Workshop :: Spanners & Tools

CODE: wtf-tool065

Honda Flywheel / Rotor Puller - TLR200, TLR250 and RTL250 Models - All Years

£1.95 (£2.34 inc VAT)

OEM: 07733-0020001

Honda Flywheel / Rotor Puller - TLR200, TLR250 and RTL250 Models - All Years Suitable extraction tool to remove the flywheel on the models listed....

Quantity:

+ −

CODE: tool9114

BSA Pushrod Locating and Alignment Comb/Tool - A10, A7

£2.45 (£2.94 inc VAT)

OEM: 67-9114

BSA Pushrod Locating and Alignment Comb/Tool - A10, A7 The correct tool for use on BSA 500/650cc twins OEM: 67-9114

Quantity:

+ −

CODE: pliers123-T8

7" Combination Pliers - Moulded Plastic Handles + Slip Guards

£2.45 (£2.94 inc VAT)

7" Combination Pliers - Moulded Plastic Handles + Slip Guards Cheap and cheerful but sturdy. A useful addition to any toolbox... these versatile pliers...

Quantity:

+ −

CODE: saw222-T8

Junior Hacksaw - Fine Tooth 6" Blade

£2.95 (£3.54 inc VAT)

Junior Hacksaw - Fine Tooth 6" Blade Cheap and cheerful but will get the job done. A useful addition to any toolbox... ideal for precise cutting or for...

Quantity:

+ −

CODE: timingdisc-T13

Engine Timing Disc - Degrees of crankshaft rotation

£2.99 (£3.59 inc VAT)

Engine Timing Disc - Degrees of crankshaft rotation A must for the tool box of any motorcycle enthusiast. To help set up ignition timing, or camshaft...

Quantity:

+ −

CODE: tool7013

Triumph/BSA Points Seal Guide Tool - UNF Thread - 500/650/750cc Twins from 1968 Onwards

£5.95 (£7.14 inc VAT)

OEM: 61-7013

Triumph/BSA Points Seal Guide Tool - UNF Thread - 500/650/750cc Twins from 1968 Onwards For use when refitting the timing cover to prevents seal lip...

Select Options

CODE: tool223

Triumph Open Square Type Tappet Adjustment Spanner

£3.95 (£4.74 inc VAT)

OEM: 60-2184, D2184

Triumph Open Square Type Tappet Adjustment Spanner Fits all square tappet adjusters Holds tappet adjuster while you tighten locknut OEM: 60-2184,...

Quantity:

+ −

CODE: tool8001

Triumph T140 Points Seal Guide Tool - Left Hand Thread - 1985 Models Onwards

£3.95 (£4.74 inc VAT)

OEM: 61-8001

Triumph T140 Points Seal Guide Tool - Left Hand Thread - 1985 Models Onwards For use when refitting the timing cover to prevents seal lip damage. This...

Quantity:

+ −

CODE: tool7019H

Triumph Rocker Spindle O Ring Guide Tool - All Pre Unit + Unit 650/750cc Models

£3.95 (£4.74 inc VAT)

OEM: 61-7019

Triumph Rocker Spindle O Ring Guide Tool - All Pre Unit + Unit 650/750cc Models Can be used on all pre-unit models + 650/750cc twins + 750cc triples....

Quantity:

+ −

CODE: tool9246

BSA Tappet and Carburettor Adjusting Combined Spanner - A, B and C Group Models Circa 1949-63

£3.95 (£4.74 inc VAT)

OEM: 65-9246

BSA Tappet and Carburettor Adjusting Combined Spanner - A, B and C Group Models Circa 1949-63 Double ended combination tool suitable for A7, A10, B31,...

Quantity:

+ −

CODE: t-lever

Tyre Lever - Alloy Steel - 240mm

£4.95 (£5.94 inc VAT)

9+1/2" (240mm) Tyre lever made from quality forged steel.

Quantity:

+ −

CODE: t/valv-tool003-T14

Schrader Tyre Valve 4 Way Maintenance Tool - Core Extractor and Thread Repair

£4.95 (£5.94 inc VAT)

Schrader Tyre Valve 4 Way Maintenance Tool - Core Extractor and Thread Repair Complete assembly with two thread restorers, valve core remover and reamer...

Quantity:

+ −

CODE: plug-tool363

4 Piece Spark Plug Socket Set - 16mm, 18mm and 21mm Sockets + 3/8" Swivel Drive T-Bar Handle

£4.95 (£5.94 inc VAT)

4 Piece Spark Plug Socket Set - 16mm, 18mm and 21mm Sockets + 3/8" Swivel Drive T-Bar Handle Set of three single hex spark plug socket spanners with...

Quantity:

+ −

CODE: thread-gauge

Screw Thread pitch Gauge - Imperial & Metric

£5.45 (£6.54 inc VAT)

Screw Thread pitch Gauge - Imperial & Metric 0.25 - 6mm 4 - 62BSW 52 leaves of measurement variations Useful tool to check the thread TPI on your nuts...

Quantity:

+ −

61-7012, 60-2108, 60-0496, D2108, D496 - Triumph/BSA Primary Chain Adjuster Tool

CODE: tool7012

Triumph/BSA Primary Chain Adjuster Tool - Unit 350/500/650/750cc Models

£5.45 (£6.54 inc VAT)

OEM: 61-7012, 60-2108, 60-0496, D2108, D496

Triumph/BSA Primary Chain Adjuster Tool - Unit 350/500/650/750cc Models Primary chain tensioner screwdriver for use on many unit Triumph and BSA single...

Quantity:

+ −

CODE: lckwire2

Safety Locking Wire 0.7mm

£5.95 (£7.14 inc VAT)

Safety Locking Wire Coil of Lock Wire 0.7mm, approx 30m length. For locking and securing fasteners.

Quantity:

+ −

CODE: rimprotect-T14

Wheel Rim Protectors

£5.95 (£7.14 inc VAT)

Wheel Rim Protectors For tyre changing, used to protect the rims from damage with the tyre levers. Supplied as a Pair, with connecing cord.

Quantity:

+ −

CODE: pipe-clamp-tool-224-T3

Clamp Pliers - Double Ear Pipe Clip

£5.95 (£7.14 inc VAT)

Clamp Pliers - Double Ear Pipe Clip Suitable to use for the fuel pipe clips that require crimping. Simply crimp the ears on the clip to secure on the...

Quantity:

+ −

CODE: tool076-T9

Piston Ring Pliers - 50-100mm

£5.95 (£7.14 inc VAT)

Piston Ring Pliers - 50-100mm Piston ring pliers to remove and mount piston rings easily and quickly, without damaging the rings. For use on pistons from...

Quantity:

+ −

CODE: tool021

Allen / Hex Key Set - Metric and AF Sizes - 25 Piece

£5.95 (£7.14 inc VAT)

Allen / Hex Key Set - Metric and AF Sizes - 25 Piece Heat treated carbon steel long series AF and standard series metric allen / hex keys. Supplied...

Quantity:

+ −

CODE: plug-tool242

3 Piece Thin Wall Spark Plug Socket Set - 14mm, 16mm and 18mm - 3/8" Drive

£5.95 (£7.14 inc VAT)

3 Piece Thin Wall Spark Plug Socket Set - 14mm, 16mm and 18mm - 3/8" Drive Set of spark plug socket spanners with thin walls to fit narrow spark plug...

Quantity:

+ −

CODE: spokewre1

1PC Spoke Wrench Spanner

£6.95 (£8.34 inc VAT)

1 Piece Spoke Wrench Spanner Sizes 1, 2, 3, 4, 5 & 6 Sizes 6.4mm to 4.3mm

Quantity:

+ −

CODE: nippleinsert-x1

Brake Caliper Nipple Insert

£6.95 (£8.34 inc VAT)

Brake Caliper Nipple sheared off? This will solve your problem! Nipple Therapy is at hand to repair the damage and fit a new nipple in under five minutes....

Options

Save 30%

CODE: ring-compress-334

Piston ring compressor 50-125mm

£9.95 £6.95 (£8.34 inc VAT)

Piston ring compressor 65-70mm Comes with square tool to wind up ratchet. Ratchet Type Makes Compressing And Inserting Piston Rings Very Easy Stainless Steel...

Quantity:

+ −

CODE: lckwire13

Safety Locking Wire Washer Kit - 18 Washers - M6, M8, M10

£6.95 (£8.34 inc VAT)

Safety Locking Wire Washer Kit - 18 Washers - M6, M8, M10 Pack of Safety Lock Wire Washers - Six each of M6, M8 and M10 Thread Sizes Install under bolt...

Quantity:

+ −

CODE: off-tool002

Ossa/Maico Flywheel Puller/Extractor Tool - Motoplat Ignition - M27 x 1.25mm Right Hand Thread

£6.95 (£8.34 inc VAT)

Ossa/Maico Flywheel Puller/Extractor Tool - Motoplat Ignition - M27 x 1.25mm Right Hand Thread Suitable for Ossa and Maico models fitted with Motoplat...

Quantity:

+ −

CODE: tool514

Stainless Steel Points Seal Tool - Triumph 500/650cc Unit Twins from 1963-67

£7.45 (£8.94 inc VAT)

Stainless Steel Points Seal Tool - Triumph 500/650cc Unit Twins from 1963-67 For use when refitting the timing cover to prevents seal lip damage. This...

Quantity:

+ −

60-0527, D527 - Triumph Lower Fork Bush/Bearing Nut Removal Tool - Pre Unit and Unit Twins

CODE: tool577

Triumph Lower Fork Bush/Bearing Nut Removal Tool - Unit 500/650/750cc Twins and Triples

£7.45 (£8.94 inc VAT)

OEM: 60-0527, D527

Triumph Lower Fork Bush/Bearing Nut Removal Tool - Pre Unit and Unit Twins Tool with four tabs to remove and install the lower fork bearing nuts....

Quantity:

+ −

CODE: tool103

Piston ring compressor 60-65mm

£7.95 (£9.54 inc VAT)

Piston ring compressor 60-65mm To compress the piston rings on the piston when inserting into the cylinder barrel.

Quantity:

+ −

CODE: tool104

Piston ring compressor 65-70mm

£7.95 (£9.54 inc VAT)

Piston ring compressor 65-70mm

Quantity:

+ −

CODE: tool105

Piston ring compressor 75-80mm

£7.95 (£9.54 inc VAT)

Piston ring compressor 75-80mm To allow you to compress the piston rings when inserting the piston into the cylinder barrel Suitable for one piston between...

Quantity:

+ −

CODE: tool517

Stainless Steel Cylinder Head Torque Tool - Triumph

£7.95 (£9.54 inc VAT)

Stainless Steel Cylinder Head Torque Tool Fits late Triumph 650cc/750cc twins, fitted with Hexagonal head cylinder bolts. Perfect tool for torquing down...

Quantity:

+ −

CODE: shockwrench-small

Shock Absorber Adjuster Tool - Small

£7.95 (£9.54 inc VAT)

Shock Absorber Adjuster Tool - Small For adjusting the spring tension on shock absorbers Different size at each end: 38-45mm 45-52mm

Quantity:

+ −

CODE: tool110

Piston ring compressor 70-75mm

£7.95 (£9.54 inc VAT)

Piston ring compressor 70-75mm

Quantity:

+ −

CODE: tool298

Automatic Self Adjusting Wire Stripping and Crimping Tool

£7.95 (£9.54 inc VAT)

Automatic Self Adjusting Wire Stripping and Crimping Tool Useful tool to strip, crimp and cut wire cleanly and efficiently. These spring loaded pliers...

Quantity:

+ −

CODE: pliers215-T5

Set of 3 Side Cutter Pliers - 6", 8" and 10" + Canvas Tool Roll

£7.95 (£9.54 inc VAT)

Set of 3 Side Cutter Pliers - 6", 8" and 10" + Canvas Tool Roll Cheap and cheerful but sturdy. A useful addition to any workshop, a set of three wire...

Quantity:

+ −

CODE: tool526

Chaincase Plug / Cap Removal and Inspection Tool - Universal Use

£7.95 (£9.54 inc VAT)

Chaincase Plug / Cap Removal and Inspection Tool - Universal Use Three way tool for the removal and inspection of slotted type chaincase plugs as used on...

Quantity:

+ −

CODE: fkbrakebleed01

Brake Bleeding Assistor Kit

£8.95 (£10.74 inc VAT)

Brake Bleeding Assistor Kit Brake bleeding assistor kit utilises a compact unit with 1-way valve and connector hoses that simply attach onto the bleed...

Quantity:

+ −

CODE: fkvernstd

Vernier Caliper Gauges - Standard

£8.95 (£10.74 inc VAT)

Vernier Caliper Gauges - Standard Stainless steel caliper, 0-150mm measurement

Quantity:

+ −

CODE: tool524

Valve Guide Drift Tool 5/16" (8mm) - Norton, BSA, Triumph

£8.95 (£10.74 inc VAT)

Valve Guide Drift Tool 5/16" (8mm) - Norton, BSA, Triumph A stepped tool providing a safe and easy way to remove and install valve guides without...

Quantity:

+ −

CODE: punch104-T5

Gasket Hole Punch Set - Paper & Cork - 12 Piece from 3mm to 19mm

£8.95 (£10.74 inc VAT)

Gasket Hole Punch Set - Paper & Cork - 12 Piece from 3mm to 19mm Heat treated, high quality carbon steel with k nurled bodies for a secure grip....

Quantity:

+ −

CODE: 1-4-unf-tap-Set-178

1/4" UNF Thread Tap Set, 3 piece

£8.95 (£10.74 inc VAT)

1/4" UNF Thread Tap Set, 3 piece Imperial UNF Thread - 1/4 inch - 3 piece tap set Includes the Taper Tap, Second Tap (or intermediate Tap), and Bottoming Tap...

Quantity:

+ −

CODE: wtf-tool003

Flywheel Puller/Extractor Tool - M27 x 1.0mm LH Thread - Yamaha TY Models + Others

£8.95 (£10.74 inc VAT)

OEM: 07933-0010000, 57001-252, 09930-30113, YM-01189

Flywheel Puller/Extractor Tool - M27 x 1.0mm LH Thread - Yamaha TY Models + Others Suitable for many models requiring a 27mm x 1.0mm left hand thread...

Quantity:

+ −

Spin-On Oil Filter Cap Wrench - 65mm - 14 Flute

CODE: tool-ofw65

Spin-On Oil Filter Cap Wrench - 65mm to 80mm Diameter With 14 or 15 Flutes

£8.95 (£10.74 inc VAT)

Spin-On Oil Filter Cap Wrench - 65mm to 80mm Diameter With 14 or 15 Flutes Oil filter cap wrench available in a range of sizes to suit most common...

Options

CODE: fkvernstd-88

Vernier Caliper Gauges - Standard

£8.95 (£10.74 inc VAT)

Vernier Caliper Gauges - Standard Stainless steel caliper, 0-150mm measurement

Quantity:

+ −

CODE: fkfeeler01

Feeler Gauge Set - mm/inch

£9.45 (£11.34 inc VAT)

Feeler Gauge Set - mm/inch Set of Feeler Gauges, 26 blades, in Metric and Imperial, mm and inches.

Quantity:

+ −

CODE: t-lev006

Tyre Lever - Alloy Steel - Curved 15"

£9.45 (£11.34 inc VAT)

15" (38cm)Tyre lever made from quality forged steel. With Curved End

Quantity:

+ −

CODE: tool3774

BSA /Triumph Clutch Locking Plate/Tool - Unit Singles

£9.45 (£11.34 inc VAT)

OEM: 61-3774

BSA /Triumph Clutch Locking Plate/Tool - Unit Singles The correct tool to lock up the clutch when you want to remove the flywheel nuts or clutch main...

Quantity:

+ −

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Spanners & Tools

Account Details

Quick Links

Feked.com

Feked Online