.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Engine Lower Parts

cover3677
£324.95 (£389.94 inc VAT)
OEM: 70-3677, E3677
Triumph Timing Cover With Tacho Drive - Pre Unit Twin Dynamo / Generator Models Complete timing cover assembly with tacho drive, slotted exhaust camshaft...
+

cover4167
£324.95 (£389.94 inc VAT)
OEM: 70-4167, E4167
Triumph Timing Cover With Tacho Drive - Pre Unit Alternator Models Complete timing cover assembly with tacho drive, slotted exhaust camshaft nut and...
+

cover7318
£119.95 (£143.94 inc VAT)
OEM: 71-7318, E17318, 70-4567, E4567, 70-8797, E8797, 70-9246, E9246, 71-7042, E17042
Triumph Timing Cover - Unit 650cc Models + 750cc Twins Circa 1963-81 Polished alloy timing cover compatible with either a 2 valve or 4 valve oil pump....
+

gear0339-B18
£43.95 (£52.74 inc VAT)
OEM: 67-0339, 67-339
BSA Crankshaft Timing Pinion - A7 and A10 From 1947 Onwards + All A50 and A65 Models 22 tooth crankshaft timing gear as used on all A50 and A65 models...
+

tappet8801-LFH
£38.95 (£46.74 inc VAT)
OEM: 70-8801, E8801
Triumph Exhaust Cam Follower Tappet - 650/750cc Unit Twins - Circa 1968-1980 Single exhaust tappet / cam follower with oil hole, sits in the tappet block...
 

gear0050-B18
£31.95 (£38.34 inc VAT)
OEM: 68-0050, 68-50
BSA Crankshaft Oil Pump Drive Gear - A50 and A65 Models Circa 1962-72 Left hand oil pump worm drive pinion, as fitted to all A50 and A65 models. OD:...
+

cambush-90-B8
£29.95 (£35.94 inc VAT)
OEM: 71-0286, 71-0287, E10286, E10287
Triumph 750cc Camshaft Bush Set - 71-0286, 71-0287 Triumph T140 Camshaft bush, Left and right sides of engine, Made in England Made in UK by LF Harris,...
+

cambush0686-B8
£29.95 (£35.94 inc VAT)
OEM: 67-0686, 67-686
BSA Camshaft / Idler Pinion Bush - A7 and A10 Models From 1947 Onwards As used on both the camshaft driveside and gearside (2 required) + inner idler...
+

g/box4564-B13
£29.95 (£35.94 inc VAT)
OEM: 70-4564, E4564
Triumph Crankshaft Timing Pinion - 650/750cc Unit Twins Circa 1961-82 25T half time gear - c orrect fitment on 6T, T120 and TR6 models from 1961...
+

g/box3396-G15
£27.95 (£33.54 inc VAT)
OEM: 65-3396
BSA Speedometer Driven Gear Bush - A7 / A10 Models Circa 1960-62 + Early A50 / A65 Models Speedo driven gear with recess for rubber sealing washer -...
+

thrust-wash0685-B18
£21.95 (£26.34 inc VAT)
OEM: 68-0685, 68-685
BSA Crankshaft Thrust Washer - A50 and A65 Models Circa 1966-72 Bronze thrust washer that supports the crankshaft main bearing - correct fitment on...
+

lift1435-B13
£17.95 (£21.54 inc VAT)
OEM: 66-1435
BSA Exhaust Lifter / Decompressor Spindle - M20, M21 from 1937-63 Exhaust valve lifter spindle for pre-unit M Group. This is an original new old stock...
+

engine2440-B13
£14.95 (£17.94 inc VAT)
OEM: 57-2440, T2440
Triumph Rotor Cover - 500/650/750cc Unit Twins Circa 1968-75 Cover for the primary chaincase front over the alternator. Correct fitment on T120, TR6,...
+

spacer3384-B13
£14.95 (£17.94 inc VAT)
OEM: 70-3384, E3384
Triumph Crankshaft Drive Side Distance Piece - Pre Unit 500/650cc Dynamo Models - Circa 1954-56 Non stepped engine sprocket spacer with keyway. Correct...
+

cap063-B4
£13.95 (£16.74 inc VAT)
BSA Chaincase Inspection Cap - B & M Group Models BSA Primary Chaincase Inspection Nut - Suit most B and M Models - B31, B32, B33 and M20, M21 Thread...
+

spring1706-B13
£12.95 (£15.54 inc VAT)
OEM: 66-1706
BSA Cush Drive Spring - B and M Group Models from 1937-54 Correct for all B group models B24, B26,  B31, B32, B33, B3 4 Gold Star  from 1937-54. Also M...
+

nut2520-B13
£11.95 (£14.34 inc VAT)
OEM: 65-2520
BSA Engine Sprocket Cush Drive Bearing Nut - B, C and M Group models Circa 1937-54 Correct fitment on all B31, B32, B33, B34, M20, M21 models circa...
+

spring1136-B18
£10.95 (£13.14 inc VAT)
OEM: 67-1136
BSA Cush Drive Spring - Pre Unit A, B, & M Models - 1955-62 Correct for all swinging arm models with a 2 lobe cush drive cam from 1955-62. Made in...
+

lift1434-B13
£8.95 (£10.74 inc VAT)
OEM: 66-1434
BSA Exhaust Lifter / Decompressor Spindle Bush  - M20, M21 from 1937-63 - NOS Exhaust valve lifter spindle bush for pre-unit M Group. This is an...
+

plate4016G-B13
£8.95 (£10.74 inc VAT)
OEM: 70-4016G, E4016G
Triumph Patent Plate - TRW Side Valve Models Brass timing cover triangular name plate for 500cc side valve twins. Supplied with 3 brass  hammer drive...
+

bush0378-B8
£7.45 (£8.94 inc VAT)
OEM: 70-0378, E378
Triumph Timing Cover Crankshaft Oil Feed Bush - 500/650cc Pre Unit Models From 1946 Onwards Timing gear cover to crankshaft oil feed bush as fitted to all...
+

spindle0375-B18
£7.45 (£8.94 inc VAT)
OEM: 70-0375, E375
Triumph Timing Gear Intermediate Wheel Spindle - All Pre Unit and Unit Twins - Circa 1946-1982 Spindle for intermediate timing gear as fitted to all...
+

nut219-B18
£6.95 (£8.34 inc VAT)
OEM: 42-0071
BSA Engine Sprocket Drive Nut - 42-0071 Sprocket Cush Drive Nut BSA B31, B33, A7, A10 Crankshaft cush drive nut for Swinging Arm models OEM: 42-0071
+

cap004-B4
£6.95 (£8.34 inc VAT)
OEM: 01-4457
AJS/Matchless Primary Chaincase Inspection Cap Suitable for AJS/Matchless Models with the Pressed Steel Chaincase Screw in fixing and bar under the cap...
+

shim0671-B18
£6.95 (£8.34 inc VAT)
OEM: 67-0671, 67-671, 67-672, 67-677, 67-0672, 67-0677
BSA Crankshaft Shim Set - A10, A7 ID: 1+1/4" (31.5mm) OD: 1+11/16" (42.2mm) 2x 0.001" 2x 0.005" 1x 0.010" Made in England OEM: 67-0671, 67-671, 67-672,...
+

shim0066-B18
£6.95 (£8.34 inc VAT)
OEM: 40-0065, 40-0066, 40-0069, 40-66, 40-69
BSA Crankshaft Shim Set - Unit Singles - C15, B25, B40, B44, B50 Also used to shim between the alternator and crankshaft on A50 and A65 models. Set of 5...
+

plug7546-B13
£6.95 (£8.34 inc VAT)
OEM: 42-7546
BSA Primary Chaincase Inner Drain and Level Plug - A7 and A10 Models - Circa 1960-62 Correct fitment on later A7 and A10 models from 1959 onwards. Bolt...
+

plug1505-B13
£6.95 (£8.34 inc VAT)
OEM: 67-1505, 70-8123, E8123
BSA Oil Pressure Release Valve Plug - A7, A10, A50, A65, B40, B25 and C15 Models Correct fitment on all A7, A10 and B40 models + early A50 and A65...
+

shim0633-set-3-B18
£6.45 (£7.74 inc VAT)
OEM: 68-0633, 68-0634, 68-0635, 68-633, 68-634, 68-635
BSA Crankshaft Shim Set - A50, A65 From 1966 Onwards Set of 3 shims: OD: 1+3/4" (44.3mm) ID: 1+1/4" (32mm) 1x 0.010" 1x 0.006" 1x 0.003" Made in England...
+

cambush0286-B8
£5.95 (£7.14 inc VAT)
OEM: 71-0286, 70-1479, E1479
Triumph 650/750cc Camshaft Bush Right Hand - 71-0286 Single camshaft bush, Right Hand Side of engine, Made in England Normally 2 required per engine, one...
+

cambush2260-B8
£5.95 (£7.14 inc VAT)
OEM: 70-2260, E2260, E1516, 70-1516
Triumph 650/750cc Camshaft Bush Left Hand - 70-2260 Single camshaft bush, Left Hand Side of engine, Made in England Normally 2 required per engine, one...
+

cambush0287-B8
£5.95 (£7.14 inc VAT)
OEM: 71-0287
Triumph 650/750cc Camshaft Bush Left Hand - 71-0287 Single camshaft bush, Left Hand Side of engine, Made in England Normally 2 required per engine, one...
+

nut3685-B13
£5.95 (£7.14 inc VAT)
OEM: 70-3685, E3685
Triumph Tacho Drive Nut - Pre-Unit 500/650cc Models Slotted nut to connect the tacho drive to the exhaust camshaft - LH thread. OEM: 70-3685, E3685
+

shim0187-B18
£5.95 (£7.14 inc VAT)
OEM: 68-0187, 68-0188, 68-0189, 68-187, 68-188, 68-189
BSA Crankshaft Shim Set - A50, A65 From 1962-65 Set of 3 shims: OD: 1+5/8" (41.4mm) ID: 1+3/16" (30.2mm) 1x 0.010" 1x 0.005" 1x 0.003" Made in England...
+

plug3668-B13
£5.95 (£7.14 inc VAT)
OEM: 57-3668, 57-2167, T2167, T3668, 57-3851, T3851
Triumph Gearbox Oil Drain and Level Plug Assembly - Unit 650/750cc Models - 1968 Onwards Correct fitment on T120, TR6 and T140, TR7 unit twins from 1968...
+

plate2909-B13
£5.95 (£7.14 inc VAT)
OEM: 70-2909, E2909
Triumph Patent Plate - 650 Twin Models Brass timing cover triangular name plate for 6T, T120 and TR6 models. Embossed with: Triumph 650 TWIN, MADE UNDER...
+

bush0400-B8
£5.95 (£7.14 inc VAT)
OEM: 70-0400, E400
Triumph Timing Gear Intermediate Wheel Bush - Pre Unit and Unit Twins - Circa 1946-1982 Correct fitment on all 350/500/650/750cc pre unit and unit twins...
+

plug3190-B13
£5.95 (£7.14 inc VAT)
OEM: 40-3190
BSA Gearbox Drain Plug and Level Tube - Unit Singles Circa 1965-67 Correct fitment on C15, B25, C25, B40, B44 models from 1965-67. Thin hexagon head -...
+

plate2910-B13
£5.95 (£7.14 inc VAT)
OEM: 70-2910, E2910
Triumph Patent Plate - Tiger 110 Models Alloy timing cover triangular name plate for T110 models. Embossed with: Triumph TIGER 110, MADE UNDER PATENT...
+

plug2259-B13
£4.95 (£5.94 inc VAT)
OEM: 57-2259, T2259
Triumph Primary Chain Oil Drain and Adjuster Plug - 650/750cc - 1969 Onwards Triumph Unit Twins - T120 from 1969-72, T140 from 1973-79. 7/16" UNC Thread...
+

bolt9988-B13
£4.95 (£5.94 inc VAT)
OEM: 70-9988, E9988
Triumph Tacho Drive Slotted Thimble Bolt/Screw Correct fitment for many Triumph 500/650/750cc models. Screws into the end of the exhaust camshaft  to...
+

disc3822-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3822, 68-0130, 68-130, E3822
Triumph/BSA Crankcase Rotary Breather Disc - Various Models Correct fitment for many  Triumph 350, 500 & 650 Unit & Pre-Unit models. Also fits all...
+

plug1112-B18
£4.95 (£5.94 inc VAT)
OEM: 57-1112, T1112
Triumph Gearbox Oil Drain and Level Plug - Unit 350/500/650cc Models Circa 1959-68 Correct fitment on 3TA, 5TA, T90, T100 models circa 1959-74 + 6T, T120...
+

wash3300-B13
£4.95 (£5.94 inc VAT)
OEM: 70-3300, E3300
Triumph Crankshaft Timing Pinion Clamping Washer - Pre Unit + 650/750cc Unit Twins From 1954-82 Locates between the right hand main bearing and timing...
+

plate8762-B13
£4.95 (£5.94 inc VAT)
OEM: 70-8762, E8762
Triumph Timing Cover Aperture / Patent Plate - T150 and T160 Trident Models Alloy timing cover triangular name plate for all 750cc triples from 1968...
+

plug2167-B13
£4.45 (£5.34 inc VAT)
OEM: 57-2167, T2167
Triumph Gearbox Oil Level Drain Plug with Tube - 650/750cc - 1970 onwards Triumph later T120, TR6 and T140, TR7 Unit Twins from 1970 onwards. Also fits...
+

bolt0243-B18
£4.45 (£5.34 inc VAT)
OEM: 28-0243, 28-243
BSA Gearbox Drain Bolt - Pre Unit A, B and C Models from 1939 Onwards As used on many pre unit A, B and C models Overall Length: 5/8" (15.6mm) UH Length:...
+

plug1034-B18
£4.45 (£5.34 inc VAT)
OEM: 40-1034, 68-3168, 57-2696, T2696, 57-2697, T2697
BSA / Triumph Gearbox Drain Plug and O Ring - A50/A65 Models + Unit Singles Circa 1968 Original type gearbox drain plug as used on A50/A65 models + early...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.