.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Carburation/Fuel

amal-622/082
£0.45 (£0.54 inc VAT)
OEM: 622/082, 99-0520
Amal Idle and Throttle Stop Friction O Ring - Concentric Carburettors - 622/082 Nitrile O ring seal for throttle adjustment screw, as used on all...
+

600/900-4-kit
£37.95 (£45.54 inc VAT)
Amal 600/900 Concentric Carburettor Repair Kit - 4 Stroke Genuine Amal Carburettor Repair Kit to Overhaul your 600/900 4 Stroke Concentric Carb This...

tappart014-F3
£2.95 (£3.54 inc VAT)
Fuel Tap Filter Replacement - Petrol Tap Filter Plastic fine mesh filter, screws onto the fuel tap Filter diameter approx 10mm Thread diameter approx...
+

cap061-std-F2
£0.75 (£0.90 inc VAT)
OEM: 82-4047
Fuel Tank / Oil Tank Cap 2" Cork Washer External diameter - 1+7/8" (47mm) Internal diameter - 1+5/16 (33mm) OEM: 82-4047, F4047, 75-5109 Available as...
 

tap95-F2
£12.95 (£15.54 inc VAT)
OEM: 60-4511
1/4" x 1/4" Flat Lever Fuel Tap with Indicator Plate & Filter - MAIN OEM: 60-4511 Chrome Plated Supplied with filter and locknut Two position flat...
+

amal-622/153-GA
£7.45 (£8.94 inc VAT)
OEM: 622/153, 622/155
Amal Metal Float Bowl Drain Plug - 600/900 Carburettors Metal Float bowl drain plug, for 6 and 9 Series carburettors Please select option: Standard...
 

amal338
£3.95 (£4.74 inc VAT)
OEM: 376/410, 3/410
Double, push-on, 55 degree, push-on, 5/16'' tubing. For 6 and 9 Series carburettors, and 376/389 Monobloc carbs OEM: 376/410, 3/410
+

fkpipe019
£0.95 (£1.14 inc VAT)
Fuel Pipe 3/16inch (5mm) Bore, Black rubber petrol hose - Reinforced. Sold per 12". (30cm) OD: 7/16" (11.5mm) Price is per foot length.
+

rubb784-E9
£1.00 (£1.20 inc VAT)
Rubber Fuel tank mounting washers for classic Triumph and BSA 500cc and 650cc models (1964-70). OEM: 82-0967
+

Mk1-Float-kit/551
£22.95 (£27.54 inc VAT)
Amal 600/900 Mk1 Stay-up float & Needle Valve Kit Float repair kit for the Concentric Carb. Includes: StayUp float, needle valve, float chamber...
+

tap96-F2
£12.95 (£15.54 inc VAT)
OEM: 60-4512
1/4" x 1/4" Flat Lever Fuel Tap with Indicator Plate - RESERVE OEM: 60-4512 Chrome Plated Supplied with filter and locknut Two position flat lever and...
+

tap729-F3
£7.95 (£9.54 inc VAT)
OEM: 60-7267
1/4" x 1/4" BAP Type Fuel Tap with Filter - RESERVE OEM: 60-7267 BAP type fuel tap as used on Triumph T140 and Norton Commando models, will also...
+

wash3814-E9
£0.95 (£1.14 inc VAT)
OEM: 82-3814, F3814
Triumph Fuel Tank Mounting Cupped Washer - Pre Unit and Unit Models Circa 1963-82 Rubber washer support cup as used to mount the fuel tank on many pre...
+

filt619-F8
£9.45 (£11.34 inc VAT)
OEM: 82-6866
Air Filter Element - Gauze Type Replaces AMAL series 600/900 concentric carburetor filter, Pancake Filters and other similar types Outside diameter 4+5/8"...
+

pipe8592-F3
£0.75 (£0.90 inc VAT)
OEM: 82-8592
9/16" OD Fuel Pipe / Oil Pipe Ferrule To fit 5/16" or 7/16" bore tubing with an outside diameter of 9/16'' (14.3mm) Ideally crimp on to the fuel or oil...
+

fuelfilt-001B-F3
£2.95 (£3.54 inc VAT)
8mm Inline Fuel Filter - Clear Polycarbonate with Micro Mesh - 21mm Diameter A small neat fuel filter with 8mm inlet and outlet. Clear polycarbonate...
+

wash071-F3
£0.75 (£0.90 inc VAT)
5/8" ID Bonded Seals Dowty Washer Suitable for 3/8" BSP Fuel Taps Fuel tap sealing washer with bonded rubber inner section. Suitable for use with 3/8"...
+

amal331
£4.95 (£5.94 inc VAT)
OEM: 376/139, 3/139
Double, push-on, 150 degree, push-on, 5/16'' tubing. For 6 and 9 Series carburettors, and 376/389 Monobloc carbs OEM: 376/139, 3/139

cap026H-F2
£23.95 (£28.74 inc VAT)
OEM: 83-3875, 29-7898,15941, 01-3325
Fuel Tank Cap 2+1/2" Domed - Chrome Premium Quality - UK made Chrome plated and vented OEM: 83-3875, 82-3220, 29-7898, 15941, 01-3325 Replacement...
+

tanksc814-E9
£0.95 (£1.14 inc VAT)
OEM: 82-7888
Tank Badge Screw - Triumph Triumph Tank Badge Screw for T100, T120, T140, T150 models. Chrome plated. Short type : 8mm Price is for ONE screw For...

tappart023-F3
£2.95 (£3.54 inc VAT)
Fuel Tap Gas Nut and Spigot - 7/16" Thread Fuel line to tap spigot and nut with 7/16" BSP thread. Suitable for fuel pipe with a 1/4" internal diameter -...
+

rubb301-E9
£1.95 (£2.34 inc VAT)
OEM: 82-9093, 83-1461, 40-8046, 06-7729, NM19093
Anti-roll rubber for the classic Triumph T140. Also fits BSA and Norton motorcycle models. Also used as seat rubbers. OEM: 82-9093, 83-1461, 40-8046,...
+

adap26-28-30-32
£16.95 (£20.34 inc VAT)
Amal Carburettor Manifold Flange Spacer - 5mm Thick - stud holes 2" apart To fit amal carburettors. Phenolic Spacer 3/16" (5mm) thick Various hole sizes...

amal514
£3.95 (£4.74 inc VAT)
OEM: RKC/514, 376/068, 376/069
Amal Monobloc 375, 376, 389 Carburettor Throttle Adjusting Screw Kit Throttle adjusting screw and spring - idle adjustment As fitted to Amal Monobloc...
+

amalmk1-gk-amal
£4.95 (£5.94 inc VAT)
OEM: 622/208, 622/073, 622/101, 13/163, 622/151, 622/082
Amal Concentric 600/900 Series Mark I Carburetter Gasket Set Gaskets and washers to open and clean or repair any Amal 600 or 900 series MK1 carburettor....
+

rubb906-E9
£3.95 (£4.74 inc VAT)
OEM: 83-4932
Fuel Tank mounting rubber for BSA A65 Oil in frame (1971-73) and all Oil in frame Triumph Twins T120/T140 etc (1971-85). OEM: 83-4932, 83-3021, F13021, F14932
+

amal-adj001
£1.95 (£2.34 inc VAT)
OEM: 4/035, 9/035, 99-1024, 99-7096
Amal Carburettor Cable Adjuster For 600, 900, 276, 376, 389 series Amal carburettors Screws into the top cap to adjust the cable. OEM: 4/035, 9/035,...
+

rubb717-E9
£1.00 (£1.20 inc VAT)
Fuel Tank Mounting Rubber for classic Triumph Pre Oil in Frame (OIF) models. OEM: 82-5228, 82-1813
+

Amal622/172
£3.45 (£4.14 inc VAT)
OEM: 622/172
Amal Tickler Pin Conversion Kit Genuine Amal Carburettor Tickler Pin Conversion Kit for Amal concentric Mk1 OEM: 622/172 Made in England
+

rubb058-A-E9
£1.95 (£2.34 inc VAT)
OEM: 01-4996
Fuel Tank Mounting Rubber for AJS and Matchless motorcycles (Thin). 1/4 inch thick with a 3/8 inch hole. OEM: 01-4996
+

fkamalmonopilot
£6.95 (£8.34 inc VAT)
OEM: 376/076
Amal Monobloc Pilot Jet All genuine AMAL jets are calibrated to a flow rate. The number e.g. 100 indicates that it will flow 100cc`s of fuel in one minute...

amal-premier-pilot
£15.95 (£19.14 inc VAT)
OEM: 622/502
Amal Concentric Mk1 Premier Pilot Jet 622/502 To suit the PREMIER Mark 1 carburettor ONLY All genuine AMAL jets are calibrated to a flow rate. The...

rubb434-E9
£1.45 (£1.74 inc VAT)
Rear Fuel Tank rubber for classic Triumph 500cc and 650cc (1964-69) and classic Triumph Triples (1969-on). OEM: 82-5336
+

tank800B-E9
£2.95 (£3.54 inc VAT)
Norton Featherbed / Triton Wrap Round Frame Type Fuel Tank Mounting Rubber + Universal Use Ribbed rubber petrol tank mounting rubber typically used on...
+

tappart3334/3337-F3
£4.95 (£5.94 inc VAT)
OEM: 82-3334, F3334, 82-3337, F3337, 82-3182, F3182
Fuel Pipe Spigot - Straight Type With 1/4" BSP Gas Nut Straight fuel pipe with chrome plated gas nut suitable for use with 1/4" BSP fuel taps - as used on...
+

wash0002-F3
£0.45 (£0.54 inc VAT)
OEM: 83-0002, F10002
Fuel Tap Steel Sealing Washer - 1/4" BSP Petrol Taps Thin flat steel fuel tap washer which locates between the Dowty washer and tap locknut to ensure a...
+

fkamalconcpilotjet
£3.95 (£4.74 inc VAT)
OEM: 124/026
Amal Concentric Pilot Jet OEM: 124/026 All genuine AMAL jets are calibrated to a flow rate. The number e.g. 100 indicates that it will flow 100cc`s of fuel...

amal236
£3.95 (£4.74 inc VAT)
OEM: 622/086
Float Chamber and Top Screws (set of 4) For AMAL 600 and 900 Carburetters Allen bolts, comes with Allen key. OEM: 622/086
+

rub058-B-E9
£2.25 (£2.70 inc VAT)
OEM: 42-8052
BSA Motorcycles A & B Group, Fuel Tank anti-roll Rubber. Sold in singles. OEM: 42-8052
+

fuelfilt-round-F3
£1.95 (£2.34 inc VAT)
Fuel Filter - Round, Clear Petrol filter Cheap and simple fuel filter. Easy to see if it's clear or dirty. Suit 1/4inch (6mm) bore pipe.
+

fktap068n-F3
£29.95 (£35.94 inc VAT)
1/8" x 1/4" Push-off Pull-on Fuel Tap with Nut, Spigot and Filter - Nickel Plated A high quality nickel plated slide type fuel tap, with stainless steel...
+

fkclip183-F3
£0.65 (£0.78 inc VAT)
Fuel pipe clip 1/2inch - 8-12mm Fuel Pipe Clip 1/2" (8-12mm) Worm Drive Jubilee Clip Type Suit pipe of 1/4" Bore
+

amal376/091
£2.65 (£3.18 inc VAT)
OEM: 376/091
Amal Carb Fuel Banjo Retaining Bolt - 375, 376, 389 Monobloc Carburettors Fits 375, 376 and 389 Monobloc Carburettors. Genuine Amal part - made in...
+

fkamal451
£191.95 (£230.34 inc VAT)
OEM: 930/300
Amal Mk1 Carburettor 900 RH 30mm Right hand, 30mm bore, 4 stroke. Carburettor Range (600/900): 900 Main Jet: 200 Throttle Slide No.: 3 Pilot Jet: Bush...

t/rub173-E9
£2.95 (£3.54 inc VAT)
OEM: 40-8107, 68-8170
BSA Fuel Tank Centre Grommet - Deep Type Fuel tank plug fitted to many BSA models with a central mounting fuel tank. Embossed with the BSA logo. OEM:...
+

amal707
£4.45 (£5.34 inc VAT)
OEM: 376/419,3/419
Double Banjo, 180 degree, push-on, 1/4" tubing. For 600 and 900 Series Amal Mark 1 carburettors and Amal 376, 389 Monobloc carbs. OEM: 376/419,3/419
+

amal622/078
£2.95 (£3.54 inc VAT)
OEM: 622/078, 99-0517
Amal Carb Fuel Banjo Retaining Bolt - 600 and 900 Concentric Carburettors Fits 600/900 Series and Mark II Concentric Carburettors. OEM: 622/078, 99-0517
+

tank8049-E9
£5.45 (£6.54 inc VAT)
OEM: 42-8051, 42-8049
BSA Fuel Tank Support Foam Pad - A50, A65, Unit Singles + A and B Group Models From 1954 Onwards Correct fitment on the following models + universal use...
+

In 2017 we launched our
dedicated classic trials and
motocross section after buying
Sammy Miller Products.

We are pleased to announce
that we have recently
acquired TYOFFROAD.

.