.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Electrical

sw-part5687-A4
£14.95 (£17.94 inc VAT)
OEM: 82-5687, 82-5413, 57-1076, 82-4717, F5687, F5413, F4717, T1076
Lucas Slide Type Rear Brake Light Switch Fitting Kit - Triumph Unit 350/500cc Models Circa 1963-68 Brake rod to stop light switch lever assembly,...
+

lamp235-A7
£23.95 (£28.74 inc VAT)
Sparto Style Rear/Tail Light With Number Plate Mount Cast, polished alloy rear lamp assembly with rubber gasket and round lens. Ideal for cafe racers and...
+

horn073
£22.95 (£27.54 inc VAT)
OEM: 703339, 145491, 145481
Altette Horn - Replacement Bezel, Domed Nuts and Corrugated Tone Disc Replica Lucas Altette horn replacement bezel and tone disc kit. Set includes a...
+

horn103
£8.95 (£10.74 inc VAT)
12 Volt Horn - Black - Universal Fit With Single Hole Mounting Bracket 12v classic style horn - black satin finish with  two spade terminals....
+

horn102
£8.95 (£10.74 inc VAT)
6 Volt Horn - Black - Universal Fit With Single Hole Mounting Bracket 6v classic style horn - black satin finish with  two spade terminals. OD:...
+

horn046
£53.95 (£64.74 inc VAT)
OEM: 54068060, 6H
6 Volt Lucas 6H Horn - Black Satin Finish Replica 6v Lucas 6H type horn - black cast iron body with integral mounting bracket. Two flat terminals....
+

horn070
£8.95 (£10.74 inc VAT)
OEM: 701686
Lucas Altette Horn Mounting Bracket With 90 Degree Bend Manufactuered in 1/8" thick steel with 90° bend - painted gloss black. Between mounting holes...
+

a/horn-12V-C
£84.95 (£101.94 inc VAT)
OEM: HF1234
12 Volt Altette Horn - Black Corrugated Tone Disc and Chrome Bezel Corrugated disc type typically used on various models circa 1954 onwards. Replica...
+

capac506-A15
£5.45 (£6.54 inc VAT)
OEM: 54483155, 06-1628
2MC Ignition Capacitor Mounting Spring - Horizontal Type Mounts the capacitor to the frame. Triumph TR5T and Norton Commando 850cc Models +  used on...
+

elec458-A15
£5.45 (£6.54 inc VAT)
OEM: 063909, 06-3909, 062055, 06-2055
Warning Light Assimilator Mounting Spring - Norton Commando 750/850cc Models Mounts the ignition warning light simulator to the frame. Norton Commando...
+

capac442-A15
£4.95 (£5.94 inc VAT)
OEM: 54483156, 99-0778, 06-1628, 82-8320
2MC Ignition Capacitor Mounting Spring - Vertical Type Mounts the capacitor to the frame, as fitted to various models with battery-less ignitions. BSA...
+

flash3614-A20
£3.95 (£4.74 inc VAT)
OEM: 60-3614, D3614, 19-1353, 54386637
Flasher Unit Support Spring - 2 Pin Lucas 12v 35048 Flasher Unit Correct fitment on various unit models circa 1971-79 including: BSA B25, B50, A65, A70...
+

ign7123-A4
£1.95 (£2.34 inc VAT)
OEM: 97-7123, H7123
Rubber Ignition Key Cap - Tumbler Type Barrel Ignition Switch - Later 750cc Twins Fits over the key, for use on Lucas tumbler type ignition - 54531899....
+

zener2237
£17.95 (£21.54 inc VAT)
OEM: 97-2237, H2237
Zener Diode Radial Heat Sink - 350/500/650cc Unit Twins + Triples From 1968 Onwards Alloy finned heat sink plug/ diode housing as fitted to T90, T100,...
+

sw085-UK-B18
£9.95 (£11.94 inc VAT)
OEM: PS5320/6, 60-2133, D2133, 19-6504, 5300/1/07
Triumph/BSA Oil Pressure Switch - Smiths Type With Taper Thread As fitted to unit A50, A65, T120, TR6, T90, T100 models circa 1969-73. Also used on some...
+

sw086-PREM-B18
£9.95 (£11.94 inc VAT)
OEM: 60-3719, D3719, 19-6508, PS5330/1/03
Triumph Oil Pressure Switch Triumph - Veglia Type With Straight / Parallel Threads As fitted to later T100 + T140, TR7, TSS, TSX, T150 and T160 models...
 

lit7054-BLU-R-A4
£3.95 (£4.74 inc VAT)
OEM: 99-7054, SPB392, 54361250
Blue Lucas Headlight Warning Light - Round or Jewel Type Supplied with bulb holder - 2 lucar terminals. Hole diameter required approximately 1/2"...
 

lit1207-AMB-R-A4
£3.95 (£4.74 inc VAT)
OEM: 99-1207, 54363453, 38190, SPB391
Amber Lucas Headlight Warning Light - Round or Jewel Type Supplied with bulb holder - 2 lucar terminals. Hole diameter required approximately 1/2"...
 

lit1208-RED-R-A4
£3.95 (£4.74 inc VAT)
OEM: 99-1208, 99-0568, 54363454, 38189, SPB389
Red Lucas Headlight Warning Light - Round or Jewel Type Supplied with bulb holder - 2 lucar terminals. Hole diameter required approximately 1/2"...
 

fkmag058-A17
£3.95 (£4.74 inc VAT)
OEM: 498339, LU498339
Lucas Magneto Auto Advance Unit Disc Cover Washer Large dished washer that sits between the auto advance C clip and extraction bolt. ATD - automatic...
+

lit1209-GRN-R-A4
£3.95 (£4.74 inc VAT)
OEM: 99-1209, 99-0569, 54363455, 38191, SPB390
Green Lucas Headlight Warning Light - Round or Jewel Type Supplied with bulb holder - 2 lucar terminals. Hole diameter required approximately 1/2" (12mm)....
 

wiring126-lucas
£74.95 (£89.94 inc VAT)
OEM: LU54935175, 54935175, 06-8061
Norton Main Wiring Harness - 750cc Atlas and 650SS Models Circa 1964-67 - Genuine Lucas Complete wiring loom suitable for Norton 750cc Atlas and 650SS...
+

fkmag051-A17
£10.95 (£13.14 inc VAT)
OEM: 458367, LU458367
Lucas Magneto Left Hand Pick Up Assembly - K2F and KVF - Clip On - Vertical 90° Cable Exit Supplied with acorn nut, brass lead washer, fibre washer and...
+

fkmag050-A17
£10.95 (£13.14 inc VAT)
OEM: 458367, LU458367
Lucas Magneto Right Hand Pick Up Assembly - K2F and KVF - Clip On - Vertical 90° Cable Exit Supplied with acorn nut, brass lead washer, fibre washer and...
+

wiring081-lucas
£55.95 (£67.14 inc VAT)
OEM: L54959532, 19-1096
Genuine Lucas Electric Box To Headlamp Wiring Harness - BSA B25 / B50 + Triumph T25 Models Circa 1971 Suitable for B25, B50 and T25 models fitted with an...
+

wiring088-lucas
£59.95 (£71.94 inc VAT)
OEM: LU54959480, 54959480
BSA/Triumph - B25, B50 and T25 - Genuine Lucas Main Wiring Harness Complete wiring loom suitable for BSA B25 and B50SS models circa 1971-73 + Triumph T25...
+

off-ign-cub-brk
£657.95 (£789.54 inc VAT)
Triumph Cub Start - Complete Bolt On PVL Electronic Ignition System With Primary Chain Tensioner - Newly Developed and Unique to Feked Off - Suit later...
+

fkmag052-A17
£10.95 (£13.14 inc VAT)
OEM: 458865, LU458865
Lucas Magneto Right Hand Pick Up Assembly - K2F Magnetos - Clip On - 45° Cable Exit Supplied with acorn nut, brass lead washer, fibre washer and carbon...
+

fkmag053-A17
£10.95 (£13.14 inc VAT)
OEM: 458866, LU458866
Lucas Magneto Left Hand Pick Up Assembly - K2F Magnetos - Clip On - 45° Cable Exit Supplied with acorn nut, brass lead washer, fibre washer and carbon...
+

mag477-A17
£33.95 (£40.74 inc VAT)
OEM: MDGB, 67-0540, 67-540
Manual Advance Magneto Pinion / Drive Gear - BSA A7 and A10 Models - Alloy Correct fitment on many BSA A7 and A10 models circa 1950-62, fitted with a...
+

fkmag061-A17
£4.95 (£5.94 inc VAT)
OEM: 498303, LU498303
Lucas Magneto Auto Advance Unit Fixing Sleeve Nut - Long Type Long type as used on most Lucas auto advance units. With internal and external thread....
+

fkmag060-A17
£4.95 (£5.94 inc VAT)
OEM: 498299, LU498299
Lucas Magneto Auto Advance Unit Fixing Sleeve Nut - Short Type Short type as used on Lucas 47506A auto advance units, as fitted to some Ariel models....
+

fkmag059-A17
£1.95 (£2.34 inc VAT)
OEM: 498131, LU498131
Lucas Magneto Auto Advance Unit Cover Clip 'C' washer that sits under the auto advance extraction bolt. ATD - automatic timing device OEM: 498131,...
+

bulb244-A13
£0.75 (£0.90 inc VAT)
OEM: LLB244, 244
Bulb 6v 10w Ba15s - SCC, LLB 244 6v clear bulb, single filament bayonet type with single contact. 15mm diameter base. Also Known as  LLB244, Lucas 244
+

sw380459-A4
£1.95 (£2.34 inc VAT)
OEM: 380459
Rubber Pad for Lucas 31563 Type Horn/Dip Switch Replacement rubber pad as used on Lucas handlebar clamp mounted switches. Lucas type 31563, 19-0706...
+

dyn465-A20
£7.95 (£9.54 inc VAT)
OEM: LU200354, 200354
Lucas E3H, E3HM Dynamo Commutator End Cover With Central Hole - Bakelite Replica Lucas black bakelite dynamo end cap as fitted to E3H and E3HM dynamos....
+

wire1700-9mm-T10
£5.95 (£7.14 inc VAT)
9mm Width
Black Fabric Adhesive Tape - Wiring Harness + Universal Use - 9mm or 19mm x 20m Solvent free therefore ideal for use with PVC wiring. Resistant to...
 

wire2501-T10
£11.95 (£14.34 inc VAT)
Self Amalgamating Elastic Tape - Wiring Harness + Universal Use - 25mm x 10m Strong self amalgamating polyisobutylene elastic tape which when wrapped...
+

fklit159-A4
£2.45 (£2.94 inc VAT)
OEM: 862217
Headlight Headlamp Wiring Rubber Grommet Approx 1+3/4" diameter, will fit the headlight holes of approx 1+5/8" OEM 862217
+

rub923-A4
£5.95 (£7.14 inc VAT)
OEM: LU54524048, 19-1349, 99-1026
Headlamp Headlight Rubber Grommet for Flat back Shells As fitted to BSA A65, A70, R3 and Triumph T120, TR6, T150 models. OEM: LU54524048, 19-1349, 99-1026
+

beam160m-B1
£20.95 (£25.14 inc VAT)
OEM: 552507
Headlamp 5+3/4" Miller Type Beam Unit - BPF type - with Pilot Aperture Uses a BPF headlight bulb holder. Supplied with a bulb and pilot bulb holders. As...
+

reg124L-A8
£34.95 (£41.94 inc VAT)
12v Lucas Regulator/Rectifier - Three Phase - Solid State Economical replacement for Lucas rectifier and zener diode Will work with either negative or...
+

mag433-A17
£2.75 (£3.30 inc VAT)
OEM: LU463114, 463114
Replica Lucas Mag/Dyno Clutch Star Spring Washer Dynamo clutch star friction spring as used in many Lucas magdynos including MO1, MO1L, MN, MS etc. ID:...
+

fksw114-A9
£24.95 (£29.94 inc VAT)
OEM: 31340, LU31340, U39
Replica Lucas U39 Light Switch - Off / Low / High Used with many models that have a DC magneto ignition. Short knob type. Hole size required:...
+

dyn405-split-A17
£4.75 (£5.70 inc VAT)
OEM: 188818, LU188818
Lucas Dynamo Bullet Connectors - Brass Bullet or Split Type - Pack of 6 Bullet connectors for the dynamo and voltage control box. 2 required for the...
 

cap017-A23
£2.95 (£3.54 inc VAT)
Red Spark Plug Cap - Rubber - Non Resistor Plain red rubber spark plug cap. HT lead screws into the end and secured by clip. Recommended for Magneto type...
+

dyn431A-A20
£10.95 (£13.14 inc VAT)
OEM: LU200918, 200918
Replica Lucas E3L Dynamo End Cap / Cover - Wire Exit 11 O'Clock - Top Left Dynamo commutator end cover assembly as used on later E3L dynamos. The cable...
+

dyn431-A20
£10.95 (£13.14 inc VAT)
OEM: LU200902, 200902
Replica Lucas E3L Dynamo End Cap / Cover - 5 O'Clock Wire Exit - Bottom Right Dynamo commutator end cover assembly as used on later E3L dynamos. The...
+

mag203-A17
£19.95 (£23.94 inc VAT)
OEM: C2/117
Norton Magneto mounting plate OEM: C2/117
+

fklens058L
£3.95 (£4.74 inc VAT)
OEM: 60600621, 19-1191, 99-1191, 54581638, L760
Lucas Indicator Lens - Stalk Type - Amber Genuine Lucas lens as used on many Triumph, Norton and BSA models such as T140, Commando and A65 models....
+

wiring-term005
£0.65 (£0.78 inc VAT)
Ignition Coil/Distributor Straight Brass Terminal - Flat Contact Clip On Type Brass push on terminal for distributor coil - flat contact type. Clip on...
+

electign479-A15
£299.95 (£359.94 inc VAT)
Authentic K2F Magneto Housing For Electronic Ignition Systems Replica K2F magneto body designed to disguise the use of a 12v electronic ignition....
+

sw224R-A4
£2.45 (£2.94 inc VAT)
OEM: 82-5983, F5983, 68-9167
Lucas 88SA Ignition/Lighting Switch Retaining Bracket Retaining clip used on rotary type 88SA switch assemblies, fits over the switch body, secured with...
+

fkcond44
£10.95 (£13.14 inc VAT)
OEM: 54441582
Condenser fits: BSA, Triumph. OEM 54441582 BSA C25 1968-70, 440cc Victor Special, B50SS 1971, B50MX 1971-72, P34MX. Triumph Trophy TR25 1968, 750cc...
+

term117
£1.45 (£1.74 inc VAT)
6.30mm Push-On Spade Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term132
£1.45 (£1.74 inc VAT)
5.00mm Insulated Nipple Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term131
£1.45 (£1.74 inc VAT)
5.00mm Insulated Receptacle Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term108
£1.45 (£1.74 inc VAT)
5.30mm Insulated Fork Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

nut3971-B13
£7.95 (£9.54 inc VAT)
OEM: 70-3971, E3971
Alternator Rotor Nut - Triumph T20 Tiger Cub Models From 1959 Onwards To secure the alternator rotor on the shaft. Length UH: 3/4" (19mm) OD: 9/16"...
+

off-coil-105465
£74.95 £68.95 (£82.74 inc VAT)
OEM: 105465, 105-465, 465100, 96 201
PVL Replacement Motoplat Compatible Ignition Coil - 105465 Suitable replacement analogue coil for Motoplat 465100 electronic ignition systems as used in...
+

off-swt990
£6.45 (£7.74 inc VAT)
Universal Waterproof Engine Kill Switch Assembly - Push Button Type Complete assembly suitable for 7/8" handlebars. Waterproof rubber cap protects the...
+

term127
£1.45 (£1.74 inc VAT)
6.30mm Insulated Push-On Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term104
£1.45 (£1.74 inc VAT)
5.30mm Insulated Fork Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

fkref103-A7
£6.45 (£7.74 inc VAT)
OEM: 57161, 60-0691, RER25, 03-4013
REFLECTOR - Triumph / BSA / Norton Lucas type amber reflector with chrome surround for Triumph models including T100, T120 and TR6. Also used on Norton...
+

term121T
£1.55 (£1.86 inc VAT)
6.40mm Ring Terminal For 1.5mm - 2.5mm Cable Supplied in pack of 10 (for 1.5-2.5mm square cable)
+

term102
£1.45 (£1.74 inc VAT)
5.30mm Ring Terminal For .5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term113
£1.45 (£1.74 inc VAT)
6.30mm Blade Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term126
£1.45 (£1.74 inc VAT)
6.30mm Blade Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term106
£1.45 (£1.74 inc VAT)
5.30mm Ring Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term109
£1.45 (£1.74 inc VAT)
6.30mm Push-On Spade Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term141
£1.55 (£1.86 inc VAT)
6.30mm Insulated Push-On Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term136
£1.45 (£1.74 inc VAT)
4.00mm Insulated Nipple Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term135
£1.45 (£1.74 inc VAT)
4.00mm Insulated Receptacle Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

mag478-A17
£32.95 (£39.54 inc VAT)
OEM: MDGT, 70-3411, E3411
Lucas/BTH Manual Advance Magneto Pinion / Drive Gear - Pre Unit Triumph Twins - Alloy Correct fitment on many pre-unit twins with Lucas K2F or BTH manual...
+

lamp172-A6
£15.95 (£19.14 inc VAT)
OEM: 60-7448
Triumph Indicator Lamp Assembly - Front or Rear on Late T140 and TSS Models - BMW Type Turn signal indicator unit - stems or fixings not included. Takes a...
+

sw31405
£25.95 (£31.14 inc VAT)
OEM: 31405, LU31405
Clutch/Brake Lever Mounted Dip Switch Assembly - Pre Unit Models Complete lever mounted dip switch assembly as used extensive on various pre unit models...
+

wiring-term004
£1.45 (£1.74 inc VAT)
Bosch Type Distributor Terminal - Straight Stainless Steel - Crimp On Push Fit Type Stainless steel HT terminal to suit Bosch distributor caps with 4mm...
+

eltx-200
£210.00 (£252.00 inc VAT)
Triumph Tiger Cub Electronic Ignition Internal Rotor Stator Kit - All Models Suitable for Triumph T20 Tiger Cub models - adaptor required for pre 1962...
+

fkhorn048L
£104.95 (£125.94 inc VAT)
OEM: HF1234
Lucas Altette Horn - 6 Volt Lucas Altette horn with black cast iron body and chrome plated bezel and domed nuts. Two brass screw terminals. Chrome rim...
+

fkhorn048BL
£104.95 (£125.94 inc VAT)
OEM: HF1234, LUHF1234
Lucas Altette Horn - 12 Volt Lucas Altette horn with black cast iron body and chrome plated bezel and domed nuts. Two brass screw terminals....
+

eltx-200adp
£15.00 (£18.00 inc VAT)
Triumph Tiger Cub Adaptor Sleeve for Electronic Ignition Kit - Pre 1962 Models Rotor adaptor sleeve for use on pre 1962 Triumph T20 Tiger Cub models when...
+

fksw035-A9
£24.95 (£29.94 inc VAT)
OEM: 3444B, 6SA, 19-1125, 19-0867
Lucas 6SA Type Brake Light Switch - BSA A50 and A65 Models Circa 1962-70 Replica Lucas stop light switch complete with rubber wiring boot. The switch...
+

wiring5872-A17
£3.75 (£4.50 inc VAT)
OEM: 70-5872, E5872
Triumph Alternator Lead Sleeve Nut / Cable Guide  - Unit 350/500/650cc Models - Circa 1965-68 Alternator lead cable guide with a BSF thread, correct...
+

fkcont25
£17.95 (£21.54 inc VAT)
OEM: 425219, LU425219
Contact Point Set For Lucas 18D1 and 18D2 Distributor - Many British Twins Circa 1958-62 Fits Lucas 18D1 and 18D2 distributors as fitted to many models...
+

off-ign-single-trial
£249.95 (£299.94 inc VAT)
BSA/Triumph Single PVL Electronic Ignition System - Classic Trials System This genuine PVL digital system will produce a strong reliable spark for easy...
+

off-ign-cub
£224.95 (£269.94 inc VAT)
Triumph Tiger Cub Trials - PVL Electronic Ignition System This genuine PVL digital system will produce a strong reliable spark for easy starting....
+

off-ign-single-mx
£249.95 (£299.94 inc VAT)
BSA/Triumph Single PVL Electronic Ignition System - Pre 1965 Motocross Models This genuine PVL digital system will produce a strong reliable spark for...
+

dyn858-A18
£79.95 (£95.94 inc VAT)
OEM: E3H-RO
6v Dynamo Armature 165mm - E3H-RO Parellel Keyed Shaft Suit E3H-RO, Early motorcycle models As fitted to Lucas E3H Ro Dynamos Length: 165mm with 13mm...
+

horn050
£22.95 (£27.54 inc VAT)
OEM: HF1234A
Lucas Bezel and Domed Nuts For Altette Horn Genuine Lucas chrome plated bezel and domed nuts. Set includes the bezel, six nuts to secure the bezel to the...
+

mag436-A17
£6.45 (£7.74 inc VAT)
Lucas Magneto Serial Number and Model Plate - Clockwise, Anti-Clockwise and Competition Genuine Lucas steel plate with black/red background. As used...
 

mag417B-A20
£52.95 (£63.54 inc VAT)
OEM: LU459205, 459205, 459288
Lucas Magneto Cover Assembly With Breather for Lucas K2FC/K2FR Magnetos - 459205 Complete contact breaker end cap with breather and terminal assembly....
+

mag417-A20
£34.95 (£41.94 inc VAT)
OEM: LU459269, 459269, 459266, 459288
Lucas Magneto Cover Assembly for Lucas K2F/K1F Magnetos - 459269 Complete contact breaker end cap with terminal assembly and baffle. Supplied with earth...
+

wiring-term003
£0.95 (£1.14 inc VAT)
Distributor Cap 90° HT Insulator Rubber Boot Fits over the spark plug and ignition coil wire, and then over the distributor cap to prevent water ingress....
+

wiring-term002
£0.65 (£0.78 inc VAT)
Ignition Coil/Distributor 90° Brass Terminal - Crimp On Push Fit Type Brass push in terminal for distributor coil - right angled crimp on type. Suitable...
+

wiring-term001
£0.65 (£0.78 inc VAT)
Ignition Coil/Distributor Straight Brass Terminal - Crimp On Push Fit Type Brass push in terminal for distributor coil - straight crimp on type....
+

DTX9-BS
£25.25 (£30.30 inc VAT)
DTX9-BS 12v 8AH Maintenance Free Battery L151-W87-H106(mm) Valve regulated lead acid batteries once activated, are totally sealed. This eliminates spills...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.