Engine & Transmission :: Engine Lower

CODE: screwkit-81-B9

Engine and Gearbox Cover Screw Set - Triumph 350/500cc Twins 1957-68

£26.95 (£32.34 inc VAT)

OEM: 70-3800, E3800, 70-3801, E3801, 70-3802, E3802, 70-3804, E3804, 70-3668, E3668, 57-1401, 57-1402, 57-1944

Engine and Gearbox Cover Screw Set - Triumph 350/500cc Twins 1957-68 Screw set to secure the primary, gearbox and timing cover on unit 3TA, 5TA and T100...

Quantity:

+ −

CODE: bolt-set9948-B14

Triumph Cylinder Head Complete Bolt Set - 650cc Unit Twins to 1970

£59.95 (£71.94 inc VAT)

OEM: 70-1596, E1596, 70-4771, E4771, 70-0327, E327, 70-2982, E2982, 21-1875, S1875, 57-1553, T1553

Triumph Cylinder Head Complete Bolt Set - 650cc Unit Twins to 1970 Complete set of bolts and washers as follows: 1x 70-4771 Centre head bolt - 5/16" x...

Quantity:

+ −

CODE: bolt-set0078-B14

Triumph Pre-Unit Engine Mounting Stud / Bolt Set - 500/650cc Models from 1954-59

£56.95 (£68.34 inc VAT)

OEM: 00-0078

Triumph Pre-Unit Engine Mounting Stud / Bolt Set - 500/650cc Models from 1954-59 To mount the engine and gearbox in pre-unit models with a single...

Quantity:

+ −

CODE: filt5230-B3

Triumph Crankcase Oil Sump Filter Early Unit 650cc Models - 1963 Only

£12.95 (£15.54 inc VAT)

OEM: 70-5230, 70-4543, D5230, E4543

Triumph Crankcase Oil Sump Filter Early Unit 650cc Models - 1963 Only Crankcase oil filter gauze assembly suitable for early 6T, T120 and TR6 models....

Quantity:

+ −

CODE: fkscrew211-B9

Stainless Steel Allen Screw Kit - BSA B50 Models

£13.95 (£16.74 inc VAT)

OEM: 14-6606, 14-6608, 14-6610, 14-6611, 14-6612, 14-6614, 40-0236

Stainless Steel Allen Screw Kit - BSA B50 Models Complete set, includes two allen keys and all required UNC stainless steel hex screws. OEM: 14-6606,...

Quantity:

+ −

CODE: stud1536-B13

Triumph Crankcase to Oil Pump Stud - Pre Unit 350/500/650cc Twins From 1939-62

£2.25 (£2.70 inc VAT)

OEM: 70-1536, E1536

Triumph Crankcase to Oil Pump Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil pump body to crankcase fixing stud - Correct fitment on pre-unit twins...

Quantity:

+ −

CODE: nut0643-B18

BSA Crankshaft Timing Side Pinion Drive Nut - A50, A65, A7, A10 Models - LH Thread

£4.95 (£5.94 inc VAT)

OEM: 67-0643, 67-643

BSA Crankshaft Timing Side Pinion Drive Nut - A50, A65, A7, A10 Models - LH Thread Half time pinion gear locknut as used on all BSA A50/A65 models from...

Quantity:

+ −

CODE: nut1463-B13

Triumph Inlet Camshaft Oil Pump Drive Nut - Pre Unit 500/650cc Twins - Circa 1946-61

£8.95 (£10.74 inc VAT)

OEM: 70-1463, E1463

Triumph Inlet Camshaft Oil Pump Drive Nut - Pre Unit 500/650cc Twins - Circa 1946-61 Correct fitment for earlier pre-unit twins - 3TA, 5T, T100, 6T,...

Quantity:

+ −

CODE: nut3955-B14

3/8" CEI Self-Locking Nyloc Nut

£0.65 (£0.78 inc VAT)

OEM: 82-3955, F3955

3/8" CEI Self-Locking Nyloc Nut 3/8" CEI self-locking nyloc nut. deep type - 26TPI OEM: 82-3955, F3955

Quantity:

+ −

CODE: camshaft3275-B7

Triumph Inlet / Exhaust Camshaft - Pre Unit 500/650cc Models - Cast Iron Head

£68.95 (£82.74 inc VAT)

OEM: 70-3275, E3275

Triumph Inlet / Exhaust Camshaft - Pre Unit 500/650cc Models - Cast Iron Head Correct fitment on 5T, TR5, T100 and 6T models circa 1953-62. Nitrided...

Quantity:

+ −

CODE: nut0702-B14

Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards

£1.45 (£1.74 inc VAT)

OEM: 14-0702

Triumph Alternator / Carb Manifold Mounting Nut - Unit Twins - 1969 Onwards For mounting the alternator stator on the primary chaincase on 500/650/750cc...

Quantity:

+ −

CODE: wash3887

Triumph Oil Pump Mounting Serrated Washer - Conical Type - 350/500/650/750cc Unit Twins

£0.45 (£0.54 inc VAT)

OEM: 70-3887, E3887

Triumph Oil Pump Mounting Serrated Washer - Conical Type - 350/500/650/750cc Unit Twins Correct for all unit twins - 3TA, 5TA, T90, T100, 6T, TR6, T120,...

Quantity:

+ −

CODE: plug0615-B18

BSA Small Journal Crankshaft Sludge Trap Plug - A7 and A10 Models Circa 1947-62

£6.45 (£7.74 inc VAT)

OEM: 65-0615, 65-615

BSA Small Journal Crankshaft Sludge Trap Plug - A7 and A10 Models Circa 1947-62 To fit small journal crankshafts as used on A7 models from 1947-62 and A10...

Quantity:

+ −

CODE: nut3120-B14

Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59

£5.45 (£6.54 inc VAT)

OEM: 70-3120, E3120

Triumph Crankshaft Drive Side Nut - Pre Unit 500/650cc Dynamo Models - Circa 1953-59 Engine sprocket nut as used on pre-unit T100, TR5, T110, TR6 and...

Quantity:

+ −

CODE: bolt9330-B13

Triumph Oilway Plug Bolt - 650/750cc Unit Twins From 1968 Onwards

£0.95 (£1.14 inc VAT)

OEM: 70-9330, E9330

Triumph Oilway Plug Bolt - 650/750cc Unit Twins From 1968 Onwards Crankcase timing side oil way plug as fitted to T120, TR6 models from 1968 onwards + all...

Quantity:

+ −

CODE: plug3668-B13

Triumph Gearbox Oil Drain and Level Plug Assembly - Unit 650/750cc Models - 1968 Onwards

£5.95 (£7.14 inc VAT)

OEM: 57-3668, 57-2167, T2167, T3668, 57-3851, T3851

Triumph Gearbox Oil Drain and Level Plug Assembly - Unit 650/750cc Models - 1968 Onwards Correct fitment on T120, TR6 and T140, TR7 unit twins from 1968...

Quantity:

+ −

CODE: nut6523-B13

Triumph Exhaust Camshaft Nut LH Thread - Unit 500/650/750cc Models - Circa 1970-87

£4.95 (£5.94 inc VAT)

OEM: 70-6523, E6523

Triumph Exhaust Camshaft Nut LH Thread - Unit 500/650/750cc Models - Circa 1970-87 Exhaust camshaft retaining nut on all 650/750cc twins from 1970 onwards...

Quantity:

+ −

CODE: studs601-B14

Triumph Cylinder Base Stud Set - 650cc Models - Circa 1968-72

£10.95 (£13.14 inc VAT)

OEM: 21-1865, S1865

Triumph Cylinder Base Stud Set - 650cc Models - Circa 1968-72 Correct fitment on Triumph T120 and TR6 models. Set includes 8 cylinder base studs - 12...

Quantity:

+ −

CODE: studs602-B18

Triumph Cylinder Base Stud Set - 750cc Models - Circa 1973-82

£10.95 (£13.14 inc VAT)

OEM: 21-1865, S1865, 71-3013, E13013

Triumph Cylinder Base Stud Set - 750cc Models - Circa 1973-82 Correct fitment on Triumph T140 and TR7 models. Set includes 8 cylinder base studs - 4x...

Quantity:

+ −

CODE: plug4922-B13

Triumph Primary Chain Oil Drain and Adjuster Plug - Long Type - 650cc Twins from 1962-65

£3.25 (£3.90 inc VAT)

OEM: 70-4922, E4922

Triumph Primary Chain Oil Drain and Adjuster Plug - Long Type - 650cc Twins from 1962-65 Long type with BSF thread - used on 6T, T120 and TR6 models...

Quantity:

+ −

CODE: off-esprk449

Triumph T20 Tiger Cub - Duplex Engine Primary Drive Sprocket - 16T

£29.95 (£35.94 inc VAT)

OEM: 70-3912, E3912

Triumph T20 Tiger Cub - Duplex Engine Primary Drive Sprocket - 16T Crankshaft sprocket for Triumph Tiger Cub trials/competition models. Will require the...

Quantity:

+ −

CODE: enginestud-4536-B13

Triumph Long Alternator Mounting Stator Stud - 650cc Models Circa 1963-68

£8.45 (£10.14 inc VAT)

OEM: 70-4536, E4536

Triumph Long Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Front stator stud, correct fitment on unit 6T, T120 and TR6 models circa...

Quantity:

+ −

CODE: enginestud-4537-B13

Triumph Short Alternator Mounting Stator Stud - 650cc Models Circa 1963-68

£8.95 (£10.74 inc VAT)

OEM: 70-4537, E4537

Triumph Short Alternator Mounting Stator Stud - 650cc Models Circa 1963-68 Rear stator stud, correct fitment on unit 6T, T120 and TR6 models circa...

Quantity:

+ −

CODE: pump-gkt-preunit-03

Triumph Pre-Unit Oil Pump Gasket 70-1537

£1.00 (£1.20 inc VAT)

OEM: E1537, 70-1537

Triumph Pre-Unit Oil Pump Gasket 70-1537 500cc, 650cc etc OEM E1537, 70-1537

Quantity:

+ −

CODE: nut3971-B13

Alternator Rotor Nut - Triumph T20 Tiger Cub Models From 1959 Onwards

£7.95 (£9.54 inc VAT)

OEM: 70-3971, E3971

Alternator Rotor Nut - Triumph T20 Tiger Cub Models From 1959 Onwards To secure the alternator rotor on the shaft. Length UH: 3/4" (19mm) OD: 9/16"...

Quantity:

+ −

CODE: esprk3542-B9

Triumph 750cc Twin - Triplex Engine Primary Drive Sprocket - 29T

£39.95 (£47.94 inc VAT)

OEM: 71-3542

Triumph 750cc Twin - Triplex Engine Primary Drive Sprocket - 29T Crankshaft motor sprocket for T140, TR7, TSS and TSX models circa 1973-83. See related...

Quantity:

+ −

CODE: bear0015-B8

BSA Crankshaft Timing Side Bearing/Bush - A50 and A65 Models Circa 1962-65

£67.95 (£81.54 inc VAT)

OEM: 68-0015, 68-15

BSA Crankshaft Timing Side Bearing/Bush - A50 and A65 Models Circa 1962-65 Thicker flange early type - available as standard, -.010, -.020, -.030, -.040,...

Select Options

CODE: plug1212-B18

BSA Large Journal Crankshaft Sludge Trap Plug With Extension - A10 + Early A50 and A65 Models

£11.95 (£14.34 inc VAT)

OEM: 67-1212

BSA Large Journal Crankshaft Sludge Trap Plug With Extension - A10 + Early A50 and A65 Models To fit large journal crankshafts as used on pre-unit A10...

Quantity:

+ −

70-6299, E6299, 40-0418, 57-3620 - Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards

CODE: seal6299

Triumph Primary Chain Adjuster Plug Viton O Ring - Unit Twins From 1969 Onwards

£0.65 (£0.78 inc VAT)

OEM: 70-6299, E6299, 40-0418, 57-3620, 70-7431, E7431

Triumph Primary Chain Oil Drain and Adjuster Plug O Ring - 650/750cc - 1969 Onwards O ring seal for the adjuster plug as used on all unit twins from...

Quantity:

+ −

CODE: stud3523-B14

Triumph Grooved Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models

£2.45 (£2.94 inc VAT)

OEM: 70-3523, E3523

Triumph Grooved Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...

Quantity:

+ −

70-0672, E672 - Triumph Plain Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models

CODE: stud0672-B19

Triumph Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models

£2.45 (£2.94 inc VAT)

OEM: 70-0672, E672

Triumph Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...

Quantity:

+ −

CODE: plate4016G-B13

Triumph Patent Plate - TRW Side Valve Models

£8.95 (£10.74 inc VAT)

OEM: 70-4016G, E4016G

Triumph Patent Plate - TRW Side Valve Models Brass timing cover triangular name plate for 500cc side valve twins. Supplied with 3 brass hammer drive...

Quantity:

+ −

CODE: pmp222

BSA Oil Pump Assembly With Tacho Drive Extension - A7 and A10 Models Circa 1949-63

£299.95 (£359.94 inc VAT)

OEM: 42-0115, 42-115, 67-1402, 67-1381

BSA Oil Pump Assembly With Tacho Drive Extension - A7 and A10 Models Circa 1949-63 Complete oil pump suitable for A7 and A10 plunger and swinging arm...

Quantity:

+ −

CODE: bolt3767-B13

Triumph Gearbox Adjuster Pivot Pin - Pre Unit 500/650cc Models Circa 1956-59

£5.95 (£7.14 inc VAT)

OEM: 82-3767, F3767

Triumph Gearbox Adjuster Pivot Pin - Pre Unit 500/650cc Models Circa 1956-59 Abutment pin to fit T100, 6T, T110, T120, TR6 models circa 1956-59. Made in...

Quantity:

+ −

CODE: stud3769-B14

Triumph Gearbox Top Mounting Stud - Pre Unit 500/650cc Models Circa 1956-62

£2.95 (£3.54 inc VAT)

OEM: 82-3769, F3769

Triumph Gearbox Top Mounting Stud - Pre Unit 500/650cc Models Circa 1956-62 Threaded mounting stud, correct fitment on T100, 6T, T110, T120, TR6 models....

Quantity:

+ −

82-3575, F3575 - Triumph Gearbox Pivot Bolt - Pre Unit 500/650cc Models Circa 1956-59

CODE: bolt3575-B14

Triumph Gearbox Pivot Bolt - Pre Unit 500/650cc Models Circa 1954-59

£11.95 (£14.34 inc VAT)

OEM: 82-3575, F3575

Triumph Gearbox Pivot Bolt - Pre Unit 500/650cc Models Circa 1954-59 Threaded mounting stud, correct fitment on T100, 6T, T110, T120, TR6 models. Length...

Quantity:

+ −

DS47, DS-47 - 7/16" x 26 CEI Half Nut - Various Uses on Pre Unit Triumph Models

CODE: nut-DS47-B14

7/16" x 26 CEI Half Nut - Various Uses on Pre Unit and Unit Triumph Models

£1.75 (£2.10 inc VAT)

OEM: DS47, DS-47

7/16" x 26 CEI Half Nut - Various Uses on Pre Unit Triumph Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...

Quantity:

+ −

CODE: pumpgkt2296

BSA Oil Pump Gasket - A50 and A65 Models Circa 1963-73

£1.95 (£2.34 inc VAT)

OEM: 71-2296, 68-0939, 68-939, 68-0293, 86-293

BSA Oil Pump Gasket - A50 and A65 Models Circa 1963-73 Correct fitment on 500/650cc unit twins. Made in England OEM: 71-2296, 68-0939, 68-939, 68-0293,...

Quantity:

+ −

CODE: wash1612

Triumph 1/4" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit Models

£0.15 (£0.18 inc VAT)

OEM: 70-1612, E1612, 70-2312, E2312

Triumph 1/4" Serrated Lock Washer - Flat Type - Various Uses on Pre Unit and Unit Models Shakeproof serrated washer as used to secure bolts - engine,...

Quantity:

+ −

82-3108, F3108 - Triumph Rear Engine Plate to Frame Bolt - Pre Unit 500/650cc Models Circa 1956-59

CODE: bolt3108-B19

Triumph Rear Engine Plate to Frame Bolt - Pre Unit 500/650cc Models Circa 1951-59

£6.95 (£8.34 inc VAT)

OEM: 82-3108, F3108

Triumph Rear Engine Plate to Frame Bolt - Pre Unit 500/650cc Models Circa 1951-59 Frame to lower gearbox bolt, correct fitment on T100, 6T, T110, T120,...

Quantity:

+ −

82-1680, F1680 - Triumph Lower Frame to Engine Plate Stud - Pre Unit 500/650cc Models Circa 1956-59

CODE: stud1680-B19

Triumph Lower Frame to Engine Plate Stud - Pre Unit 500/650cc Models Circa 1946-59

£3.45 (£4.14 inc VAT)

OEM: 82-1680, F1680

Triumph Lower Frame to Engine Plate Stud - Pre Unit 500/650cc Models Circa 1946-59 Bottom frame to engine mounting stud, correct fitment on T100, 6T,...

Quantity:

+ −

CODE: pumpgkt1393

BSA Oil Pump Gasket - A7 and A10 Models Circa 1949-63

£1.45 (£1.74 inc VAT)

OEM: 67-1393

BSA Oil Pump Gasket - A7 and A10 Models Circa 1949-63 Correct fitment on 500/650cc pre unit twins. Made in England OEM: 67-1393

Quantity:

+ −

CODE: stud6276-B14

BSA Lower Front Engine Mounting Stud - A Group Swinging Arm Models Circa 1954-62

£3.45 (£4.14 inc VAT)

OEM: 27-6276

BSA Lower Front Engine Mounting Stud - A Group Swinging Arm Models Circa 1954-62 Engine plate to frame lower tie stud, correct fitment on A7 and A10...

Quantity:

+ −

CODE: nut1292-B14

BSA Top Front Engine Stud Sleeve Nut - A Group Rigid, Plunger and Swinging Arm Models Circa 1947-62

£3.45 (£4.14 inc VAT)

OEM: 67-1292

BSA Top Front Engine Stud Sleeve Nut - A Group Rigid, Plunger and Swinging Arm Models Circa 1947-62 Engine plate tie extended nut, correct fitment on all...

Quantity:

+ −

CODE: bolts4470-B14

BSA Engine Mounting Bolts x3 - A Group Rigid, Plunger and Swinging Arm Models Circa 1950-62

£8.45 (£10.14 inc VAT)

OEM: 42-4470, 67-0350, 67-350

BSA Engine Mounting Bolts x3 - A Group Rigid, Plunger and Swinging Arm Models Circa 1950-62 Set of three engine plate tie bolts, suitable to replace the...

Quantity:

+ −

CODE: nut-DS48-B14

1/2" x 20 CEI Standard Nut - Various Uses on BSA, Triumph and AMC Models

£1.95 (£2.34 inc VAT)

OEM: DS48, DS-48, 02-0052, 99-3557, 15-5753

1/2" x 20 CEI Standard Nut - Various Uses on BSA, Triumph and AMC Models Used extensively on many frame, bolts and stud fixing points. Gearbox mounting,...

Quantity:

+ −

CODE: nut0124-B14

1/2" x 20 CEI Thin Nut - BSA Camshaft Pinion Nut + Hub Spindle Lock Nut - Various Uses

£3.45 (£4.14 inc VAT)

OEM: 02-0124, 2-124, 27-6716

1/2" x 20 CEI Thin Nut - BSA Camshaft Pinion Nut + Hub Spindle Lock Nut - Various Uses Used to secure the camshaft gear on A7 and A10 models + some early...

Quantity:

+ −

CODE: camshaft0356-B7

BSA Camshaft - A7 ST/SS and A10 Gold Flash/RR/SR Models Circa 1952-60 - 356 Profile

£144.95 (£173.94 inc VAT)

OEM: 67-0356, 67-356

BSA Camshaft - A7 ST/SS and A10 Gold Flash/RR/SR Models Circa 1952-60 - 356 Profile Hepolite billet camshaft suitable for both plunger and swinging arm...

Quantity:

+ −

CODE: camshaft0357-B7

BSA Camshaft - A10 Super Rocket, RGS and Spitfire - Circa 1958-63 - 357 Profile

£144.95 (£173.94 inc VAT)

OEM: 67-0357, 67-357

BSA Camshaft - A10 Super Rocket, RGS and Spitfire - Circa 1958-63 - 357 Profile Hepolite billet camshaft suitable for swinging arm models circa 1958-63....

Quantity:

+ −

CODE: camshaft0103-B7

BSA Camshaft - All A50 and Early A65 Models - Standard Profile

£144.95 (£173.94 inc VAT)

OEM: 68-0103, 68-103

BSA Camshaft - All A50 and Early A65 Models - Standard Profile Hepolite billet camshaft as fitted to all A50 models + early A65 models up to 1964. Soft...

Quantity:

+ −

CODE: bolt7064-B13

Triumph Primary Chain Adjuster Bolt - T140 and TR7 Models from 1980 Onwards

£1.45 (£1.74 inc VAT)

OEM: 21-7064, S7064

Triumph Primary Chain Adjuster Bolt - T140 and TR7 Models from 1980 Onwards Primary chain adjuster screw as fitted to later Triumph 750cc twins. Length...

Quantity:

+ −

CODE: o/sw2930-B13

Triumph Oil Pressure Switch Rubber Boot - Veglia Type

£3.95 (£4.74 inc VAT)

OEM: 71-2930, E12930

Triumph Oil Pressure Switch Rubber Boot - Veglia Type Later type as with the Veglia type oil pressure switch. Can also be used instead of the plain type...

Quantity:

+ −

CODE: e-sprock3108-B9

Triumph Pre Unit Engine Sprocket - 500/650cc Models Circa 1953-61

£24.95 (£29.94 inc VAT)

OEM: 70-3108, E3108

Triumph Pre Unit Engine Sprocket - 500/650cc Models Circa 1953-61 Correct fitment on 5T, T100, TR5, T110, T120, TR6 and 6T models. Number of Teeth: 19T,...

Select Options

CODE: oilseal1242

BSA Primary Chaincase Oil Seal - A7 and A10 Rigid/Plunger Frame Models - Circa 1947-57

£2.95 (£3.54 inc VAT)

OEM: 67-1242

BSA Primary Chaincase Oil Seal - A7 and A10 Rigid/Plunger Frame Models - Circa 1947-57 Chaincase / gearbox mainshaft oil seal - correct fitment on...

Quantity:

+ −

CODE: bolt0011-B19

BSA M20/M21 Cylinder Head Bolt - Circa 1937-63 - Long Type

£5.95 (£7.14 inc VAT)

OEM: 36-0011, 36-11

BSA M20/M21 Cylinder Head Bolt - Circa 1937-63 - Long Type High quality BZP plated high tensile bolt. 10 required for models from 1950 onwards. Earlier...

Quantity:

+ −

CODE: wash3770-B13

Triumph Serrated Gearbox Clamp Washer - Pre Unit 500/650cc Models Circa 1956-62

£2.45 (£2.94 inc VAT)

OEM: 82-3770, F3770

Triumph Serrated Gearbox Clamp Washer - Pre Unit 500/650cc Models Circa 1956-62 Serrated clamping washer, fits on the top gearbox mounting stud to...

Quantity:

+ −

CODE: stud3114-B19

Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73

£2.95 (£3.54 inc VAT)

OEM: 70-3114, E3114

Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73 Drive side crankshaft to alternator rotor stud - later pre unit...

Quantity:

+ −

CODE: off-esprk418

BSA C15/B40 - Duplex Engine Primary Drive Sprocket - 18T

£25.95 (£31.14 inc VAT)

OEM: 40-0582, 40-582

BSA C15/B40 - Duplex Engine Primary Drive Sprocket - 18T Crankshaft sprocket for BSA C15, C25, B25 and B40 trials/competition models. You will need to...

Quantity:

+ −

40-0025, 40-25 - BSA Crankshaft Oil Seal - Trials Models - Thin Type For Talon 18T Engine Sprocket

CODE: oilseal40526

BSA C15/B40 Crankshaft Oil Seal - Thin Type For Talon 18T Engine Sprocket

£4.95 (£5.94 inc VAT)

OEM: 40-0025, 40-25

BSA Crankshaft Oil Seal - Trials Models - Thin Type For Talon 18T Engine Sprocket Use in conjunction with the Talon 18T engine sprocket on BSA C15, C25,...

Quantity:

+ −

CODE: plate1595-B13

Triumph Patent Plate - Speed Twin Models

£2.95 (£3.54 inc VAT)

OEM: 70-1595, E1595

Triumph Patent Plate - Speed Twin Models Brass timing cover triangular name plate for Speed Twin models. Embossed with: Triumph SPEED TWIN, MADE UNDER...

Quantity:

+ −

CODE: plate2909-B13

Triumph Patent Plate - 650 Twin Models

£5.95 (£7.14 inc VAT)

OEM: 70-2909, E2909

Triumph Patent Plate - 650 Twin Models Brass timing cover triangular name plate for 6T, T120 and TR6 models. Embossed with: Triumph 650 TWIN, MADE UNDER...

Quantity:

+ −

CODE: rollers0375-B18

1/4" x 5/16" Big End Bearing Rollers - BSA B and M Group Models Circa 1938-63 - 25 Pack

£5.95 (£7.14 inc VAT)

OEM: 24-0375, 24-375

1/4" x 5/16" Big End Bearing Rollers - BSA B and M Group Models Circa 1938-63 - 25 Pack Connecting rod big end crank pin rollers - correct fitment on BSA...

Quantity:

+ −

CODE: plate1678-B13

Triumph Patent Plate - Tiger 100 Models

£2.95 (£3.54 inc VAT)

OEM: 70-1678, E1678

Triumph Patent Plate - Tiger 100 Models Brass timing cover triangular name plate for Tiger 100 models. Embossed with: Triumph TIGER 100, MADE UNDER...

Quantity:

+ −

CODE: screw0496-B18

Triumph Primary Chaincase Oil Adjuster Screw - Pre Unit Twins Circa 1939-62

£2.95 (£3.54 inc VAT)

OEM: 57-0496, T496

Triumph Primary Chaincase Oil Adjuster Screw - Pre Unit Twins Circa 1939-62 Rear chain oiler / oil restrictor screw - correct fitment on all pre unit...

Quantity:

+ −

CODE: spring0497-B18

Triumph Primary Chaincase Oil Adjuster Spring - Pre Unit Twins Circa 1939-62

£1.95 (£2.34 inc VAT)

OEM: 57-0497, T497

Triumph Primary Chaincase Oil Adjuster Spring - Pre Unit Twins Circa 1939-62 Spring for use with the rear chain oiler / oil restrictor screw, as fitted to...

Quantity:

+ −

57-1381, 57-1556, T1381, T1556 - Triumph Clutch Oil Seal Retaining Plate - Pre Unit Twins From 1957 Onwards

CODE: wash1381-B23

Triumph Clutch Oil Seal Retaining Plate Washer - Pre Unit Twins From 1957 Onwards

£2.45 (£2.94 inc VAT)

OEM: 57-1381, 57-1556, T1381, T1556

Triumph Clutch Oil Seal Retaining Plate - Pre Unit Twins From 1957 Onwards Oil sealing washer, locates within the inner chaincase behind the retaining...

Quantity:

+ −

CODE: cambush0686-B8

BSA Camshaft / Idler Pinion Bush - A7 and A10 Models From 1947 Onwards

£29.95 (£35.94 inc VAT)

OEM: 67-0686, 67-686

BSA Camshaft / Idler Pinion Bush - A7 and A10 Models From 1947 Onwards As used on both the camshaft driveside and gearside (2 required) + inner idler...

Quantity:

+ −

67-0685, 67-685 - BSA Camshaft Pinion Tab Washer - A7, A10, A50 and A65 Models

CODE: tab-0685-B18

BSA Camshaft Pinion Tab Washer - A7 and A10 Models Circa 1947-62 + All A50 and A65 Models

£0.95 (£1.14 inc VAT)

OEM: 67-0685, 67-685

BSA Camshaft Pinion Tab Washer - A7, A10, A50 and A65 Models Camshaft pinion lockwasher - correct fitment on A7 and A10 models circa 1947-62. Also used...

Quantity:

+ −

70-4154, E4154 - Triumph Primary Chaincase Drain Plug - 350/500cc Unit Twins from 1961-68

CODE: plug4154-B13

Triumph Primary Chaincase Drain Plug - 350/500cc Unit Twins Circa 1961-68

£1.95 (£2.34 inc VAT)

OEM: 70-4154, E4154

Triumph Primary Chaincase Drain Plug - 350/500cc Unit Twins from 1961-68 Primary cover oil drain plug with right hand thread. Correct fitment on unit 3TA,...

Quantity:

+ −

CODE: bigend1176-B3

BSA Large Journal Big End Bearing Shells - A10 Road Rocket and Super Rocket - Circa 1956-58

£21.95 (£26.34 inc VAT)

OEM: B2033LC, 67-1176

BSA Large Journal Big End Bearing Shells - A10 Road Rocket and Super Rocket - Circa 1956-58 2 pairs of large journal big end shells for BSA A10 models...

Select Options

CODE: wash8896

Triumph/BSA Timing/Tacho Drive Plug Alloy Washer - Unit Singles and Twins From 1968 Onwards

£0.45 (£0.54 inc VAT)

OEM: 70-8896, E8896

Triumph/BSA Timing/Tacho Drive Plug Alloy Washer - Unit Singles and Twins From 1968 Onwards Crankcase timing aperture plug and/or tacho drive plug alloy...

Quantity:

+ −

CODE: bush0378-B8

Triumph Timing Cover Crankshaft Oil Feed Bush - 500/650cc Pre Unit Models From 1946 Onwards

£7.45 (£8.94 inc VAT)

OEM: 70-0378, E378

Triumph Timing Cover Crankshaft Oil Feed Bush - 500/650cc Pre Unit Models From 1946 Onwards Timing gear cover to crankshaft oil feed bush as fitted to all...

Quantity:

+ −

CODE: studset765-B14

Triumph Crankcase Bolt Set - Unit 650cc Models Circa 1967-68

£19.95 (£23.94 inc VAT)

OEM: 70-4856, 70-5963, 70-2888, 70-4541, 70-4540, 70-4098, E4856, E5963, E2888, E4541, E4540, E4098, S25-3, S1-51

Triumph Crankcase Bolt Set - Unit 650cc Models Circa 1967-68 Complete set of studs, bolts, nuts and washers suitable for T120 and TR6 models from...

Quantity:

+ −

CODE: stud2022-B19

Triumph Magneto To Crankcase Fixing Stud - Pre Unit 350/500/650cc Models - Circa 1946-62

£1.95 (£2.34 inc VAT)

OEM: 70-2022, E2022

Triumph Magneto To Crankcase Fixing Stud - Pre Unit 350/500/650cc Models - Circa 1946-62 Correct fitment on pre unit 3T, 5T, TR5, 6T, T110, TR6 and T120...

Quantity:

+ −

CODE: stud1539-B19

Triumph Crankcase Oil Pipe Block Stud - Pre Unit 350/500/650cc Twins From 1939-62

£2.95 (£3.54 inc VAT)

OEM: 70-1539, E1539

Triumph Crankcase Oil Pipe Block Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil junction block to crankcase stud - correct fitment on pre-unit...

Quantity:

+ −

CODE: dowel1532-B13

Triumph Oil Junction Block / Tappet Oil Feed Dowel - Pre Unit Twins - 1939-62 + Unit 650/750cc Models

£1.95 (£2.34 inc VAT)

OEM: 70-1532, E1532

Triumph Oil Junction Block / Tappet Oil Feed Dowel - Pre Unit Twins - 1939-62 + Unit 650/750cc Models Oil junction block to crankcase hollow dowel -...

Quantity:

+ −

Oil Pressure Gauge - 1+3/4" Diameter With 3/8" UNF Thread - Liquid Filled - Gauge Only

CODE: o/gauge500

Oil Pressure Gauge - 1+3/4" Diameter With 3/8" Tapered 26 TPI Thread - Liquid Filled

£33.95 (£40.74 inc VAT)

Oil Pressure Gauge - 1+3/4" Diameter With 3/8" Tapered 26 TPI Thread - Liquid Filled Universal fit as required. Polished stainless steel bezel, chrome...

Options

CODE: wash2288

Triumph 3/8" Serrated Lock Washer - T140 Brake Hose / Flywheel + Various Uses

£0.35 (£0.42 inc VAT)

OEM: 70-2288, E2288

Triumph 3/8" Serrated Lock Washer - T140 Brake Hose / Flywheel + Various Uses Shakeproof serrated lock washer as used on many pre unit and unit Triumph...

Quantity:

+ −

CODE: nut2520-B13

BSA Engine Sprocket Cush Drive Bearing Nut - B, C and M Group models Circa 1937-54

£11.95 (£14.34 inc VAT)

OEM: 65-2520

BSA Engine Sprocket Cush Drive Bearing Nut - B, C and M Group models Circa 1937-54 Correct fitment on all B31, B32, B33, B34, M20, M21 models circa...

Quantity:

+ −

CODE: screwkit-950M-B9

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo models Circa 1946-53

£37.95 (£45.54 inc VAT)

OEM: E1049, E427, E2691 , E329. T452, E573, 70-1049, 70-0427, 70-2691, 70-0329, 57-0452, 70-0573

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo models Circa 1946-53 Complete set of engine/gearbox screws suitable for 5T, T100,...

Quantity:

+ −

CODE: screwkit-951M-B9

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo Models Circa 1954-55

£37.95 (£45.54 inc VAT)

OEM: E1049, E427, E2691, T452, E573, 70-1049, 70-0427, 70-2691, 57-0452, 70-0573

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo Models Circa 1954-55 Complete set of engine/gearbox screws suitable for 5T, T100,...

Quantity:

+ −

CODE: bearing8780-F4

Triumph/BSA Crankshaft Roller Bearing - Timing Side - T150, T160 and A75 Models

£34.95 (£41.94 inc VAT)

OEM: 70-8780, E8780

Triumph/BSA Crankshaft Roller Bearing - Timing Side - T150, T160 and A75 Models Crankshaft timing side main bearing - correct fitment on 750cc triples...

Quantity:

+ −

CODE: wash0644-B18

BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards

£1.25 (£1.50 inc VAT)

OEM: 67-0644, 67-644

BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards Half time pinion lockwasher as used on all A50 and A65 models from...

Quantity:

+ −

CODE: bolt6505-B14

1/4" UNC x 7/8" Countersunk Screw - Triumph Unit 500cc Models + Universal Use

£0.45 (£0.54 inc VAT)

OEM: 14-6505

1/4" UNC x 7/8" Countersunk Screw - Triumph Unit 500cc Models + Universal Use Flat head slotted screw as used on T100 models from 1969 onwards: Gearbox...

Quantity:

+ −

CODE: screwkit-952M-B9

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit 5T and 6T Models From 1956-62

£37.95 (£45.54 inc VAT)

OEM: E3439, E3437, E3444, E3442, E3438, 70-3439, 70-3437, 70-3444, 70-3442, 70-3438

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit 5T and 6T Models From 1956-62 Complete set of engine/gearbox screws suitable for later 5T...

Quantity:

+ −

CODE: screwkit-953M-B9

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit T110, T120 and TR6 Models From 1960-62

£37.95 (£45.54 inc VAT)

OEM: E3439, E3437, E3440, E3442, E3438, 70-3439, 70-3437, 70-3440, 70-3442, 70-3438

Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit T110, T120 and TR6 Models From 1960-62 Complete set of engine/gearbox screws suitable for...

Quantity:

+ −

CODE: wash1738

Triumph Primary Adjuster Drain Plug Fibre Washer - 350/500/650cc Models Circa 1961-74

£0.45 (£0.54 inc VAT)

OEM: 57-1738, T1738, 02-0100, GS761

Triumph Primary Adjuster Drain Plug Fibre Washer - 350/500/650cc Models Circa 1961-74 Drain and adjuster plug fibre washer - correct fitment on 3TA, 5TA,...

Quantity:

+ −

CODE: dowel8751-B13

Triumph Cylinder Base / Crankcase Halves Hollow Dowel - Pre Unit and Unit Twins and Triples

£1.95 (£2.34 inc VAT)

OEM: 70-8751, 70-1534, E8751, E1534

Triumph Cylinder Base / Crankcase Halves Hollow Dowel - Pre Unit and Unit Twins and Triples Stud to crankcase hollow dowel as used on various models...

Quantity:

+ −

CODE: bolt1919-B19

5/16" UNC - 1+5/8" Hexagonal Bolt - Part Threaded - 21-1919

£1.95 (£2.34 inc VAT)

OEM: 21-1919, S1919

5/16" UNC - 1+5/8" Hexagonal Bolt - Part Threaded - 21-1919 As used on various Triumph models - drive side crankcase bolt on unit twins from 1969...

Quantity:

+ −

21-0585, S585 - Triumph Rear Spindle Nut - T100, T120, T150 and T160 Models From 1970 Onwards

CODE: nut0585-C14

Triumph Rear Wheel Spindle Nut - T100, T120, T150 and T160 Models From 1970 Onwards

£2.95 (£3.54 inc VAT)

OEM: 21-0585, S585

Triumph Rear Wheel Spindle Nut - T100, T120, T150 and T160 Models From 1970 Onwards Rear axle nut on later T100 and T120 models + 750cc triples from 1970...

Quantity:

+ −

CODE: dowel1579-B13

Triumph Crankcase Joint Dowel - Pre Unit 350/500/650cc Models Circa 1946-62

£1.95 (£2.34 inc VAT)

OEM: 70-1579, E1579

Triumph Crankcase Joint Dowel - Pre Unit 350/500/650cc Models Circa 1946-62 Crankcase halves dowel - correct fitment on pre unit twins including: 3T, 5T,...

Quantity:

+ −

CODE: screw1075-B2

Triumph Long Breather Tube Stub/Cover Plate Screw - 500/650/750cc Unit Twins - 1970-78

£0.95 (£1.14 inc VAT)

OEM: 71-1075, E11075

Triumph Long Breather Tube Stub/Cover Plate Screw - 500/650/750cc Unit Twins - 1970-78 3/16" Pozi-drive countersunk screw used to secure the breather...

Quantity:

+ −

CODE: screw1077-B2

Triumph Short Breather Tube Stub/Cover Plate Screw - 500/650/750cc Unit Twins - 1970-83

£0.45 (£0.54 inc VAT)

OEM: 71-1077, E11077

Triumph Short Breather Tube Stub/Cover Plate Screw - 500/650/750cc Unit Twins - 1970-83 3/16" Pozi-drive countersunk screw used to secure the breather...

Quantity:

+ −

CODE: wash1257

Triumph/BSA Gearbox Oil Level Drain Plug Washer - 350/500/650/750cc Models From 1960 Onwards

£0.45 (£0.54 inc VAT)

OEM: 57-1257, T1257, 40-3089

Triumph/BSA Gearbox Oil Level Drain Plug Washer - 350/500/650/750cc Models From 1960 Onwards Gearbox level plug fibre washer - correct fitment on various...

Quantity:

+ −

CODE: ring4803

Triumph Tacho Cable Adaptor O Ring - 350/500/650cc Models From 1963-65 + Tiger Cub

£0.25 (£0.30 inc VAT)

OEM: 70-4803, E4803

Triumph Tacho Cable Adaptor O Ring - 350/500/650cc Models From 1963-65 + Tiger Cub Rubber O ring locates between the tacho cable adaptor / union on T90,...

Quantity:

+ −

CODE: enginestud-9495-B13

Triumph Alternator Mounting Stator Stud - Unit 350/500cc Models - Circa 1969-72

£9.45 (£11.34 inc VAT)

OEM: 70-9495, E9495

Triumph Alternator Mounting Stator Stud - Unit 350/500cc Models - Circa 1969-72 Stator stud - correct fitment on T90 and T100 models circa 1969-72. Three...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower

Account Details

Quick Links

Feked.com

Feked Online