.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower Parts

plug7546-B13
£6.95 (£8.34 inc VAT)
OEM: 42-7546
BSA Primary Chaincase Inner Drain and Level Plug - A7 and A10 Models - Circa 1960-62 Correct fitment on later A7 and A10 models from 1959 onwards. Bolt...
+

nut3034-B13
£0.75 (£0.90 inc VAT)
OEM: 67-3034
BSA Gearbox Outer Cover Nut - A, B and 4 Speed C Group Models - Reduced Hexagon Reduced hex nut that secures the gearbox outer cover on A7 and A10 plunger...
+

lift1434-B13
£8.95 (£10.74 inc VAT)
OEM: 66-1434
BSA Exhaust Lifter / Decompressor Spindle Bush  - M20, M21 from 1937-63 - NOS Exhaust valve lifter spindle bush for pre-unit M Group. This is an...
+

plug-S46-15-B18
£2.95 (£3.54 inc VAT)
OEM: S46-15
Triumph Gearbox Oil Drain and Level Plug - Pre Unit Models Circa 1936-1962 Correct fitment on pre unit 3T,  5T, 6T, TR5, T100, T110, T120 and TR6 models...
+

nut4401-B13
£1.95 (£2.34 inc VAT)
OEM: 27-4401
BSA Kickstarter Spring Screw Locknut - A, B and 4 Speed C Group Models Sleeve nut - locates in the gearbox outer cover to secure the return spring anchor...
+

g/box4564-B13
£29.95 (£35.94 inc VAT)
OEM: 70-4564, E4564
Triumph Crankshaft Timing Pinion - 650/750cc Unit Twins Circa 1961-82 25T half time gear - c orrect fitment on 6T, T120 and TR6 models from 1961...
+

shim0187-B18
£5.95 (£7.14 inc VAT)
OEM: 68-0187, 68-0188, 68-0189, 68-187, 68-188, 68-189
BSA Crankshaft Shim Set - A50, A65 From 1962-65 Set of 3 shims: OD: 1+5/8" (41.4mm) ID: 1+3/16" (30.2mm) 1x 0.010" 1x 0.005" 1x 0.003" Made in England...
+

bolt1555-B19
£1.75 (£2.10 inc VAT)
OEM: 70-1555, E1555
Triumph Crankcase Halves Top Rear Bolt - Pre Unit Models Circa 1939-62 Top rear crankcase securing bolt as used on pre unit 5T, TR5, T100, 6T, T110, TR6...
+

cambush0287-B8
£5.95 (£7.14 inc VAT)
OEM: 71-0287
Triumph 650/750cc Camshaft Bush Left Hand - 71-0287 Single camshaft bush, Left Hand Side of engine, Made in England Normally 2 required per engine, one...
+

shim1629-B13
£2.45 (£2.94 inc VAT)
OEM: 71-1629, 71-1630
BSA B50 Engine Sprocket / Main Bearing Shims  - 3 Shim Set ID: 7/8" (22.3mm) OD: 1+9/32" (32.5mm) 3x 0.015" - stack as required. Made in England OEM:...
+

plate1595-B13
£2.95 (£3.54 inc VAT)
OEM: 70-1595, E1595
Triumph Patent Plate - Speed Twin Models Brass timing cover triangular name plate for Speed Twin models. Embossed with: Triumph SPEED TWIN, MADE UNDER...
+

stud0456-B18
£2.45 (£2.94 inc VAT)
OEM: 57-0456, T456
Triumph Engine Plate / Crankcase Bottom Front Stud - 500/650cc Pre Unit Models From 1946-62 Crankcase bottom front stud - correct fitment on 5T, T100,...
+

engine8992-B13
£3.99 (£4.79 inc VAT)
OEM: 70-8992, E8992
Triumph 500cc Sleeve Nut - 70-8992 Alternator wire feed sleeve nut OEM: 70-8992, E8992
+

enginebadge052-B18
£3.95 (£4.74 inc VAT)
OEM: 41-0120
BSA Engine Timing Case Badge - 350 - 41-0120 as fitted on BSA B40 350 models with distributor ignition. Brass/Chrome plate Premium quality! OEM: 41-0120
+

bolt9988-B13
£4.95 (£5.94 inc VAT)
OEM: 70-9988, E9988
Triumph Tacho Drive Slotted Thimble Bolt/Screw Correct fitment for many Triumph 500/650/750cc models. Screws into the end of the exhaust camshaft  to...
+

nut3685-B13
£5.95 (£7.14 inc VAT)
OEM: 70-3685, E3685
Triumph Tacho Drive Nut - Pre-Unit 500/650cc Models Slotted nut to connect the tacho drive to the exhaust camshaft - LH thread. OEM: 70-3685, E3685
+

plug2167-B13
£4.45 (£5.34 inc VAT)
OEM: 57-2167, T2167
Triumph Gearbox Oil Level Drain Plug with Tube - 650/750cc - 1970 onwards Triumph later T120, TR6 and T140, TR7 Unit Twins from 1970 onwards. Also fits...
+

cover3677
£324.95 (£389.94 inc VAT)
OEM: 70-3677, E3677
Triumph Timing Cover With Tacho Drive - Pre Unit Twin Dynamo / Generator Models Complete timing cover assembly with tacho drive, slotted exhaust camshaft...
+

plate4016G-B13
£8.95 (£10.74 inc VAT)
OEM: 70-4016G, E4016G
Triumph Patent Plate - TRW Side Valve Models Brass timing cover triangular name plate for 500cc side valve twins. Supplied with 3 brass  hammer drive...
+

dowel1579-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1579, E1579
Triumph Crankcase Joint Dowel - Pre Unit 350/500/650cc Models Circa 1946-62 Crankcase halves dowel - correct fitment on pre unit twins including: 3T, 5T,...
+

cover3448-B13
£3.45 (£4.14 inc VAT)
OEM: 29-3448
BSA Gearbox Inspection Cover - Swinging Arm A and B Group + 4 Speed C Group Models Correct fitment on A7, A10, B31, B33 swinging arm models + C10L, C11G...
+

gear0339-B18
£43.95 (£52.74 inc VAT)
OEM: 67-0339, 67-339
BSA Crankshaft Timing Pinion - A7 and A10 From 1947 Onwards + All A50 and A65 Models 22 tooth crankshaft timing gear as used on all A50 and A65 models...
+

spacer3384-B13
£14.95 (£17.94 inc VAT)
OEM: 70-3384, E3384
Triumph Crankshaft Drive Side Distance Piece - Pre Unit 500/650cc Dynamo Models - Circa 1954-56 Non stepped engine sprocket spacer with keyway. Correct...
+

enginebadge051-B18
£3.95 (£4.74 inc VAT)
OEM: 40-0231
BSA Engine Timing Case Badge - 250 - 41-0120 as fitted on BSA C15 250 models with distributor ignition. Brass/Chrome plate Premium quality! OEM: 40-0231
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.