.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower Parts

wash7518
£0.15 (£0.18 inc VAT)
OEM: 66-7518
1/4" Fibre Washer - BSA Primary Chaincase / Crankcase Drain Plug + Universal Use Locates on the chaincase drain plug bolt on later A7 and A10 models from...
+

ring4803
£0.25 (£0.30 inc VAT)
OEM: 70-4803, E4803
Triumph Tacho Cable Adaptor O Ring - 350/500/650cc Models From 1963-65 + Tiger Cub Rubber O ring locates between the tacho cable adaptor / union on T90,...
+

7-32-ball-F4
£0.25 (£0.30 inc VAT)
OEM: S70-7, 60-2363, D2363, 70-8019, E8019
7/32" Ball Bearing - Single Ball - Universal Use Diameter: 7/32" (5.6mm) As used in all standard dual or 4 valve oil pump assemblies on Triumph pre unit...
+

screw081H-B18
£0.45 (£0.54 inc VAT)
OEM: 70-8177, 57-4672
Contersunk Screw - Rotor Cover - 70-8177 To screw the rotor cover on the primary chaincase OEM: 70-8177, 57-4672
+

washer4262
£0.45 (£0.54 inc VAT)
OEM: 60-4262, PT104B, D4262
Triumph/AMC Fibre Sealing Washer - 60-4262 Used in various places on Triumph, AJS and Matchless bikes, including the oil tank washer. OEM: 60-4262,...
+

wash3887
£0.45 (£0.54 inc VAT)
OEM: 70-3887, E3887
Triumph Oil Pump Mounting Serrated Washer - Conical Type - 350/500/650/750cc Unit Twins Correct for all unit twins - 3TA, 5TA, T90, T100, 6T, TR6, T120,...
+

wash8896
£0.45 (£0.54 inc VAT)
OEM: 70-8896, E8896
Triumph/BSA Timing/Tacho Drive Plug Alloy Washer - Unit Singles and Twins From 1968 Onwards Crankcase timing aperture plug and/or tacho drive plug alloy...
+

wash1738
£0.45 (£0.54 inc VAT)
OEM: 57-1738, T1738, 02-0100, GS761
Triumph Primary Adjuster Drain Plug Fibre Washer - 350/500/650cc Models Circa 1961-74 Drain and adjuster plug fibre washer - correct fitment on 3TA, 5TA,...
+

wash1257
£0.45 (£0.54 inc VAT)
OEM: 57-1257, T1257, 40-3089
Triumph/BSA Gearbox Oil Level Drain Plug Washer - 350/500/650/750cc Models From 1960 Onwards Gearbox level plug fibre washer - correct fitment on various...
+

spring0403-B18
£0.45 (£0.54 inc VAT)
OEM: 70-0403, E403
Triumph 2 Valve Oil Pump Spring - Pre Unit and Unit Twins From 1939 Onwards Locates within the screwed plugs in the bottom of the pump under the valve...
+

wash0588
£0.45 (£0.54 inc VAT)
OEM: 68-0588, 71-4443, E14443
BSA Oil Feed Pipe O Ring - A50 and A65 Models Circa 1965-72 Rubber O ring seal for oil lines on A50 and A65 models from 1965-72. Also used between the...
+

screw3821-B13
£0.45 (£0.54 inc VAT)
OEM: 70-3821, E3821, 40-0246
2BA - 5/16" Countersunk Screw - Triumph/BSA Sprocket Cover Plate - Unit Twins and Singles Oil seal housing countersunk screw as used on 3TA, 5TA, T100,...
+

spacer830-B18
£0.75 (£0.90 inc VAT)
OEM: 70-3448, E3448
Alternator Spacer - Triumph - 70-3448 OEM: 70-3448, E3448
+

bolt4539-B13
£0.75 (£0.90 inc VAT)
OEM: 70-4539, E4539
Triumph Crankcase Oilway Plug - Unit 650cc Models Circa 1963-68 Crankcase level plug / bolts - locates in the lower mid section of the crankcase below...
+

nut3034-B13
£0.75 (£0.90 inc VAT)
OEM: 67-3034
BSA Gearbox Outer Cover Nut - A, B and 4 Speed C Group Models - Reduced Hexagon Reduced hex nut that secures the gearbox outer cover on A7 and A10 plunger...
+

wash3723
£0.75 (£0.90 inc VAT)
OEM: 70-3723, E3723
Triumph Oil Sump Filter Cork Sealing Washer - Unit 350/500cc Models Cork sump filter sealing gasket as used 3TA, 5TA, T100 and TR5T models from 1959...
+

shim2660-B13
£0.75 (£0.90 inc VAT)
OEM: 71-2660, E12660
Triumph Crankshaft / Engine Sprocket Shim - Later 500/650cc Twins, 750cc Twins + 750cc Triples Engine sprocket alignment shim / distance piece - locates...
+

washer1880
£0.85 (£1.02 inc VAT)
OEM: 82-1880, F1880
Triumph Copper Sealing Washer - 82-1880 Used in various places on Triumph engines, including the sump bolt washer. OEM: 82-1880, F1880
+

screw205-B18
£0.95 (£1.14 inc VAT)
OEM: 82-4129, F4129
Contersunk Screw - Rotor Cover or Tank Badge - 82-4129 To screw the rotor cover on the primary chaincase. Can also be used for Tank Badges, but my need to be...
+

nut3732-B13
£0.95 (£1.14 inc VAT)
OEM: 70-3732
Oil Pump Nut - 70-3732 Triumph Engine Oil Pump Nut, to secure oil pump to engine stud. OEM: 70-3732
+

wash2441
£0.95 (£1.14 inc VAT)
OEM: 70-2441, 60-7132, E2441, D7132
1/4" (6.35mm) Annealed Copper Washer - Various Applications ID: 1/4" (6.35mm) OD: 7/16" (11mm) OEM: 70-2441, 60-7132, E2441, D7132
+

bolt0543-B18
£0.95 (£1.14 inc VAT)
OEM: 21-0543, S543
Triumph Gearbox Oil Level Drain Plug Bolt - 650/750cc - 1970 Onwards Triumph later T120, TR6 and T140, TR7 Unit Twins from 1970 onwards + Trident models...
+

bolt9330-B13
£0.95 (£1.14 inc VAT)
OEM: 70-9330, E9330
Triumph Oilway Plug Bolt - 650/750cc Unit Twins From 1968 Onwards Crankcase timing side oil way plug as fitted to T120, TR6 models from 1968 onwards + all...
+

tab-0685-B18
£0.95 (£1.14 inc VAT)
OEM: 67-0685, 67-685
BSA Camshaft Pinion Tab Washer - A7, A10, A50 and A65 Models Camshaft pinion lockwasher - correct fitment on A7 and A10 models circa 1947-62. Also used...
+

screw0498-B18
£0.95 (£1.14 inc VAT)
OEM: 02-0498, 2-498
BSA Gearbox Inspection Cover Short Screw - A and B Group Swinging Arm Models Inspection cover plate screw used in conjunction with the 3 longer stepped...
+

wash0138-B18
£0.95 (£1.14 inc VAT)
OEM: 76-0138, 76-138
BSA Oil Pump Stud Tab Washer - A50 and A65 Models Circa 1964-73 Tabbed lock washer - locates between the oil pump housing and the securing stud. Correct...
+

nut1906-B13
£0.95 (£1.14 inc VAT)
OEM: 21-1906, S1906
Triumph Oil Pump Mounting Nut - 500/650cc Models From 1969 Onwards + 750cc Twins Circa 1973-79 Bevelled oil pump mounting nut with UNF threads. Correct...
+

engine213-B18
£1.25 (£1.50 inc VAT)
OEM: 82-9435, F9435
Triumph Oil Metering Screw - 82-9435 Oil metering screw for the Triumph OEM: 82-9435, F9435
+

wash2521-B13
£1.25 (£1.50 inc VAT)
OEM: 65-2521
BSA Engine Mainshaft Lock Washer - B31, A10, A7 ID for shaft size 7/8" OD: 1+9/16" Made in England OEM: 65-2521
+

wash0644-B18
£1.25 (£1.50 inc VAT)
OEM: 67-0644, 67-644
BSA Crankshaft Gear Side Tab Washer - A50, A65, A7 and A10 Models - 1947 Onwards Half time pinion lockwasher as used on all A50 and A65 models from...
+

shim1707-B13
£1.25 (£1.50 inc VAT)
OEM: 66-1707
BSA Cush Drive Bearing Alignment Washer - B & M Group Models - 1940-63 0.32" cush drive bearing to engine sprocket washer as used on B31, B32, B33,...
+

stud1864-B19
£1.25 (£1.50 inc VAT)
OEM: 21-1864, S1864
Triumph Crankcase to Oil Pump Stud - 500/650cc Models From 1969 Onwards + 750cc Twins Circa 1973-79 Oil pump body to crankcase fixing stud with UNF/UNC...
+

screw4255-B13
£1.45 (£1.74 inc VAT)
OEM: 60-4255, D208-5, D4255
Triumph Patent Plate Hammer Drive Screw/Rivet Set Set of three correct hammer drive screws to secure the timing cover triangular name plate on all 500,...
+

bolt7064-B13
£1.45 (£1.74 inc VAT)
OEM: 21-7064, S7064
Triumph Primary Chain Adjuster Bolt - T140 and TR7 Models from 1980 Onwards Primary chain adjuster screw as fitted to later Triumph 750cc twins. Length...
+

screw4255-brass-B13
£1.45 (£1.74 inc VAT)
OEM: 60-4255, D208-5, D4255
Triumph Brass Patent Plate Hammer Drive Rivet / Screw Set Set of three brass hammer drive rivets to secure the timing cover triangular name plate as used...
+

dowel3074-B13
£1.45 (£1.74 inc VAT)
OEM: 66-3074, 70-8010, E8010
BSA Gearbox Cover / Primary Chaincase / Timing Cover Dowel - Various Models From 1949 Onwards Hollow locating dowel used to align the various cases and...
+

dowel0989-B18
£1.55 (£1.86 inc VAT)
OEM: 57-0989, T989
Triumph Crankcase Timing Side and Gearbox Dowel - Various Models Hollow dowel as used on Triumph crankcases, gearbox cases, chain cases etc. Also some...
+

woodruff0082-B18
£1.75 (£2.10 inc VAT)
OEM: 71-0082, E3974, E10082
Triumph Alternator Rotor Woodruff Key - 5/32" x 5/32" x 3/4" Suitable for all Pre-Unit and Unit Triumph Twins fitted with an Alternator OEM: 71-0082,...
+

spring3724-B13
£1.75 (£2.10 inc VAT)
OEM: 70-3724, E3724
Triumph Oil Sump Filter Retaining Spring - 350/500cc Models OD: 7/16" (10.6mm) Length uncompressed: 7/16" (10.8mm) OEM: 70-3724, E3724
+

bolt0361-B18
£1.75 (£2.10 inc VAT)
OEM: 57-0361, T361
Triumph Gearbox Level Plug Bolt - Unit 350/500/650cc Models Circa 1959-68 + Knee Grip Mounting Plates Level plug bolts for use with drain plug 57-1112....
+

bolt1555-B19
£1.75 (£2.10 inc VAT)
OEM: 70-1555, E1555
Triumph Crankcase Halves Top Rear Bolt - Pre Unit Models Circa 1939-62 Top rear crankcase securing bolt as used on pre unit 5T, TR5, T100, 6T, T110, TR6...
+

engine4152-B18
£1.95 (£2.34 inc VAT)
OEM: 70-4152, E4152
Triumph Primary Chain Tensioner Blade Rod - 70-4152 To adjust the tension of the primary chain, on some Triumph models OEM: 70-4152, E4152
+

spring0497-B18
£1.95 (£2.34 inc VAT)
OEM: 57-0497, T497
Triumph Primary Chaincase Oil Adjuster Spring - Pre Unit Twins Circa 1939-62 Spring for use with the rear chain oiler / oil restrictor screw, as fitted to...
+

plug4154-B13
£1.95 (£2.34 inc VAT)
OEM: 70-4154, E4154
Triumph Primary Chaincase Drain Plug - 350/500cc Unit Twins from 1961-68 Primary cover oil drain plug with right hand thread. Correct fitment on unit 3TA,...
+

dowel1532-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1532, E1532
Triumph Oil Junction Block / Tappet Oil Feed Dowel - Pre Unit Twins - 1939-62 + Unit 650/750cc Models Oil junction block to crankcase hollow dowel -...
+

dowel8751-B13
£1.95 (£2.34 inc VAT)
OEM: 70-8751, 70-1534, E8751, E1534
Triumph Cylinder Base / Crankcase Halves Hollow Dowel - Pre Unit and Unit Twins and Triples Stud to crankcase hollow dowel as used on various models...
+

dowel1579-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1579, E1579
Triumph Crankcase Joint Dowel - Pre Unit 350/500/650cc Models Circa 1946-62 Crankcase halves dowel - correct fitment on pre unit twins including: 3T, 5T,...
+

circlip2240-B13
£1.95 (£2.34 inc VAT)
OEM: 65-2240
BSA Crankshaft Main Bearing Drive Side Circlip - M and B Group Models Circa 1939-63 Main bearing spring ring - drive end. Correct fitment on all B31, B33,...
+

bolt0645-B18
£1.95 (£2.34 inc VAT)
OEM: 15-0645
BSA Primary Chaincase/Crankcase Drain Plug Bolt - A7, A10, A50, A65 Models From 1960 Onwards Correct fitment on later A7 and A10 models from 1959 onwards...
+

nut4401-B13
£1.95 (£2.34 inc VAT)
OEM: 27-4401
BSA Kickstarter Spring Screw Locknut - A, B and 4 Speed C Group Models Sleeve nut - locates in the gearbox outer cover to secure the return spring anchor...
+

wash1031-B18
£1.95 (£2.34 inc VAT)
OEM: 57-1031, T1031
Triumph Primary Chaincase Oil Retainer Plate - Pre Unit Twins Circa 1952-56 Oil sealing washer, locates within the inner chaincase behind the retaining...
+

stud1536-B13
£2.25 (£2.70 inc VAT)
OEM: 70-1536, E1536
Triumph Crankcase to Oil Pump Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil pump body to crankcase fixing stud - Correct fitment on pre-unit twins...
+

shim1629-B13
£2.45 (£2.94 inc VAT)
OEM: 71-1629, 71-1630
BSA B50 Engine Sprocket / Main Bearing Shims  - 3 Shim Set ID: 7/8" (22.3mm) OD: 1+9/32" (32.5mm) 3x 0.015" - stack as required. Made in England OEM:...
+

wash1381-B23
£2.45 (£2.94 inc VAT)
OEM: 57-1381, 57-1556, T1381, T1556
Triumph Clutch Oil Seal Retaining Plate - Pre Unit Twins From 1957 Onwards Oil sealing washer, locates within the inner chaincase behind the retaining...
+

stud0456-B18
£2.45 (£2.94 inc VAT)
OEM: 57-0456, T456
Triumph Engine Plate / Crankcase Bottom Front Stud - 500/650cc Pre Unit Models From 1946-62 Crankcase bottom front stud - correct fitment on 5T, T100,...
+

dowel1535-B13
£2.45 (£2.94 inc VAT)
OEM: 70-1535, E1535
Triumph Crankcase to Timing Cover Dowel - Pre Unit 500/650cc Models Circa 1939-62 Hollow crankcase to timing cover dowel - used to position and secure...
+

plug1792-B13
£2.45 (£2.94 inc VAT)
OEM: 82-1792, F1792
Triumph Oil Tank Drain Plug - Pre Unit Models Circa 1946-62 + T20 Models Circa 1959-63 Oil tank drain plug as used on pre unit models from 1946 onwards...
+

wash0645-B18
£2.45 (£2.94 inc VAT)
OEM: 67-0645, 67-645
BSA Crankshaft Timing Side Washer - A7 and A10 From 1947 Onwards + All A50 and A65 Models Locates between the timing pinion and the oil pump worm drive...
+

disc2256-B13
£2.95 (£3.54 inc VAT)
OEM: 70-2256, 68-0132, E2256, 68-132
Triumph/BSA Crankcase Rotary Breather Disc Spring - Various Models Correct fitment for many  Triumph 350, 500 & 650 Unit & Pre-Unit models. Also...
+

plug6347-B13
£2.95 (£3.54 inc VAT)
OEM: 70-6347, E6347
Triumph Primary Chain Oil Drain and Adjuster Plug - Short Type - 650cc Twins from 1966-70 Short type with BSF thread - used on T120 and TR6 models from...
+

stud3114-B19
£2.95 (£3.54 inc VAT)
OEM: 70-3114, E3114
Triumph Crankshaft / Rotor Mounting Stud - Pre Unit and Unit Models Circa 1959-73 Drive side crankshaft to alternator rotor stud - later pre unit...
+

plate1595-B13
£2.95 (£3.54 inc VAT)
OEM: 70-1595, E1595
Triumph Patent Plate - Speed Twin Models Brass timing cover triangular name plate for Speed Twin models. Embossed with: Triumph SPEED TWIN, MADE UNDER...
+

plate1678-B13
£2.95 (£3.54 inc VAT)
OEM: 70-1678, E1678
Triumph Patent Plate - Tiger 100 Models Brass timing cover triangular name plate for Tiger 100 models. Embossed with: Triumph TIGER 100, MADE UNDER...
+

screw0496-B18
£2.95 (£3.54 inc VAT)
OEM: 57-0496, T496
Triumph Primary Chaincase Oil Adjuster Screw - Pre Unit Twins Circa 1939-62 Rear chain oiler / oil restrictor screw - correct fitment on all pre unit...
+

stud1539-B19
£2.95 (£3.54 inc VAT)
OEM: 70-1539, E1539
Triumph Crankcase Oil Pipe Block Stud - Pre Unit 350/500/650cc Twins From 1939-62 Oil junction block to crankcase stud - correct fitment on pre-unit...
+

nut0585-C14
£2.95 (£3.54 inc VAT)
OEM: 21-0585, S585
Triumph Rear Wheel Spindle Nut - T100, T120, T150 and T160 Models From 1970 Onwards Rear axle nut on later T100 and T120 models + 750cc triples from 1970...
+

plug-S46-15-B18
£2.95 (£3.54 inc VAT)
OEM: S46-15
Triumph Gearbox Oil Drain and Level Plug - Pre Unit Models Circa 1936-1962 Correct fitment on pre unit 3T,  5T, 6T, TR5, T100, T110, T120 and TR6 models...
+

plug1871-B13
£2.95 (£3.54 inc VAT)
OEM: 21-1871, S1871
Triumph Tacho Drive Blanking Plug - 650/750cc Twins From 1969 Onwards - LH Thread Screw that plugs the hole in the drive side crankcase when a tachometer...
+

plug4922-B13
£3.25 (£3.90 inc VAT)
OEM: 70-4922, E4922
Triumph Primary Chain Oil Drain and Adjuster Plug - Long Type - 650cc Twins from 1962-65 Long type with BSF thread - used on 6T, T120 and TR6 models...
+

shim0661-B18
£3.45 (£4.14 inc VAT)
OEM: 66-0661, 66-661
BSA Crankshaft Drive Side Shim - B & M Group Models - 1940-63 ID: 1" (25.4mm) OD: 1+9/16" (39.7mm) Thickness: 0.022" (0.5mm) Made in England OEM:...
+

cover3448-B13
£3.45 (£4.14 inc VAT)
OEM: 29-3448
BSA Gearbox Inspection Cover - Swinging Arm A and B Group + 4 Speed C Group Models Correct fitment on A7, A10, B31, B33 swinging arm models + C10L, C11G...
+

plate4016S-B13
£3.95 (£4.74 inc VAT)
OEM: 70-4016
Triumph Patent Plate - Name Plate - 70-4016 Timing cover triangular name plate for all 500, 650, 750cc Triumph Twins. OEM: 70-4016, E4016
+

enginebadge052-B18
£3.95 (£4.74 inc VAT)
OEM: 41-0120
BSA Engine Timing Case Badge - 350 - 41-0120 as fitted on BSA B40 350 models with distributor ignition. Brass/Chrome plate Premium quality! OEM: 41-0120
+

enginebadge051-B18
£3.95 (£4.74 inc VAT)
OEM: 40-0231
BSA Engine Timing Case Badge - 250 - 41-0120 as fitted on BSA C15 250 models with distributor ignition. Brass/Chrome plate Premium quality! OEM: 40-0231
+

enginebadge050-B18
£3.95 (£4.74 inc VAT)
OEM: 68-0321
BSA Engine Timing Case Badge - BSA - 68-0321 BSA early C15, B40 and A50, A65 Timing side engine cover, Silverstar Badge 'BSA' Brass/Chrome plate Premium...
+

wash0300-B18
£3.95 (£4.74 inc VAT)
OEM: 31-0300, 31-300
BSA Crankpin Nut Locking Washer - B & M Group As used on early B and M Group singles. Original BSA part - New Old Stock OEM: 31-0300, 31-300
+

shim2056-B13
£3.95 (£4.74 inc VAT)
OEM: 67-2056, 67-2057, 67-2058
BSA Engine Sprocket Shims  - A7, A10 Models from 1946-62 ID: 1" (25.6mm) OD: 1+7/16" (36.5mm) 5x 0.010" - stack as required. Made in England OEM:...
+

screw4258-B13
£3.95 (£4.74 inc VAT)
OEM: 27-4258
BSA Gearbox Inspection Cover Hex Head Screw - A, B, C and M Group Models Stepped hex head screw that secures the gearbox inspection cover plate - correct...
+

screw7178-E9
£3.95 (£4.74 inc VAT)
OEM: 24-7178
BSA Tank Knee Grip / Number Plate Mounting Screw + Gearbox Inspection Cover on Pre-Unit Models Used extensively on pre-unit and unit BSA models. Fuel...
+

plate4016B-B13
£3.95 (£4.74 inc VAT)
OEM: 70-4016, E4016
Triumph Brass Timing Cover Patent Plate - Pre Unit and Unit Twins - Circa 1959-85 Brass and black timing cover triangular name plate for all pre unit and...
+

engine8992-B13
£3.99 (£4.79 inc VAT)
OEM: 70-8992, E8992
Triumph 500cc Sleeve Nut - 70-8992 Alternator wire feed sleeve nut OEM: 70-8992, E8992
+

plug2167-B13
£4.45 (£5.34 inc VAT)
OEM: 57-2167, T2167
Triumph Gearbox Oil Level Drain Plug with Tube - 650/750cc - 1970 onwards Triumph later T120, TR6 and T140, TR7 Unit Twins from 1970 onwards. Also fits...
+

bolt0243-B18
£4.45 (£5.34 inc VAT)
OEM: 28-0243, 28-243
BSA Gearbox Drain Bolt - Pre Unit A, B and C Models from 1939 Onwards As used on many pre unit A, B and C models Overall Length: 5/8" (15.6mm) UH Length:...
+

plug1034-B18
£4.45 (£5.34 inc VAT)
OEM: 40-1034, 68-3168, 57-2696, T2696, 57-2697, T2697
BSA / Triumph Gearbox Drain Plug and O Ring - A50/A65 Models + Unit Singles Circa 1968 Original type gearbox drain plug as used on A50/A65 models + early...
+

plug2259-B13
£4.95 (£5.94 inc VAT)
OEM: 57-2259, T2259
Triumph Primary Chain Oil Drain and Adjuster Plug - 650/750cc - 1969 Onwards Triumph Unit Twins - T120 from 1969-72, T140 from 1973-79. 7/16" UNC Thread...
+

bolt9988-B13
£4.95 (£5.94 inc VAT)
OEM: 70-9988, E9988
Triumph Tacho Drive Slotted Thimble Bolt/Screw Correct fitment for many Triumph 500/650/750cc models. Screws into the end of the exhaust camshaft  to...
+

disc3822-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3822, 68-0130, 68-130, E3822
Triumph/BSA Crankcase Rotary Breather Disc - Various Models Correct fitment for many  Triumph 350, 500 & 650 Unit & Pre-Unit models. Also fits all...
+

plug1112-B18
£4.95 (£5.94 inc VAT)
OEM: 57-1112, T1112
Triumph Gearbox Oil Drain and Level Plug - Unit 350/500/650cc Models Circa 1959-68 Correct fitment on 3TA, 5TA, T90, T100 models circa 1959-74 + 6T, T120...
+

wash3300-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3300, E3300
Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82 Locates between the right hand main bearing and timing...
+

plate8762-B13
£4.95 (£5.94 inc VAT)
OEM: 70-8762, E8762
Triumph Timing Cover Aperture / Patent Plate - T150 and T160 Trident Models Alloy timing cover triangular name plate for all 750cc triples from 1968...
+

cambush0286-B8
£5.95 (£7.14 inc VAT)
OEM: 71-0286, 70-1479, E1479
Triumph 650/750cc Camshaft Bush Right Hand - 71-0286 Single camshaft bush, Right Hand Side of engine, Made in England Normally 2 required per engine, one...
+

cambush2260-B8
£5.95 (£7.14 inc VAT)
OEM: 70-2260, E2260, E1516, 70-1516
Triumph 650/750cc Camshaft Bush Left Hand - 70-2260 Single camshaft bush, Left Hand Side of engine, Made in England Normally 2 required per engine, one...
+

cambush0287-B8
£5.95 (£7.14 inc VAT)
OEM: 71-0287
Triumph 650/750cc Camshaft Bush Left Hand - 71-0287 Single camshaft bush, Left Hand Side of engine, Made in England Normally 2 required per engine, one...
+

shim0187-B18
£5.95 (£7.14 inc VAT)
OEM: 68-0187, 68-0188, 68-0189, 68-187, 68-188, 68-189
BSA Crankshaft Shim Set - A50, A65 From 1962-65 Set of 3 shims: OD: 1+5/8" (41.4mm) ID: 1+3/16" (30.2mm) 1x 0.010" 1x 0.005" 1x 0.003" Made in England...
+

plug3668-B13
£5.95 (£7.14 inc VAT)
OEM: 57-3668, 57-2167, T2167, T3668, 57-3851, T3851
Triumph Gearbox Oil Drain and Level Plug Assembly - Unit 650/750cc Models - 1968 Onwards Correct fitment on T120, TR6 and T140, TR7 unit twins from 1968...
+

plate2909-B13
£5.95 (£7.14 inc VAT)
OEM: 70-2909, E2909
Triumph Patent Plate - 650 Twin Models Brass timing cover triangular name plate for 6T, T120 and TR6 models. Embossed with: Triumph 650 TWIN, MADE UNDER...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.