.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

fkgk826
£42.95 (£51.54 inc VAT)
OEM: E3730, 70-3730, E4919, 70-4919, E7563, 70-7563, E1670, 70-1670, E-3751, 70-3751, E9348, 70-9348, E6309, 70-6309, E4547, 70-4547, E7310, 70-7310, E5049, 70-5049, T1770, 57-1770, E3832, 70-3832
Triumph - 650cc Trophy TR6, Bonneville, T120 Engine Gasket Set 1969-70 9 stud head. Set contains the following gaskets: Rocker Box x2, Cylinder Head,...
+

clutch468-B20
£52.95 (£63.54 inc VAT)
OEM: 57-1570
Triumph Clutch Chainwheel - 5TA, T100, T110, 6T, T120, TR6 From 1960-74 Number of Teeth: 58T Chain Type: Duplex OEM: 57-1570, T1570
+

tapp9353-B13
£29.95 £19.95 (£23.94 inc VAT)
OEM: 70-9353
Triumph 500cc, 650cc, 750cc, T100, T120, T140 exhaust tappet guide block. OEM: 70-9353
+

bear347-F4
£31.95 (£38.34 inc VAT)
OEM: 70-1591, E1591, 67-1240
BSA/Triumph Crankshaft Main Bearing BSA A75 Rocket 3 D/S Triumph T120 Crankshaft T/S (Imperial), T150/T160 Trident Crankshaft D/S (1969-75). BSA A50, A65...

nut0702-B14
£1.45 (£1.74 inc VAT)
OEM: 14-0702
Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...
+

sumpgkt0111
£1.45 (£1.74 inc VAT)
OEM: 40-0111, 40-111
BSA Sump Plate Gasket - C15 and B40 Models Circa 1959-65 Usually two gaskets required, one each side of the gauze filter. Made in England OEM:...
+

tab-0685-B18
£0.95 (£1.14 inc VAT)
OEM: 67-0685, 67-685
BSA Camshaft Pinion Tab Washer - A7, A10, A50 and A65 Models Camshaft pinion lockwasher - correct fitment on A7 and A10 models circa 1947-62. Also used...
+

pist-16945
£39.95 (£47.94 inc VAT)
OEM: 40-0970, 70-7998, E7998, 16945
Hepolite Piston - BSA/Triumph Unit Singles - B25, C25, TR25 Models Circa 1967-71 Suitable for 250cc singles with the square alloy barrel - B25, C25 and...

clplt1315-B24
£7.45 (£8.94 inc VAT)
OEM: 57-1315, T1315
Triumph T20 Tiger Cub Clutch Driven/Steel Plate - All Models From 1954 Onwards Plain steel driven plate as used on all T15 Terrier and T20 Tiger Cub...
+

fkgk320C
£44.95 (£53.94 inc VAT)
BSA Motorcycle - 650cc A10 Golden Flash (Copper Head Gasket) Engine Gasket Set 1950-63
+

fkgk812
£34.95 (£41.94 inc VAT)
Triumph Motorcycle - 650cc T110, TR6 S/S Engine Gasket Set 1956-62
+

sprock425-B10
£27.95 (£33.54 inc VAT)
OEM: 57-1918
Triumph TR6, T120 etc 1963-74, T150 1969-72 4 speed Gearbox Sprocket 19T Chain Pitch: 5/8" x 3/8" (530) Number of Teeth: 1 OEM: 57-1918, T1918
+

clutch4435-B23
£119.95 (£143.94 inc VAT)
OEM: 57-4435, T4435
Triumph / BSA Complete Clutch Centre / Shock Absorber Assembly - Unit Twins - Three Spring Clutch Correct fitment on later T120, all T140 and TR7 models....
+

bear836-F4
£15.95 (£19.14 inc VAT)
OEM: 60-4167, 01-7822, 70-3835
Triumph 3TA, T21, T90 350cc Unit twins Crankshaft D/S Triumph 5TA, T100, TR5 500cc Unit twins Crankshaft D/S (ball race up to 1967) Triumph T120, TR6, 6T...
+

tapp470-B18
£1.25 (£1.50 inc VAT)
OEM: 70-0470
Hexagonal Tappet Nut- Triumph T120/T140 and BSA A7/A10 OEM: 70-0470 CEI thread Made in England
+

seal255
£2.45 (£2.94 inc VAT)
OEM: T1478, 57-1478
Gearbox Final Drive OIL SEAL - Triumph - 57-1478 Gearbox High gear Oil seal for Triumph 3TA/5TA/T90/T100 350/500cc (1957-72), T100/TR5T 500cc (1972-74)...
+

gask2226
£0.95
OEM: 70-2226, E2226
Dynamo Gasket - Cork - 70-2226 Cork gasket between dynamo and timing gear case OEM: 70-2226, E2226
+

seal2640
£1.00 (£1.20 inc VAT)
OEM: 60-2640, D2640
O RING - Triumph Gear Shaft - 60-2640 Fits in the primary chain case, for the gearshaft hole. OEM: 60-2640, D2640
+

gearbox3660-B13
£8.95 (£10.74 inc VAT)
OEM: 57-3660, T3660, T44, 68-0098, 68-98, 57-0260 57-4308
Triumph/BSA 4 Speed Gearbox Camplate Index Plunger - Pre-Unit & Unit Models Correct fitment for BSA A50 & A65 models + 650/750cc Triumph Unit...
+

nut0398-B18
£6.95 (£8.34 inc VAT)
OEM: 70-0398, E398
Triumph Crankshaft Timing Pinion Nut - 500/650cc Pre-Unit Models 3/4" x 20 TPI - Stainless steel OEM: 70-0398, E398
+

stud2962-B13
£1.95 (£2.34 inc VAT)
OEM: 70-2962, E2962
Triumph - Inlet Manifold To Carburettor Stud - 500/650cc Twins from 1952-69 Length: 1+1/4" (32mm) Diameter: 5/16" (7.7mm) BSW/CEI threads OEM:...
+

gear3171-B8
£39.95 (£47.94 inc VAT)
OEM: 67-3171, 42-3010, 65-3417, 65-3380
BSA Gear Lever - Long Type - A, B, C and M Group Models Circa 1938-54 Dog-legged gear change lever - as fitted to many models rigid, plunger and swinging...
+

wash8896
£0.45 (£0.54 inc VAT)
OEM: 70-8896, E8896
Triumph/BSA Timing/Tacho Drive Plug Alloy Washer - Unit Singles and Twins From 1968 Onwards Crankcase timing aperture plug and/or tacho drive plug alloy...
+

wash2288
£0.35 (£0.42 inc VAT)
OEM: 70-2288, E2288
Triumph 3/8" Serrated Lock Washer - T140 Brake Hose / Flywheel + Various Uses Shakeproof serrated lock washer as used on many pre unit and unit Triumph...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.