.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Frame

guard7707
£134.95 (£161.94 inc VAT)
OEM: 82-7707, 82-4198, 82-5409
Triumph Chainguard - 350/500cc Unit/Pre Unit Twins - 1958-73 Rear chain guard for all Triumph 350/500cc Unit and Pre -Unit Twins. Please note: These are...
+

stay97-3885
£24.95 (£29.94 inc VAT)
OEM: 97-3885, H3885
Triumph Front Bottom Mudguard Stay - Black - 500/650cc Unit from 1966-70 Suit 650cc T120, TR6 and 500cc T100 from 1966-70 Overall length: 14" (35.5cm)...
+

shim3683-C3
£4.95 (£5.94 inc VAT)
OEM: 82-3683, 82-3684, F3683, F3684
Triumph Swinging Arm Spindle Shim Set - All Pre-Unit Models To fit 5T, 6T, TR5, T100, T110 and T120 pre unit models with swinging arm. Set of 4 shims:...
+

num1835
£11.95 (£14.34 inc VAT)
OEM: 011835, 01-1835
Front Number Plate Blade - AJS / Matchless Models From 1947 Onwards Correct fitment for all standard touring AMC models - singles and twins. Supplied in...
+

mudR-FK9A-48
£57.95 (£69.54 inc VAT)
Extra Long 5" Rear Mudguard - Polished Alloy - 18/19" Wheel - Heavy Duty - C Section Made in England using a heavier gauge alloy than standard...
 

swing0119-C4
£21.95 (£26.34 inc VAT)
OEM: 82-4076, F4076, 82-4196, F4196, 82-4195, F4195
Triumph Swinging Arm Spindle Set - Early Unit 350/500cc Models Circa 1958-66 Complete swinging arm spindle set including pin, pivot bushes and caps....
+

seal2244-C3
£4.45 (£5.34 inc VAT)
OEM: 83-2244, F2244
Triumph/BSA Swinging Arm Pivot Oil Seal - B25, B50 and TR25W and TR5T Models Two required per bike - OIF models from 1971 onwards. OD: 3" (31.9mm) ID:...
+

stud42-4714-E3
£9.95 (£11.94 inc VAT)
OEM: 42-4714
BSA Centre Stand Pivot Stud - A and B Group Swinging Arm Models Circa 1954-57 Threaded centre stand pin correct fitment on swinging arm A7, A10, B31,...
+

swing2690-C3
£1.25 (£1.50 inc VAT)
OEM: 83-2690, F12690
Triumph/BSA Swinging Arm Pivot RH Distance Piece - OIF 650/750cc Twins Circa 1971-85 Swinging arm pivot right hand spacer / thick washer. Correct fitment...
+

mudR1617-132
£89.95 (£107.94 inc VAT)
OEM: 83-1617, F11617, 82-8143, F8143
Triumph Rear Mudguard - 500/650cc Models Circa 1968-70 - Raw Steel Correct indents and cutaways for T100R, T100C, T120R, TR6C and TR6R Models from...
+

nut-S4-13-C4
£1.45 (£1.74 inc VAT)
OEM: S4 13, S4-13
Triumph Footrest To Engine Plate Nut - 650cc Models Circa 1964-68 Footrest mounting nut as used on T120 and TR6 from 1964-68. Stud and dowel also...
+

fkmud34
£95.95 (£115.14 inc VAT)
Mudguard 6" wide Rear Stainless Steel universal blade polished finish for 18/19" wheel Length around curve: 128cm Width - outside edge to outside...
+

bear344k-F4
£41.95 (£50.34 inc VAT)
Steering Race Ball End Conversion Kit for BSA A, B and M Group models. Suit BSA models including A10, A65, B31, M21 etc. Sealed type ball bearing...
+

fkswing256-C4
£29.95 (£35.94 inc VAT)
OEM: 40-4215
SWINGING ARM PIN - BSA BSA C15, B40 Early Models Fine thread 26 tpi swinging arm spindle Made in England OEM: 40-4215
+

seatfix7542-C2
£7.95 (£9.54 inc VAT)
OEM: 83-7542
Rear Seat Hinge - Triumph Rear Seat Hinge with stop, as fitted to Oil in Frame models Painted in Gloss black OEM: 83-7542
+

num2727-C4
£4.95 (£5.94 inc VAT)
OEM: 83-2727
Triumph Rear Number Plate Bracket - Left Side As fitted to later OIF models Made in England by LF Harris OEM: 83-2727
+

num2728-C4
£4.95 (£5.94 inc VAT)
OEM: 83-2728
Triumph Rear Number Plate Bracket - Right Side As fitted to later OIF models Made in England by LF Harris OEM: 83-2728
+

spr2835-C7
£37.95 (£45.54 inc VAT)
OEM: 82-2835
Pair of 7" Conical Seat Springs - Triumph Rigid Pre-Unit Models Correct for Triumph pre-unit rigid frame models, plus other custom applications...
+

wash1270-E2
£0.95 (£1.14 inc VAT)
OEM: 83-1270, F11270
Triumph Centre Stand Lock Washer -  650/750cc Models Centre stand pivot bolt tab washer as fitted to Triumph 650cc and T150 & T160 Trident models....
+

grom1114-C7
£1.55 (£1.86 inc VAT)
Universal Rubber Grommet  - OD: 20mm, ID: 9mm x Depth: 10mm OD: 25/32" (20mm) ID: 11/32" (9mm) Depth: 13/32" (10mm)
+

mud4439
£77.95 (£93.54 inc VAT)
OEM: 97-4439, H4439
Triumph Front Mudguard Chrome - 6 Hole - 500/750cc USA Models Circa 1973-74 Correct fitment on T100, T140, TR7 and T150 USA models circa 1973-74. Rolled...
+

stand4729
£51.95 (£62.34 inc VAT)
OEM: 90-4729
BSA / Triumph Centre Stand - Bantam D7, D10, D14 + T20 Super Cub Correct fitment for BSA Bantam D7, D10, D14 models circa 1960-71 and Triumph Super Cub...
+

strap2950-E4
£3.95 (£4.74 inc VAT)
Universal Rubber Battery Strap - 5+9/16" (141mm) Long - Closed Loop Type Strong rubber band with integral closed metal brackets at each end. Total...
+

hl-wash2210-A4
£0.45 (£0.54 inc VAT)
OEM: 97-2210, H2210
Triumph Headlight Bracket Washer - OIF 500/750cc Models From 1971 Onwards Headlamp bracket ear backing washer. Correct fitment on later T100 models + disc...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.