.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Frame

lock0402
£39.95 (£47.94 inc VAT)
OEM: 60-0402, 60-0403
Nieman Steering Lock and Keys - Triumph 1963-1967 Top quality steering lock as fitted to various Triumphs up to 1967 including Pre-Unit 500cc and Unit...
+

spring-kit953-E2
£14.95 (£17.94 inc VAT)
OEM: 21-2077, S2077, 14-1304, 83-3793, F13793
Triumph Centre Stand Fixing Kit - OIF T120 + T140 and TR7 Models - Circa 1971-79 Complete set of centre stand mounting hardware. Correct fitment on oil in...
+

bear2245-C3
£4.95 (£5.94 inc VAT)
OEM: 83-2245, F2245
Triumph/BSA Swinging Arm Bearing - B25, B50 and TR25W and TR5T Models Needle roller swinging arm bearing - two required per bike. OD: 1+1/4" (31.8mm)...
+

knob3474-C4
£10.95 (£13.14 inc VAT)
OEM: 82-3472, F3472
Triumph Toolbox Cover Knob - T15 and T20 Tiger Cub Models Circa 1953-68 Tool box casing lid thumb knob with internal thread as used on various Tiger Cub...
+

stay3599-C2
£5.95 (£7.14 inc VAT)
OEM: 82-3599, F3599
Triumph Rear Mudguard Mounting Bracket - Pre Unit and Early T90/T100 Models Circa 1954-64 Rear engine plates to mudguard bracket. Correct fitment s ingle...
+

rub4805-pair
£8.95 (£10.74 inc VAT)
OEM: 90-4805
BSA Bantam Riders Footrest Rubbers - D1, D3 and D5 Models Pair of BSA long ribbed riders footrest rubbers as fitted to rigid and plunger frame Bantam...
+

swing2692-C3
£1.45 (£1.74 inc VAT)
OEM: 83-2692, F12692
Triumph/BSA Swinging Arm Pivot Dirt Excluder - Unit OIF 650/750cc Twins Circa 1971-87 Rubber dust seal - locates each end of the swinging arm spindle...
+

spring909-E2
£5.95 (£7.14 inc VAT)
OEM: 06-2592
Norton Commando 750cc, 850cc prop stand spring (1971-76). (Side Stand Spring) Length inside hooks: 7" (175mm) OEM: 06-2592
+

guard2641
£64.95 (£77.94 inc VAT)
OEM: 83-2641
Triumph T140/T120 Chainguard - Black - 83-2641 Rear chain guard for Triumph Bonneville T140 models, and T120R models. Painted in Black Gloss Made in...
+

stand4744-E2
£6.95 (£8.34 inc VAT)
OEM: 42-4744
BSA Centre Stand Pivot Bar/Pin - BSA A and B Swinging Arm Models from 1958-62 Suitable for swinging arm models - BSA Goldstar, B31, B32, B33, B34 from...
+

brake0593-C18
£6.95 (£8.34 inc VAT)
OEM: 37-0593, W593, 60-0638, D638
Triumph Front Brake Cable End Clevis - Fork End Overall length: 1+3/8" (35.3mm) OEM: 37-0593, W593,  60-0638, D638
+

cab5137
£4.45 (£5.34 inc VAT)
OEM: 68-5137, 97-2658, H2658
BSA/Triumph Cable Guide Bracket - Top Yoke - A50, A65, B25, B44, C25 + T250, TR25W - Circa 1967-70 Locates between the top yoke and fork top nuts to...
+

swing3798-C3
£1.95 (£2.34 inc VAT)
OEM: 82-3798, F3798
Triumph Swinging Arm Spindle End Cap - Pre Unit 500/650cc + Unit 350/500cc Models - Circa 1954-66 Swinging arm end cap - correct fitment on: Pre unit 5T,...
+

wash0660
£0.65 (£0.78 inc VAT)
OEM: 30-0660, 30-660
BSA - 7/16" Plain Washer - Fuel Tank and Frame + Universal Use Rear fuel bank support bolt washer on rigid and plunger frame C10, C11, B31, B32, B33,...
+

strap8028-E4
£14.95 (£17.94 inc VAT)
OEM: 82-8028, F8028
Triumph Rear Battery Strap Mounting Bracket - 500/650cc Models Circa 1968-74 Battery carrier rear mounting strap with rectifier mounting tab. Correct...
+

wash5679-E2
£0.75 (£0.90 inc VAT)
OEM: 82-5679, F5679
Triumph Centre Stand Bolt Washer - Unit 350/500/650cc + Early T150 Models Plain flat washer locates over the bolt on the inner side of the stand lug....
+

off-mud019-P
£64.95 (£77.94 inc VAT)
Manx Norton/Triton Type Short Front Mudguard - Polished Alloy - 18/19" Wheel Universal plain undrilled, C shaped profile to fit 18/19" front wheel....
+

stays4088/90
£43.95 (£52.74 inc VAT)
OEM: 97-4088, 97-4090, H4088, H4090
Triumph/BSA Headlamp Mounting Wire Stays - A65 Firebird Scrambler and TR6C Models Circa 1971-72 Pair of chrome plated headlight mounting stays suitable...
+

stay97-1681
£23.95 (£28.74 inc VAT)
OEM: 97-1681, H1681
Triumph Front Mudguard Mounting Stay - Unit 350/500/650cc + T20 Tiger Cub Models Circa 1964-70 Two tab front stay as used on T90, T100, T120, TR6 models...
+

num44
£27.95 (£33.54 inc VAT)
OEM: 90-6748
BSA Rear Number Plate - Bantam D7, D10 and D14 Models + B40 and A65 Rocket Models Circa 1964-65 Long type rear number plate / tail light bracket as used...
+

rub26
£10.95 (£13.14 inc VAT)
OEM: 04-0370
Footrest Rubber Norton - Bicycle Style Suit earlier Nortons pre 1956 Branded - NORTON 3+3/4" Long 2+1/4" Wide Priced per PAIR OEM: 04-0370
+

stand932
£89.95 (£107.94 inc VAT)
OEM: 82-5932
Triumph Centre Stand for T120, 6T and TR6 Models - 1964-68 Powder coated black OEM: 82-5932 Made in England Made by LF Harris to the original...
+

spring-kit958-E2
£8.95 (£10.74 inc VAT)
Centre Stand Fixing Kit Triumph T120 etc Includes spring, bolts and washers Triumph T120 1963-67
+

fkswing355-S-C4
£18.95 (£22.74 inc VAT)
OEM: 42-4112
BSA Solid Type Swinging Arm Spindle - A and B Group Models Circa 1954-57 Solid swinging arm spindle - correct fitment on A7, A10, B31, B32, B33 and B34...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.