VAPE 12V Magneto Replacement Kit - Electronic Ignition, Distributor Body and Twin Output Coil

VAPE Magneto Replacement Kit - 12V

Includes 12V Ignition Kit, Distributor Body and 12V Twin Output Ignition Coil

This is a new complete electronic ignition kit suitable for all twin cylinder Triumph, BSA and Norton models which normally use a Lucas or BTH magneto. It replaces the magneto with solid-state components and requires no modification to the engine.

The kit is based on a billet alloy housing which bolts on in place of the magneto, the housing is fully re-buildable using easily available sealed bearings and oil seals. The ignition kit is manufactured using premium quality components, with a unique billet stator plate design. No fragile pick up coils or exposed soldered joints which are often easily damaged. The stator plate has all component parts fully encapsulated in resin to avoid these issues.

The unit will run with negative or positive earth but will need a 12 volt system so will be suitable for models with a Lucas alternator wired for 12 volts or a dynamo converted to 12 volts (preferably high output if you are using daytime lights).

The ignition box is very small measuring and can be tucked away easily under the tank etc. All wiring and connectors are supplied as well as comprehensive fitting instructions. The kit also includes the recommended 12v twin lead coil with a 3.5 - 5 ohm primary resistance to give the best performance on a twin cylinder machine. The system will work between 10 -16 volts so eliminates the advancing problems that occured with some older electronic ignitions when battery voltage drops when running with the lights on.