.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Clutch Parts

clutch043c-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1646, 68-3264
Clutch Cable Adjuster Sleeve /Rubber Boot For Triumph 650cc and 750cc models OEM: 57-1646, 68-3264, T1646
+

clutch4253-B18
£2.45 (£2.94 inc VAT)
OEM: 68-3218, 60-4253, S66-1, 21-0066
BSA / Triumph Clutch Hub To Mainshaft / Alternator Rotor Woodruff Key Clutch hub to gearbox mainshaft key, prevents the clutch hub turning on the shaft....
+

clutch189-B23
£2.95 (£3.54 inc VAT)
OEM: 57-0394, T394, 42-3206
ROLLERS - Triumph/BSA/Norton/AMC Clutch centre rollers for Triumph and BSA (late A10-A50/A65 Models) 1/4" x 6mm Price per pack of 10 rollers OEM:...
+

fkclutch109-B23
£0.95 (£1.14 inc VAT)
OEM: 57-1046, T1046, 42-3191
Triumph / BSA Clutch Locking Tab Washer - 350/500/650cc Twins Circa 1953-1967 BSA A50, A65, B31, B33 + Triumph 3TA, 3TA, 5T, TR5, T100, T110, 6T, TR6,...
+

fkclutch268-B23-UK
£5.95 (£7.14 inc VAT)
OEM: 57-3931, T3931, 68-3278
Triumph/BSA Clutch Thrust Washer - Bronze Faced - Later Unit 500/650cc Models Fits Triumph T100, TR6 and T120 models from 1970 onwards + BSA 3 spring...
 

clutch117S-B23
£3.45 (£4.14 inc VAT)
OEM: 57-2526, T2526, 42-3199, T427, 57-0427
Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Steel Clutch spring adjuster nut as used on both pre unit and unit models. Triumph:...
+

fkclutch116-B23
£2.45 (£2.94 inc VAT)
OEM: 57-0423A, 57-4754, 42-3189, T4754, T423A
Triumph/BSA Clutch Spring Bolt - Pre Unit and Unit Twins - 3 or 4 Spring Clutch Clutch spring bolt to fit many Triumph 350/500/650/750cc twins + later...
+

clutch3221-B23
£0.95 (£1.14 inc VAT)
OEM: 40-3221 57-2732, T2732
Triumph/BSA Clutch Tab Lockwasher - Unit Singles - C15, B Group + TR25W C15, B25, B40, B44, B50 and Triumph TR25W models. OEM:  40-3221 57-2732, T2732
+

clutch312H-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1723, T1723 68-3282, 57-1185, T1185
Small Clutch Cush Drive Rubber. BSA A50/A65, Triumph T100/T120/T140 3 and 4 Spring Clutch. Please note: These rubbers are a very tight fit in the cush...
+

clutch313H-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1722, 68-3281
Large Clutch Cush Drive Rubber. BSA A50/A65, Triumph T100/T120/T140. 3 Spring Clutch. Please note: These rubbers are a very tight fit in the cush drive, they...
+

nut1047-B23
£3.45 (£4.14 inc VAT)
OEM: 57-1047, T1047, 68-3030, 68-3300
Triumph / BSA Clutch Hub Mainshaft Nut - Circa 1953-67 Clutch centre nut for securing the clutch hub to the gearbox shaft. BSA A50, A65 + Triumph T90,...
+

wash1045-B23
£6.95 (£8.34 inc VAT)
OEM: 57-1045, T1045, 42-3190, 68-3025, 68-3169
Triumph / BSA Clutch Mainshaft Cupped Washer - 350/500/650cc Twins Circa 1953-1967 Clutch to mainshaft washer for models with a 3 or 4 spring clutch. BSA...
+

clutch3236-B23
£1.25 (£1.50 inc VAT)
OEM: 57-0524, 42-3236
Clutch Mainshaft Locking Tab Washer - Pre Unit Triumph / BSA A7 and A10 BSA A7/A10 models from 1959-63 with a 4 spring Triumph type non cush drive...
+

clutch219-B23
£4.45 (£5.34 inc VAT)
OEM: 57-2159, 68-3308, T2159
Triumph/BSA Clutch Adjusting Screw - 3/8" UNF Clutch adjuster screw/pin for Triumph T120, T140 and BSA A65 models. Use with our steel or billet alloy 3...
+

clutch037-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1736
Triumph T120, T140 Clutch Push Rod Length: 11+13/16" OD: 7/32" 0.219" OEM: 57-1736
+

clutch0433-B23
£3.95 (£4.74 inc VAT)
OEM: 02-0433, 2-433
BSA Clutch Woodruff Key - Adapter to Mainshaft - 6 Spring or Triumph Type 4 Spring Clutch Correct fitment on BSA A7 and A10 models circa 1954-1962 and B...
+

clutch1735-B23
£5.45 (£6.54 inc VAT)
OEM: 57-1735
Clutch Thrust Washer - Triumph/BSA  - Early Type with Locating Tabs Fits Triumph 500/650cc unit Twins up to 1969. Also fits BSA 500/650 twins with 3...
+

clutch565-B23
£4.95 (£5.94 inc VAT)
OEM: 70-9703, E9703, E4153, 70-4153
TENSION BLADE ADJUSTER NUT- Triumph Triumph T100, T120 Primary Tensioner adjuster sleeve nut. OEM: 70-9703, E9703, E4153, 70-4153
+

clutch1931H-B24
£3.95 (£4.74 inc VAT)
OEM: T1931, 57-1931, 68-3287, 42-3197, 57-0998
Triumph/BSA Clutch Spring Cup - 3 or 4 Spring - Pre Unit and Unit Models - 1951 Onwards To fit 3 spring AND 4 spring clutch plate hubs. Correct fitment...
+

clutch6061-B18
£8.95 (£10.74 inc VAT)
OEM: 70-6061, E4149, 70-4149, E6061
Triumph 650cc Duplex Chain Tensioner Blade - 70-6061 Also suitable for 350/500cc models Triumph Twins, primary chain tensioner blade. For duplex chains....
+

hub3929-B23
£37.95 (£45.54 inc VAT)
OEM: 57-3929, 68-3277, 57-1734, T1734, T418, 57-0418
Triumph/BSA Clutch Hub Sleeve - 650/750cc Unit Twins From 1963 Onwards This is the clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

nut0586-B23
£4.95 (£5.94 inc VAT)
OEM: 21-0586, S586
Triumph Clutch Centre Lock Nut - 350/500/650/750cc Unit Twins from 1968-83 9/16" UNF Thread x 18TPI - Self Locking OEM: 21-0586, S586
+

clutch046-B23
£2.95 (£3.54 inc VAT)
OEM: 57-0495, T495
Clutch Lever Rubber - Triumph - 57-0495, T495 Triumph Pre-Unit Clutch lever rubber boot. OEM: 57-0495, T495
+

clutch557-B23
£3.45 (£4.14 inc VAT)
OEM: 41-3215, 57-2748, 57-1146, 40-3219
BSA/Triumph Clutch Spring Nut - Unit Singles - C15, B25, B40, TR25W, T20 Fits BSA Unit singles, clutch spring nut. Fits BSA C15/B25/B40/B50 Also fits...
+

clutch6283-B18
£12.95 (£15.54 inc VAT)
OEM: 70-6283, E6283
Triumph Primary Chain Tensioner Blade - 350/500cc Unit Twins Circa 1961-74 Primary chain tensioner blade suitable for 3TA, T90, 5TA and T100 models. For...
+

clutch3910-B18
£12.95 (£15.54 inc VAT)
OEM: 65-3910
BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch Clutch bearing set of inner bearing race with ball bearings...
+

clutch0861-B23
£0.65 (£0.78 inc VAT)
OEM: 68-0861, 68-861
BSA Primary Chain Tensioner Screw Oil Seal Washer - A50 and A65 Models Circa 1965-72 Oil seal washer with rubber insert, locates over the adjuster screw -...
+

clutch1644-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1644, T1644
Triumph Clutch Cable Abutment - Earlier Unit Twins from 1963-67 Early BSF type with hollow body and no internal threads. Correct fitment on 6T, T120 and...
+

clutch0413-B23
£4.45 (£5.34 inc VAT)
OEM: 57-0413, T413
Triumph Clutch Operating Arm Adjusting Pin With Ball - Pre Unit 350/500/650cc Models Clutch lever adjusting pin with captive ball bearing - correct...
+

screw1040-B23
£0.95 (£1.14 inc VAT)
OEM: T1040, 57-1040
Triumph Clutch centre - Countersunk Screw - 57-1040 Screws for the clutch hub centre front plate OEM: T1040, 57-1040
+

clutch3813-B18
£6.45 (£7.74 inc VAT)
OEM: 66-3813
BSA Clutch Sleeve Cork Ring - M20 & M21 Single Spring Clutch Fits behind the clutch on the shaft - M20/M21 single spring clutch models. OD: 1+1/4"...
+

clutch3274
£8.95 (£10.74 inc VAT)
OEM: 42-3274
BSA 12" Clutch Push Rod - 4 Spring Clutch - A10 Super Rocket and RGS Models + Conversions Hardened steel clutch operating rod - correct fitment on A10 SR...
+

clutch553-B23
£1.95 (£2.34 inc VAT)
OEM: 57-2719, E9777
ROLLERS - Triumph/BSA/Villiers - 57-2719, 42-3206 Clutch Rollers for BSA and Triumph Unit singles. Also fits Villiers 9E,10E and 250cc A series...
+

clutch4435-B23
£119.95 (£143.94 inc VAT)
OEM: 57-4435, T4435
Triumph / BSA Complete Clutch Centre / Shock Absorber Assembly - Unit Twins - Three Spring Clutch Correct fitment on later T120, all T140 and TR7 models....
+

clutch1552S-B23
£8.95 (£10.74 inc VAT)
OEM: 57-1552, 57-0455B, T1552, T455B
Triumph Clutch Operating / Push Rod - Pre Unit Models With 5 Plate Clutch Circa 1950-62 Hardened steel clutch operating rod - correct fitment on pre unit...
 

clutch2063H-B23
£2.95 (£3.54 inc VAT)
OEM: 57-2063
Clutch Cable Abutment - Long Slotted Ferrule Type - Triumph Unit Twins 1963-70 Overall Length: 7/8" (22mm) Diameter: 7/16" (11mm) OEM: 57-2063
+

clutch0453-B23
£1.45 (£1.74 inc VAT)
OEM: 57-0453, T453, 60-4261
Triumph Clutch Operating Arm Adjusting Pin Lock Nut - Pre Unit 350/500/650cc Models Lock nut for use with the clutch pushrod adjuster screw as fitted to...
+

clutch1645-B23
£2.95 (£3.54 inc VAT)
OEM: 57-1645, T1645
Triumph Clutch Cable Abutment Adaptor / Ferrule - Unit Twins Circa 1961-71 + T150 Models Short type slotted ferrule for use with a standard clutch cable...
+

clutch3822-B18
£1.95 (£2.34 inc VAT)
OEM: 65-3822
BSA Clutch Centre / Mainshaft Nut Locking Washer - 6 Spring Clutch A, B, M and C Group Models Mainshaft nut locking washer as used on six spring A7,...
+

clutch1970-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1970, T1970
Clutch Push Rod - Triumph 5TA, T100 - 57-1970 Suit some 500cc Triumph models Length: 243mm approx C-Range OEM: 57-1970, T1970
+

clutch3911-B18
£22.95 (£27.54 inc VAT)
OEM: 65-3911
BSA Clutch Inner Bearing Race - 6 Spring Clutch - A Group Swinging Arm + B/C/M Group Models Clutch inner bearing twin track race with two grooves. OD:...
+

c/cable3475-B18
£2.95 (£3.54 inc VAT)
OEM: 70-3475, E3475
Clutch Cable / Outer Gearbox Cover Grommet - Triumph Unit 350/500cc Models Circa 1958-63 Rubber grommet locates on the top of the outer gearbox casing to...
+

clutch558-B23
£4.95 (£5.94 inc VAT)
OEM: 42-3108
BSA A & B Group swinging arm clutch push rods. BSA A7, A10, B31, B33 4 Spring Clutch models 1958- Length: 11+1/2" (292mm) OD:1/4" (6.4mm) OEM: 42-3108
+

wash4794-B18
£3.75 (£4.50 inc VAT)
OEM: 57-4794, 57-2279, T4794, T2279
Triumph Clutch Mainshaft Washer - 500/650/750cc Unit Twins from 1968 onwards OD: 1+3/8" (35mm) ID: 9/16" (14.5mm) Depth: 3/6" (5mm) OEM: 57-4794,...
+

clutch139-B23
£7.95 (£9.54 inc VAT)
OEM: 04-0386, 04-0387
Norton/AMC clutch cush drive rubber set Set of 6 cush drive rubbers rubbers  - three large and three small. OEM: 04-0386, 04-0387 Made in England
+

clutch3762-B18
£5.95 (£7.14 inc VAT)
OEM: 57-3762
Triumph T120/T140 cable abutment (threaded for screw in adjuster) OEM: 57-3762, T3762
+

clutch3267-B23
£4.95 (£5.94 inc VAT)
OEM: 42-3267
BSA Clutch Mainshaft Centre Nut -  A7 and A10 Models With 4 Spring Clutch Correct fitment on A7 and A10 models from 1959-63 fitted with a 4 spring...
+

clutch3872-B23
£15.95 (£19.14 inc VAT)
OEM: 65-3872
BSA Clutch Back Plate - 6 Spring A, B, C and M Group Models - Circa 1946-62 Correct fitment on all BSA models fitted with a six spring clutch - A7, A10,...
+

clutch0377-B23
£2.95 (£3.54 inc VAT)
OEM: 68-0377, 68-377
BSA Primary Chain Tensioner Adjuster Screw Cap Nut - BSA A50 and A65 Models Circa 1964-72 Threaded cap nut - locates on the bottom of the primary...
+

clutch1256-B23
£3.45 (£4.14 inc VAT)
OEM: 57-1256, T1256
Triumph Clutch Adjuster Pin - Unit 350/500/650cc Models Pre 1965 + T20 Tiger Cub Models Clutch pushrod adjuster screw - correct fitment on 3TA, 5TA and...
+

clutch1140-B23
£5.45 (£6.54 inc VAT)
OEM: 57-1140, T1140
Triumph Clutch Operating / Push Rod - T20 Tiger Cub Models From 1954 Onwards Hardened steel clutch operating rod - correct fitment on all T15 Terrier and...
+

clutch357-B23
£35.95 (£43.14 inc VAT)
OEM: 57-2156, T2156, 57-4590, T4590, 68-3305
Triumph/BSA Billet Alloy Clutch Pressure Plate - 3 Spring - 3/8" Threaded Adjuster Correct fitment on 500/650/750cc twins from 1966 onwards including...
+

clutch11-7-11-B23
£2.95 (£3.54 inc VAT)
OEM: 11-7-11
Burman Clutch Centre Retaining Nut - Various Models B52 Clutch Clutch centre mainshaft retaining nut. OD: 1+3/16" (30mm) ID: 5/8" 20 TPI Made in...
+

clutch3263-E12
£3.45 (£4.14 inc VAT)
OEM: 68-3263
BSA Clutch Cable Adapter / Stop - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable abutment and...
+

clutch9906-B23
£114.95 (£137.94 inc VAT)
Clutch hub complete Shock Assembly Triumph clutch hub centre complete, for unit and pre-unit Triumph This is the complete centre unit, including the...
+

clutch2062-B23
£2.95 (£3.54 inc VAT)
OEM: 57-2062
Clutch Cable Abutment - Short Slotted Ferrule Type - Triumph Unit Twins Pre 1968 Overall Length: 9/16" (14.5mm) Diameter: 7/16" (11mm) OEM: 57-2062, T2062
+

clutch3951-B24
£2.95 (£3.54 inc VAT)
OEM: 57-3951, 57-4121
BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1969-73 - Long Type Clutch spring cup for BSA singles - B50 and later C25/B25 + TR5W models...
+

fkclutch218-B23
£8.95 (£10.74 inc VAT)
OEM: 70-5085
TENSION BLADE - Triumph Triumph T140 primary chain tensioner blade. For Triplex Chain Chain Slipper, tensioner. OEM: 70-5085
+

clutch2368-B23
£0.75 (£0.90 inc VAT)
OEM: 60-2368, D2368
3/8" Ball Bearing - Single Ball - Universal Use 3/8" (10mm approx) diameter Suitable for use with Triumph Unit Twins fitted with a 3 ball Clutch...
+

clutch170-B23
£1.45 (£1.74 inc VAT)
OEM: 41-3212, 57-2723, 41-3211
BSA Unit Singles Clutch Cush Rubber - B25, B40, B44, B50, C15 Clutch cush rubber as used on 4 plate clutches on BSA unit singles circa 1959-70 + Triumph...
+

clutch0422-B23
£1.45 (£1.74 inc VAT)
OEM: 57-0422, T422
Triumph 4 Spring Clutch Pressure Plate Thrust Button - Pre Unit 350/500/650cc Models Circa 1946-62 Clutch push rod cup for all pre unit models with a 4...
+

hub3170-B23
£39.95 (£47.94 inc VAT)
OEM: 42-3170
BSA 4 Spring Clutch Hub Adaptor - Standard Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

trun5977-B18
£1.45 (£1.74 inc VAT)
OEM: 70-5977, E5977
Triumph Primary Chain Tensioner Blade Trunnion - 500/650cc Models Circa 1966-73 + T150 Models Correct fitment on T90 and T100 models circa 1966-67 + T120...
+

clutchhub-310-B23
£38.95 (£46.74 inc VAT)
OEM: G37-3
Clutch hub for the AJS, Matchless Heavyweight singles, 350cc, 500cc Burman 5 plate clutch hub Burman, AJS, Matchless Clutch Centre 5 plate for AMC...
+

clutch8310-B18
£26.95 (£32.34 inc VAT)
OEM: 70-8310, 68-0244
BSA Primary Chain Tensioner Blade - A50 and A65 Models Primary chain tensioner blade suitable for BSA unit twins. For Triplex chains - see related...
+

clutch1937-B23
£0.95 (£1.14 inc VAT)
OEM: 57-1937, T1937
Triumph Clutch Actuating Arm / Spoke Nut  - 350/500/650cc Unit Models OD: 1/4"" (6.4mm) OEM: 57-1937, T1937
+

hub3170A-B23
£49.95 (£59.94 inc VAT)
OEM: 42-3170A
BSA 4 Spring Clutch Hub Adaptor - Large Taper - A and B Group Models Circa 1954-63 Clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

clutch7033-B18
£16.95 (£20.34 inc VAT)
OEM: 57-7033, 57-3629, 57-4587, 58-0001
Triumph Clutch Operating Lever / Lifter Assembly - 650/750cc Unit Twins Circa 1968-85 Complete ready to fit clutch lever assembly, includes: clutch lever,...
+

clutch216H-B23
£1.25 (£1.50 inc VAT)
OEM: 57-4189, 40-3230
BSA B25, B44, B50 and C15 - Clutch centre adjuster screw. BSF threads. OEM: 57-4189, 40-3230
+

nut0421-B23
£5.45 (£6.54 inc VAT)
OEM: 57-0421, T421
Triumph Clutch Hub Mainshaft Nut - Pre Unit 350/500/650cc Models from 1937-52 Clutch centre nut for securing the clutch hub to the gearbox shaft. OD:...
+

clutch1925-B23
£35.95 (£43.14 inc VAT)
OEM: 57-1925, T1925
Triumph T20 Tiger Cub Billet Alloy Clutch Pressure Plate - Later Models From 1964 Onwards Clutch pressure plate CNC  manufactured in lightweight billet...
+

clutch192-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1472
Large Clutch cush rubber (4 spring models). Fits 5T, 6T, Tiger 110, T100 and T120 Bonneville. Price is for ONE (1) rubber, you will need 4 for the clutch...
+

fkclutch134-B23
£2.95 (£3.54 inc VAT)
OEM: 04-0389
CLUTCH SPRING NUT - AMC, Norton Norton, AMC clutch spring adjuster nut for models using pre-Commando AMC clutches 3 nuts usually required per clutch...
+

clutch0986H-B23
£25.95 (£31.14 inc VAT)
OEM: 57-0986, 42-3173, T986
Triumph/BSA 4 Spring Steel Clutch Pressure Plate - Thrust Button Type As used on many pre unit Triumph models - 3T, 5T, T100, TR5, 6T, T110, TR6 and...
+

hub3930-B23
£34.50 (£41.40 inc VAT)
OEM: 57-3930, T3930, 57-1751, 57-1386, T1386, T1751
Triumph Clutch Hub Sleeve - Unit 350/500cc Models From 1959 Onwards This is the clutch sleeve that fits on the gearbox shaft, and holds the clutch hub....
+

clutch3259-E12
£7.95 (£9.54 inc VAT)
OEM: 68-3259
BSA Clutch Cable Abutment - A50/A65 Models Circa 1962-72 Correct fitment on A50 and A65 models - used in conjunction with the cable connector assembly to...
+

clutch3784-B18
£3.45 (£4.14 inc VAT)
OEM: 57-3784, T3784
Triumph Clutch Cable Abutment - Later Unit 500cc Models Circa 1969-74 Later UNC type with hollow body and no internal threads. Correct fitment on T100...
+

clutch1945-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1945, T1945, 57-1640, T1640
Triumph Clutch Actuating Arm / Spoke -350/500cc Unit Models Overall length from threaded end to bend: 3+3/16" (81mm) OEM: 57-1945, T1945, 57-1640, T1640
+

clutch3643-B23
£9.95 (£11.94 inc VAT)
OEM: 57-3643, T3643
Triumph/BSA Clutch Shaft Needle Roller Bearing - T150, T160 and A75 Models Clutch shaft / hub needle race bearing as used on all 750cc triples from 1968...
+

clutch193-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1473, T1473, 57-1043, T1043
Small Clutch cush rubber (4 spring models). Fits 5T, 6T, Tiger 110, T100 and T120 Bonneville. Price is for ONE (1) rubber, you will need 4 for the clutch...
+

clutch3413-31-B18
£5.45 (£6.54 inc VAT)
OEM: 3413-31, 11-2-2, BUR23-X-3
Burman Clutch Spring Adjuster Nut - Various Models with B52 Clutch Correct fitment for many models fitted with a B52 Burman clutch. OD: 3/8" (9.3mm)...
+

clutch650-B23
£2.95 (£3.54 inc VAT)
OEM: 26-0650, 26-650
Clutch Rollers - BSA - 26-0650 - pack 10 Clutch centre rollers for BSA, duplex chain type BSA A7 and A10 early models with the 6-spring clutch and...
+

clutch1318-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1318, T1318
Triumph Small Clutch Rebound Rubber - T20 Tiger Cub Models From 1954 Onwards Small clutch shock absorber rebound rubber as used on all T15 Terrier and T20...
+

clutch1132-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1132, T1132
Triumph Large Clutch Cush Drive Rubber - T20 Tiger Cub Models From 1954 Onwards Large clutch shock absorber drive rubber as used on all T15 Terrier and...
+

clutch1712-B23
£1.45 (£1.74 inc VAT)
OEM: 57-1712, T1712
Triumph 3 Ball Mechanism Clutch Cone Spring - 650/750 Unit Twins Thrust Return Cone Spring - Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm...
+

clutch309-B23
£38.95 (£46.74 inc VAT)
OEM: 3355-96, M726
Burman Clutch Hub - Panther Heavyweight Singles - 5 Plate With Studs ID: 4+1/16" (103.1mm) Basket depth: 1+1/16" (26.9mm) Centre ID: 1+3/16" (30.5mm)...
+

clutch3218-B24
£3.45 (£4.14 inc VAT)
OEM: 40-3218, 57-1927, T1927
BSA/Triumph Clutch Spring Cup - 4 Spring - Unit Singles Circa 1959-68 - Short Type Clutch spring cup for BSA singles - C15, B40 + early B25 and TR5W...
+

clutch1554-B23
£2.95 (£3.54 inc VAT)
OEM: 57-1554, T1554
Triumph Clutch Operating Arm Screwed Peg - Pre Unit 500/650cc Models Circa 1958-62 Screwed peg that holds the clutch operating lever to the arm as fitted...
+

trun4148-B18
£1.75 (£2.10 inc VAT)
OEM: 70-4148, E4148
Triumph Primary Chain Tensioner Blade Trunnion - 350/500cc Models Circa 1960-74 Correct fitment on 3TA, 5TA and T100 models circa 1960-65 + 1968 onwards...
+

clutch355-B23
£32.95 (£39.54 inc VAT)
OEM: 42-3173, 42-3173A, 57-0986, T986
Triumph/BSA 4 Spring Billet Alloy Clutch Pressure Plate With Thrust Button Suitable for many pre unit Triumph models - 3T, 5T, T100, TR5, 6T, T110, TR6...
+

clutch7035-B18
£6.95 (£8.34 inc VAT)
OEM: 57-7035, T7035, 57-4589, T4589, 57-1711, 57-3761, T1711, T3761
Triumph Clutch Operating Actuator Thrust Plate - 650/750 Unit Twins Suits Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm OD: 1+13/16" (46mm)...
+

clutch7034-B18
£3.95 (£4.74 inc VAT)
OEM: 57-4588, 57-7034, 57-4441, T4588, T7034, T4441
Triumph Clutch Operating Lever - 650/750 Unit Twins Suits Triumph T120, T140 from 1972-78 with 3 Ball Clutch Lever Arm OEM: 57-4588, 57-7034, 57-4441,...
+

clutch3459-B18
£2.95 (£3.54 inc VAT)
OEM: 063459, 06-3459
Norton Commando Clutch Centre Tab Lockwasher - 063459 Clutch centre tab lockwasher as used on all Norton Commando models. Overall length: 1+7/8" (48mm)...
+

trun5087-B18
£1.95 (£2.34 inc VAT)
OEM: 70-5087, E5087
Triumph Primary Chain Tensioner Blade Trunnion - 750cc Twins From 1973 Onwards Correct fitment on T140 and TR7 models circa 1973-85. Length: 1+3/8"...
+

clutch0376-B23
£2.95 (£3.54 inc VAT)
OEM: 68-0376, 68-376
BSA Primary Chain Tensioner Blade Spacer - A50 and A65 Models Circa 1965-72 Primary chain tensioner blade spacer - correct fitment on A50 and A65 models...
+

clutch1714-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1714, T1714
Triumph Clutch Actuating Arm / Spoke - Short Type for 650cc Unit Models Circa 1963-67 Overall length : 1+11/16" (43mm) OD: 0.11" (2.7mm) OEM:  57-1714,...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.