4+1/32",...
+

guideD3T-140-B17
£22.95 (£27.54 inc VAT)
OEM: D3T-140, G269PB
Norton Inlet/Exhaust Valve Guide - Model 19, 50 from 1935-58, 18, ES2, 500T from 1955-58 - D3T-140 Bronze valve guide Length: 2+3/16", 2.178 (55.3mm)...
+

guide127-B22
£7.95 (£9.54 inc VAT)
OEM: A3-140, G269
Norton Inlet/Exhaust Valve Guide - Model 18, ES2 from 1935-54 - A3-140 Length: 2+3/16", 2.178 (55.3mm) Diameter: 5/8", 0.63 (15.9mm) ID: 3/8", 0.37...
+

valve18737-B22
£31.95 (£38.34 inc VAT)
OEM: 18737, L13-142, V140
Norton Inlet & Exhaust Valve - Model 50 from 1955-63 - 18737, L13-142 Head Diameter: 1.600 Stem Diameter: 0.372 Length: 4.438 Made in England OEM:...
+

pist032-bsa
£124.95 (£149.94 inc VAT)
OEM: 70-9741
Set of Hepolite Pistons for BSA A75 Rocket 3 models (1968-76). Supplied as 3 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore Size :...

pipeGS273-unbent-B3
£18.95 (£22.74 inc VAT)
OEM: GS273, 70-1504, E1504, 70-0005
Triumph Front Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Unbent Exhaust rocker box oil drain pipe and banjo assembly to fit all...
+

p/rings-R26730
£94.95 (£113.94 inc VAT)
OEM: R26730, 06-7960, 06-7225
Genuine AE/Hepolite Piston Ring Set - Norton Commando 850cc Models Set of genuine NOS AE Auto Parts / Hepolite piston rings for Norton Commando 850cc...

smallend172-UK-B8
£4.95 (£5.94 inc VAT)
OEM: 70-4003, E4003, SE200
Triumph Small End Bearing - Unit 500cc Models Circa 1959-69 + 1968 TR25W Models - UK Made Connecting rod small end bush - correct fitment on 5TA and T100...
+

pist400
£174.95 (£209.94 inc VAT)
One JP Piston for AJS 18CS 500cc or Matchless G80CS 500cc 1956-59 Supplied as 1 Piston, complete with rings, gudgeon pin and circlips. Bore Size : 86mm...

crod385
£204.95 (£245.94 inc VAT)
OEM: 68-0053, 68-0649, 71-1105, 71-1106
BSA A65 (1964-) Connecting Rod Billeted Con Rod, made in USA Quality Connecting Rod, connects crankshaft to piston. Supplied with 3/8" A.R.P 2000...
+

liner330
£43.75 (£52.50 inc VAT)
Fits BSA A7 OHV, 500cc (1951-62). Made in England. Hepolite FS.2207 Bore size : 2.5984" (66mm) Outer Diameter : 2.750" Length : 5.6875" Allows you to...
+

liner331
£43.75 (£52.50 inc VAT)
Fits BSA A10 OHV, Golden Flash, Road Rocket, Super Rocket, Rocket Gold Star (1950-63). Made in England. Hepolite FS.2131 Bore size : 2.7555"(69.99mm)...
+

pist304
£144.95 (£173.94 inc VAT)
One JP Piston for BSA C25, B25 Gold Star 250SS, B25SS, Victor 250 B25T 250cc models etc (1967-71). Supplied as 1 Piston, complete with JP rings, gudgeon...

pist241
£219.95 (£263.94 inc VAT)
Pair of JP Piston for AJS 20 500cc or Matchless G9 500cc 1956-1959 Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 66mm...

pist308jp
£144.95 (£173.94 inc VAT)
One JP Piston for Norton Model 50 350cc models (1956-63). Supplied as 1 Piston, complete with JP rings, gudgeon pins and circlips. Bore Size : 71mm...

liner133
£34.95 (£41.94 inc VAT)
OEM: 03-2000
Norton Dominator 600cc/650cc Twin Cylinder Liner. Spigoted Spun Cast Liner OEM: 03-2000 Allows you to reline your cylinder block and fit standard size...
+

liner125
£34.95 (£41.94 inc VAT)
OEM: 05-0019, 04-9890
Norton Commando 750cc Twin Cylinder Liner. Spigoted Spun Cast Liner OEM: 05-0019, 04-9890 Allows you to reline your cylinder block and fit standard size...
+

tapp7195-B13
£22.95 (£27.54 inc VAT)
OEM: 70-7195
Triumph T140 Exhaust Tappet Guide Block, with oil feed Made In England Late Models T140 OEM: 70-7195
+

smallend151-B8
£5.95 (£7.14 inc VAT)
OEM: 67-0393, SE107
BSA A7 Small End Bearing - 67-0393 BSA A7, A7SS, (1951-62) OEM: 67-0393, SE107
+

smallend154-B8
£9.95 (£11.94 inc VAT)
OEM: 90-1385, SE134
BSA Bantam Small End Bearing - 90-1385 Bantam D5, D7 (1958-64) OEM: 90-1385, SE134
+

valve014
£12.95 (£15.54 inc VAT)
OEM: T2010
Norton Dominator 77, 88, 99 - Inlet Valve - T2010 Norton Dominator 77, 88, 99 (1949-59) Inlet Valve (Alpha valve no.V26) Head Diameter: 1.312 Stem...
+

vguide361-B22
£10.45 (£12.54 inc VAT)
OEM: 71-7201
Triumph T140 Bonneville, TR7 (1979-) Inlet valve Guide - 71-7201 One Valve Guide OEM: 71-7201
+

vguide362-B22
£10.45 (£12.54 inc VAT)
OEM: 71-7202, 71-7506
Triumph T140 Bonneville, TR7 (1979-) Exhaust valve Guide - 71-7202 One Valve Guide OEM: 71-7202, 71-7506
+

valve3988-B22
£32.95 (£39.54 inc VAT)
OEM: 01-3988, V55
AJS 18, 18S, 18C, 18CS, Matchless G80, G80S, G80CS - Inlet Valve - 01-3988 AJS 500cc models - 18, 18S, 18C, 18CS from 1949-59 Matchless 500cc models -...
+

valve441-55-B22
£20.95 (£25.14 inc VAT)
OEM: 441-55, V80
Ariel Exhaust Valve - VH, HS, VT Hunter from 1955-58 - 441-55 Head Diameter: 1+19/32", 1.59" (40.5mm) Stem Diameter: 3/8", 0.37 (9.4mm) Length: 4+1/16",...
+

valve116-B22
£19.95 (£23.94 inc VAT)
OEM: 71-1736, V273
BSA Exhaust Valve B50 from 1972 - 71-1735 Head Diameter: 1+7/32", 1.52 (38.7mm) Stem Diameter: 5/16", 0.31 (7.8mm) Length: 4+1/32", 4.02 (102mm) Alpha...
+

valve9120-B22
£29.95 (£35.94 inc VAT)
OEM: NM9120, V29, V141
Norton Inlet & Exhaust Valve - Big 4 and 16H Models from 1933-45 Head Diameter: 1.625 Stem Diameter: 0.342 Length: 5.240 Made in England OEM:...
+

rings0744
£29.95 (£35.94 inc VAT)
OEM: 65-0744, 65-0735, 65-744, 65-744
Piston Ring Set - BSA B31 - 350cc Single - Circa 1946-59 2x 3/32", 0.09" Piston rings - 1st and 2nd 1x 1/8", 0.13"  Piston ring - oil scraper Bore...

tapp6508
£29.95 (£35.94 inc VAT)
OEM: 70-6508, E6508, 71-3212, E13212
Triumph Drive Side Tappet Guide Block - 750cc Triples From 1968 Onwards - Single Hole Left hand / drive side single hole alloy tappet guide block for...
+

tapp6509
£29.95 (£35.94 inc VAT)
OEM: 70-6509, E6509, 71-3211, E13211
Triumph Timing Side Tappet Guide Block - 750cc Triples From 1968 Onwards - Two Hole Right hand / timing side twin hole alloy tappet guide block for...
+

valv220a-B17
£14.95 (£17.94 inc VAT)
OEM: 67-0439, 67-0440
Valve Spring Set - Ariel Huntmaster FH (1954-) Iron Head models (Terry no.VS 454) Valve Spring Set. Includes 4 inner springs (67-0440) and 4 outer springs...
+

otank3856
£132.95 (£159.54 inc VAT)
OEM: 82-3856, F3856
Triumph Oil Tank - Pre Unit 500/650cc Models Circa 1955-59 Oil tank with breather pipe located in the rear of the tank as used on 5T, TR5, 6T, T100 and...
+

vguide2300-B22
£25.95 (£31.14 inc VAT)
OEM: 71-2300, G542PB
BSA Bronze Inlet and Exhaust Guide - A65 OIF Models Circa 1971-72 Standard size inlet / exhaust valve guide - correct fitment on oil in frame A65 models...
+

stud1214-B19
£5.45 (£6.54 inc VAT)
OEM: 67-1214
BSA Cylinder Barrel Fixing Stud - A10 Models Circa 1958-62 Cylinder base stud as used on all later A10 models from 1958 onwards. Nine required per bike....
+

bolt6606-B19
£1.45 (£1.74 inc VAT)
OEM: 14-6606
1/4" UNC - 3/4" Cheese Head Screw - Triumph Unit Singles + 750cc Twins and Triples Posi-drive screw used on various Triumph models - rocker box cover on...
+

crod383-Billet
£204.95 (£245.94 inc VAT)
OEM: 70-9525, 70-3606
Triumph T100/T120 Pre Unit, T120 Unit ,TR6/T110 (1956-) Connecting Rod Billeted Con Rod, made in USA Quality Connecting Rod, connects crankshaft to piston....
+

crod380-Billet
£179.95 (£215.94 inc VAT)
OEM: 70-9740, 70-8777
Triumph T150, T160 + BSA A75 Connecting Rod Billeted Con Rod, made in USA Quality Connecting Rod, connects crankshaft to piston. OEM: 70-9740, 70-8777
+

crod381
£204.95 (£245.94 inc VAT)
OEM: 06-4896, NM25369
Norton Commando 750, 850 Connecting Rod Billeted Con Rod, made in USA Quality Connecting Rod, connects crankshaft to piston. R&R Con Rods are used in...
+

crod384-Billet
£204.95 (£245.94 inc VAT)
OEM: 71-3006
Triumph T140, TR7 Connecting Rod Billeted Con Rod, made in USA Quality Connecting Rod, connects crankshaft to piston. R&R Con Rods are used in top...
+

vvg410-B12
£99.95 (£119.94 inc VAT)
OEM: T2011, 06-3283, 06-4034, 06-3282, 06-5115
Norton Commando 750cc (1968-72) Complete valve guide set. Includes guides and valves. Valve Guides : Set of 4 Cast Iron Guides (T2011) Valves : Set of 4...
+

pist270
£275.95 (£331.14 inc VAT)
OEM: CP198, C.P.198, CP 198, E4670, 70-4670
Pair of JP Pistons for Triumph T21/T90 350cc (1957-66) Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 58.24mm Standard,...

pist273
£257.95 (£309.54 inc VAT)
Pair of JP Pistons for Triumph T100/TR5 500cc (1938-59) Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 63mm Standard,...

pist276
£224.95 (£269.94 inc VAT)
OEM: 70-4021, E4021, 18786, CP179
Pair of JP pistons for Triumph T100 500cc (1958-67) Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 69mm Standard,...

pist319
£274.95 (£329.94 inc VAT)
Pair of JP Pistons for Triumph 6T 650cc (1950-66) Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 71mm Standard, available...

pist038
£229.95 (£275.94 inc VAT)
Set of JP Pistons for BSA A65 Star 650cc models (1962-65). Supplied as 2 Pistons, complete with rings, gudgeon pins and circlips. Bore Size : 75mm...

pist278jp
£209.95 (£251.94 inc VAT)
OEM: 68-0784
Pair of JP Pistons for BSA A65 650cc models etc (1962-73). Supplied as 2 Pistons, complete with JP rings, gudgeon pins and circlips. Bore Size : 75mm...

pist311jp
£152.95 (£183.54 inc VAT)
Pair of JP Pistons for Norton Commando 850cc models (1973-77). Supplied as 2 Pistons, complete with JP rings, gudgeon pins and circlips. Bore Size : 77mm...

liner132
£34.95 (£41.94 inc VAT)
OEM: 01-7880
Norton Dominator 500cc Twin Cylinder Liner. Spigoted Spun Cast Liner OEM: 01-7880 Allows you to reline your cylinder block and fit standard size pistons,...
+

valve021-B22
£27.95 (£33.54 inc VAT)
OEM: E3146, 70-3146
Triumph 200cc Inlet Valve - 70-3146 Triumph T15, T20, T20C (1953-59) 200cc Inlet Valve (Alpha valve no.V48) Head Diameter: 1.130 Stem Diameter: 0.3110...
+

valve081-B22
£16.95 (£20.34 inc VAT)
OEM: 68-0156
BSA A65, Star Twin, Rocket, Lightning (1962-65) Inlet Valve - Hepolite - 68-0156 BSA A65, Star Twin, Rocket, Lightning (1962-65) Inlet Valve (Alpha valve...
+

valve069-B22
£16.95 (£20.34 inc VAT)
OEM: 02-3403
AJS 30, Matchless G11 - Inlet Valve - 02-3403 AJS 30 600cc (1957-59) Matchless G11 600cc (1957-59) Alpha V171 Inlet Valve OEM: 02-3403
+

valve063-B22
£12.95 (£15.54 inc VAT)
OEM: 17221
Norton Dominator 88, 99, 650cc - Inlet Valve - 17221 Norton Manxman Norton Dominator 88, 99, 650 (1960-66) Inlet Valve (Alpha valve no.V195) Head...
+

guide143-B22
£9.45 (£11.34 inc VAT)
OEM: T2011
AJS and Matchless 2 Cylinder - Valve Guide - T2011 AJS 33CSR Matchless G15 Inlet and Exhaust Valve Guide Alpha G454 OEM: T2011
+

pist9763
£329.50 (£395.40 inc VAT)
OEM: 70-9763
Set of Gandini Pistons +.020 for Triumph Trident T150/T160 750cc. Supplied as 3 Pistons, complete with rings, gudgeon pins and circlips. Bore Size :...
+

pist9741
£329.50 (£395.40 inc VAT)
OEM: 70-9741
Set of Gandini Pistons STD for Triumph Trident T150/T160 750cc. Supplied as 3 Pistons, complete with rings, gudgeon pins and circlips. Bore Size :...
+

valve258-B22
£16.95 (£20.34 inc VAT)
OEM: 67-0323
BSA A10 Inlet Valve - Hepolite - 67-0323 BSA A10 (1949-62) Inlet valve. OEM: 67-0323
+

pist315-gan
£229.95 (£275.94 inc VAT)
OEM: CP164, CP 164
Pair of Gandini pistons for Triumph 3TA/T21 350cc (1957-66) Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 58.24mm...

r/box3668-B4
£79.95 (£95.94 inc VAT)
OEM: 71-3668, E13668
Triumph Inlet Rocker Box - T140 / TR7 - 750cc Twins From 1974 Onwards Inlet side alloy rocker cover - correct fitment on T140 and TR7 models from 1974...
+

valve015a-B22
£16.95 (£20.34 inc VAT)
OEM: T2204
AJS 33, 33CRS, Matchless G15, G15CSR - Exhaust Valve - T2204 AJS 33, 33CSR 750cc Matchless G15, G15CSR, 750cc (Alpha valve no. V27) Head Diameter: 1.312...
+

pipeGS272-unbent-B3
£19.95 (£23.94 inc VAT)
OEM: GS272, 70-1503, E1503, 70-0004
Triumph Rear/Inlet Rocker Box Drain Pipe - Pre-Unit 500/650cc Models Circa 1938-62 - Unbent Inlet rocker box oil drain pipe and banjo assembly to fit all...
+

screw7028
£0.95 (£1.14 inc VAT)
OEM: 21-7028, S7028
Triumph Bracket to Carb Grub Screw - T140E and TSS Models With Twin MKII Amal Carbs Attaches to left hand carb to position the flat bracket that connects...
+

cov3671-B4
£12.95 (£15.54 inc VAT)
OEM: 71-3671, E13671
Triumph Tappet Inspection Cover - T140 and TR7 Models Circa 1974-85 Six hole rocker box inspection cover as used on the models listed from 1974 onwards....
+

vcup7203-B13
£4.45 (£5.34 inc VAT)
OEM: 71-7203, E17203
Triumph Valve Spring Bottom Collar / Cup - T140, TR7 and TSX Models - Circa 1979 Onwards Valve spring retaining collar, sits under the valve spring...
+

tappet1493-B13
£24.95 (£29.94 inc VAT)
OEM: 66-1493
BSA Inlet / Exhaust Cam Follower Tappet - B Group Circa 1946-60 + M Group Circa 1937-63 Exhaust and inlet tappet on B31, B32, B33, B34 models from 1946...
+

pist198
£124.95 (£149.94 inc VAT)
OEM: CP198, C.P.198, CP 198, E4670, 70-4670
Pair of Harris Pistons for Triumph T21/T90 350cc (1957-66) Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore Size : 58.25mm...

stud2920-B19
£1.95 (£2.34 inc VAT)
OEM: 70-2920, E2920
Triumph Inlet Manifold Stud - Pre Unit 6T and T110 Models - Circa 1950-62 Inlet manifold to cylinder head stud. Correct fitment on pre unit 6T models...
+

stud2972-B19
£1.95 (£2.34 inc VAT)
OEM: 70-2972, E2972
Triumph Inlet Manifold Stud - Pre Unit 500cc Models Circa 1952-59 - Long Type Long inlet manifold to cylinder head stud. Correct fitment on pre unit T100...
+

pist-JP-ES2
£169.95 (£203.94 inc VAT)
OEM: NM23175, A2-161, A2-164, 19776
Norton Piston - ES2, Model 18, 500T - Circa 1956-63 - JP Supplied as 1 piston, complete with rings, gudgeon pin and circlips. Flat head with valve...

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.