.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

kick50-G3
£39.95 (£47.94 inc VAT)
OEM: 57-3797, T3797, 57-4760, T4760
Triumph Kickstart Lever Assembly - Unit 350/500cc Twins Circa 1968-74 - Longer Type Correct fitment on later T90 and T100 models from 1968-74. Tiger...
+

nut267-B18
£5.45 (£6.54 inc VAT)
OEM: 71-2800, 68-0184
Triumph T120/T140 (1968-) Hexagonal crank plug, UNF threads. Also fits some BSA A50 and A65 models Made in England. OEM: 71-2800, 68-0184
+

pipe5370-B13
£8.95 (£10.74 inc VAT)
OEM: 70-5370, E5370
Triumph Oil Tank Crankcase Breather 'T' Piece - 500/650cc Unit Twins - 1967-70 Crankcase to oil tank breather hose fitting. OEM: 70-5370, E5370
+

pist510
£148.95 (£178.74 inc VAT)
One JP Piston for Ariel Red Hunter 350cc 1939-1955 Supplied as 1 Piston, complete with rings, gudgeon pin and circlips. Bore Size : 72mm Standard,...

fkgk315-SS
£43.95 (£52.74 inc VAT)
BSA Motorcycle - 500cc A7 Shooting Star Engine Gasket Set 1954-62
+

tapp5861-B13
£19.95 (£23.94 inc VAT)
OEM: 70-5861, E5861
Triumph Exhaust Tappet Guide Block - 650cc Models - T120, TR6 Circa 1965-68 Exhaust tappet block for the cam followers. Triumph 650cc models T120, TR6...
+

TP-3223-210
£4.95 (£5.94 inc VAT)
OEM: 70-3223, E3223
Triumph Tappet Adjuster - 350/500cc Unit Models - Circa 1959-74 - Various Options Rocker adjusting pin - correct fitment on unit 3TA, 5TA, T90 and T100...
 

pist247
£249.95 (£299.94 inc VAT)
Pair of JP Piston for AJS 31CSR 650cc 1960-1966 Suit Matchless G12 models also. Supplied as 2 Pistons, complete with rings, gudgeon pin and circlips. Bore...

guide135-B22
£9.45 (£11.34 inc VAT)
OEM: 01-7019, 01-4510
AJS and Matchless - Valve Guide - 01-7019, 01-4510 AJS 16, 16M, 16MC, 16MCS, 18, 18C, 18CS Matchless G3L, G3LS, G3LCS, G80, G80S, G80CS Used on some...
+

fkpipe035
£0.95 (£1.14 inc VAT)
Breather / Overflow Hose - 3.5mm Bore, 6mm Diameter - Black Rubber Carburettor overflow or breather pipe - s uitable for low pressure uses only. OD: 6mm...
+

tab-0685-B18
£0.95 (£1.14 inc VAT)
OEM: 67-0685, 67-685
BSA Camshaft Pinion Tab Washer - A7, A10, A50 and A65 Models Camshaft pinion lockwasher - correct fitment on A7 and A10 models circa 1947-62. Also used...
+

seal6299
£0.65 (£0.78 inc VAT)
OEM: 70-6299, E6299, 40-0418, 57-3620, 70-7431, E7431
Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards O ring seal for the adjuster plug as used on all unit twins from...
+

sprock654-B5
£19.95 (£23.94 inc VAT)
OEM: 57-1715
Triumph T120, T110, T6, 5T Pre Unit models (1947-62) Chain Pitch: 5/8" x 3/8" (530) Number of Teeth: 19 OEM: 57-1715, T1715, T471A, 57-0471
+

c/s-tube3903-B13
£9.95 (£11.94 inc VAT)
OEM: 70-3903, E3903, 68-0185, 68-185
Triumph/BSA Crankshaft Sludge / Oil Tube - 500/650/750cc Twins Circa 1959-82 Crankshaft oil tube, sludge trap - correct fitment on pre unit T100, 6T,...
+

stud2813
£3.25 (£3.90 inc VAT)
OEM: 71-2813, E12813
Triumph - Inlet Manifold Stud - 650/750cc Unit Twins - 1972-78 Suitable for 650/750cc Unit Twins from 1972-78 with bolt-on inlet manifolds Overall...
+

screwkit-82-B9
£26.95 (£32.34 inc VAT)
OEM: 70-3668, E3668, 70-3204, E3204, 57-1779, 70-3802, E3802, 70-4806, E4806
Posi Drive Engine/Gearbox Screw Kit - Triumph Unit Twins - 1963-68 To fit all 650cc Unit twins from 1963-68 - TR6, T120 Stainless Steel - BSF Thread...
+

pinion3376-B4
£45.95 (£55.14 inc VAT)
OEM: 67-3376
BSA Kickstart Ratchet Pinion - A, B and C Group Models Circa 1954-62 17T kickstarter pinion as used on all A7, A10, C10L and C12 models circa 1954-62....
+

inlet3338/9
£33.95 (£40.74 inc VAT)
OEM: 71-3338, 71-3339, E13338, E13339
Triumph - Pair of Inlet Manifolds Left and Right Side - T140 - 1973-78 For use with a 30mm Amal carburettor Correct threaded hole to adapt the breather...
+

fkgk850
£29.95 (£35.94 inc VAT)
Velocette Motorcycle - 200cc LE Twin Engine Gasket Set 1951-58. Velocette LE 200cc Twin Engine Gasket Set from 1951 to 1958. Made in England Includes...
+

oilseal0749-met
£2.45 (£2.94 inc VAT)
OEM: 90-0749, 90-749
BSA Bantam Crankshaft Drive Side / Timing Side Oil Seal - All Models D1, D3, D5, D7, D10, D14 and B175 Crankshaft drive side and timing side oil seal on...
 

crod382-Billet
£204.95 (£245.94 inc VAT)
OEM: 70-9915, 70-4001
Triumph T100 Connecting Rod Billeted Con Rod, made in USA Quality Connecting Rod, connects crankshaft to piston. OEM: 70-9915, 70-4001
+

spring3724-B13
£1.75 (£2.10 inc VAT)
OEM: 70-3724, E3724
Triumph Oil Sump Filter Retaining Spring - 350/500cc Models OD: 7/16" (10.6mm) Length uncompressed: 7/16" (10.8mm) OEM: 70-3724, E3724
+

pist311
£82.95 (£99.54 inc VAT)
OEM: 06-3838, 19342
Pair of Hepolite Pistons for Norton Commando 850cc models etc (1973-77). Supplied as 2 Pistons, complete with Hepolite rings, gudgeon pins and circlips. Bore...

fkgk156x
£31.95 (£38.34 inc VAT)
AJS - 650cc 31 Engine Gasket Set - 1959 Only Full engine gasket set as shown in the photos
+

pist263jp
£277.95 (£333.54 inc VAT)
Pair of JP Pistons for Norton Dominator 600/650cc models (1961-70). Supplied as 2 Pistons, complete with JP rings, gudgeon pins and circlips. Bore Size :...

piston6884
£96.95 (£116.34 inc VAT)
OEM: 70-6884
Harris Pistons for Triumph T100 500cc - 70-6884 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin, Ring set...

fkgk269
£44.95 (£53.94 inc VAT)
Norton Motorcycle - 750cc Commando Fastback (Copper Head Gasket) Engine Gasket Set 1968-73 Norton Commando 750cc Fastback (with Copper Head Gasket) - Engine...
+

valve034-B22
£16.95 (£20.34 inc VAT)
OEM: 65-1111
BSA B31, B32 (1950-59) Inlet Valve - Hepolite - 65-1111 BSA B31, B32 (1950-59) Inlet Valve Alpha valve number V42. OEM: 65-1111
+

valve044-B2
£16.95 (£20.34 inc VAT)
OEM: E3310, 70-3310
Triumph 650cc Inlet Valve - 70-3310 T110, TR6 (1954-57) TR6, 6T, T110 Thunderbird (1958-66) T120 Bonneville (1959-63) Inlet Valve (Alpha valve no.V137)...
+

gk-cg01
£11.95 (£14.34 inc VAT)
OEM: E1650, 70-1650, E1577, 70-1577, 70-1335, E1335, E3075, 70-3075, NA43, F1880, 82-1880
Triumph 5T, 6T Pre-unit Iron Head Rocker Box Gasket Set up to 1961 Comprises of 10 gaskets and several washers Includes 2 carb manifold gaskets, 1 is for...
+

fkgk210
£19.95 (£23.94 inc VAT)
Ariel Motorcycle - 500cc VH, VHA, VCH Engine Gasket Set 1952-55
+

studset426-B14
£9.95 (£11.94 inc VAT)
OEM: 70-2980, E2980, 31-0222, 70-8012, 70-3302, 82-0879, F879
Triumph Rocker Box Stud and Nut Set - 650cc Unit Models Circa 1963-70 Rocker box to cylinder head - six studs, washers and nuts. Correct fitment on 650cc...
+

valve035-B22
£22.95 (£27.54 inc VAT)
OEM: 65-1110
BSA B31, B32 Exhaust Valve - Hepolite - 65-1110 BSA B31, B32 (1950-59) Exhaust valve. Alpha valve number V43. OEM: 65-1110
+

fkgk200b
£22.95 (£27.54 inc VAT)
Ariel Motorcycle - 350cc NG WD Engine Gasket Set 1938-51
+

clutch139-B23
£7.95 (£9.54 inc VAT)
OEM: 04-0386, 04-0387
Norton/AMC clutch cush drive rubber set Set of 6 cush drive rubbers rubbers  - three large and three small. OEM: 04-0386, 04-0387 Made in England
+

plug3668-B13
£5.95 (£7.14 inc VAT)
OEM: 57-3668, 57-2167, T2167, T3668, 57-3851, T3851
Triumph Gearbox Oil Drain and Level Plug Assembly - Unit 650/750cc Models - 1968 Onwards Correct fitment on T120, TR6 and T140, TR7 unit twins from 1968...
+

bolt0543-B18
£0.95 (£1.14 inc VAT)
OEM: 21-0543, S543
Triumph Gearbox Oil Level Drain Plug Bolt - 650/750cc - 1970 Onwards Triumph later T120, TR6 and T140, TR7 Unit Twins from 1970 onwards + Trident models...
+

fkgk059
£12.95 (£15.54 inc VAT)
OEM: E3552, 70-3552, E1577, 70-1577, E1335, 70-1335, NA43A
Triumph Rocker Box Gasket Set. Pre-Unit Triumph T120, TR6, T110 Suit T120 Bonneville, TR6, T110 circa 1936-61. Comprises of 4 Gaskets and 8 Washers OEM:...
+

kick3162-B4
£1.45 (£1.74 inc VAT)
OEM: 67-3162
BSA Kickstart Ratchet Spring - A, B, C Group Plunger and Swinging Arm + A50 and A65 Models Gearbox mainshaft pinion spring locates between the kickstarter...
+

wash8896
£0.45 (£0.54 inc VAT)
OEM: 70-8896, E8896
Triumph/BSA Timing/Tacho Drive Plug Alloy Washer - Unit Singles and Twins From 1968 Onwards Crankcase timing aperture plug and/or tacho drive plug alloy...
+

gasket442
£1.25
OEM: 57-2442, 71-1457
Triumph Rotor Inspection Cover Gasket - Late Unit Twins - 1965 onwards Triumph 350/500/650cc Unit Twins + T140 Bonneville and TR7 models OEM: 57-2442,...
+

rollers192-B18
£2.99 (£3.59 inc VAT)
1/4" x 1/4" Big End Rollers Sold in packs of 10 rollers
+

vvg426
£99.95 (£119.94 inc VAT)
OEM: 71-7201, 71-7202, 70-4603, 70-2904
Triumph T140 Bonneville/TR7 (1979 Onwards) Complete Valve guide set. Includes guides and valves. Valve Guides : Set of 4 Bronze Guides (71-7201 and 71-7202)...
+

dowel1532-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1532, E1532
Triumph Oil Junction Block / Tappet Oil Feed Dowel - Pre Unit Twins - 1939-62 + Unit 650/750cc Models Oil junction block to crankcase hollow dowel -...
+

off-esprk418
£25.95 (£31.14 inc VAT)
OEM: 40-0582, 40-582
BSA C15/B40 - Duplex Engine Primary Drive Sprocket - 18T Crankshaft sprocket for BSA C15, C25, B25 and B40 trials/competition models. You will need to...
+

fkrub32
£1.99 (£2.39 inc VAT)
Triumph Cub Kickstart Rubber Not Branded Open End. Hole size: 3/8" Length: 2+1/2"
+

clutch3919-B25
£114.95 (£137.94 inc VAT)
OEM: 65-3919
BSA Clutch Chainwheel - 43T, 6 Spring 2 Plate Type - C10/C11 from 1946-53 Suitable for BSA Rigid & Spring C10/C11 models from 1946-53 - 3 & 4...
+

bolt113-B19
£3.95 (£4.74 inc VAT)
OEM: 70-4456
Triumph T90/T100 Cylinder head bolt (outer with extended hexagon). High Tensile 3/8" x 2-3/4" 26TPI bolts. OEM: 70-4456
+

bolts213-B14
£21.95 (£26.34 inc VAT)
OEM: 00-0122, 67-254, 67-0254, 67-258, 67-0258, 67-283, 67-0283
BSA A7/A10 Iron head cylinder head bolt set (9 Piece set) OEM: 00-0122, 67-254, 67-0254, 67-258, 67-0258, 67-283, 67-0283
+

clplt333-B24
£8.45 (£10.14 inc VAT)
OEM: 3370-36
Steel Clutch Plates - Burman, Ariel, Panther, Vincent  - Surflex Inside Diameter: 109mm(between stubs) Outside Diameter: 170mm Stub Length: 6mm Made by...
+

pipe848-B3
£39.95 (£47.94 inc VAT)
OEM: 42-8344, 42-8345
BSA B Group (B31, B32, B34) armoured oil feed and return pipes (under gearbox routing) Comes as 2 pipes, approx 20" and 21" long, ready to fit. These route...
+

smallend134-B8
£12.95 (£15.54 inc VAT)
OEM: 6-0492, SE13
BSA Singles Small End Bearing - 66-0492 B31, B32, B33, B34, B40, SS90, B44, B50, M33, M22, M23, M24 (1937-66) Small end bush, piston pin bush, gudgeon pin...
+

fkrub1814
£1.95 (£2.34 inc VAT)
OEM: 82-1814, F1814
Triumph Embossed Kickstart Rubber - Closed End Type Suitable for all models except T20 Tiger Cub. Closed end type as generally used on pre unit and unit...
+

wash1612
£0.15 (£0.18 inc VAT)
OEM: 70-1612, E1612, 70-2312, E2312
Triumph 1/4" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit Models Shakeproof serrated washer as used to secure bolts - engine,...
+

bear025-F4
£9.95 (£11.94 inc VAT)
Ball Bearing RLS5 - 4203-2RS Range of uses including wheel bearing, transmission and engine bearing. OD: 40mm ID: 17mm Width: 16mm
+

valv220b-B17
£14.95 (£17.94 inc VAT)
OEM: 67-0439, 67-0440
Valve Spring Set - BSA A7, A10 (1947-62) Iron Head models (Terry no.VS 454) Valve Spring Set. Includes 4 inner springs (67-0440) and 4 outer springs...
+

pist038
£229.95 (£275.94 inc VAT)
Set of JP Pistons for BSA A65 Star 650cc models (1962-65). Supplied as 2 Pistons, complete with rings, gudgeon pins and circlips. Bore Size : 75mm...

nut0702-B14
£1.45 (£1.74 inc VAT)
OEM: 14-0702
Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...
+

fkchainsss525
£24.95 (£29.94 inc VAT)
Classic Motorcycle Chain Heavy Duty SSS 525 - 102 to 128 links 5/8" x 5/16" (P x W) Comes with a connecting Link 137RS 5/8" x 5/16" Heavy Duty 525 chain...

bear415-F4
£46.95 (£56.34 inc VAT)
OEM: E9493, 70-9493, 01-7824, 017824
Crankshaft Roller Bearing Drive side for Triumph 5TA/T100/TR5 500cc Unit twins (roller race 1968-) Norton Dominator/Model 7, 500,600,650cc models. OEM:...
+

headgk047
£15.95 (£19.14 inc VAT)
OEM: 70-4674, E4674, 70-3769, E3769
Triumph Cylinder Head Gasket - 350cc Unit Twins Circa 1957-69 Solid copper head gasket - suitable for 3TA, T21, T90 models circa 1957-69. Available in...

fkgk325c
£43.95 (£52.74 inc VAT)
BSA Motorcycle - 650cc Road Rocket, Super Rocket (Copper Head Gasket) Engine Gasket Set 1956-63
+

spr034-B24
£1.95 (£2.34 inc VAT)
OEM: 57-1560
Triumph Clutch Spring, for Triumph 350cc, 500cc (Late 3 Spring models) Price is for One Spring Length: 2" (50mm) Diameter: 5/8" (16mm) OEM: 57-1560
+

pist308jp
£144.95 (£173.94 inc VAT)
One JP Piston for Norton Model 50 350cc models (1956-63). Supplied as 1 Piston, complete with JP rings, gudgeon pins and circlips. Bore Size : 71mm...

off-gsprk402/428
£27.95 (£33.54 inc VAT)
OEM: 57-1555, T1555
Triumph T20 Tiger Cub  - 428 Chain Gearbox Sprocket - 13T or 14T - Talon Front sprocket suitable for Triumph Tiger Cub trials/competition models using...
 

seal1497
£1.25 (£1.50 inc VAT)
OEM: 70-1497, 70-3547, E1497, E3547
Triumph Push Rod Tube Top Seal - Fibre Type - 350/500/650cc Pre Unit and Early Unit Twins Fibre upper push rod joint washer as used on various models...
+

pist288-rings
£44.95 (£53.94 inc VAT)
OEM: R3650
Set of Hepolite Piston Rings for BSA A10 650cc models etc (1952 - 63). Supplied as Hepolite Rings for 2 Pistons. Bore Size : 70mm Standard, available as...

stud2962-B13
£1.95 (£2.34 inc VAT)
OEM: 70-2962, E2962
Triumph - Inlet Manifold To Carburettor Stud - 500/650cc Twins from 1952-69 Length: 1+1/4" (32mm) Diameter: 5/16" (7.7mm) BSW/CEI threads OEM:...
+

clutch170-B23
£1.45 (£1.74 inc VAT)
OEM: 41-3212, 57-2723, 41-3211
BSA Unit Singles Clutch Cush Rubber - B25, B40, B44, B50, C15 Clutch cush rubber as used on 4 plate clutches on BSA unit singles circa 1959-70 + Triumph...
+

valv223-B17
£14.95 (£17.94 inc VAT)
OEM: 40-0168, 40-0169
Valve Spring Set - C15SS, SS80 (1960-66) SS90 (1962-66) B44 (1965-69) B50 (1971-72) B32, B34 G/Star club (1955-) Includes 2 inner springs and 2 outer...
+

bear425-F4
£8.95 (£10.74 inc VAT)
OEM: 29-3857, 57-0665, 70-8014, T665, E8014
High Gear Bearing - BSA 250cc Singles, Triumph 350/500 Unit Twins + TR25/W, Royal Enfield 350/500/750cc Suitable for the following models: BSA 250cc...
+

clip425-B18
£1.95 (£2.34 inc VAT)
OEM: 70-4609, E4609
Triumph T120, TR6 models Rocker cover inspection Cap Spring Retaining Clip OEM: 70-4609, E4609
+

piston7086
£92.95 (£111.54 inc VAT)
OEM: 71-7086
Harris Pistons for Triumph T140, TR7T 750cc - 71-7086 For low compression 750cc, perfect for Unleaded Fuel use. Pair of high quality pistons, Made in...

fkgk814Cz
£33.95 (£40.74 inc VAT)
Triumph Motorcycle - 500cc Speed Twin, 5TA (Thin Copper Head Gasket) Engine Gasket Set 1958-66 Triumph Speed Twin, Triumph 5TA with Thin Copper Head Gasket...
+

valve017-B22
£17.95 (£21.54 inc VAT)
OEM: A2-141, A3-142, V37
Inlet & Exhaust Valve - Norton 18, 19, ES2, 500T from 1935-63 - A2-141, A3-142 Norton 18, 19, ES2, 500T (1935-63) Inlet & Exhaust Valve Head...
+

valve0235-B22
£33.95 (£40.74 inc VAT)
OEM: 66-0235
BSA M20, M21 Inlet Valve Alpha valve number V19 Made in England OEM: 66-0235
+

guide0139-B17
£15.95 (£19.14 inc VAT)
OEM: 66-0139
BSA M20, M21 Exhaust Valve Guide Alpha valve number G433 Made in England OEM: 66-0139, 66-139
+

pipeGS272W-B3
£14.95 (£17.94 inc VAT)
OEM: GS272, 70-1503, E1503, 70-0004
Triumph Rear/Inlet Rocker Box Drain Pipe - Pre-Unit 500/650cc Models - 1938-62 Inlet rocker box oil drain pipe and banjo assembly to fit all 500/650cc...
+

pist-16945
£39.95 (£47.94 inc VAT)
OEM: 40-0970, 70-7998, E7998, 16945
Hepolite Piston - BSA/Triumph Unit Singles - B25, C25, TR25 Models Circa 1967-71 Suitable for 250cc singles with the square alloy barrel - B25, C25 and...

fkgk806
£31.95 (£38.34 inc VAT)
Triumph Motorcycle - 500cc Tiger 100, TR5 Engine Gasket Set 1951-58
+

shim0066-B18
£6.95 (£8.34 inc VAT)
OEM: 40-0065, 40-0066, 40-0069, 40-66, 40-69
BSA Crankshaft Shim Set - Unit Singles - C15, B25, B40, B44, B50 Also used to shim between the alternator and crankshaft on A50 and A65 models. Set of 5...
+

vguide3827
£11.95 (£14.34 inc VAT)
OEM: 70-3827, E3827, G420PB
Triumph Inlet Valve Guide - T120 Bonneville Models Circa 1959-72 - Standard or Oversize Length: 1+31/32", 1.97" (50.1mm) Available as standard, +.002...

clip238H-B18
£1.45 (£1.74 inc VAT)
OEM: 70-4671, E4671
Triumph Unit models Rocker cover inspection Cap Spring Retaining Clip OEM: 70-4671, E4671
+

vvg425
£99.95 (£119.94 inc VAT)
OEM: 71-3294, 71-3295, 70-4603, 70-2904
Triumph T140 Bonneville/TR7 750cc (1973-78) Complete Valve guide set. Includes guides and valves. Valve Guides : Set of 4 Bronze Guides (71-3294 and 71-3295)...
+

wash1738
£0.45 (£0.54 inc VAT)
OEM: 57-1738, T1738, 02-0100, GS761
Triumph Primary Adjuster Drain Plug Fibre Washer - 350/500/650cc Models Circa 1961-74 Drain and adjuster plug fibre washer - correct fitment on 3TA, 5TA,...
+

spr971H-B24
£1.95 (£2.34 inc VAT)
OEM: 57-4644
Triumph Clutch Spring, for Triumph T140, TR7 (1973-85) Clutch spring for 3 and 4 spring clutches. Length: 1+3/4" (45mm) Diameter: 21/32" (17mm) Price is...
+

fkgk062
£13.95 (£16.74 inc VAT)
OEM: E9511, 70-9511, E3751, 70-3751, E1335, 70-1335, NA43, F1880, 82-1880
Triumph Rocker Box Gasket Set. For the later engine models Suit 3TA, T21, 5TA, T100, 350/500cc (1966 -) OEM: E9511, 70-9511, E3751, 70-3751, E1335,...
+

seal087
£1.25 (£1.50 inc VAT)
OEM: 71-1070
O RING - BSA and Triumph BSA, Triumph Rocket 3, Trident (cap seal) OEM: 71-1070
+

wash2521-B13
£1.25 (£1.50 inc VAT)
OEM: 65-2521
BSA Engine Mainshaft Lock Washer - B31, A10, A7 ID for shaft size 7/8" OD: 1+9/16" Made in England OEM: 65-2521
+

piston3610
£89.95 (£107.94 inc VAT)
OEM: 70-3610, 70-3610/20, 70-3610/40, 70-3610/60, E3610, E3610/20, E3610/40, E3610/60, CP157
Harris Pistons for Pre-Unit Triumph T110 650cc - 70-3610 Pair of high quality pistons, Made in England by LF Harris. Includes the pistons, Gudgeon pin,...

stud2109-B19
£1.95 (£2.34 inc VAT)
OEM: 21-2109, S2109
Triumph /BSA Sump Plate Stud - OIF Models from 1971 Sump plate to frame stud 5/16" x 24TPI x 1" UNF OEM: 21-2109, S2109
+

chainsss530-HD
£25.85 (£31.02 inc VAT)
Classic Motorcycle Chain HEAVY DUTY SSS 530 - 100 to 120 links 5/8" x 3/8" (P x W) Supplied with a rivet link. This is a HEAVY DUTY version of the...

seal7565
£1.95 (£2.34 inc VAT)
OEM: 70-7565, E7565
Triumph Clutch Back Plate Oil Seal - 500/650cc Unit Models from 1968 Onwards Gearbox sprocket cover plate oil seal. Correct fitment for T120 and TR6...
+

clutch3274
£8.95 (£10.74 inc VAT)
OEM: 42-3274
BSA 12" Clutch Push Rod - 4 Spring Clutch - A10 Super Rocket and RGS Models + Conversions Hardened steel clutch operating rod - correct fitment on A10 SR...
+

crod381
£204.95 (£245.94 inc VAT)
OEM: 06-4896, NM25369
Norton Commando 750, 850 Connecting Rod Billeted Con Rod, made in USA Quality Connecting Rod, connects crankshaft to piston. R&R Con Rods are used in...
+

valve094-B22
£16.95 (£20.34 inc VAT)
OEM: E4603, 70-4603
Triumph 650cc/750cc Inlet Valve - 70-4603 Triumph T120 Bonneville (1963-72) TR6 from Eng. No. (1966-72) Inlet Valve (Alpha valve no.V245) Also for T140...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.