Engine & Transmission :: Clutch :: Clutch Parts

CODE: clutch1714-B23

Triumph Clutch Actuating Arm / Spoke - Short Type for 650cc Unit Models Circa 1963-67

£4.95 (£5.94 inc VAT)

OEM: 57-1714, T1714

Triumph Clutch Actuating Arm / Spoke - Short Type for 650cc Unit Models Circa 1963-67 Overall length : 1+11/16" (43mm) OD: 0.11" (2.7mm) OEM: 57-1714,...

Quantity:

+ −

CODE: clutch3646-B23

Triumph/BSA Clutch Needle Roller Thrust Washer - T150, T160 and A75 Models

£7.95 (£9.54 inc VAT)

OEM: 57-3646, T3646

Triumph/BSA Clutch Needle Roller Thrust Washer - T150, T160 and A75 Models Clutch thrust race as used on all 750cc triples from 1968 onwards. Locates...

Quantity:

+ −

CODE: clutch2215-B23

Triumph Outer Clutch Thrust Washer - T150 and T160 Trident Models

£7.45 (£8.94 inc VAT)

OEM: 57-2215, T2215

Triumph Outer Clutch Thrust Washer - T150 and T160 Trident Models Clutch shaft outer thrust washer as used on 750cc triples. Locates within the outer...

Quantity:

+ −

CODE: clutch4312-B18

BSA Clutch Spring Retaining Nut - M20, M21 and M33 Single Spring Clutch Models

£10.95 (£13.14 inc VAT)

OEM: 15-4312

BSA Clutch Spring Retaining Nut - M20, M21 and M33 Single Spring Clutch Models Locates over the mainshaft nut to secure the central clutch spring. Correct...

Quantity:

+ −

CODE: clutch117B-B23

Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Brass

£4.75 (£5.70 inc VAT)

OEM: 57-2526, T2526, 42-3199, T427, 57-0427

Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Brass Clutch spring adjuster nut as used on both pre unit and unit models. Triumph:...

Quantity:

+ −

CODE: gear3257-B23

BSA A50/A65 Clutch Cable Connector Assembly - Circa 1962-72

£15.95 (£19.14 inc VAT)

OEM: 68-3257

BSA A50/A65 Clutch Cable Connector Assembly - Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment to connect...

Quantity:

+ −

CODE: clutch1670-B23

Triumph T20 Clutch Spring Pin - Tiger Cub Models Circa 1962-67

£4.45 (£5.34 inc VAT)

OEM: 57-1670, T1670

Triumph T20 Clutch Spring Pin - Tiger Cub Models Circa 1962-67 Clutch spring stud as used on all T20 Tiger Cub + Super Cub and Bantam Cub models from 1962...

Quantity:

+ −

CODE: bolt2157-B23

Triumph Clutch Centre Bolt - 650/750cc Unit Twins from 1971-82

£0.95 (£1.14 inc VAT)

OEM: 21-2157, S2157

Triumph Clutch Centre Bolt - 650/750cc Unit Twins from 1971-82 Secures the clutch inner and outer plates to the clutch centre - correct fitment on later...

Quantity:

+ −

CODE: clutch0356-B23

Clutch Spring Stud Nut - Norton + AJS/Matchless AMC Models

£2.95 (£3.54 inc VAT)

OEM: 04-0356, 040356, A2/402

Clutch Spring Stud Nut - Norton + AJS/Matchless AMC Models Clutch stud to centre stepped nut as used on Norton and AJS/Matchless models fitted with an...

Quantity:

+ −

CODE: clutch3781-B24

BSA Clutch Spring Cup - All BSA Models Fitted with a 6 Spring Clutch

£4.95 (£5.94 inc VAT)

OEM: 66-3781

BSA Clutch Spring Cup - All BSA Models Fitted with a 6 Spring Clutch Correct fitment for all A, B M and C models fitted with a 6 Spring Clutch. OD:...

Quantity:

+ −

CODE: clutch14-2-8m-B23

Burman Clutch Spring Bolt/Stud - Various Models B52 Clutch

£3.95 (£4.74 inc VAT)

OEM: 14-2-8, 24-X-11

Burman Clutch Spring Bolt/Stud - Various Models B52 Clutch Correct fitment for many models fitted with a Burman clutch with 5 friction plates. OD:...

Quantity:

+ −

CODE: clutch1466H-B23

Triumph/BSA 4 Spring Clutch Pressure Plate With Threaded Adjuster Pin and Nut

£20.95 (£25.14 inc VAT)

OEM: 57-1466, T1466, 68-3226, 57-1256, T1256, 40-3230, GS662, 02-2395

Triumph/BSA 4 Spring Clutch Pressure Plate With Threaded Adjuster Pin and Nut Supplied as a complete assembly with threaded adjuster pin and nut. Correct...

Quantity:

+ −

CODE: clutch1669-B24

Triumph T20 Inner Clutch Spring Cup - Tiger Cub Models Circa 1962-67

£2.95 (£3.54 inc VAT)

OEM: 57-1669, T1669

Triumph T20 Inner Clutch Spring Cup - Tiger Cub Models Circa 1962-67 Inner clutch spring cup - locates within the clutch centre - as used on all T20 Tiger...

Quantity:

+ −

57-1539, T1539 - Triumph Clutch Operating Lever - Pre Unit 500/650cc Models Circa 1959-62

CODE: clutch1539-B23

Triumph Clutch Operating Lever - Pre Unit 650cc Models Circa 1959-62

£42.95 (£51.54 inc VAT)

OEM: 57-1539, T1539

Triumph Clutch Operating Lever - Pre Unit 500/650cc Models Circa 1959-62 Horizontal type clutch operating arm - cable to gearbox. Correct fitment on later...

Quantity:

+ −

043443, 04-3443 - Norton AMC Clutch Spider

CODE: clutch136

Norton AMC Clutch Spider - OEM: 04-3443

£89.95 (£107.94 inc VAT)

OEM: 04-3443

Norton AMC Clutch Spider Fits Norton, AJS, Matchless Depth of spline 19.16 mm Depth of thread 26.5 mm Outer registers - spline side, 1st 5.36 mm, 2nd...

Quantity:

+ −

CODE: clutch3787-B18

BSA Clutch Centre Nut - A, B and M Models Fitted with a 6 Spring Clutch

£16.95 (£20.34 inc VAT)

OEM: 66-3787

BSA Clutch Centre Nut - A, B and M Models Fitted with a 6 Spring Clutch Correct fitment for the following: A Group Swinging Arm models B Group - All...

Quantity:

+ −

CODE: clutch3235-B23

BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63

£57.95 (£69.54 inc VAT)

OEM: 42-3235

BSA 4 Spring Clutch Hub Centre - A and B Group Models Circa 1960-63 For use with a 4 spring non cush drive clutch, standard fit on later A7 and A10...

Quantity:

+ −

CODE: clutch0420-B23

Triumph Clutch Mainshaft Spacer / Washer - Pre Unit 350/500/650cc Models from 1946-52

£3.45 (£4.14 inc VAT)

OEM: 57-0420, T420

Triumph Clutch Mainshaft Spacer / Washer - Pre Unit 350/500/650cc Models from 1946-52 Clutch to mainshaft plain nut washer as used on 3T, T85, 5T, TR5,...

Quantity:

+ −

57-1574, T1574 - Triumph Clutch Operating / Push Rod - T100A and T100SS Models Circa 1960-63

CODE: clutch1574-B23

Triumph Clutch Operating / Push Rod - 5TA, T100A and T100SS Models Circa 1960-63

£6.95 (£8.34 inc VAT)

OEM: 57-1574, T1574

Triumph Clutch Operating / Push Rod - T100A and T100SS Models Circa 1960-63 Hardened steel clutch operating rod as used on 500cc models fitted with 6...

Quantity:

+ −

CODE: fkclutch127-B23

Clutch Spring Stud - Norton, AMC

£3.99 (£4.79 inc VAT)

OEM: 04-3441, 04-0484, NM23307

CLUTCH SPRING STUD - AMC, Norton Norton, AMC Clutch spring stud for pre-Commando models using the AMC clutch. (3 studs usually required per Clutch)...

Quantity:

+ −

CODE: clutch061-B23

Norton Commando, Clutch Distance Circlip - 06-8072

£0.99 (£1.19 inc VAT)

OEM: 06-8072

Norton Commando, Clutch Distance Circlip - 06-8072 OEM: 06-8072, 068072

Quantity:

+ −

060751, 06-0751 - Norton Commando Clutch Diaphragm Spring Circlip

CODE: clutch0751

Norton Commando Clutch Diaphragm Spring Circlip - 060751

£4.95 (£5.94 inc VAT)

OEM: 060751, 06-0751

Norton Commando Clutch Diaphragm Spring Circlip - 060751 Large double spring retaining circlip used on all Norton Commando models. OD: 6+1/2" (165mm) ID:...

Quantity:

+ −

CODE: clutch3203-B24

BSA/Triumph Clutch Spring Cup - Pre Unit and Early Unit Twins - Short Type

£3.45 (£4.14 inc VAT)

OEM: 42-3203, 57-1934, 57-0425, T425

BSA/Triumph Clutch Spring Cup - Pre Unit and Early Unit Twins - Short Type Correct fitment on many Triumph 350/500/650cc twins circa 1938-62. Also correct...

Quantity:

+ −

CODE: clutch1041-B23

Triumph 4 Paddle Clutch Spider - Pre Unit Models From 1953 Onwards + Unit 350/500cc Twins Circa 1958-63

£36.95 (£44.34 inc VAT)

OEM: 57-1041, T1041

Triumph 4 Paddle Clutch Spider - Pre Unit Models From 1953 Onwards + Unit 350/500cc Twins Circa 1958-63 Clutch shock absorber spider suitable for models...

Quantity:

+ −

CODE: clutch1928

Triumph Compete Clutch Assembly - 650cc Unit Models Circa 1963-72

£354.95 (£425.94 inc VAT)

OEM: 57-1928, T1928

Triumph Compete Clutch Assembly - 650cc Unit Models Circa 1963-72 Complete three spring / six plate 58 tooth duplex chain clutch assembly. Suitable for...

Quantity:

+ −

Clutch hub centre for Norton, AMC, AJS, Matchless 040366, 04-0366

CODE: clutch002-B23

Clutch Hub Centre - Norton, AMC, AJS, Matchless

£87.95 (£105.54 inc VAT)

OEM: 04-0366

Clutch hub centre for Norton, AMC, AJS, Matchless OEM: 040366, 04-0366

Quantity:

+ −

CODE: clutch3249-B23

BSA Clutch Spring Nut - A7, A10 Models - Plunger & Rigid + C Group with 3 Spring Clutch

£2.95 (£3.54 inc VAT)

OEM: 67-3249

BSA Clutch Spring Nut - A7, A10 Models - Plunger & Rigid + C Group with 3 Spring Clutch Correct fitment for all A Group models from 1960-62 fitted...

Quantity:

+ −

040365, 04-0365 - Norton/AMC Clutch Pressure Plate - 3 Spring

CODE: clutch128B

Norton/AMC Clutch Pressure Plate - 3 Spring - Singles and Lightweights

£35.95 (£43.14 inc VAT)

OEM: 040365, 04-0365

Norton/AMC Clutch Pressure Plate - 3 Spring - Singles & Lightweights AJS, Matchless, Norton clutch pressure plate to hold three clutch springs....

Quantity:

+ −

CODE: clutch3222-B23

Triumph/BSA Clutch Pressure Plate - 4 Spring - TR25W, C15, B40 + Early C25/B25 Models

£16.95 (£20.34 inc VAT)

OEM: 40-3222, 57-2728, T2728

Triumph/BSA Clutch Pressure Plate - 4 Spring - TR25W, C15, B40 + Early C25/B25 Models Steel clutch pressure plate for use with a 1/4" 26 TPI BSF push rod...

Quantity:

+ −

57-0455, 57-1551, T455, T1551 - Triumph 12" Clutch Push Rod - Pre Unit Models With 4 Plate Clutch - Circa 1946-58

CODE: clutch0455

Triumph 12" Clutch Push Rod - 500cc Pre Unit Models With 4 Plate Clutch - Circa 1946-58

£8.95 (£10.74 inc VAT)

OEM: 57-0455, 57-1551, T455, T1551

Triumph 12" Clutch Push Rod - Pre Unit Models With 4 Plate Clutch - Circa 1946-58 Hardened steel clutch operating rod - correct fitment on pre unit 5T,...

Quantity:

+ −

57-3941, T3941 - riumph/BSA Clutch Retaining Plate Tab Washer Set - T150, T160 and A75 Models Circa 1969-75

CODE: clutch3941-set-B18

Triumph/BSA Clutch Retaining Plate Tab Washer Set - T150, T160 and A75 Models Circa 1969-75

£4.95 (£5.94 inc VAT)

OEM: 57-3941, T3941

Triumph/BSA Clutch Retaining Plate Tab Washer Set - T150, T160 and A75 Models Circa 1969-75 Set of 3 clutch shock absorber retaining plate tab washers as...

Quantity:

+ −

CODE: clutch4435-early-B23

Triumph / BSA Early Type Complete Clutch Centre / Shock Absorber Assembly - 350/500/650cc Unit Twins

£119.95 (£143.94 inc VAT)

OEM: 57-1719, 68-3275

Triumph / BSA Early Type Complete Clutch Centre / Shock Absorber Assembly - 350/500/650cc Unit Twins Early type clutch centre with countersunk screws...

Quantity:

+ −

57-4590, 57-2156, 68-3305 - Triumph Clutch Pressure Plate - 3 Spring

CODE: clutch4590-B23

Triumph/BSA Steel Clutch Pressure Plate - 3 Spring - 3/8" Threaded Adjuster

£14.95 (£17.94 inc VAT)

OEM: 57-4590, T4590, 57-2156, T2156, 68-3305

Triumph/BSA Steel Clutch Pressure Plate - 3 Spring - 3/8" Threaded Adjuster Correct fitment on 500/650/750cc twins from 1966 onwards including T100, T120,...

Quantity:

+ −

CODE: clutch3234-B23

BSA / Triumph Clutch Centre Retaining Nut Distance Piece - Unit Singles Circa 1959-73

£8.95 (£10.74 inc VAT)

OEM: 40-3234, 57-2731, T2731

BSA / Triumph Clutch Centre Retaining Nut Distance Piece - Unit Singles Circa 1959-73 Clutch spacer washer - locates behind the mainshaft nut and lock...

Quantity:

+ −

CODE: clutch0423-B23

Triumph Clutch Spring Bolt - Pre Unit Models With 4 Friction Plate Clutch + 3TA Models

£2.45 (£2.94 inc VAT)

OEM: 57-0423, T423

Triumph Clutch Spring Bolt - Pre Unit Models With 4 Friction Plate Clutch + 3TA Models Short type clutch spring screwed pin. Correct fitment on 5T, TR5...

Quantity:

+ −

CODE: clutch356-B23

Triumph/BSA 4 Spring Billet Alloy Clutch Pressure Plate - Threaded Adjuster Type

£32.95 (£39.54 inc VAT)

OEM: 57-1466, 57-1466A, T1466

Triumph/BSA 4 Spring Billet Alloy Clutch Pressure Plate - Threaded Adjuster Type Suitable for many pre unit Triumph models - 3T, 5T, T100, TR5, 6T, T110,...

Quantity:

+ −

40-3210, 57-2721 - BSA Unit Singles Clutch Centre Front Retaining Plate

CODE: clutch628-B23

BSA Unit Singles Clutch Centre Front Retaining Plate - B25, B40, B44, B50, C15

£6.95 (£8.34 inc VAT)

OEM: 40-3210, 57-2721

BSA Unit Singles Clutch Centre Front Retaining Plate - B25, B40, B44, B50, C15 Clutch outer retaining plate as used on 4 plate clutches on BSA unit...

Quantity:

+ −

CODE: clutch2715-B23

Triumph/BSA Clutch Spider - Unit Singles - C15, B Group + TR25W

£16.95 (£20.34 inc VAT)

OEM: 57-2715, T2715, 41-3209

Triumph/BSA Clutch Spider - Unit Singles - C15, B Group + TR25W C15, B25, B40, B44, B50 and Triumph TR25W models. OEM: 57-2715, T2715, 41-3209

Quantity:

+ −

CODE: clutch4903-B23

Triumph Complete Clutch Assembly - T140 and TR7 Models Circa 1973-83

£354.95 (£425.94 inc VAT)

OEM: 57-4903, T4903, 57-7056, T7056

Triumph Complete Clutch Assembly - T140 and TR7 Models Circa 1973-83 Complete clutch assembly - 58 tooth triplex chain clutch sprocket/basket - 6 plate, 3...

Quantity:

+ −

57-3940, T3940 - Triumph/BSA Clutch Retaining Plate Tab Washer Set - T150, T160 and A75 Models Circa 1969-75

CODE: clutch3940-set-B23

Triumph/BSA Clutch Retaining Plate Tab Washer Bolts - T150, T160 and A75 Models Circa 1969-75

£1.95 (£2.34 inc VAT)

OEM: 57-3940, T3940

Triumph/BSA Clutch Retaining Plate Tab Washer Set - T150, T160 and A75 Models Circa 1969-75 Set of 6 2BA bolts to secure the clutch spider retaining plate...

Quantity:

+ −

CODE: clutch374-B23

Norton Commando Clutch Bearing Outer Circlip - 06-0754

£1.75 (£2.10 inc VAT)

OEM: 06-0754

Norton Commando Clutch Bearing Outer Circlip - 06-0754 OEM: 06-0754

Quantity:

+ −

060770, 06-0770 - Norton Commando Clutch Diaphragm Spring Plate

CODE: clutch0770-B23

Norton Commando Clutch Diaphragm Spring Plate - 060770

£55.95 (£67.14 inc VAT)

OEM: 060770, 06-0770

Norton Commando Clutch Diaphragm Spring Plate - 060770 Clutch diaphragm pressure plate as used on all Norton Commando models. OD: 6+5/16" (160mm) ID:...

Quantity:

+ −

CODE: clutch0375-B23

BSA Primary Chain Tensioner Blade Pivot Pin - A50 and A65 Models Circa 1965-72

£6.95 (£8.34 inc VAT)

OEM: 68-0375, 68-375

BSA Primary Chain Tensioner Blade Pivot Pin - A50 and A65 Models Circa 1965-72 Primary chain tensioner blade pivot pin - correct fitment on A50 and A65...

Quantity:

+ −

CODE: bear3717

Triumph Inner Clutch Thrust Bearing - T150 and T160 Trident Models

£18.95 (£22.74 inc VAT)

OEM: 57-3717, T3717, 76168

Triumph Inner Clutch Thrust Bearing - T150 and T160 Trident Models Clutch pull rod thrust bearing as used on all 750cc triples from 1968 onwards....

Quantity:

+ −

CODE: clutch345H-B23

Clutch Hub Centre - Triumph TRW 500, 5T, 3TA - 4 Plate Shock Absorber Type

£37.95 (£45.54 inc VAT)

OEM: 57-1037

Clutch Hub Centre - Triumph TRW 500, 5T, 3TA - 4 Plate Shock Absorber Type OEM: 57-1037

Quantity:

+ −

CODE: clutch104-B23

BSA Bantam Clutch Thrust Bearing - 90-1717

£7.95 (£9.54 inc VAT)

OEM: 90-1717

BSA Bantam Clutch Thrust Bearing - 90-1717 Needle bearing used in the clutch OEM: 90-1717

Quantity:

+ −

CODE: clutch3355-36-B23

Burman Clutch Centre - Ariel 350cc Singles Circa 1936-47 - 2 Friction Plates

£38.95 (£46.74 inc VAT)

OEM: 3355-36

Burman Clutch Centre - Ariel 350cc Singles Circa 1936-47 - 2 Friction Plates Clutch hub / centre with no boss suitable for early civilian NG and NH...

Quantity:

+ −

CODE: pin5088-B18

Triumph Primary Chain Tensioner Abutment - 750cc Twins From 1973 Onwards

£6.95 (£8.34 inc VAT)

OEM: 70-5088, E5088

Triumph Primary Chain Tensioner Abutment - 750cc Twins From 1973 Onwards Chain tensioner tie rod pivot pin - locates in the crankcase. Correct fitment on...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Clutch Parts

Bestsellers Bestsellers

Account Details

Quick Links

Feked.com

Feked Online