.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

fkgk058
£11.95 (£14.34 inc VAT)
OEM: T2084, T2088, T2083, T1084
Norton Rocker Box Gasket Set. Norton 7 Twin, 77 Twin, 88 Twin, 99 Twin, Manxman. Suit most Twin Cylinder models. Comprises of 7 Gaskets and 4 Washers....
+

gsprk482/14/.335-B5
£29.95 (£35.94 inc VAT)
OEM: 90-0473, 90-473, 90-0299, 90-299
BSA Bantam Gearbox Sprocket All Models From D1 to D14 and B175 - 14T or 16T - 415 Chain 14 or 16 tooth front sprocket for D1, D3, D5, D7, D10, D14 and...
 

fkgkch391
£6.95 (£8.34 inc VAT)
OEM: 12302-9, 018652, 01-8652
Primary Chaincase Gasket - AJS, Matchless Rubber Gasket Band, 'V' Shaped, suit those leaky tin chaincase models from about 1946. Metal band also available...
+

sprock652-B5
£26.95 (£32.34 inc VAT)
OEM: 57-1569
Triumph T90, T100 etc (1959-74) Gearbox Sprocket 20T Chain Pitch: 5/8" x 3/8" (530) Number of Teeth: 20 OEM: 57-1569, T1569
+

conrod6487-B21
£72.95 (£87.54 inc VAT)
OEM: 70-6487, E6487
Triumph T20 Tiger Cub Conrod / Connecting Rod - SM and SH Models Circa 1964-68 Suitable for later T20 models - from engine number 99720. Forged steel -...
+

pist3958
£119.95 (£143.94 inc VAT)
OEM: 70-3958, E3958, CP172
Triumph T20 Tiger Cub Piston - 9.1 Compression Ratio - Various Models Circa 1959-68 - Gandini/GPM Supplied as 1 piston, complete with rings, gudgeon pin...

gearbox3122-B13
£2.95 (£3.54 inc VAT)
OEM: 67-3122
BSA Cam Plunger Housing Lock Nut - A, B and C Group Models Gearbox camplate plunger housing lock nut to fit A7 and A10 models - both plunger or swinging...
+

gearbox3121-B13
£1.95 (£2.34 inc VAT)
OEM: 67-3121
BSA Cam Plunger Spring - A, B and C Group Models Gearbox camplate plunger spring to fit A7 and A10 models - both plunger or swinging arm frame. Also...
+

gearbox3119-B13
£10.95 (£13.14 inc VAT)
OEM: 67-3119
BSA Cam Plunger - A, B and C Group Models Gearbox camplate plunger to fit A7 and A10 models - both plunger or swinging arm frame. Also B31/B33 swinging...
+

nut3971-B13
£7.95 (£9.54 inc VAT)
OEM: 70-3971, E3971
Alternator Rotor Nut - Triumph T20 Tiger Cub Models From 1959 Onwards To secure the alternator rotor on the shaft. Length UH: 3/4" (19mm) OD: 9/16"...
+

gearbox3120-B4
£7.95 (£9.54 inc VAT)
OEM: 67-3120
BSA Cam Plunger Housing - A, B and C Group Models Gearbox camplate plunger housing lock to fit A7 and A10 models - both plunger or swinging arm frame....
+

rod3372-B17
£6.95 (£8.34 inc VAT)
OEM: 70-3372, E3372
Triumph Engine Push Rod - T15 Terrier and Tiger Cub T20 Models - 1954 Onwards Length: 6+1/2" (165mm) Premium Quality - Made in England OEM: 70-3372,...
+

fkchain520-oring
£66.95 (£80.34 inc VAT)
O-Ring EXTRA HEAVY DUTY Motorcycle Drive Chain 520 - 106 to 120 links 5/8" x 1/4" (P x W) These chains incorporate a rubber O-shaped seal that fits between...

fkchainsss415
£11.95 (£14.34 inc VAT)
OEM: 112045
415 Standard Classic Motorcycle 90R 1/2" x 3/16" Chain - Triple SSS - 120 Links Supplied with a connecting spring link. 90R 1/2" x 3/16" (P x W) standard...
+

fkchainsss420
£9.95 (£11.94 inc VAT)
OEM: 110044
420 Standard Classic Motorcycle 125EBSR 1/2" x 3/16" Chain - Triple SSS - 100 to 136 Links Supplied with a connecting spring link. 125EBSR 1/2" x 3/16"...

kick1426-B4
£2.45 (£2.94 inc VAT)
OEM: 57-1426, T1426
Triumph Kickstart Pawl Retaining Disc - 350/500cc Unit Models - 1958 Onwards Correct fitment on T90, 3TA, 5TA, T100 models circa 1958-74. OD: 1+11/16"...
+

wash0239
£0.95 (£1.14 inc VAT)
OEM: 40-0239, NE507, 99-3540
Triumph / BSA Fibre Washer - Chaincase Inspection Plug + Gearbox Filler Cap - 1+1/4" Various uses on many single and twins. OD: 1+1/4" (31mm) ID: 1"...
+

enginestud-4537-B13
£8.95 (£10.74 inc VAT)
OEM: 70-4537, E4537
Triumph Short Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Rear stator stud, correct fitment on unit 6T, T120 and TR6 models circa...
+

enginestud-4536-B13
£8.45 (£10.14 inc VAT)
OEM: 70-4536, E4536
Triumph Long Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Front stator stud, correct fitment on unit 6T, T120 and TR6 models circa...
+

tube4704-B13
£2.45 (£2.94 inc VAT)
OEM: 70-4704, E4704, 71-1078, E11078
Triumph Primary Chain Oiler Tube - Unit 650/750cc Models From 1963 Onwards Correct fitment on unit 650cc models - 6T, T120, TR6 from 1963 onwards + T140...
+

off-esprk449
£29.95 (£35.94 inc VAT)
OEM: 70-3912, E3912
Triumph T20 Tiger Cub  - Duplex Engine Primary Drive Sprocket - 16T Crankshaft sprocket for Triumph Tiger Cub trials/competition models. Will require the...
+

plug4922-B13
£3.25 (£3.90 inc VAT)
OEM: 70-4922, E4922
Triumph Primary Chain Oil Drain and Adjuster Plug - Long Type - 650cc Twins from 1962-65 Long type with BSF thread - used on 6T, T120 and TR6 models...
+

fkclutch218-B23
£8.95 (£10.74 inc VAT)
OEM: 70-5085
TENSION BLADE - Triumph Triumph T140 primary chain tensioner blade. For Triplex Chain Chain Slipper, tensioner. OEM: 70-5085
+

clutch313H-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1722, 68-3281
Large Clutch Cush Drive Rubber. BSA A50/A65, Triumph T100/T120/T140. 3 Spring Clutch. Please note: These rubbers are a very tight fit in the cush drive, they...
+

clutch312H-B23
£1.75 (£2.10 inc VAT)
OEM: 57-1723, T1723 68-3282, 57-1185, T1185
Small Clutch Cush Drive Rubber. BSA A50/A65, Triumph T100/T120/T140 3 and 4 Spring Clutch. Please note: These rubbers are a very tight fit in the cush...
+

off-gsprk402/420-13
£19.95 (£23.94 inc VAT)
OEM: 57-1555, T1555, 57-1513, T1513
Triumph T20 Tiger Cub  - 420 Chain Gearbox Sprocket - 13T, 14T or 17T - Talon Front sprocket suitable for Triumph Tiger Cub trials/competition models...
 

off-gsprk402/415-13
£19.95 (£23.94 inc VAT)
OEM: 57-1555, T1555, 57-1513, T1513
Triumph T20 Tiger Cub - 415 Chain Gearbox Sprocket - 13T or 14T - Talon Front sprocket suitable for Triumph Tiger Cub trials/competition models using...
 

off-gsprk482-13
£16.95 (£20.34 inc VAT)
OEM: 90-0299, 90-299
BSA Bantam - 420 Chain Gearbox Sprocket - 13T or 14T - Talon Front sprocket suitable for BSA Bantam trials/competition models using standard 420 chain....
 

pist0594
£224.95 (£269.94 inc VAT)
OEM: 67-0594, 67-594, Hepolite No. 3650
Gandini/GPM Pistons - BSA 650cc A10 OHV Models - Circa 1951-62 Supplied as 2 pistons, complete with rings, gudgeon pins and circlips. Each piston...

headgk532
£9.95 (£11.94 inc VAT)
OEM: 71-4619
Cylinder Head Gasket Triumph 750cc 10 Hole, Compound T140, TR7 750cc. OEM 71-4619
+

filt059-B3
£9.95 (£11.94 inc VAT)
OEM: 70-9979, E9979
BSA B25, B50 Oil Sump Filter Gauze Stainless Steel Oil sump filter. 9mm hole OEM: 70-9979, E9979
+

gkch015
£2.95 (£3.54 inc VAT)
OEM: 70-7856
Primary Chaincase Gasket - BSA B44 (1968-70), B25, C25, B50 , Triumph TR25W, T25, B25, C25 This is for SOME models, please see our other gasket gkch004 for...
+

pump-gkt-unit-02
£1.00 (£1.20 inc VAT)
OEM: E11461, 71-1461
Triumph Unit Oil Pump Gasket 500cc, 650cc, 750cc etc OEM E11461, 71-1461
+

pump-gkt-preunit-03
£1.00 (£1.20 inc VAT)
OEM: E1537, 70-1537
Triumph Pre-Unit Oil Pump Gasket 70-1537 500cc, 650cc etc OEM E1537, 70-1537
+

vguide3208t
£9.45 (£11.34 inc VAT)
OEM: E3208, 70-3208, G461
Triumph Inlet / Exhaust Valve Guide - T20 Tiger Cub + 350/500cc Twins Circa 1957-66 - Standard or Oversize Suitable for both inlet and exhaust on many...

vguide3208b
£9.45 (£11.34 inc VAT)
OEM: 40-0133, 40-133, G461
BSA Inlet / Exhaust Valve Guide - C15, C15S, C15T Models Circa 1959-65 - Standard or Oversize Suitable for both inlet and exhaust on all C15 models....

off-gsprk401-13
£25.95 (£31.14 inc VAT)
OEM: 40-3041
BSA C15, B40 - 428 Chain Gearbox Sprocket - 13T, 14T, 15T, 16T or 18T - Talon Front sprocket suitable for BSA trials/competition models using standard...
 

pist1660
£121.95 (£146.34 inc VAT)
OEM: 65-1660, 65-1662, 65-1664
Gandini/GPM Piston - BSA B33/M33 Short Con Rod Models - Circa 1952-60 Supplied as 1 piston, complete with rings, gudgeon pin and circlips 2x 3/32"...

pist0630
£139.95 (£167.94 inc VAT)
OEM: 40-0630, 40-0632, 40-0634, 40-630, 40-632, 40-634
Gandini/GPM Piston - BSA C15 / BSA C25 - Circa 1959-67 Supplied as 1 piston, complete with rings, gudgeon pin and circlips 2x 1/16" Piston rings - 1st...

off-ren520-spring
£3.45 (£4.14 inc VAT)
520 Renthal R1 MX Chain Connecting Spring Link - 5/8" x 1/4" Pitch Split/master link for use with 520 Renthal R1 MX Chain - premium quality for trials,...
+

off-ren520
£76.95 (£92.34 inc VAT)
520 Renthal R1 MX Chain - Ideal For Trials/Motocross - 5/8" x 1/4" Standard Chain Top quality heavy duty non 'O' ring chain  designed specifically to...

off-ren428-spring
£2.95 (£3.54 inc VAT)
428 Renthal R1 MX Chain Connecting Spring Link - 1/2" x 5/16" Pitch Split/master link for use with 428 Renthal R1 MX Chain - premium quality for trials,...
+

off-ren428-134
£49.95 (£59.94 inc VAT)
428 Renthal R1 MX Chain - Ideal For Trials/Motocross - 1/2" x 5/16" Standard Chain - 134 Links Top quality heavy duty non 'O' ring chain  designed...
+

off-ren420-spring
£3.45 (£4.14 inc VAT)
420 Renthal R1 MX Chain Connecting Spring Link - 1/2" x 3/16" Pitch Split/master link for use with 420 Renthal R1 MX Chain - premium quality for trials,...
+

off-ren420
£34.95 (£41.94 inc VAT)
420 Renthal R1 MX Chain - Ideal For Trials/Motocross - 1/2" x 3/16" Standard Chain Top quality heavy duty non 'O' ring chain  designed specifically to...

studs602-B18
£10.95 (£13.14 inc VAT)
OEM: 21-1865, S1865, 71-3013, E13013
Triumph Cylinder Base Stud Set - 750cc Models - Circa 1973-82 Correct fitment on Triumph T140 and TR7 models. Set includes 8 cylinder base studs - 4x...
+

studs601-B14
£10.95 (£13.14 inc VAT)
OEM: 21-1865, S1865
Triumph Cylinder Base Stud Set - 650cc Models - Circa 1968-72 Correct fitment on Triumph T120 and TR6 models. Set includes 8 cylinder base studs - 12...
+

ch-ren06B3-half
£6.95 (£8.34 inc VAT)
OEM: 06B-3 SD, 116038
Renold Triplex Single Cranked Link/Half Link - 3/8" x 7/32" Pitch Single cranked link with split pin for use with 3/8" Renold Triplex chain  as used for...
+

ch-ren06B3-rivet
£3.95 (£4.74 inc VAT)
OEM: 06B-3 SD, 116038
Renold Triplex Connecting Rivet Link - 3/8" x 7/32" Pitch Rivet link for use with 3/8" Renold Triplex chain  as used for the primary drive chain on many...
+

ch-ren06B3-spring
£4.95 (£5.94 inc VAT)
OEM: 06B-3 SD, 116038
Renold Triplex Connecting Spring Link - 3/8" x 7/32" Pitch Split link for use with 3/8" Renold Triplex chain  as used for the primary drive chain on many...
+

ch-ren06B3-B12
£22.95 (£27.54 inc VAT)
OEM: 06B-3 BS, 116038, C321SR, 60-4125, 06-0366, 19-8692, 19-8639, 60-0699
Triplex Primary Chain With Spring Link - 3/8" x 7/32" Pitch - 76 to 96 Links Triplex chain 3/8" Pitch x 7/32" Width. Suitable as primary drive chain on...

nut6523-B13
£4.95 (£5.94 inc VAT)
OEM: 70-6523, E6523
Triumph Exhaust Camshaft Nut LH Thread - Unit 500/650/750cc Models - Circa 1970-87 Exhaust camshaft retaining nut on all 650/750cc twins from 1970 onwards...
+

plug3668-B13
£5.95 (£7.14 inc VAT)
OEM: 57-3668, 57-2167, T2167, T3668, 57-3851, T3851
Triumph Gearbox Oil Drain and Level Plug Assembly - Unit 650/750cc Models - 1968 Onwards Correct fitment on T120, TR6 and T140, TR7 unit twins from 1968...
+

bolt9330-B13
£0.95 (£1.14 inc VAT)
OEM: 70-9330, E9330
Triumph Oilway Plug Bolt - 650/750cc Unit Twins From 1968 Onwards Crankcase timing side oil way plug as fitted to T120, TR6 models from 1968 onwards + all...
+

pist23175
£129.95 (£155.94 inc VAT)
OEM: NM23175, A2-161, A2-164, 19776
Norton Piston - ES2, Model 18, 500T - Circa 1956-63 - Gandini/GPM Supplied as 1 piston, complete with rings, gudgeon pin and circlips. Flat head with...

tappet-GS36-B18
£22.95 (£27.54 inc VAT)
OEM: 70-1477, E1477
Triumph Alloy Tappet Guide Block - 500cc Pre Unit T100 and TR5 Models - Circa 1952-59 Tappet block for the cam followers, suitable for the following...
+

rings100
£37.95 (£45.54 inc VAT)
OEM: R13570
Pair of Hepolite Piston Rings for Triumph 500cc T100 Models Circa 1958-74 Supplied as 2 sets of Hepolite piston rings. Bore Size: 69mm standard,...

conrod1450H-B21
£129.95 (£155.94 inc VAT)
OEM: 70-1450, E1450
Triumph Small Journal Conrod / Connecting Rod - Pre Unit 500/650cc Models Circa 1938-56 Forged alloy with steel caps as originally used on 5T, 6T, T100,...
+

gk-1541
£0.95 (£1.14 inc VAT)
OEM: 57-1541, T1541
Triumph Gearbox Inspection Cover Gasket - Pre Unit Models Circa 1958-62 Correct fitment on 6T, T100, T110, TR6 and T120 pre-unit models. OEM: 57-1541, T1541
+

nut3120-B14
£5.45 (£6.54 inc VAT)
OEM: 70-3120, E3120
Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59 Engine sprocket nut as used on pre-unit T100, TR5, T110, TR6 and...
+

gk-1920
£2.45 (£2.94 inc VAT)
OEM: 66-1920
BSA Timing Case Outer Cover Gasket - B and M Group Models Circa 1939-63 Correct fitment on B31, B32, B33, B34, DBD34, M20, M21 and M33 models. OEM: 66-1920
+

gkch4100
£2.45 (£2.94 inc VAT)
OEM: 70-4100, 70-4871, E4100, E4871
Triumph T20 Tiger Cub Primary Chaincase Cover Gasket Suitable for the  later distributor and points in side models circa 1960-68. OEM: 70-4100, 70-4871,...
+

gk3345
£1.45 (£1.74 inc VAT)
OEM: 70-3345, 70-4872, E3345, E4872
Triumph T20 Tiger Cub Right Hand Timing Case Outer Cover Gasket RH side timing case outer cover gasket correct fitment on T15 and T20 models from 1954...
+

plug0615-B18
£6.45 (£7.74 inc VAT)
OEM: 65-0615, 65-615
BSA Small Journal Crankshaft Sludge Trap Plug - A7 and A10 Models Circa 1947-62 To fit small journal crankshafts as used on A7 models from 1947-62 and A10...
+

off-sump001
£37.95 (£45.54 inc VAT)
Sump Guard / Bash Plate - Triumph Tiger Cub Trials Bikes + Universal Use Designed in association with Sammy Miller, specifically for Triumph Tiger Cub...
+

wash3887
£0.45 (£0.54 inc VAT)
OEM: 70-3887, E3887
Triumph Oil Pump Mounting Serrated Washer - Conical Type - 350/500/650/750cc Unit Twins Correct for all unit twins - 3TA, 5TA, T90, T100, 6T, TR6, T120,...
+

fkchainsss428
£9.95 (£11.94 inc VAT)
OEM: 110046
428 Standard Classic Motorcycle 126SR 1/2" x 5/16" Chain - Triple SSS - 100 to 130 Links Supplied with a connecting spring link. 126SR 1/2" x 5/16" (P x...

fkchainsss530
£18.95 (£22.74 inc VAT)
OEM: 110056
530 Standard Classic Motorcycle 136SR 5/8" x 3/8" Chain - Triple SSS - 100 to 120 Links Supplied with a connecting spring link. 136SR 5/8" x 3/8" (P x W)...

piston-rings-789
£35.95 (£43.14 inc VAT)
OEM: 71-3690, 71-3695, 99-3791, 99-3792, 99-3789, 71-3692, 71-3697
Engine Set of Harris Piston Rings for Triumph 750cc models - TR7, T140 etc (1974-). Supplied as 2 sets of Piston Rings = Top ring, 2nd Ring, Oil Scraper...

fkclutch268-B23-UK
£5.95 (£7.14 inc VAT)
OEM: 57-3931, T3931, 68-3278
Triumph/BSA Clutch Thrust Washer - Bronze Faced - Later Unit 500/650cc Models Fits Triumph T100, TR6 and T120 models from 1970 onwards + BSA 3 spring...
 

nut0702-B14
£1.45 (£1.74 inc VAT)
OEM: 14-0702
Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...
+

camshaft3275-B7
£68.95 (£82.74 inc VAT)
OEM: 70-3275, E3275
Triumph Inlet / Exhaust Camshaft - Pre Unit 500/650cc Models - Cast Iron Head Correct fitment on 5T, TR5, T100 and 6T models circa 1953-62. Nitrided...
+

gearbox3978-B13
£0.65 (£0.78 inc VAT)
OEM: 57-3978, T3978
Triumph Gearbox Camplate Index Plunger Washer - 650/750cc Twins and Triples Correct fitment on T120, TR6, T140, T150 and T160 models from 1970 onwards....
+

gearbox4459-B13
£0.95 (£1.14 inc VAT)
OEM: 57-4459, T4459
Triumph Gearbox Camplate Index Plunger Spring - 750cc Twins and Triples Correct fitment on T140, T150 and T160 models from 1973 onwards. Length...
+

nut3955-B14
£0.65 (£0.78 inc VAT)
OEM: 82-3955, F3955
3/8" CEI Self-Locking Nyloc Nut 3/8" CEI self-locking nyloc nut. deep type - 26TPI OEM: 82-3955, F3955
+

nut1463-B13
£8.95 (£10.74 inc VAT)
OEM: 70-1463, E1463
Triumph Inlet Camshaft Oil Pump Drive Nut - Pre Unit 500/650cc Twins - Circa 1946-61 Correct fitment for earlier pre-unit twins -  3TA, 5T, T100, 6T,...
+

gear0066
£725.95 (£871.14 inc VAT)
OEM: 57-4396, 57-4909, 57-7077, 57-4779, 57-4376, 57-4377, 57-4653, 57-4900, 57-4647, 57-4657, 57-4654, 57-4661, 57-4364, 57-4366, 57-4660, 57-3989, 57-4889
Triumph Complete 5 Speed Gearbox Cluster - 650/750cc Twins Complete 5 speed gearbox - mainshaft and gears, layshaft and gears, selectors and camplate....
+

piston-rings-784
£35.95 (£43.14 inc VAT)
OEM: CP.99, CP99, E6864, E6865, 70-6864, 70-6865, E2897, 70-2897, E3049, 70-3049, E2898, 70-2898
Engine Set of Harris Piston Rings for Triumph 650cc models - TR6, 6T, T120 etc (1959-75). Supplied as 2 sets of Piston Rings = Top ring, 2nd Ring, Oil...

shaft4260-B7
£94.95 (£113.94 inc VAT)
OEM: 15-4260
BSA Gearbox Mainshaft - B31, B32, B33, B34, M20, M21 - Circa 1949-62 Suitable for BSA B and M group models - plunger and rigid frame. Genuine new old...
+

gkch0503
£3.45 (£4.14 inc VAT)
OEM: 57-0503, T503
Triumph Pre Unit Primary Chaincase Gasket - 3T, TR5, T85 - Circa 1946-54 Fits 3T models from  1946-51, TR5 models from 1951-54 and T85 from 1946. Made...
+

gkch1057
£3.45 (£4.14 inc VAT)
OEM: 57-1057, T1057
Triumph Pre Unit Primary Chaincase Gasket - 5T, 6T Alternator Models - Circa 1953-54 Fits 500/650cc pre-unit rigid frame models with the long alternator...
+

wash1045-B23
£6.95 (£8.34 inc VAT)
OEM: 57-1045, T1045, 42-3190, 68-3025, 68-3169
Triumph / BSA Clutch Mainshaft Cupped Washer - 350/500/650cc Twins Circa 1953-1967 Clutch to mainshaft washer for models with a 3 or 4 spring clutch. BSA...
+

nut0643-B18
£4.95 (£5.94 inc VAT)
OEM: 67-0643, 67-643
BSA Crankshaft Timing Side Pinion Drive Nut - A50, A65, A7, A10 Models - LH Thread Half time pinion gear locknut as used on all BSA A50/A65 models from...
+

bolt2603-E2
£2.95 (£3.54 inc VAT)
OEM: 82-2603, F2603
Triumph Side Stand Bolt / Manifold Carb Mounting Bolt - Reduced Head Reduced hex head bolt - correct fitment to mount the prop stand on pre unit models...
+

stud1536-B13
£2.25 (£2.70 inc VAT)
OEM: 70-1536, E1536
Triumph Crankcase to Oil Pump Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil pump body to crankcase fixing stud - Correct fitment on pre-unit twins...
+

sprock0010/17-B5
£28.95 (£34.74 inc VAT)
OEM: 04-0010, 040010
AMC / Norton Gearbox Sprocket 17T - Dolls Head Gearbox - 5/8" x 1/4" Suits AMC, Norton 16H, early ES2, Model 18 bikes from 1956 onwards with Dolls Head...
+

gear1327-B4
£2.45 (£2.94 inc VAT)
OEM: 041327, 04-1327
Gear Change Spring Selector Pawl - AJS, Matchess and Norton Lightweights - Circa 1959 Gear change spring selector pawl for AMC lightweight models - pre...
+

kick50-G3
£39.95 (£47.94 inc VAT)
OEM: 57-3797, T3797, 57-4760, T4760
Triumph Kickstart Lever Assembly - Unit 350/500cc Twins Circa 1968-74 - Longer Type Correct fitment on later T90 and T100 models from 1968-74. Tiger...
+

sump221B-B3
£41.95 (£50.34 inc VAT)
OEM: 67-1285, 67-1286
BSA Sump Plate - A7/A10/A50/A65 Models CNC manufactured from solid billet alloy Finned alloy sump plate with magnetic drain plug. Supplied with magnetic...
+

filt582-SS-B3
£23.95 (£28.74 inc VAT)
OEM: 42-8334, 42-8426
BSA Oil Tank Filter - Pre Unit A, B and C Group Models - Circa 1954-63 Oil tank filter and drain plug. Correct fitment for BSA A7, A10, B31 and B33...
 

tapp5861-B13
£19.95 (£23.94 inc VAT)
OEM: 70-5861, E5861
Triumph Exhaust Tappet Guide Block - 650cc Models - T120, TR6 Circa 1965-68 Exhaust tappet block for the cam followers. Triumph 650cc models T120, TR6...
+

clip1386-B13
£1.95 (£2.34 inc VAT)
OEM: 90-1386
BSA Piston Pin Circlips - Bantam Models - D5, D7, D10, D14 - Pair 2x circlips for BSA Bantam models, as listed. Secures the gudgeon / wrist pin. OEM:...
+

sprock428H-B5
£23.95 (£28.74 inc VAT)
OEM: 57-1476, T1476
Triumph 18T Gearbox Sprocket - 350/500cc Unit Twins From 1959-74 Front drive sprocket to fit 350/500cc unit twins - T90, 3TA, 5TA, T100 etc. Chain...
+

sprock474H-B5
£23.95 (£28.74 inc VAT)
OEM: 57-1476, T1476
Triumph 19T Gearbox Sprocket - 350/500cc Unit Twins From 1959-74 Front drive sprocket to fit 350/500cc unit twins - T90, 3TA, 5TA, T100 etc. Chain...
+

gkch1313
£3.95 (£4.74 inc VAT)
OEM: 57-0504, T504
Triumph Pre-Unit Primary Chaincase Gasket - Long Dynamo Type - Rigid Frame - 1939-53 Fits 500/650cc pre-unit rigid frame dynamo or mag/dyno models from...
+

fkscrew211-B9
£13.95 (£16.74 inc VAT)
OEM: 14-6606, 14-6608, 14-6610, 14-6611, 14-6612, 14-6614, 40-0236
Stainless Steel Allen Screw Kit - BSA B50 Models Complete set, includes two allen keys and all required UNC stainless steel hex screws. OEM: 14-6606,...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.