.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower Parts

wash1381-B23
£2.45 (£2.94 inc VAT)
OEM: 57-1381, 57-1556, T1381, T1556
Triumph Clutch Oil Seal Retaining Plate - Pre Unit Twins From 1957 Onwards Oil sealing washer, locates within the inner chaincase behind the retaining...
+

stud0456-B18
£2.45 (£2.94 inc VAT)
OEM: 57-0456, T456
Triumph Engine Plate / Crankcase Bottom Front Stud - 500/650cc Pre Unit Models From 1946-62 Crankcase bottom front stud - correct fitment on 5T, T100,...
+

dowel1535-B13
£2.45 (£2.94 inc VAT)
OEM: 70-1535, E1535
Triumph Crankcase to Timing Cover Dowel - Pre Unit 500/650cc Models Circa 1939-62 Hollow crankcase to timing cover dowel - used to position and secure...
+

plug1792-B13
£2.45 (£2.94 inc VAT)
OEM: 82-1792, F1792
Triumph Oil Tank Drain Plug - Pre Unit Models Circa 1946-62 + T20 Models Circa 1959-63 Oil tank drain plug as used on pre unit models from 1946 onwards...
+

wash0645-B18
£2.45 (£2.94 inc VAT)
OEM: 67-0645, 67-645
BSA Crankshaft Timing Side Washer - A7 and A10 From 1947 Onwards + All A50 and A65 Models Locates between the timing pinion and the oil pump worm drive...
+

stud1536-B13
£2.25 (£2.70 inc VAT)
OEM: 70-1536, E1536
Triumph Crankcase to Oil Pump Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil pump body to crankcase fixing stud - Correct fitment on pre-unit twins...
+

engine4152-B18
£1.95 (£2.34 inc VAT)
OEM: 70-4152, E4152
Triumph Primary Chain Tensioner Blade Rod - 70-4152 To adjust the tension of the primary chain, on some Triumph models OEM: 70-4152, E4152
+

spring0497-B18
£1.95 (£2.34 inc VAT)
OEM: 57-0497, T497
Triumph Primary Chaincase Oil Adjuster Spring - Pre Unit Twins Circa 1939-62 Spring for use with the rear chain oiler / oil restrictor screw, as fitted to...
+

plug4154-B13
£1.95 (£2.34 inc VAT)
OEM: 70-4154, E4154
Triumph Primary Chaincase Drain Plug - 350/500cc Unit Twins from 1961-68 Primary cover oil drain plug with right hand thread. Correct fitment on unit 3TA,...
+

dowel1532-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1532, E1532
Triumph Oil Junction Block / Tappet Oil Feed Dowel - Pre Unit Twins - 1939-62 + Unit 650/750cc Models Oil junction block to crankcase hollow dowel -...
+

dowel8751-B13
£1.95 (£2.34 inc VAT)
OEM: 70-8751, 70-1534, E8751, E1534
Triumph Cylinder Base / Crankcase Halves Hollow Dowel - Pre Unit and Unit Twins and Triples Stud to crankcase hollow dowel as used on various models...
+

dowel1579-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1579, E1579
Triumph Crankcase Joint Dowel - Pre Unit 350/500/650cc Models Circa 1946-62 Crankcase halves dowel - correct fitment on pre unit twins including: 3T, 5T,...
+

circlip2240-B13
£1.95 (£2.34 inc VAT)
OEM: 65-2240
BSA Crankshaft Main Bearing Drive Side Circlip - M and B Group Models Circa 1939-63 Main bearing spring ring - drive end. Correct fitment on all B31, B33,...
+

bolt0645-B18
£1.95 (£2.34 inc VAT)
OEM: 15-0645
BSA Primary Chaincase/Crankcase Drain Plug Bolt - A7, A10, A50, A65 Models From 1960 Onwards Correct fitment on later A7 and A10 models from 1959 onwards...
+

nut4401-B13
£1.95 (£2.34 inc VAT)
OEM: 27-4401
BSA Kickstarter Spring Screw Locknut - A, B and 4 Speed C Group Models Sleeve nut - locates in the gearbox outer cover to secure the return spring anchor...
+

wash1031-B18
£1.95 (£2.34 inc VAT)
OEM: 57-1031, T1031
Triumph Primary Chaincase Oil Retainer Plate - Pre Unit Twins Circa 1952-56 Oil sealing washer, locates within the inner chaincase behind the retaining...
+

woodruff0082-B18
£1.75 (£2.10 inc VAT)
OEM: 71-0082, E3974, E10082
Triumph Alternator Rotor Woodruff Key - 5/32" x 5/32" x 3/4" Suitable for all Pre-Unit and Unit Triumph Twins fitted with an Alternator OEM: 71-0082,...
+

spring3724-B13
£1.75 (£2.10 inc VAT)
OEM: 70-3724, E3724
Triumph Oil Sump Filter Retaining Spring - 350/500cc Models OD: 7/16" (10.6mm) Length uncompressed: 7/16" (10.8mm) OEM: 70-3724, E3724
+

bolt0361-B18
£1.75 (£2.10 inc VAT)
OEM: 57-0361, T361
Triumph Gearbox Level Plug Bolt - Unit 350/500/650cc Models Circa 1959-68 + Knee Grip Mounting Plates Level plug bolts for use with drain plug 57-1112....
+

bolt1555-B19
£1.75 (£2.10 inc VAT)
OEM: 70-1555, E1555
Triumph Crankcase Halves Top Rear Bolt - Pre Unit Models Circa 1939-62 Top rear crankcase securing bolt as used on pre unit 5T, TR5, T100, 6T, T110, TR6...
+

dowel0989-B18
£1.55 (£1.86 inc VAT)
OEM: 57-0989, T989
Triumph Crankcase Timing Side and Gearbox Dowel - Various Models Hollow dowel as used on Triumph crankcases, gearbox cases, chain cases etc. Also some...
+

screw4255-B13
£1.45 (£1.74 inc VAT)
OEM: 60-4255, D208-5, D4255
Triumph Patent Plate Hammer Drive Screw/Rivet Set Set of three correct hammer drive screws to secure the timing cover triangular name plate on all 500,...
+

bolt7064-B13
£1.45 (£1.74 inc VAT)
OEM: 21-7064, S7064
Triumph Primary Chain Adjuster Bolt - T140 and TR7 Models from 1980 Onwards Primary chain adjuster screw as fitted to later Triumph 750cc twins. Length...
+

screw4255-brass-B13
£1.45 (£1.74 inc VAT)
OEM: 60-4255, D208-5, D4255
Triumph Brass Patent Plate Hammer Drive Rivet / Screw Set Set of three brass hammer drive rivets to secure the timing cover triangular name plate as used...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.