.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Search results for "lucas dynamo"Products found: 58

dyn055-A17
£2.75 (£3.30 inc VAT)
OEM: 200829
Lucas Dynamo Terminal Rubber Cover OEM: 200829
+

dyn008-A17
£2.95 (£3.54 inc VAT)
OEM: 200609
Lucas Dynamo Cover Band Cork Insert - E3H, E3L, E3LM, E3HM, E3N Replacement cork seal for generator steel cover band. Length: 9" (228mm) Width: 1+9/16"...
+

bush200231-A17
£6.95 (£8.34 inc VAT)
OEM: 200231
Lucas Dynamo Commutator End Bracket Bush - E3H, E3HB and E3HM Dynamos - 200231 Brass bush - locates in the commutator end bracket/frame assembly on the...
+

dyn405-split-A17
£4.75 (£5.70 inc VAT)
OEM: 188818, LU188818
Lucas Dynamo Bullet Connectors - Brass Bullet or Split Type - Pack of 6 Bullet connectors for the dynamo and voltage control box. 2 required for the...
 

dyn111704-A17
£3.95 (£4.74 inc VAT)
OEM: 111704
Lucas Dynamo Drive Gear End Retaining Screw - E3L, E3HM, E3LM Sprocket / driving gear pinion securing screw - as used on E3L, E3HM, E3LM dynamos fitted to...
+

dyn487-A17
£24.95 (£29.94 inc VAT)
Lucas Dynamo Yoke / Casing - E3L and E3LM Dynamos Replica Lucas E3L / E3LM main shell with integral dowels to fit the commutator end and driving end...
+

dyn488-A17
£23.95 (£28.74 inc VAT)
Lucas Dynamo Pole Shoe - E3L and E3LM Dynamos Replica Lucas E3L / E3LM pole shoe with two threaded holes. Attaches internally to the the dynamo yoke /...
+

dyn481-A17
£19.95 (£23.94 inc VAT)
OEM: 200910
Lucas Dynamo Commutator End Bracket - E3L, E3LM and E3N Dynamos Lucas dynamo commutator end frame - suitable for E3L, E3LM and E3N dynamos. Houses the...
+

dyn482-A17
£14.95 (£17.94 inc VAT)
OEM: 200912, 200353
Lucas Dynamo Driving End Bracket / Plate - E3LM, E3HM Dynamos Cast alloy generator drive end frame - houses the drive end bearing. Two threaded holes +...
+

dyn483-A17
£16.95 (£20.34 inc VAT)
OEM: 200262
Lucas Dynamo Drive End Bearing Retaining Plate - E3LM, E3HM Billet alloy generator drive end bearing plate - retains the drive end bearing. Located behind...
+

dyn483A-A17
£15.95 (£19.14 inc VAT)
OEM: 200799
Lucas Dynamo Drive End Bearing Retaining Plate - E3N Dynamos Billet alloy generator drive end bearing plate - retains the drive end bearing. OEM: 200799...
+

dyn483B-A17
£19.95 (£23.94 inc VAT)
OEM: 200378
Lucas Dynamo Drive End Bearing Retaining Plate - E3H, E3HB, E3L - Three Hole Fixing Billet alloy generator drive end bearing plate - retains the drive end...
+

dyn482B-A17
£23.95 (£28.74 inc VAT)
OEM: 200912, 200353
Lucas Dynamo Driving End Bracket / Plate - E3LM, E3HM Dynamos + MO1 and MO1L Magdynos Billet alloy generator drive end frame - houses the drive end...
+

dyn482A-A17
£23.95 (£28.74 inc VAT)
OEM: 200382
Lucas Dynamo Driving End Bracket / Plate - E3H, E3HB, E3L - Three Hole Fixing Billet alloy generator drive end frame - houses the drive end bearing. Three...
+

dyn078-A17
£7.95 (£9.54 inc VAT)
OEM: 200609, 127584
Lucas Dynamo Cover Band With Cork Seal - E3H, E3L, E3LM, E3HM, E3N Generator cover steel band with riveted cork seal and fixing screw. Concealed screw...
+

dyn083-A17
£7.95 (£9.54 inc VAT)
OEM: 200522, 111050
Lucas Dynamo Cover Band With Cork Seal - E3H, E3L, E3LM, E3HM Generator cover steel band with riveted cork seal and fixing screw. Raised clamp and screw...
+

dyn826-A17
£9.95 (£11.94 inc VAT)
OEM: 200826
Lucas Dynamo Commutator End Cover Assembly - E3L,  E3LM and E3N Dynamos Offset type generator clamping terminal plate. Recess to accommodate the end...
+

dyn002-L-A17
£12.45 (£14.94 inc VAT)
OEM: 200737
Pair of Genuine Lucas Dynamo Brushes - Large Type - 200737 Dynamo brush set as used on various Lucas generators including  E3L, E3LM and E3N models -...
 

bear189307
£3.95 (£4.74 inc VAT)
OEM: 189307, 189237
LUCAS E3L, E3LM, E3N, E3HM, Dynamo Generator Bearing - Drive End To fit Lucas Dynamos E3L, E3LM, E3N, E3HM OEM: 189307, 189237
+

bear189210-F4
£3.95 (£4.74 inc VAT)
OEM: 189210
LUCAS E3L, E3LM, E3N, E3HM, Dynamo Generator Bearing 189210 - Commutator End To fit Lucas Dynamos E3L, E3LM, E3N, E3HM OEM: 189210
+

dyn404-A17
£1.45 (£1.74 inc VAT)
OEM: 463334, LU463334
Tab washer, to fit the drive end of all Lucas dynamos. OEM: 463334, LU463334
+

fkcont29
£69.95 (£83.94 inc VAT)
OEM: 484098
Contact Set - Lucas Magneto / Dynamo - ONLY A FEW LEFT - UNOBTANIUM! Magneto contact set, Magneto Points, Magneto contacts Last few sets made in England....
+

dyn219-A18
£39.95 (£47.94 inc VAT)
OEM: 200731
12v Dynamo Field Coil for all E3L dynamos - 60W Made in England to original specification, copper core wire double insulated, pressed for Lucas E3L...
+

fkdyn210-A18
£79.95 (£95.94 inc VAT)
OEM: 200712
6v Dynamo Armature 178mm unthreaded Shaft 6v Dynamo armature for Triumph, AMC and Norton Twins Length: 178mm with unthreaded shaft The drive end of the...
+

fkdyn211-A18
£79.95 (£95.94 inc VAT)
OEM: 200752
6v Dynamo Armature 190mm Taper Shaft 60W 60W BSA A7/A10 Twins and C10/C11 (1949-1955) As fitted to Lucas E3L Dynamos Length: 190mm with Taper shaft at...
+

fkdyn212-A18
£79.95 (£95.94 inc VAT)
OEM: 200754
6v Dynamo Armature 179mm Parallel Shaft 60W To fit all 60W Mag/Dyno Models. Length: 179mm with parallel shaft and thread at drive end. Fits Ariel...
+

fkdyn213-A18
£79.95 (£95.94 inc VAT)
OEM: 200802
6v Dynamo Armature 166mm Taper Shaft - 36W 36W AMC singles As fitted to Lucas E3N Dynamos Length: 166mm with tapered shaft at drive end. Fits...
+

fkdyn215-A18
£84.95 £79.95 (£95.94 inc VAT)
OEM: 200712
12v Dynamo Armature 178mm Unthreaded Shaft 12v Dynamo armature To fit Triumph, AMC and Norton Twins Length: 178mm with unthreaded shaft Made in Great...
+

fkdyn216-A18
£84.95 £79.95 (£95.94 inc VAT)
OEM: 200752
12v Dynamo Armature 190mm with Taper Shaft - 60W 60W BSA A7, A10 Length: 190mm length with taper shaft Made in Great Britiain using the Original...
+

fkdyn217-A18
£84.95 £79.95 (£95.94 inc VAT)
OEM: 200754
12v Dynamo Armature 179mm Parallel Shaft - 60W Length: 179mm with parallel shaft at drive end To fit all 60W Mag/Dyno Models Made in Great Britiain...
+

fkmag121-A17
£8.45 (£10.14 inc VAT)
OEM: 460056, 460056S, 460055
Magneto/Dynamo Securing Strap With Roller Bushes and Pins Complete magneto securing strap assembly suitable for an extensive range of Lucas magdynos....
+

fkmag229-A17
£7.95 (£9.54 inc VAT)
OEM: LU454495, 454495
Lucas E3L Steel Dynamo Drive Gear 22 Teeth OEM: LU454495, 454495
+

fkreg208-A23
£49.95 (£59.94 inc VAT)
OEM: 37097, MCR2, LU37097
Voltage Regulator 6v Control Box, Lucas Type - MCR2 - 6 Volt MCR2 Replica. Black box, 2 mounting holes approx 95mm apart centre to centre, F.A.D.E. wire...
+

fkreg209-A23
£39.95 (£47.94 inc VAT)
OEM: LU37221K, RB108
Voltage Regulator 6 Volt Control Box - RB108 Positive or Negative Earth Dynamo Regulator Control Box RB108 Lucas Style - 6 Volt Replacement of Lucas...
+

dyn214-A18
£39.95 (£47.94 inc VAT)
OEM: 200731
6V Field Coil for all E3L dynamos - 60W Made in England to original specification, copper core wire double insulated, pressed for Lucas E3L shoe Fits E3L...
+

dyn227-A18
£39.95 (£47.94 inc VAT)
OEM: LU200188
Replica Lucas 6V Field coil for all E3N - 36W - Made in UK Suit Lucas E3N Dynamos Fits Lucas short dynamos from 1936 onwards 36 Watt OEM: LU200188
+

fkdyn212s-A18
£79.95 (£95.94 inc VAT)
OEM: 200304, LU200304
6v Dynamo Armature Short Type Parallel Shaft 36W To fit all 36W Mag/Dyno Models. Length: 165mm with parallel shaft and thread at drive end. Shaft...
+

mag429-A17
£5.95 (£7.14 inc VAT)
OEM: LU463898
Lucas Type Magneto/Dynamo Points Cover Clip Pillar Length 1+5/8" (41mm) Clip Length 1+7/8" (48mm) Female thread in pillar OEM: LU463898
+

wiring281-lucas
£47.95 (£57.54 inc VAT)
OEM: 99-7911
Genuine Lucas Main Wiring Harness - Triumph Pre Unit T100, 5T (1949-51) -  99-7911 As fitted to Triumph Pre Unit models T100, 5T Mag, Dynamo Nacelle...
+

dyn674-A18
£79.95 (£95.94 inc VAT)
OEM: 200674
6v Dynamo Armature 145mm Straight Parallel Shaft Suit E3HMD, Early Triumph Twin and others As fitted to Lucas E3HMD Dynamos Length: 145mm with 13mm...
+

dyn308-A18
£79.95 (£95.94 inc VAT)
OEM: 200308
6v Dynamo Armature 176mm Tapered Threaded Shaft Suit E3H, Early BSA and others As fitted to Lucas E3H Dynamos Length: 176mm with 15mm shaft at Drive...
+

dyn305-A18
£79.95 (£95.94 inc VAT)
OEM: 200305
6v Dynamo Armature 205mm Tapered Threaded Shaft Suit E3HB, Early Royal Enfield and others As fitted to Lucas E3HB Dynamos Length: 205mm with 15mm shaft...
+

dyn370-A18
£79.95 (£95.94 inc VAT)
OEM: 200370
6v Dynamo Armature 157mm Tapered Keyed Shaft Suit E3AR, Early motorcycle models As fitted to Lucas E3AR Dynamos Length: 157mm with 13mm shaft at Drive...
+

wiring242-lucas
£37.95 (£45.54 inc VAT)
OEM: LU54934815
Genuine Lucas Main Wiring Harness - Triumph Pre Unit T100, T110, T120 (1955-59) - LU54934815 As fitted to Triumph Pre Unit models T100, T110, T120 Magneto,...
+

wiring108-lucas
£53.95 (£64.74 inc VAT)
OEM: 99-7911, 997911
Genuine Lucas Main Wiring Harness - Triumph Pre Unit T100, T110, 5T, 6T (1952-55) As fitted to Triumph Pre Unit models T100, T110, 5T, 6T Magneto with...
+

boyer-ign-79
£105.95 (£127.14 inc VAT)
Electronic Ignition System - Triumph/BSA Single - Distributor - Boyer Bransden MkIV - Dynamo 6V 6 V Electronic ignition kit suitable for: Triumph and BSA...
+

wiring094-lucas
£49.95 (£59.94 inc VAT)
OEM: N2
Genuine Lucas Main Wiring Harness As fitted to Norton 88/99 Twins (1955-) Magneto/Dynamo models Premium quality cloth braided wiring harness Supplied boxed,...
+

electign496
£249.95 (£299.94 inc VAT)
VAPE Magneto Replacement Kit - 12V Includes 12V Ignition Kit, Distributor Body and 12V Twin Output Ignition Coil This is a new complete electronic...
+

dyn465-A20
£7.95 (£9.54 inc VAT)
OEM: LU200354, 200354
Lucas E3H, E3HM Dynamo Commutator End Cover With Central Hole - Bakelite Replica Lucas black bakelite dynamo end cap as fitted to E3H and E3HM dynamos....
+

dyn8614-A17
£1.95 (£2.34 inc VAT)
OEM: 188614, LU188614
Lucas Generator Dynamo Oil Seal - E3 / E3H / E3L - 188614 Bearing oil seal to fit many E3 dynamos such as 20003,  20009, 20035, 20011, 20037. OD: 1+1/4"...
+

dyn858-A18
£79.95 (£95.94 inc VAT)
OEM: E3H-RO
6v Dynamo Armature 165mm - E3H-RO Parellel Keyed Shaft Suit E3H-RO, Early motorcycle models As fitted to Lucas E3H Ro Dynamos Length: 165mm with 13mm...
+

dyn431-A20
£10.95 (£13.14 inc VAT)
OEM: LU200902, 200902
Replica Lucas E3L Dynamo End Cap / Cover - 5 O'Clock Wire Exit - Bottom Right Dynamo commutator end cover assembly as used on later E3L dynamos. The...
+

dyn431A-A20
£10.95 (£13.14 inc VAT)
OEM: LU200918, 200918
Replica Lucas E3L Dynamo End Cap / Cover - Wire Exit 11 O'Clock - Top Left Dynamo commutator end cover assembly as used on later E3L dynamos. The cable...
+

mag433-A17
£2.75 (£3.30 inc VAT)
OEM: LU463114, 463114
Replica Lucas Mag/Dyno Clutch Star Spring Washer Dynamo clutch star friction spring as used in many Lucas magdynos including MO1, MO1L, MN, MS etc. ID:...
+

dyn-bolt460-A17
£3.95 (£4.74 inc VAT)
OEM: 200227
Dynamo Through Fixing Bolt - Short Type For Lucas E3H and E3N Type Generators One bolt and nut - correct fitment on the shorter E3H and E3N type...
+

dyn-bolt461-A17
£4.45 (£5.34 inc VAT)
OEM: 200732
Dynamo Through Fixing Bolt - Long Type For Lucas E3L and E3LM Type Generators One bolt, serrated washers and nut - correct fitment on the longer E3L and...
+

wiring202-lucas
£64.95 (£77.94 inc VAT)
OEM: 994511
Genuine Lucas Main Wiring Harness - Triumph Pre Unit TR5/TR6 Trophy Models Circa 1951-55 As fitted to non-nacelle magneto, dynamo TR5 and TR6 models from...
+

dyn572-A17
£3.45 (£4.14 inc VAT)
OEM: 123063, 169010
Lucas E3LM, E3HM Dynamo to MOIL Magdyno Bearing Retaining Plate Fixing Screw Dynamo to magneto part threaded screw with square head + round slotted nut....
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.