.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Clutch Parts

clutch043c-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1646, 68-3264
Clutch Cable Adjuster Sleeve /Rubber Boot For Triumph 650cc and 750cc models OEM: 57-1646, 68-3264, T1646
+

clutch4253-B18
£2.45 (£2.94 inc VAT)
OEM: 68-3218, 60-4253, S66-1, 21-0066
BSA / Triumph Clutch Hub To Mainshaft / Alternator Rotor Woodruff Key Clutch hub to gearbox mainshaft key, prevents the clutch hub turning on the shaft....
+

clutch189-B23
£2.95 (£3.54 inc VAT)
OEM: 57-0394, T394, 42-3206
ROLLERS - Triumph/BSA/Norton/AMC Clutch centre rollers for Triumph and BSA (late A10-A50/A65 Models) 1/4" x 6mm Price per pack of 10 rollers OEM:...
+

fkclutch109-B23
£0.95 (£1.14 inc VAT)
OEM: 57-1046, T1046, 42-3191
Triumph / BSA Clutch Locking Tab Washer - 350/500/650cc Twins Circa 1953-1967 BSA A50, A65, B31, B33 + Triumph 3TA, 3TA, 5T, TR5, T100, T110, 6T, TR6,...
+

fkclutch268-B23-UK
£5.95 (£7.14 inc VAT)
OEM: 57-3931, T3931, 68-3278
Triumph/BSA Clutch Thrust Washer - Bronze Faced - Later Unit 500/650cc Models Fits Triumph T100, TR6 and T120 models from 1970 onwards + BSA 3 spring...
 

clutch117S-B23
£3.45 (£4.14 inc VAT)
OEM: 57-2526, T2526, 42-3199, T427, 57-0427
Triumph / BSA Clutch Spring Nut - Pre Unit and Unit Twins - Steel Clutch spring adjuster nut as used on both pre unit and unit models. Triumph:...
+

fkclutch116-B23
£2.45 (£2.94 inc VAT)
OEM: 57-0423A, 57-4754, 42-3189, T4754, T423A
Triumph/BSA Clutch Spring Bolt - Pre Unit and Unit Twins - 3 or 4 Spring Clutch Clutch spring bolt to fit many Triumph 350/500/650/750cc twins + later...
+

clutch3221-B23
£0.95 (£1.14 inc VAT)
OEM: 40-3221 57-2732, T2732
Triumph/BSA Clutch Tab Lockwasher - Unit Singles - C15, B Group + TR25W C15, B25, B40, B44, B50 and Triumph TR25W models. OEM:  40-3221 57-2732, T2732
+

clutch312H-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1723, T1723 68-3282, 57-1185, T1185
Small Clutch Cush Drive Rubber. BSA A50/A65, Triumph T100/T120/T140 3 and 4 Spring Clutch. Please note: These rubbers are a very tight fit in the cush...
+

clutch313H-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1722, 68-3281
Large Clutch Cush Drive Rubber. BSA A50/A65, Triumph T100/T120/T140. 3 Spring Clutch. Please note: These rubbers are a very tight fit in the cush drive, they...
+

nut1047-B23
£3.45 (£4.14 inc VAT)
OEM: 57-1047, T1047, 68-3030, 68-3300
Triumph / BSA Clutch Hub Mainshaft Nut - Circa 1953-67 Clutch centre nut for securing the clutch hub to the gearbox shaft. BSA A50, A65 + Triumph T90,...
+

wash1045-B23
£6.95 (£8.34 inc VAT)
OEM: 57-1045, T1045, 42-3190, 68-3025, 68-3169
Triumph / BSA Clutch Mainshaft Cupped Washer - 350/500/650cc Twins Circa 1953-1967 Clutch to mainshaft washer for models with a 3 or 4 spring clutch. BSA...
+

clutch3236-B23
£1.25 (£1.50 inc VAT)
OEM: 57-0524, 42-3236
Clutch Mainshaft Locking Tab Washer - Pre Unit Triumph / BSA A7 and A10 BSA A7/A10 models from 1959-63 with a 4 spring Triumph type non cush drive...
+

clutch219-B23
£4.45 (£5.34 inc VAT)
OEM: 57-2159, 68-3308, T2159
Triumph/BSA Clutch Adjusting Screw - 3/8" UNF Clutch adjuster screw/pin for Triumph T120, T140 and BSA A65 models. Use with our steel or billet alloy 3...
+

clutch037-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1736
Triumph T120, T140 Clutch Push Rod Length: 11+13/16" OD: 7/32" 0.219" OEM: 57-1736
+

clutch1735-B23
£5.45 (£6.54 inc VAT)
OEM: 57-1735
Clutch Thrust Washer - Triumph/BSA  - Early Type with Locating Tabs Fits Triumph 500/650cc unit Twins up to 1969. Also fits BSA 500/650 twins with 3...
+

clutch0433-B23
£3.95 (£4.74 inc VAT)
OEM: 02-0433, 2-433
BSA Clutch Woodruff Key - Adapter to Mainshaft - 6 Spring or Triumph Type 4 Spring Clutch Correct fitment on BSA A7 and A10 models circa 1954-1962 and B...
+

clutch565-B23
£4.95 (£5.94 inc VAT)
OEM: 70-9703, E9703, E4153, 70-4153
TENSION BLADE ADJUSTER NUT- Triumph Triumph T100, T120 Primary Tensioner adjuster sleeve nut. OEM: 70-9703, E9703, E4153, 70-4153
+

clutch1931H-B24
£3.95 (£4.74 inc VAT)
OEM: T1931, 57-1931, 68-3287, 42-3197, 57-0998
Triumph/BSA Clutch Spring Cup - 3 or 4 Spring - Pre Unit and Unit Models - 1951 Onwards To fit 3 spring AND 4 spring clutch plate hubs. Correct fitment...
+

clutch6061-B18
£8.95 (£10.74 inc VAT)
OEM: 70-6061, E4149, 70-4149, E6061
Triumph 650cc Duplex Chain Tensioner Blade - 70-6061 Also suitable for 350/500cc models Triumph Twins, primary chain tensioner blade. For duplex chains....
+

hub3929-B23
£37.95 (£45.54 inc VAT)
OEM: 57-3929, 68-3277, 57-1734, T1734, T418, 57-0418
Triumph/BSA Clutch Hub Sleeve - 650/750cc Unit Twins From 1963 Onwards This is the clutch sleeve that fits on the gearbox shaft, and holds the clutch...
+

nut0586-B23
£4.95 (£5.94 inc VAT)
OEM: 21-0586, S586
Triumph Clutch Centre Lock Nut - 350/500/650/750cc Unit Twins from 1968-83 9/16" UNF Thread x 18TPI - Self Locking OEM: 21-0586, S586
+

clutch046-B23
£2.95 (£3.54 inc VAT)
OEM: 57-0495, T495
Clutch Lever Rubber - Triumph - 57-0495, T495 Triumph Pre-Unit Clutch lever rubber boot. OEM: 57-0495, T495
+

clutch557-B23
£3.45 (£4.14 inc VAT)
OEM: 41-3215, 57-2748, 57-1146, 40-3219
BSA/Triumph Clutch Spring Nut - Unit Singles - C15, B25, B40, TR25W, T20 Fits BSA Unit singles, clutch spring nut. Fits BSA C15/B25/B40/B50 Also fits...
+

clutch6283-B18
£12.95 (£15.54 inc VAT)
OEM: 70-6283, E6283
Triumph Primary Chain Tensioner Blade - 350/500cc Unit Twins Circa 1961-74 Primary chain tensioner blade suitable for 3TA, T90, 5TA and T100 models. For...
+

clutch3910-B18
£12.95 (£15.54 inc VAT)
OEM: 65-3910
BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch Clutch bearing set of inner bearing race with ball bearings...
+

clutch0861-B23
£0.65 (£0.78 inc VAT)
OEM: 68-0861, 68-861
BSA Primary Chain Tensioner Screw Oil Seal Washer - A50 and A65 Models Circa 1965-72 Oil seal washer with rubber insert, locates over the adjuster screw -...
+

clutch1644-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1644, T1644
Triumph Clutch Cable Abutment - Earlier Unit Twins from 1963-67 Early BSF type with hollow body and no internal threads. Correct fitment on 6T, T120 and...
+

clutch0413-B23
£4.45 (£5.34 inc VAT)
OEM: 57-0413, T413
Triumph Clutch Operating Arm Adjusting Pin With Ball - Pre Unit 350/500/650cc Models Clutch lever adjusting pin with captive ball bearing - correct...
+

screw1040-B23
£0.95 (£1.14 inc VAT)
OEM: T1040, 57-1040
Triumph Clutch centre - Countersunk Screw - 57-1040 Screws for the clutch hub centre front plate OEM: T1040, 57-1040
+

clutch3813-B18
£6.45 (£7.74 inc VAT)
OEM: 66-3813
BSA Clutch Sleeve Cork Ring - M20 & M21 Single Spring Clutch Fits behind the clutch on the shaft - M20/M21 single spring clutch models. OD: 1+1/4"...
+

clutch3274
£8.95 (£10.74 inc VAT)
OEM: 42-3274
BSA 12" Clutch Push Rod - 4 Spring Clutch - A10 Super Rocket and RGS Models + Conversions Hardened steel clutch operating rod - correct fitment on A10 SR...
+

clutch553-B23
£1.95 (£2.34 inc VAT)
OEM: 57-2719, E9777
ROLLERS - Triumph/BSA/Villiers - 57-2719, 42-3206 Clutch Rollers for BSA and Triumph Unit singles. Also fits Villiers 9E,10E and 250cc A series...
+

clutch4435-B23
£119.95 (£143.94 inc VAT)
OEM: 57-4435, T4435
Triumph / BSA Complete Clutch Centre / Shock Absorber Assembly - Unit Twins - Three Spring Clutch Correct fitment on later T120, all T140 and TR7 models....
+

clutch1552S-B23
£8.95 (£10.74 inc VAT)
OEM: 57-1552, 57-0455B, T1552, T455B
Triumph Clutch Operating / Push Rod - Pre Unit Models With 5 Plate Clutch Circa 1950-62 Hardened steel clutch operating rod - correct fitment on pre unit...
 

clutch2063H-B23
£2.95 (£3.54 inc VAT)
OEM: 57-2063
Clutch Cable Abutment - Long Slotted Ferrule Type - Triumph Unit Twins 1963-70 Overall Length: 7/8" (22mm) Diameter: 7/16" (11mm) OEM: 57-2063
+

clutch0453-B23
£1.45 (£1.74 inc VAT)
OEM: 57-0453, T453, 60-4261
Triumph Clutch Operating Arm Adjusting Pin Lock Nut - Pre Unit 350/500/650cc Models Lock nut for use with the clutch pushrod adjuster screw as fitted to...
+

clutch1645-B23
£2.95 (£3.54 inc VAT)
OEM: 57-1645, T1645
Triumph Clutch Cable Abutment Adaptor / Ferrule - Unit Twins Circa 1961-71 + T150 Models Short type slotted ferrule for use with a standard clutch cable...
+

clutch3822-B18
£1.95 (£2.34 inc VAT)
OEM: 65-3822
BSA Clutch Centre / Mainshaft Nut Locking Washer - 6 Spring Clutch A, B, M and C Group Models Mainshaft nut locking washer as used on six spring A7,...
+

clutch1970-B23
£4.95 (£5.94 inc VAT)
OEM: 57-1970, T1970
Clutch Push Rod - Triumph 5TA, T100 - 57-1970 Suit some 500cc Triumph models Length: 243mm approx C-Range OEM: 57-1970, T1970
+

clutch3911-B18
£22.95 (£27.54 inc VAT)
OEM: 65-3911
BSA Clutch Inner Bearing Race - 6 Spring Clutch - A Group Swinging Arm + B/C/M Group Models Clutch inner bearing twin track race with two grooves. OD:...
+

c/cable3475-B18
£2.95 (£3.54 inc VAT)
OEM: 70-3475, E3475
Clutch Cable / Outer Gearbox Cover Grommet - Triumph Unit 350/500cc Models Circa 1958-63 Rubber grommet locates on the top of the outer gearbox casing to...
+

clutch558-B23
£4.95 (£5.94 inc VAT)
OEM: 42-3108
BSA A & B Group swinging arm clutch push rods. BSA A7, A10, B31, B33 4 Spring Clutch models 1958- Length: 11+1/2" (292mm) OD:1/4" (6.4mm) OEM: 42-3108
+

wash4794-B18
£3.75 (£4.50 inc VAT)
OEM: 57-4794, 57-2279, T4794, T2279
Triumph Clutch Mainshaft Washer - 500/650/750cc Unit Twins from 1968 onwards OD: 1+3/8" (35mm) ID: 9/16" (14.5mm) Depth: 3/6" (5mm) OEM: 57-4794,...
+

clutch3762-B18
£5.95 (£7.14 inc VAT)
OEM: 57-3762
Triumph T120/T140 cable abutment (threaded for screw in adjuster) OEM: 57-3762, T3762
+

clutch139-B23
£7.95 (£9.54 inc VAT)
OEM: 04-0386, 04-0387
Norton/AMC clutch cush drive rubber set Set of 6 cush drive rubbers rubbers  - three large and three small. OEM: 04-0386, 04-0387 Made in England
+

clutch3267-B23
£4.95 (£5.94 inc VAT)
OEM: 42-3267
BSA Clutch Mainshaft Centre Nut -  A7 and A10 Models With 4 Spring Clutch Correct fitment on A7 and A10 models from 1959-63 fitted with a 4 spring...
+

clutch3872-B23
£15.95 (£19.14 inc VAT)
OEM: 65-3872
BSA Clutch Back Plate - 6 Spring A, B, C and M Group Models - Circa 1946-62 Correct fitment on all BSA models fitted with a six spring clutch - A7, A10,...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.