.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Triumph Bolts & Nuts

bolt1555-B19
£1.75 (£2.10 inc VAT)
OEM: 70-1555, E1555
Triumph Crankcase Halves Top Rear Bolt - Pre Unit Models Circa 1939-62 Top rear crankcase securing bolt as used on pre unit 5T, TR5, T100, 6T, T110, TR6...
+

bolt992-B19
£6.95 (£8.34 inc VAT)
OEM: 70-3812, E3812
Triumph 3TA, 5TA Bottom Engine Stud (1955-60) OEM: 70-3812, E3812
+

bolt-set9948-B14
£59.95 (£71.94 inc VAT)
OEM: 70-1596, E1596, 70-4771, E4771, 70-0327, E327, 70-2982, E2982, 21-1875, S1875, 57-1553, T1553
Triumph Cylinder Head Complete Bolt Set - 650cc Unit Twins to 1970 Complete set of bolts and washers as follows: 1x 70-4771 Centre head bolt - 5/16" x...
+

studset765-B14
£19.95 (£23.94 inc VAT)
OEM: 70-4856, 70-5963, 70-2888, 70-4541, 70-4540, 70-4098, E4856, E5963, E2888, E4541, E4540, E4098, S25-3, S1-51
Triumph Crankcase Bolt Set - Unit 650cc Models Circa 1967-68 Complete set of studs, bolts, nuts and washers suitable for T120 and TR6 models from...
+

screwkit-953M-B9
£37.95 (£45.54 inc VAT)
OEM: E3439, E3437, E3440, E3442, E3438, 70-3439, 70-3437, 70-3440, 70-3442, 70-3438
Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit T110, T120 and TR6 Models From 1960-62 Complete set of engine/gearbox screws suitable for...
+

nut3117-B13
£5.95 (£7.14 inc VAT)
OEM: 70-3117, E3117
Triumph Alternator Rotor Nut - Pre Unit 5T and 6T Models Circa 1953-54 Sleeve nut used to secure the alternator rotor on the shaft. Correct fitment on...
+

nut035-B14
£0.75 (£0.90 inc VAT)
OEM: 21-7051
Alternator Mounting Nut, Manifold Nut, etc - Triumph - 21-7051 Fits the early Triumph pre-unit and other models For mounting the alternator stator on the...
+

bolt3575-B14
£11.95 (£14.34 inc VAT)
OEM: 82-3575, F3575
Triumph Gearbox Pivot Bolt - Pre Unit 500/650cc Models Circa 1954-59 Threaded mounting stud, correct fitment on T100, 6T, T110, T120, TR6 models. Length...
+

bolt3108-B19
£6.95 (£8.34 inc VAT)
OEM: 82-3108, F3108
Triumph Rear Engine Plate to Frame Bolt - Pre Unit 500/650cc Models Circa 1951-59 Frame to lower gearbox bolt, correct fitment on T100, 6T, T110, T120,...
+

stud1680-B19
£3.45 (£4.14 inc VAT)
OEM: 82-1680, F1680
Triumph Lower Frame to Engine Plate Stud - Pre Unit 500/650cc Models Circa 1946-59 Bottom frame to engine mounting stud, correct fitment on T100, 6T,...
+

stud0456-B18
£2.45 (£2.94 inc VAT)
OEM: 57-0456, T456
Triumph Engine Plate / Crankcase Bottom Front Stud - 500/650cc Pre Unit Models From 1946-62 Crankcase bottom front stud - correct fitment on 5T, T100,...
+

enginestud-3980-B13
£1.95 (£2.34 inc VAT)
OEM: E3980, 70-3980
Alternator Mounting Stud - Triumph - 70-3980 Fits the early Triumph pre-unit and other models For mounting the alternator stator on the primary chain...
+

studs602-B18
£10.95 (£13.14 inc VAT)
OEM: 21-1865, S1865, 71-3013, E13013
Triumph Cylinder Base Stud Set - 750cc Models - Circa 1973-82 Correct fitment on Triumph T140 and TR7 models. Set includes 8 cylinder base studs - 4x...
+

stud3523-B14
£2.45 (£2.94 inc VAT)
OEM: 70-3523, E3523
Triumph Grooved Cylinder Base Stud - Pre Unit 500/650cc and Unit 650cc Models Correct fitment on many pre unit twins - 5T, TR5, 6T, T110, TR6, T120 circa...
+

bolt2874-B19
£5.95 (£7.14 inc VAT)
OEM: 70-2874, E2874
Triumph Long Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62 High tensile inner fixing cylinder head bolt as used on alloy...
+

hd-bolt3794-B14
£5.95 (£7.14 inc VAT)
OEM: 70-3794
Triumph T90/T100 Cylinder Head bolt (centre without torque stay) OEM: 70-3794
+

bolt044-B19
£2.90 (£3.48 inc VAT)
OEM: 70-7996
Triumph cylinder head stud OEM: 70-7996
+

enginestud-0839-B18
£3.95 (£4.74 inc VAT)
OEM: 82-0839, F839, F0839
Engine Mounting Stud - Triumph - 82-0839 Fits the early Triumph pre-unit and other models Made in England. OEM: 82-0839, F839, F0839
+

bolt0208-B19
£0.75 (£0.90 inc VAT)
OEM: 14-0208
Triumph Auto Advance Fixing Bolt - T140, TR7, TR65 Models + Other Uses 1/4" UNF Length UH: 2+1/4" (57mm) Length of thread: 3/4" (19mm) OEM: 14-0208
+

bolt-set3797-B14
£67.95 (£81.54 inc VAT)
OEM: 70-0327, E327, 83-2184, F2184, 70-4771, E4771, 70-1596, E1596, 70-2989, E2989, 83-0879, F879, 70-3302, E3302
Triumph T120/TR6 Cylinder Head Bolt and Stud Set - 9 Stud Models from 1963-70 Complete set of bolts, studs washers and nuts as follows: 4x 70-0327, E327...
+

dowel1579-B13
£1.95 (£2.34 inc VAT)
OEM: 70-1579, E1579
Triumph Crankcase Joint Dowel - Pre Unit 350/500/650cc Models Circa 1946-62 Crankcase halves dowel - correct fitment on pre unit twins including: 3T, 5T,...
+

stud3819-B19
£1.75 (£2.10 inc VAT)
OEM: 70-3819, E3819
Triumph Cylinder Base Stud - Unit 350/500cc Models Circa 1959-68 - Longer Type Correct fitment on 3TA, 5TA, T90 and T100 models from 1959-68. Longer...
+

stud0454-B18
£2.45 (£2.94 inc VAT)
OEM: 57-0454, T454
Triumph Gearchange Guide Plate Stud - All Pre Unit + Unit 650cc Models Circa 1939-68 Secures the gearchange quadrant guide plate to the outer gearbox...
+

bolt3552-B13
£3.95 (£4.74 inc VAT)
OEM: 71-3552, E13552
Crankshaft Flywheel Bolt - Triumph T140, TR7 From 1973-1982 Flywheel to crankshaft bolt as used on Triumph 750cc twins - 3 required. Length UH: 1+7/16"...
+

bolt2873-B19
£5.95 (£7.14 inc VAT)
OEM: 70-2873, E2873
Triumph Short Cylinder Head Bolt Set - Pre Unit 500/650cc Alloy Head Models Circa 1951-62 High tensile outer fixing cylinder head bolt as used on alloy...
+

stud1922-B19
£1.75 (£2.10 inc VAT)
OEM: 21-1922, S1922
Triumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74 - Longer Type Correct fitment on unit 350/500cc models -  T90, T100, T100C, T100R,...
+

stud3820-B19
£1.75 (£2.10 inc VAT)
OEM: 70-3820, E3820
Triumph Cylinder Base Stud - Unit 350/500cc Models Circa 1959-68 - Shorter Type Correct fitment on 3TA, 5TA, T90 and T100 models from 1959-68. Shorter...
+

enginestud-2414-B19
£2.95 (£3.54 inc VAT)
OEM: 82-2414, F2414
Triumph Upper Frame to Engine Plate Mounting Stud - Pre Unit Models Circa 1946-59 Upper frame to engine mounting stud - locates in the boss on the front...
+

nut8763-B13
£0.95 (£1.14 inc VAT)
OEM: 70-8763, E8763
Triumph Alternator Rotor Nut - T150 Trident Models Circa 1968-74 - Long Type Longer type sleeve nut used to secure the alternator rotor on the shaft....
+

stud4123-B13
£2.25 (£2.70 inc VAT)
OEM: 70-4123, E4123
Triumph Alternator Mounting Stud - Pre Unit T110, T120 and TR6 Models Circa 1960-62 Short stud to mount the alternator stator on the primary chaincase....
+

screwkit-951M-B9
£37.95 (£45.54 inc VAT)
OEM: E1049, E427, E2691, T452, E573, 70-1049, 70-0427, 70-2691, 57-0452, 70-0573
Triumph Chaincase / Gearbox / Timing Cover Screw Kit - Pre Unit Dynamo Models Circa 1954-55 Complete set of engine/gearbox screws suitable for 5T, T100,...
+

stud1921-B19
£1.75 (£2.10 inc VAT)
OEM: 21-1921, S1921
Triumph Cylinder Base Stud - T90, T100 and TR5T Models Circa 1969-74 - Shorter Type Correct fitment on unit 350/500cc models -  T90, T100, T100C, T100R,...
+

bolt3937-B19
£2.45 (£2.94 inc VAT)
OEM: 70-3937, E3937
Triumph Engine Plates to Crankcase Domed Bolt - Unit 350/500cc Models Circa 1959-63 Front engine plate to crankcase domed head bolt - three required per...
+

bolt-set0074-B14
£72.95 (£87.54 inc VAT)
OEM: 00-0074, 82-5469, 82-6498, 82-5532, 82-3805, 82-3069
Triumph Engine Mounting Stud / Bolt Set - Unit 650cc Models from 1963-67 Engine to frame mounting bolts, studs, spacers and fixings. Suitable for 6T, TR6...
+

enginestud-9495-B13
£9.45 (£11.34 inc VAT)
OEM: 70-9495, E9495
Triumph Alternator Mounting Stator Stud - Unit 350/500cc Models - Circa 1969-72 Stator stud - correct fitment on T90 and T100 models circa 1969-72. Three...
+

screw2162-B19
£1.25 (£1.50 inc VAT)
OEM: 21-2162, S2162
Triumph Gearbox Outer Cover Screw - T140 and TR7 Models Circa 1973-78 Outer gearbox cover to crankcase long cheese head pozi drive screw. Correct fitment...
+

enginestud-6498-B14
£5.95 (£7.14 inc VAT)
OEM: 82-6498, F6498
Triumph Bottom Engine Mounting Stud - Unit 650cc Models Circa 1963-70 Engine to frame lowwer mounting stud as used on T120 and TR6 models up to 1970....
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.