.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Spanners & Tools

spann124
£15.95 (£19.14 inc VAT)
Tube spanner for Triumph 4 speed sprocket nut 1+3/4" Measures 44mm across inside flats. Sometimes it's the only way to get to the sprocket nut! OEM: 61-6061
+

bag9089
£22.95 (£27.54 inc VAT)
OEM: 75-9089
BSA Motorcycle Tool Roll/Pouch - Black with Gold Logo Tool Roll/Bag with Gold BSA Logo Black Vinyl - tie up type tool roll Pouch area measures...
+

tool3188
£27.95 (£33.54 inc VAT)
OEM: 61-3188
BSA Bantam Flywheel Puller/Extractor Tool Correct tool to remove the flywheel on BSA Bantam's fitted with Wipac ignitions. Suitable for all BSA...
+

fktl160
£21.95 (£26.34 inc VAT)
Whitworth Open End Spanners. BSW Set of 6 spanners, complete with storage bag, which can be hung on the wall. 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2
+

tool1229
£21.95 (£26.34 inc VAT)
OEM: 06-3968, 06-1229
Norton Exhaust Nut C Spanner Tool Essential for tightening the exhaust manifold nut onto the head For use on all Norton Commando 750 and 850cc Models,...
+

nippleinsert-x1
£6.95 (£8.34 inc VAT)
Brake Caliper Nipple sheared off? This will solve your problem! Nipple Therapy is at hand to repair the damage and fit a new nipple in under five minutes....
 

tool3760
£9.95 (£11.94 inc VAT)
OEM: 61-3760
Triumph / BSA Clutch Locking Plate Tool - 3 or 4 Spring Clutch Correct tool to lock up the clutch when you want to remove the flywheel nuts or clutch...
+

shockwrench-small
£7.95 (£9.54 inc VAT)
Shock Absorber Adjuster Tool - Small For adjusting the spring tension on shock absorbers Different size at each end: 38-45mm 45-52mm
+

t-lev006
£9.45 (£11.34 inc VAT)
15" (38cm)Tyre lever made from quality forged steel. With Curved End
+

spann125
£15.95 (£19.14 inc VAT)
Tube spanner for Triumph 5 speed sprocket nut 1 7/8" Measures 48mm across inside flats.
+

tool-ofw65
£8.95 (£10.74 inc VAT)
Spin-On Oil Filter Cap Wrench - 65mm to 80mm Diameter With 14 or 15 Flutes Oil filter cap wrench available in a range of sizes to suit most common...
 

impactdrvr-173
£12.95 (£15.54 inc VAT)
Impact Driver Set - With Bits and Case Impact screwdriver for loosening over-tightened or corroded screws. Reversible, to firmly tighten screws and nuts....
+

tool7023
£10.95 (£13.14 inc VAT)
OEM: 61-7023, 60-0782
Triumph/BSA Advance and Retard Extractor Tool Made in England OEM: 61-7023, 60-0782
+

tool0220
£12.95 (£15.54 inc VAT)
OEM: 60-0220, D220
Triumph Combination Fork Spanner - Pre Unit + 500/650cc Unit Models - Circa 1950-68 Double ended fork stanchion top nut, bottom damper nut and oil seal...
+

fkchkit
£31.95 (£38.34 inc VAT)
Chain Cutter & Riveter Kit - Heavy Duty Chain Tool Heavy duty chain cutter and riveter - Fits most drive chains Contains: Rivet tips - 2.2, 2.9, 3.8...
+

tool0779
£12.95 (£15.54 inc VAT)
OEM: 60-0779, D779
Fork Stanchion Top Nut Spanner / Wrench - 1+5/16" and 1+1/2" Double ended fork top nut spanner for use on many models Overall length: 8+1/2" (21.4cm)...
+

fork-puller-kit-511
£56.95 (£68.34 inc VAT)
Fork Tube Puller Kit with 7 Plugs and Case Includes 7 different threaded plugs, allowing you to use this single tool to reinstall the fork legs. Suitable...
+

tool3362
£10.95 (£13.14 inc VAT)
OEM: 61-3362
BSA Clutch Hub Extractor / Puller - Internal Thread - Single Spring or 6 Spring Clutch Clutch hub extractor tool suitable for many models with a six...
+

tool521-T13
£13.45 (£16.14 inc VAT)
Stainless Steel Top Dead Centre (TDC) Timing Tool - Dual Thread - Triumph This crankshaft lock tool is for early Unit Triumphs 1963 up to and...
+

fk_lckplier
£19.95 (£23.94 inc VAT)
Safety Lock Wire Pliers 9" Safety Wire Twisting pliers. Safety wiring remains the most positive and assured method of securing critcal fasteners that must...
+

tool3051
£11.95 (£14.34 inc VAT)
OEM: 01-3051
BSA 4 Size Open Ended Toolkit Spanner - NOS - Genuine BSA Part As supplied in the original tool roll on BSA WD M20/M21 plus other early BSA Models....
+

tool6008
£34.95 (£41.94 inc VAT)
OEM: Z23, 61-6008
Triumph Tappet Guide Block Drift Tool - Unit and Pre Unit 500/650cc Twins + 750cc Triples Suitable for all OHV Triumph two and three cylinder models...
+

tool3276
£36.95 (£44.34 inc VAT)
OEM: 61-3276, 61-6046, 61-1732
Triumph/BSA - Universal Engine Sprocket Extractor Universal engine sprocket puller suitable for Triumph and BSA models - simply screw into the...
+

bag0291
£21.95 (£26.34 inc VAT)
OEM: 60-0291
Triumph Motorcycle Tool Roll/Pouch - Black with Gold Logo Tool Roll/Bag with Gold Triumph Logo Black Vinyl - tie up type tool roll Pouch area measures...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.