.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Electrical

sw/cover2086-A4
£1.25 (£1.50 inc VAT)
OEM: 60-2086, D2086
Front Brake Cable Stop Switch Cover - Triumph/BSA/Norton Models Circa 1968-74 Rubber sleeve used to cover the In-line front brake cable switch as used on...
+

boot9011-F12
£1.45 (£1.74 inc VAT)
OEM: 54949011, 458658, 421554, 19-0865, 99-0643
Lucas Type Coil / HT Lead Cover Rubber Boot Rubber grommet / shroud as used on standard Lucas 6v and 12v coils. Grooved internal edge to ensure secure...
+

capac045-A15
£20.95 (£25.14 inc VAT)
OEM: LU54170009, 99-0737
Replica Lucas Ignition Capacitor Replica Lucas 2MC Capacitor as fitted to many Classic British Motorcycles Used on battery-less ignitions, where the...
+

horn047
£52.95 (£63.54 inc VAT)
OEM: 54068061, 70175A
12 Volt Lucas 6H Type Horn - Typically Fitted to BSA/Triumph Models From 1958 Onwards 12v 6H replica horn - black satin finish with two spade terminals....
+

dyn-bolt460-A17
£3.95 (£4.74 inc VAT)
OEM: 200227
Dynamo Through Fixing Bolt - Short Type For Lucas E3H and E3N Type Generators One bolt and nut - correct fitment on the shorter E3H and E3N type...
+

o/gauge500
£33.95 (£40.74 inc VAT)
Oil Pressure Gauge - 1+3/4" Diameter With 3/8" Tapered 26 TPI Thread - Liquid Filled Universal fit as required. Polished stainless steel bezel, chrome...
 

fuse1250-A23
£3.45 (£4.14 inc VAT)
OEM: 54190387, 54938986, 19-1250, 19-0969
Lucas Type Inline Fuse Holder - Black With Male/Female Blade Terminal and Sleeve Requires a single 30mm glass fuse (not supplied) - male blade terminal...
+

mag-nut170104-A17
£0.95 (£1.14 inc VAT)
OEM: 170104, LU170104
Magneto Shaft Pinion Securing Nut - 3/8" BSF Plain nut to secure the sprocket on mag/dynos including K2F models. Thread: 3/8" BSF 20TPI Depth: 5/16"...
+

dyn1473-A17
£3.45 (£4.14 inc VAT)
OEM: 19-1473, 10352-54
Dynamo Driven Sprocket Castle Nut - BSA A7/A10 Models Circa 1947-63 + Ariel Huntmaster Slotted castle nut - secures the small dynamo driven sprocket....
+

lit205-lucas
£30.95 (£37.14 inc VAT)
OEM: 58395, 59965, MCH66
Genuine Lucas 5+3/4" Headlamp Shell & Rim - Chrome - 1 Wiring Hole Typically fitted to BSA and Triumph competition models - B40, B44, Firebird...
+

lit206-lucas
£30.95 (£37.14 inc VAT)
OEM: 58395, 59965, MCH66
Genuine Lucas 5+3/4" Headlamp Shell & Rim - Black and Chrome - 1 Wiring Hole Typically fitted to BSA and Triumph competition models - B40, B44,...
+

12N5-3B
£21.95 (£26.34 inc VAT)
OEM: 12N5-3B
12N5-3B 12v 5AH Motorcycle Battery Length: 120mm Width: 60mm Height: 130mm Volts: 12 Other references:  YB5-LB,  DB5L-B Please note:  From...
+

dyn0729-A17
£0.95 (£1.14 inc VAT)
OEM: 67-0729, 67-729, 10349-54
Dynamo Driven Sprocket Lock Washer - BSA A7/A10 Models Circa 1947-63 + Ariel Huntmaster Tab washer - secures the small dynamo driven sprocket under the...
+

fkcoil370-A16
£32.95 (£39.54 inc VAT)
Twin HT Lead 6v Ignition Coil - Universal Use 6 volt twin lead ignition coil typically used on early Japanese bikes with contact breaker points. Also...
+

coil-brack810-A15
£4.45 (£5.34 inc VAT)
OEM: 82-6944, F6944
Ignition Coil Clamp RH Mounting Bracket - Triumph 650cc Models Circa 1966-70 Right hand / timing side coil clamp bracket for use with the smaller coil...
+

coil-brack805-A15
£4.45 (£5.34 inc VAT)
OEM: 82-6943, F6943
Ignition Coil Clamp LH Mounting Bracket - Triumph 650cc Models Circa 1966-70 Left hand / drive side coil clamp bracket for use with the smaller coil clamp...
+

flash3521-061
£5.45 (£6.54 inc VAT)
OEM: 60-3521, 99-1204, 06-2046, 19-1098, 54385091
Flasher Unit Clip For 2 Pin Lucas 12v 35048 Flasher Unit Steel spring clip to secure the flasher unit. Correct fitment on various unit models circa...
+

fkmag437-Pair-A17
£3.45 (£4.14 inc VAT)
OEM: 145074
Lucas K2F Magneto Pick Up Screws Pair of magneto pick up screws - part threaded. Length UH: 1/2" (13.2mm) Head width: 1/4" (6.3mm) Genuine Lucas part....
+

fkmag057-A17
£2.95 (£3.54 inc VAT)
OEM: 410600, 410,600
Lucas Magneto Pick Up Acorn Nut Replacement magneto pick up / HT lead acorn nut. Genuine Lucas part. OEM: 410600 , 410,600
+

fkelectign476-A15
£104.95 (£125.94 inc VAT)
VAPE Electronic Ignition System - 6v Twins - Positive or Negative Earth Designed primarily for 6 volt twin cylinder models with side points to replace an...
+

coil-grom275-A15
£2.95 (£3.54 inc VAT)
OEM: 82-9561, F9561
Ignition Coil Mounting Rubber Grommet - 1+5/8" Diameter Coils Locates in the mounting platform to retain the coil. Suitable for 1+5/8" (41mm) diameter...
+

fkchain-251r-B12
£29.95 (£35.94 inc VAT)
OEM: 110500, 67-0296, 67-296, 29-2199, 10343-54
52 Link Endless Dynamo Chain - BSA A7/A10 + C Group Models + Ariel Huntmaster As used on A7 and A10 models circa 1947-63 + C group models circa 1939-53....
+

dyn4224-A17
£0.45 (£0.54 inc VAT)
OEM: 35-4224, 10345-54
Dynamo Driving Sprocket Lockwasher - BSA A7/A10 Models Circa 1947-63 + Ariel Huntmaster Flat washer - fits between the large dynamo sprocket and the...
+

dyn0721-A17
£12.45 (£14.94 inc VAT)
OEM: 67-0721, 67-721, 10344-54
Dynamo Driving Sprocket - 27T - BSA A7 and A10 Models Circa 1947-63 + Ariel Huntmaster Large dynamo drive sprocket - 27 tooth. Correct fitment on all A7...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.