.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Upper

oring727H
£0.95 (£1.14 inc VAT)
OEM: 60-3548, 70-3253, E3253
Rocker spindle O Ring for Triumph 200, 350, 500, 650 and 750cc models This o-ring is the little sucker that you replace to stop that oil leak from the...

gask1577
£0.75 (£0.90 inc VAT)
OEM: 70-1577, E1577, 65-5800, E1564, 70-1564, 67-42, 67-0042, NT376
Triumph/BSA Fibre Washer - Sump Base Gasket, Rocker Box Gasket, Inspection Cap Fibre washer used extensively on Triumph and BSA models. Approximately...
+

anti-sump-tap-switch-mag
£54.65 (£65.58 inc VAT)
Anti Wet Sump Oil Pipe Tap With Switch - Magneto or Coil Ignition Systems A solution to a frequent problem of wet sumping. On many of the older classic...
 

seal237
£1.25 (£1.50 inc VAT)
OEM: 70-4752, E4752
Push rod cover tube square section seal for Triumph T120, T140 etc Suit some of the 650cc and 750cc engines Square Section Seal OEM: 70-4752, E4752
+

seal541
£1.25 (£1.50 inc VAT)
OEM: 70-3547, E3547
White silicone push rod 'O' ring Suit some of the 650cc engines Fits the 3TA, 5TA, T100 and other 350/500cc unit engines. Square section o-ring seal OEM:...
+

tapp731
£0.55 (£0.66 inc VAT)
OEM: 70-8782, 70-7563, E8782, E7563
Triumph Tappet Guide Block O Ring - 500/650/750cc Models  OD: 1" (25.4mm) ID: 7/8" (22.3mm) Thickness: 1/6" (1.9mm) Viton Rubber OEM:  70-8782,...
+

washer1335
£0.95 (£1.14 inc VAT)
OEM: 70-1335, E1335, 40-0159, 40-159
Triumph Copper Washer - Overhead Rocker Spindle / Timing Cover Plug Also used for the T140 oil in frame sump washer. OEM: 70-1335, E1335,  40-0159,...
+

gear007H-B4
£4.45 (£5.34 inc VAT)
OEM: 57-2166, 70-8231, E732, 70-0732
Triumph / BSA - Gearbox Inspection Plug / Chaincase Filler Cap - Singles, Twins and Triples BSA all unit singles chain case A50, A65. Triumph 3TA, 5TA,...
+

seal538
£1.25 (£1.50 inc VAT)
OEM: 70-7310, E7310
Push rod cover tube 'O' ring for Triumph T120, T140 etc Suit some of the 650cc and 750cc engines Also suits some of the later 350/500cc engines (confused? -...
+

nut036-B14
£0.75 (£0.90 inc VAT)
OEM: P0172A, S1-52, 21-7052, PO172A, PO-172A, 02-0046
Triumph Twin - Cylinder Base Nut - P0172A Also to secure top head stay to engine. 3/8" CEI OEM: P0172A, S1-52, PO172A, PO-172A, 02-0046
+

wash3751
£0.75 (£0.90 inc VAT)
OEM: 70-3751
Triumph Rocker Cover Inspection Cap Washer Triumph Unit models OEM: 70-3751
+

seal537
£1.25 (£1.50 inc VAT)
OEM: 71-1283
Push rod cover tube 'O' ring for Triumph T120, T140 etc Suit some of the 650cc and 750cc engines O - ring OEM: 71-1283
+

oil-tap3-B3
£15.95 (£19.14 inc VAT)
Wet Sumping, Anti Sump, Oil Pipe Tap A solution to a frequent problem of wet-sumping. On many of the older classic bikes, the oil pump and/or...
+

nut056H-B18
£3.95 (£4.74 inc VAT)
OEM: 70-1435
Triumph T120, TR6 etc Rocker spindle domed nut, as used on all Triumph 500,600cc twins up to (-1968). OEM: 70-1435
+

nut0879-B14
£1.25 (£1.50 inc VAT)
OEM: 82-0879, F879, GS662, 60-4264, 75-0053
1/4" x 26 TPI CEI Nut - Triumph Rocker Box Stud/Oil Tank Mounting + Other Uses Used extensively on many Triumph unit models. Rocker box stud nut on...
+

tapp176-B18
£1.75 (£2.10 inc VAT)
OEM: 71-3748, 40-0167, 99-0067
Valve split cotters - valve collet - Triumph, BSA Triumph 500cc, 650cc, 750cc, T100, T120, T140, T150, T160. BSA 250cc, 750cc, C15, A75 Rocket 3. Price per...
+

seal542
£1.45 (£1.74 inc VAT)
OEM: 70-1496, E1496
Triumph Bottom Push Rod Tube O Ring Seal - 70-1496 Bottom joint washer for various pre unit and unit 650cc twins. OD: 1+1/4" (31.4mm) ID: 15/16"...
+

wash2184
£0.95 (£1.14 inc VAT)
OEM: 82-2184, F2184, NM24252, 02-2138, 71-2598, 01-6213
Triumph / BSA / Norton - 3/8" Thick Plain Washer - Various Uses  As used extensively on various unit models - cylinder head bolts, frame parts + universal...
+

wash1575-B13
£0.75 (£0.90 inc VAT)
OEM: 70-1575, 40-0158, E1575, 40-158
Triumph/BSA Rocker Spindle Thrust Washer - Various Models As used on many BSA models including A7, A10,  A50, A65, B25, B44, B40 and C15. Plus...
+

rod2620-B17
£10.95 (£13.14 inc VAT)
OEM: 70-2620
Triumph Push Rod - 500/650cc Pre Unit and 650cc Unit Models From 1939-73 Correct fitment for all pre-unit Triumph 500/650cc models 5T, T100, 6T, T110,...
+

clip6869-B13
£1.45 (£1.74 inc VAT)
OEM: 70-6869, E6869, 67-0101, WE479, 40-0979
Triumph Piston Gudgeon Pin Circlips (2) - Pre Unit and Unit 500/650cc Models + Unit Singles Gudgeon wristpin circlip - correct fitment on: Pre unit and...
+

nut0103-B14
£0.95 (£1.14 inc VAT)
OEM: 37-0103, W103, 40-3226
1/4" x 26 CEI Nut - Various Uses on Pre Unit and Unit Triumph and BSA Models Used extensively for many applications including cylinder head, manifold...
+

wash9554
£0.35 (£0.42 inc VAT)
OEM: 70-9554, E9554
Triumph Intake Manifold Carburettor Insulating Rubbber Washer - 650/750cc Unit Twins Carburettor mounting washer to fit T120, TR6, T140, TR7 models from...
+

pipe3655-F3
£3.95 (£4.74 inc VAT)
OEM: 82-3655, 82-3182, F3655, F3182
Triumph Oil Filter Union Nut and Connector Pipe - Pre Unit and Unit Models - 1954 Onwards Pipe locates between the rubber oil feed pipe and the oil...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.