.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine & Transmission

gkch1313
£3.95 (£4.74 inc VAT)
OEM: 57-0504, T504
Triumph Pre-Unit Primary Chaincase Gasket - Long Dynamo Type - Rigid Frame - 1939-53 Fits 500/650cc pre-unit rigid frame dynamo or mag/dyno models from...
+

seal6299
£0.65 (£0.78 inc VAT)
OEM: 70-6299, E6299, 40-0418, 57-3620, 70-7431, E7431
Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards O ring seal for the adjuster plug as used on all unit twins from...
+

clutch6283-B18
£12.95 (£15.54 inc VAT)
OEM: 70-6283, E6283
Triumph Primary Chain Tensioner Blade - 350/500cc Unit Twins Circa 1961-74 Primary chain tensioner blade suitable for 3TA, T90, 5TA and T100 models. For...
+

gearbox0405-B18
£1.45 (£1.74 inc VAT)
OEM: 57-0405, T405
Triumph Gearchange Quadrant Plunger Spring - Pre Unit Models + Unit 650/750cc Twins and Triples Gearbox plunger spring as used on four or five speed...
+

clip238H-B18
£1.45 (£1.74 inc VAT)
OEM: 70-4671, E4671
Triumph Unit models Rocker cover inspection Cap Spring Retaining Clip OEM: 70-4671, E4671
+

gkt999
£2.45 (£2.94 inc VAT)
OEM: 67-3346
BSA A10, A7 etc - Inner Gearbox Gasket OEM: 67-3346
+

shim0066-B18
£6.95 (£8.34 inc VAT)
OEM: 40-0065, 40-0066, 40-0069, 40-66, 40-69
BSA Crankshaft Shim Set - Unit Singles - C15, B25, B40, B44, B50 Also used to shim between the alternator and crankshaft on A50 and A65 models. Set of 5...
+

seal1497
£1.25 (£1.50 inc VAT)
OEM: 70-1497, 70-3547, E1497, E3547
Triumph Push Rod Tube Top Seal - Fibre Type - 350/500/650cc Pre Unit and Early Unit Twins Fibre upper push rod joint washer as used on various models...
+

pump-mor-13
£89.95 (£107.94 inc VAT)
OEM: 70-3072, E3072, GS326
Triumph Plunger Type Oil Pump - Pre Unit Models Circa 1949-62 - Made in England by Morgo A high performance dual plunger oil pump for pre unit 3T, 5T,...
+

kick352
£1.75 (£2.10 inc VAT)
OEM: 57-1956
Oil Seal for the Kick Start Shaft - Fits Triumph 650cc and 750cc Models Triumph T120/TR6 - 1963-1974 T150/T160 - 1968 onwards OEM: 57-1956
+

push4746
£1.05 (£1.26 inc VAT)
OEM: 70-4746
Triumph Push Rod Steel Washer Steel cup, T90, T100, T120, T140, T150 OEM:  70-4746
+

domenut1531-B13
£2.95 (£3.54 inc VAT)
OEM: 97-1531, H1531
Triumph Primary and Gearbox Cover Dome Nut - Unit 650cc Models Circa 1963-68 Chrome plated acorn nut used to secure both the primary chaincase cover and...
+

pillarbolt7680-B13
£1.95 (£2.34 inc VAT)
OEM: 70-7680, E7680
Triumph/BSA Contact Breaker Pillar Bolt - Various Models To secure the contact points set on side points models, also secures the points cover. Correct...
+

wash0644-B18
£1.25 (£1.50 inc VAT)
OEM: 67-0644, 67-644
BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards Half time pinion lockwasher as used on all A50 and A65 models from...
+

seal359-B7
£7.95 (£9.54 inc VAT)
OEM: 70-4568, 70-3379, 97-1168, E4568, E3379, H1168
Oil Seal Set - Engine and Gearbox - Triumph T20 Tiger Cub Models - 1963 Onwards Suitable for T20 Tiger Cub models circa 1963-1967. Kit contains: side...
+

fkgk828
£42.95 (£51.54 inc VAT)
OEM: E3730, 70-3730, E4675, 70-4675, E7563, 70-7563, E6772, 70-6772, E8771, 70-8771, E3751, 70-3751, E7310, 70-7310, E3798, 70-3798, E9511, 70-9511, E4156, 70-4156, E3832, 70-3832
Triumph Motorcycle - 500cc T100T S/S, T100S, Tiger 100 Engine Gasket Set 1970-73 Set contains the following gaskets: Rocker Cover x2, Cylinder Head,...
+

gearbox0373-B18
£1.95 (£2.34 inc VAT)
OEM: 57-0373, T373
Triumph Gear Change Selector Index Plunger Spring - 350/500/650cc Length (uncompressed) 2+1/2" (63.5mm) OD: 5/16" (8.2mm) OEM: 57-0373, T373
+

shim0671-B18
£6.95 (£8.34 inc VAT)
OEM: 67-0671, 67-671, 67-672, 67-677, 67-0672, 67-0677
BSA Crankshaft Shim Set - A10, A7 ID: 1+1/4" (31.5mm) OD: 1+11/16" (42.2mm) 2x 0.001" 2x 0.005" 1x 0.010" Made in England OEM: 67-0671, 67-671, 67-672,...
+

clutch3910-B18
£12.95 (£15.54 inc VAT)
OEM: 65-3910
BSA Clutch Inner Bearing Race Balls & Cages - All Models Fitted with a 6 Spring Clutch Clutch bearing set of inner bearing race with ball bearings...
+

fkgk3743
£2.85 (£3.42 inc VAT)
OEM: 70-3743, E3743
Triumph Rocker Box Gasket - 350/500cc Unit Models Circa 1958-68 Original type rocker box gasket without the pushrod holes, as used on earlier 3TA, T90,...
+

bush0023-B4
£8.95 (£10.74 inc VAT)
OEM: 57-0023, T23
Triumph Kickstart Spindle Outer Bush - 350/500/650cc Pre Unit + 650/750cc Unit Models Gearbox outer cover bush that supports the kickstart shaft. Correct...
+

clutch0861-B23
£0.65 (£0.78 inc VAT)
OEM: 68-0861, 68-861
BSA Primary Chain Tensioner Screw Oil Seal Washer - A50 and A65 Models Circa 1965-72 Oil seal washer with rubber insert, locates over the adjuster screw -...
+

gk2894
£1.95 (£2.34 inc VAT)
OEM: 70-2894, E2894
Triumph Cylinder Base Gasket - 500/650cc Pre Unit + 650cc Unit Models Circa 1950-65 Cylinder base washer -  correct fitment on pre unit T110, 6T, T120...
+

520-reg-spring
£4.45 (£5.34 inc VAT)
520 Regina Classic Motorcycle Chain Connecting Spring Link Split/master link for use with standard roller 520 motorcycle chain. Premium quality - Made...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.