.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Electrical

reg124L-A8
£34.95 (£41.94 inc VAT)
12v Lucas Regulator/Rectifier - Three Phase - Solid State Economical replacement for Lucas rectifier and zener diode Will work with either negative or...
+

mag433-A17
£2.75 (£3.30 inc VAT)
OEM: LU463114, 463114
Replica Lucas Mag/Dyno Clutch Star Spring Washer Dynamo clutch star friction spring as used in many Lucas magdynos including MO1, MO1L, MN, MS etc. ID:...
+

fksw114-A9
£24.95 (£29.94 inc VAT)
OEM: 31340, LU31340, U39
Replica Lucas U39 Light Switch - Off / Low / High Used with many models that have a DC magneto ignition. Short knob type. Hole size required:...
+

dyn405-split-A17
£4.75 (£5.70 inc VAT)
OEM: 188818, LU188818
Lucas Dynamo Bullet Connectors - Brass Bullet or Split Type - Pack of 6 Bullet connectors for the dynamo and voltage control box. 2 required for the...
 

cap017-A23
£2.95 (£3.54 inc VAT)
Red Spark Plug Cap - Rubber - Non Resistor Plain red rubber spark plug cap. HT lead screws into the end and secured by clip. Recommended for Magneto type...
+

dyn431A-A20
£10.95 (£13.14 inc VAT)
OEM: LU200918, 200918
Replica Lucas E3L Dynamo End Cap / Cover - Wire Exit 11 O'Clock - Top Left Dynamo commutator end cover assembly as used on later E3L dynamos. The cable...
+

dyn431-A20
£10.95 (£13.14 inc VAT)
OEM: LU200902, 200902
Replica Lucas E3L Dynamo End Cap / Cover - 5 O'Clock Wire Exit - Bottom Right Dynamo commutator end cover assembly as used on later E3L dynamos. The...
+

mag203-A17
£19.95 (£23.94 inc VAT)
OEM: C2/117
Norton Magneto mounting plate OEM: C2/117
+

fklens058L
£3.95 (£4.74 inc VAT)
OEM: 60600621, 19-1191, 99-1191, 54581638, L760
Lucas Indicator Lens - Stalk Type - Amber Genuine Lucas lens as used on many Triumph, Norton and BSA models such as T140, Commando and A65 models....
+

wiring-term005
£0.65 (£0.78 inc VAT)
Ignition Coil/Distributor Straight Brass Terminal - Flat Contact Clip On Type Brass push on terminal for distributor coil - flat contact type. Clip on...
+

electign479-A15
£299.95 (£359.94 inc VAT)
Authentic K2F Magneto Housing For Electronic Ignition Systems Replica K2F magneto body designed to disguise the use of a 12v electronic ignition....
+

sw224R-A4
£2.45 (£2.94 inc VAT)
OEM: 82-5983, F5983, 68-9167
Lucas 88SA Ignition/Lighting Switch Retaining Bracket Retaining clip used on rotary type 88SA switch assemblies, fits over the switch body, secured with...
+

fkcond44
£10.95 (£13.14 inc VAT)
OEM: 54441582
Condenser fits: BSA, Triumph. OEM 54441582 BSA C25 1968-70, 440cc Victor Special, B50SS 1971, B50MX 1971-72, P34MX. Triumph Trophy TR25 1968, 750cc...
+

term117
£1.45 (£1.74 inc VAT)
6.30mm Push-On Spade Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term132
£1.45 (£1.74 inc VAT)
5.00mm Insulated Nipple Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term131
£1.45 (£1.74 inc VAT)
5.00mm Insulated Receptacle Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term108
£1.45 (£1.74 inc VAT)
5.30mm Insulated Fork Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

nut3971-B13
£7.95 (£9.54 inc VAT)
OEM: 70-3971, E3971
Alternator Rotor Nut - Triumph T20 Tiger Cub Models From 1959 Onwards To secure the alternator rotor on the shaft. Length UH: 3/4" (19mm) OD: 9/16"...
+

off-coil-105465
£74.95 £68.95 (£82.74 inc VAT)
OEM: 105465, 105-465, 465100, 96 201
PVL Replacement Motoplat Compatible Ignition Coil - 105465 Suitable replacement analogue coil for Motoplat 465100 electronic ignition systems as used in...
+

off-swt990
£6.45 (£7.74 inc VAT)
Universal Waterproof Engine Kill Switch Assembly - Push Button Type Complete assembly suitable for 7/8" handlebars. Waterproof rubber cap protects the...
+

term127
£1.45 (£1.74 inc VAT)
6.30mm Insulated Push-On Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term104
£1.45 (£1.74 inc VAT)
5.30mm Insulated Fork Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

fkref103-A7
£6.45 (£7.74 inc VAT)
OEM: 57161, 60-0691, RER25, 03-4013
REFLECTOR - Triumph / BSA / Norton Lucas type amber reflector with chrome surround for Triumph models including T100, T120 and TR6. Also used on Norton...
+

term121T
£1.55 (£1.86 inc VAT)
6.40mm Ring Terminal For 1.5mm - 2.5mm Cable Supplied in pack of 10 (for 1.5-2.5mm square cable)
+

term102
£1.45 (£1.74 inc VAT)
5.30mm Ring Terminal For .5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term113
£1.45 (£1.74 inc VAT)
6.30mm Blade Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term126
£1.45 (£1.74 inc VAT)
6.30mm Blade Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term106
£1.45 (£1.74 inc VAT)
5.30mm Ring Terminal For 1.5mm - 2.5mm Cable. (for 1.5-2.5mm square cable) Supplied in pack of 10
+

term109
£1.45 (£1.74 inc VAT)
6.30mm Push-On Spade Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term141
£1.55 (£1.86 inc VAT)
6.30mm Insulated Push-On Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term136
£1.45 (£1.74 inc VAT)
4.00mm Insulated Nipple Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

term135
£1.45 (£1.74 inc VAT)
4.00mm Insulated Receptacle Terminal For 0.5mm - 1.5mm Cable. (for 0.5-1.5mm square cable) Supplied in pack of 10
+

mag478-A17
£32.95 (£39.54 inc VAT)
OEM: MDGT, 70-3411, E3411
Lucas/BTH Manual Advance Magneto Pinion / Drive Gear - Pre Unit Triumph Twins - Alloy Correct fitment on many pre-unit twins with Lucas K2F or BTH manual...
+

lamp172-A6
£15.95 (£19.14 inc VAT)
OEM: 60-7448
Triumph Indicator Lamp Assembly - Front or Rear on Late T140 and TSS Models - BMW Type Turn signal indicator unit - stems or fixings not included. Takes a...
+

sw31405
£25.95 (£31.14 inc VAT)
OEM: 31405, LU31405
Clutch/Brake Lever Mounted Dip Switch Assembly - Pre Unit Models Complete lever mounted dip switch assembly as used extensive on various pre unit models...
+

wiring-term004
£1.45 (£1.74 inc VAT)
Bosch Type Distributor Terminal - Straight Stainless Steel - Crimp On Push Fit Type Stainless steel HT terminal to suit Bosch distributor caps with 4mm...
+

eltx-200
£210.00 (£252.00 inc VAT)
Triumph Tiger Cub Electronic Ignition Internal Rotor Stator Kit - All Models Suitable for Triumph T20 Tiger Cub models - adaptor required for pre 1962...
+

fkhorn048L
£104.95 (£125.94 inc VAT)
OEM: HF1234
Lucas Altette Horn - 6 Volt Lucas Altette horn with black cast iron body and chrome plated bezel and domed nuts. Two brass screw terminals. Chrome rim...
+

fkhorn048BL
£104.95 (£125.94 inc VAT)
OEM: HF1234, LUHF1234
Lucas Altette Horn - 12 Volt Lucas Altette horn with black cast iron body and chrome plated bezel and domed nuts. Two brass screw terminals....
+

eltx-200adp
£15.00 (£18.00 inc VAT)
Triumph Tiger Cub Adaptor Sleeve for Electronic Ignition Kit - Pre 1962 Models Rotor adaptor sleeve for use on pre 1962 Triumph T20 Tiger Cub models when...
+

fksw035-A9
£24.95 (£29.94 inc VAT)
OEM: 3444B, 6SA, 19-1125, 19-0867
Lucas 6SA Type Brake Light Switch - BSA A50 and A65 Models Circa 1962-70 Replica Lucas stop light switch complete with rubber wiring boot. The switch...
+

wiring5872-A17
£3.75 (£4.50 inc VAT)
OEM: 70-5872, E5872
Triumph Alternator Lead Sleeve Nut / Cable Guide  - Unit 350/500/650cc Models - Circa 1965-68 Alternator lead cable guide with a BSF thread, correct...
+

fkcont25
£17.95 (£21.54 inc VAT)
OEM: 425219, LU425219
Contact Point Set For Lucas 18D1 and 18D2 Distributor - Many British Twins Circa 1958-62 Fits Lucas 18D1 and 18D2 distributors as fitted to many models...
+

off-ign-single-trial
£249.95 (£299.94 inc VAT)
BSA/Triumph Single PVL Electronic Ignition System - Classic Trials System This genuine PVL digital system will produce a strong reliable spark for easy...
+

off-ign-cub
£224.95 (£269.94 inc VAT)
Triumph Tiger Cub Trials - PVL Electronic Ignition System This genuine PVL digital system will produce a strong reliable spark for easy starting....
+

off-ign-single-mx
£249.95 (£299.94 inc VAT)
BSA/Triumph Single PVL Electronic Ignition System - Pre 1965 Motocross Models This genuine PVL digital system will produce a strong reliable spark for...
+

dyn858-A18
£79.95 (£95.94 inc VAT)
OEM: E3H-RO
6v Dynamo Armature 165mm - E3H-RO Parellel Keyed Shaft Suit E3H-RO, Early motorcycle models As fitted to Lucas E3H Ro Dynamos Length: 165mm with 13mm...
+

horn050
£22.95 (£27.54 inc VAT)
OEM: HF1234A
Lucas Bezel and Domed Nuts For Altette Horn Genuine Lucas chrome plated bezel and domed nuts. Set includes the bezel, six nuts to secure the bezel to the...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.