.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

fkpipe035
£0.95 (£1.14 inc VAT)
Breather / Overflow Hose - 3.5mm Bore, 6mm Diameter - Black Rubber Carburettor overflow or breather pipe - s uitable for low pressure uses only. OD: 6mm...
+

seal6299
£0.65 (£0.78 inc VAT)
OEM: 70-6299, E6299, 40-0418, 57-3620, 70-7431, E7431
Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards O ring seal for the adjuster plug as used on all unit twins from...
+

spring3724-B13
£1.75 (£2.10 inc VAT)
OEM: 70-3724, E3724
Triumph Oil Sump Filter Retaining Spring - 350/500cc Models OD: 7/16" (10.6mm) Length uncompressed: 7/16" (10.8mm) OEM: 70-3724, E3724
+

plug3668-B13
£5.95 (£7.14 inc VAT)
OEM: 57-3668, 57-2167, T2167, T3668, 57-3851, T3851
Triumph Gearbox Oil Drain and Level Plug Assembly - Unit 650/750cc Models - 1968 Onwards Correct fitment on T120, TR6 and T140, TR7 unit twins from 1968...
+

rollers192-B18
£2.99 (£3.59 inc VAT)
1/4" x 1/4" Big End Rollers Sold in packs of 10 rollers
+

bolt0543-B18
£0.95 (£1.14 inc VAT)
OEM: 21-0543, S543
Triumph Gearbox Oil Level Drain Plug Bolt - 650/750cc - 1970 Onwards Triumph later T120, TR6 and T140, TR7 Unit Twins from 1970 onwards + Trident models...
+

off-esprk418
£25.95 (£31.14 inc VAT)
OEM: 40-0582, 40-582
BSA C15/B40 - Duplex Engine Primary Drive Sprocket - 18T Crankshaft sprocket for BSA C15, C25, B25 and B40 trials/competition models. You will need to...
+

bolt113-B19
£3.95 (£4.74 inc VAT)
OEM: 70-4456
Triumph T90/T100 Cylinder head bolt (outer with extended hexagon). High Tensile 3/8" x 2-3/4" 26TPI bolts. OEM: 70-4456
+

bear025-F4
£9.95 (£11.94 inc VAT)
Ball Bearing RLS5 - 4203-2RS Range of uses including wheel bearing, transmission and engine bearing. OD: 40mm ID: 17mm Width: 16mm
+

dowel1532-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1532, E1532
Triumph Oil Junction Block / Tappet Oil Feed Dowel - Pre Unit Twins - 1939-62 + Unit 650/750cc Models Oil junction block to crankcase hollow dowel -...
+

wash8896
£0.45 (£0.54 inc VAT)
OEM: 70-8896, E8896
Triumph/BSA Timing/Tacho Drive Plug Alloy Washer - Unit Singles and Twins From 1968 Onwards Crankcase timing aperture plug and/or tacho drive plug alloy...
+

bear415-F4
£46.95 (£56.34 inc VAT)
OEM: E9493, 70-9493, 01-7824, 017824
Crankshaft Roller Bearing Drive side for Triumph 5TA/T100/TR5 500cc Unit twins (roller race 1968-) Norton Dominator/Model 7, 500,600,650cc models. OEM:...
+

nut0702-B14
£1.45 (£1.74 inc VAT)
OEM: 14-0702
Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...
+

wash1612
£0.15 (£0.18 inc VAT)
OEM: 70-1612, E1612, 70-2312, E2312
Triumph 1/4" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit Models Shakeproof serrated washer as used to secure bolts - engine,...
+

wash1738
£0.45 (£0.54 inc VAT)
OEM: 57-1738, T1738, 02-0100, GS761
Triumph Primary Adjuster Drain Plug Fibre Washer - 350/500/650cc Models Circa 1961-74 Drain and adjuster plug fibre washer - correct fitment on 3TA, 5TA,...
+

shim0066-B18
£6.95 (£8.34 inc VAT)
OEM: 40-0065, 40-0066, 40-0069, 40-66, 40-69
BSA Crankshaft Shim Set - Unit Singles - C15, B25, B40, B44, B50 Also used to shim between the alternator and crankshaft on A50 and A65 models. Set of 5...
+

wash2521-B13
£1.25 (£1.50 inc VAT)
OEM: 65-2521
BSA Engine Mainshaft Lock Washer - B31, A10, A7 ID for shaft size 7/8" OD: 1+9/16" Made in England OEM: 65-2521
+

seal7565
£1.95 (£2.34 inc VAT)
OEM: 70-7565, E7565
Triumph Clutch Back Plate Oil Seal - 500/650cc Unit Models from 1968 Onwards Gearbox sprocket cover plate oil seal. Correct fitment for T120 and TR6...
+

seal087
£1.25 (£1.50 inc VAT)
OEM: 71-1070
O RING - BSA and Triumph BSA, Triumph Rocket 3, Trident (cap seal) OEM: 71-1070
+

bolt763-B19
£1.95 (£2.34 inc VAT)
OEM: 21-1875
Triumph High tensile bolt 1/4 x 1/4 UNC. Rockerbox corner bolt (1969-) OEM: 21-1875
+

stud2109-B19
£1.95 (£2.34 inc VAT)
OEM: 21-2109, S2109
Triumph /BSA Sump Plate Stud - OIF Models from 1971 Sump plate to frame stud 5/16" x 24TPI x 1" UNF OEM: 21-2109, S2109
+

nut219-B18
£6.95 (£8.34 inc VAT)
OEM: 42-0071
BSA Engine Sprocket Drive Nut - 42-0071 Sprocket Cush Drive Nut BSA B31, B33, A7, A10 Crankshaft cush drive nut for Swinging Arm models OEM: 42-0071
+

stud3114-B19
£2.95 (£3.54 inc VAT)
OEM: 70-3114, E3114
Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73 Drive side crankshaft to alternator rotor stud - later pre unit...
+

washer4262
£0.45 (£0.54 inc VAT)
OEM: 60-4262, PT104B, D4262
Triumph/AMC Fibre Sealing Washer - 60-4262 Used in various places on Triumph, AJS and Matchless bikes, including the oil tank washer. OEM: 60-4262,...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.