Carburation/Fuel :: Fuel Taps and Parts

CODE: tapart3334-F3

Petrol Fuel Pipe Connector Straight - 82-3334

£3.45 (£4.14 inc VAT)

OEM: 82-3334, F3334

Petrol Fuel Pipe Connector Straight - 82-3334 5/16" diameter pipe No bend Nickel plated Brass OEM: 82-3334, F3334

Quantity:

+ −

CODE: fktappart106-F3

Fuel Tap Cork For Pull On Type Fuel Taps - 3/8"

£0.95 (£1.14 inc VAT)

Fuel Tap Cork For Pull On Type Fuel Taps - 3/8" Normally you will require one cork per tap. Price is for ONE cork Note: These corks are bigger than you...

Quantity:

+ −

CODE: pipe-coupler-126-F3

Fuel Pipe Coupler Joint - for 1/4" Pipe Bore

£8.95 (£10.74 inc VAT)

Fuel Pipe Coupler Joint - for 1/4" Pipe Bore Simple and easy to disconnect your fuel pipe, makes it real easy to take the petrol tank off a bike. Press the...

Quantity:

+ −

CODE: pipe-coupler-128-F3

Fuel Pipe Coupler Joint - for 5/16" Pipe Bore

£8.95 (£10.74 inc VAT)

Fuel Pipe Coupler Joint - for 5/16" (8mm) Pipe Bore Simple and easy to disconnect your fuel pipe, makes it real easy to take the petrol tank off a bike....

Quantity:

+ −

CODE: fktappart051-F3

Fuel Tap Pipe 90 Degree Elbow with Gas Nut - 1/4" (6.35mm)

£9.95 (£11.94 inc VAT)

Fuel Tap Pipe 90 Degree Elbow with Gas Nut - 1/4" (6.35mm) Fuel tap nut and spigot for 90 degree connection Will fit any tap with 1/4" Gas Thread fitting...

Quantity:

+ −

CODE: tappart014-F3

Fuel Tap Filter Replacement

£2.95 (£3.54 inc VAT)

Fuel Tap Filter Replacement - Petrol Tap Filter Plastic fine mesh filter, screws onto the fuel tap Filter diameter approx 10mm Thread diameter approx...

Quantity:

+ −

CODE: tap-part017-F3

Fuel Tap Pipe T Piece with Gas Nut - 1/4" (6.35mm)

£9.95 (£11.94 inc VAT)

Fuel Tap Pipe T Piece with Gas Nut - 1/4" (6.35mm) Fuel tap nut and T Piece spigots for dual connection Will fit any tap with 1/4" Gas Thread fitting...

Quantity:

+ −

CODE: fkwash073-F3

Dowty Washers for Fuel Tap 1/4"

£0.95 (£1.14 inc VAT)

OEM: 70-7351, E7351, 70-6961, E6961

Dowty Washers for Fuel Tap 1/4" Rubber inner section Hole id 1/2" Used for fuel petrol tap seal, also tacho drive seal, and other uses across the range of...

Quantity:

+ −

CODE: tap96-F2

1/4" x 1/4" Flat Lever Fuel Tap with Indicator Plate - RESERVE - OEM: 60-4512

£12.95 (£15.54 inc VAT)

OEM: 60-4512

1/4" x 1/4" Flat Lever Fuel Tap with Indicator Plate - RESERVE OEM: 60-4512 Chrome Plated Supplied with filter and locknut Two position flat lever and...

Quantity:

+ −

CODE: fktap082-F3

1/8" x 7/16" Round Lever Brass Fuel Tap with Filter

£32.95 (£39.54 inc VAT)

1/8" x 7/16" Round Lever Brass Fuel Tap with Filter Good quality brass petrol tap - made in England Two position lever Tap Outlet Thread Diameter:...

Quantity:

+ −

CODE: tap094-F3

1/4" Pull-on Push-off Brass Fuel Tap with Ribbed Shank

£39.95 (£47.94 inc VAT)

1/4" Pull-on Push-off Brass Fuel Tap with Ribbed Shank Good quality brass petrol tap with filter - made in England Two Position 'PULL-0N, PUSH-OFF'...

Quantity:

+ −

CODE: tap080-F3

1/4" x 1/4" Round Lever Brass Fuel Tap no Filter

£32.95 (£39.54 inc VAT)

1/4" x 1/4" Round Lever Brass Fuel Tap without Filter Good quality brass petrol tap - made in England Two position lever Lever has slight taper Tap...

Quantity:

+ −

CODE: fkwash116-F3

Fibre Washers - 10 x 1/4" Gas

£2.95 (£3.54 inc VAT)

Fibre Washers - 10 x 1/4" Gas Suit 1/4" Gas thread for fuel taps. Hole id 1/2" Supplied as 10 washers

Quantity:

+ −

CODE: tap092-STD-F2

1/4" x 1/4" BSP Reserve Fuel Tap - Flat Lever Type with Filter and Locknut - Standard Quality

£10.95 (£13.14 inc VAT)

OEM: 83-2801, F12801, 03-1746

1/4" x 1/4" BSP Reserve Fuel Tap - Flat Lever Type with Filter and Locknut - Standard Quality These taps are generally used on many BSA, Norton and...

Quantity:

+ −

CODE: fktap068n-F3

1/8" x 1/4" Push-off Pull-on Fuel Tap with Nut, Spigot and Filter - Nickel Plated

£29.95 (£35.94 inc VAT)

1/8" x 1/4" Push-off Pull-on Fuel Tap with Nut, Spigot and Filter - Nickel Plated A high quality nickel plated slide type fuel tap, with stainless steel...

Quantity:

+ −

CODE: tap074-F3

1/4" x 1/4" Pull Type Brass Fuel Tap

£34.95 (£41.94 inc VAT)

1/4" x 1/4" Pull Type Brass Fuel Tap Good quality brass petrol tap - made in England Two Position Pull-on, Push-off Slide Type Lever Tap Outlet Thread...

Quantity:

+ −

CODE: fktap086M-F3

3/8" x 7/16" Pull Type Brass Fuel Tap 90 Degree Exit

£33.95 (£40.74 inc VAT)

3/8" x 7/16" Pull-on Push-off Type Brass Fuel Tap with 90 Degree Exit Good quality brass petrol tap with filter - made in England Two Position Pull-on,...

Quantity:

+ −

CODE: pipe3335

Petrol Fuel Pipe 90 degrees - 82-3335

£3.95 (£4.74 inc VAT)

Petrol Fuel Pipe 90 degrees - 82-3335 5/16" diameter pipe 90 degree bend Nickel plated steel pipe, or nickel plated Brass, depending on stock available.

Quantity:

+ −

CODE: pipe3353-F3

Petrol Fuel Pipe 25 degrees - 82-3353

£3.45 (£4.14 inc VAT)

Petrol Fuel Pipe 25 degrees - 82-3353 5/16" diameter pipe 25 degree bend Nickel plated steel pipe pipe spigot

Quantity:

+ −

CODE: fktappart027-F3

Fuel Tap Pipe Spigot for 1/4" Gas Thread Nut

£1.95 (£2.34 inc VAT)

Fuel Tap Pipe Spigot for 1/4" Gas Thread Nut Suitable for 1/4" thread. Requires a nut to attach to the fuel tap - see related products

Quantity:

+ −

CODE: inlinetap09-F3

Fuel Tap In-Line, On/Off

£12.45 (£14.94 inc VAT)

Fuel Tap In-Line, On/Off Fits in line with fuel pipe, simple on/off lever Suit 6mm or 1/4" pipe.

Quantity:

+ −

CODE: tappart118-F3

Fuel Tap Adaptor 1/8" - 1/4"

£3.95 (£4.74 inc VAT)

Fuel Tap Adaptor 1/8" - 1/4" Converts your tap thread from 1/8" (3/8"o.d.) to 1/4" (1/2"o.d).

Quantity:

+ −

CODE: tap728-F3

1/4" x 1/4" BAP Type Fuel Tap with Filter - MAIN - OEM: 60-7266

£7.95 (£9.54 inc VAT)

OEM: 60-7266

1/4" x 1/4" BAP Type Fuel Tap with Filter - MAIN OEM: 60-7266 BAP type fuel tap as used on Triumph T140 and Norton Commando models, will also fit...

Quantity:

+ −

CODE: tap112

12mm Fuel Tap, On-Off-Reserve

£10.45 (£12.54 inc VAT)

12mm Fuel Tap, On-Off-Reserve. Metric 1.0mm thread Right hand outlet Lever for on, off and reserve setting

Quantity:

+ −

CODE: tap114

14mm Fuel Tap, On-Off-Reserve - Right Hand

£10.45 (£12.54 inc VAT)

14mm Fuel Tap, On-Off-Reserve. Metric 1.0mm thread Right hand outlet Lever for on, off and reserve setting

Quantity:

+ −

CODE: tap024

14mm Fuel Tap, On-Off-Reserve - Left Hand

£10.45 (£12.54 inc VAT)

14mm Fuel Tap, On-Off-Reserve. Metric 1.0mm thread Left hand outlet Lever for on, off and reserve setting

Quantity:

+ −

CODE: tap116

16mm Fuel Tap, On-Off-Reserve

£10.45 (£12.54 inc VAT)

16mm Fuel Tap, On-Off-Reserve. Metric 1.0mm thread Right hand outlet Lever for on, off and reserve setting

Quantity:

+ −

CODE: tap118

18mm Fuel Tap, On-Off-Reserve

£10.45 (£12.54 inc VAT)

18mm Fuel Tap, On-Off-Reserve. Metric 1.0mm thread Right hand outlet Lever for on, off and reserve setting

Quantity:

+ −

CODE: fktappart057-F3

Fuel Pipe T Piece - 1/4" Pipe Bore

£5.95 (£7.14 inc VAT)

Fuel Pipe T Piece for 1/4" Pipe Bore Suit 1/4" or 6mm. Standard T piece is chromed. We have a few Brass T piece available, please select if required.

Select Options

CODE: tap098-F3

1/4" x 7/16" Push-on Pull-off Chrome Fuel Tap with Nut & Spigot - UK Made

£35.95 (£43.14 inc VAT)

1/4" x 7/16" Push-on Pull-off Chrome Fuel Tap with Filter, Nut & Spigot A high quality chrome plated two position 'PUSH-ON, PULL-OFF' slide type...

Quantity:

+ −

CODE: tap066-F3

1/4" x 1/4" Push-on Pull-off Fuel Tap with Nut Spigot & Filter - UK Made - Chrome

£35.95 (£43.14 inc VAT)

1/4" x 1/4" Push-on Pull-off Fuel Tap with Nut Spigot and Filter - UK Made - Chrome A high quality chrome plated slide type fuel tap, with filter...

Quantity:

+ −

CODE: tap066n

1/4" x 1/4" Push-on Pull-off Fuel Tap with Nut Spigot & Filter - Nickel Plated

£29.95 (£35.94 inc VAT)

1/4" x 1/4" Push-on Pull-off Fuel Tap with Nut Spigot and Filter - Nickel Plated A nickel plated slide type fuel tap, with stainless steel filter gauze...

Quantity:

+ −

CODE: tap091-STD-F2

1/4" x 1/4" BSP Main Fuel Tap - Flat Lever Type with Filter and Locknut - Standard Quality

£10.95 (£13.14 inc VAT)

OEM: 83-2800, F12800, 03-3155

1/4" x 1/4" BSP Main Fuel Tap - Flat Lever Type with Filter and Locknut - Standard Quality These taps are generally used on many BSA, Norton and...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Fuel Taps and Parts

Account Details

Quick Links

Feked.com

Feked Online