.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Workshop

tool7023
£10.95 (£13.14 inc VAT)
OEM: 61-7023, 60-0782
Triumph/BSA Advance and Retard Extractor Tool Made in England OEM: 61-7023, 60-0782
+

lckwire13
£6.95 (£8.34 inc VAT)
Safety Locking Wire Washer Kit - 18 Washers - M6, M8, M10 Pack of Safety Lock Wire Washers - Six each of M6, M8 and M10 Thread Sizes Install under bolt...
+

bag9089
£22.95 (£27.54 inc VAT)
OEM: 75-9089
BSA Motorcycle Tool Roll/Pouch - Black with Gold Logo Tool Roll/Bag with Gold BSA Logo Black Vinyl - tie up type tool roll Pouch area measures...
+

bag0291
£21.95 (£26.34 inc VAT)
OEM: 60-0291
Triumph Motorcycle Tool Roll/Pouch - Black with Gold Logo Tool Roll/Bag with Gold Triumph Logo Black Vinyl - tie up type tool roll Pouch area measures...
+

roll-B29
£31.95 (£38.34 inc VAT)
OEM: 75-9089
BSA Motorcycle Service Tool Roll - Black with Gold Logo Service Tool Roll with Gold BSA Logo Black Vinyl - tie up type tool roll 8 Tool Slots Folded...
+

roll-B29B
£28.95 (£34.74 inc VAT)
OEM: 75-9089
Triumph Motorcycle Service Tool Roll - Black with Gold Logo Service Tool Roll with Gold Trumph Logo Black Vinyl - tie up type tool roll 8 Tool Slots...
+

tool6019
£62.95 (£75.54 inc VAT)
OEM: 61-6019, 06-7524, A121
Triumph/Norton/BSA Crankshaft Pinion Extractor Puller Tool Three jaws that lock at the bottom of the gear to extract it. Will pull the crankshaft...
+

tool3362
£10.95 (£13.14 inc VAT)
OEM: 61-3362
BSA Clutch Hub Extractor / Puller - Internal Thread - Single Spring or 6 Spring Clutch Clutch hub extractor tool suitable for many models with a six...
+

tool223
£3.95 (£4.74 inc VAT)
OEM: 60-2184, D2184
Triumph Open Square Type Tappet Adjustment Spanner Fits all square tappet adjusters Holds tappet adjuster while you tighten locknut OEM:  60-2184,...
+

tool9114
£2.45 (£2.94 inc VAT)
OEM: 67-9114
BSA Pushrod Locating and Alignment Comb/Tool - A10, A7 The correct tool for use on BSA 500/650cc twins OEM: 67-9114
+

tool3188
£27.95 (£33.54 inc VAT)
OEM: 61-3188
BSA Bantam Flywheel Puller/Extractor Tool Correct tool to remove the flywheel on BSA Bantam's fitted with Wipac ignitions. Suitable for all BSA...
+

tool3583
£17.95 (£21.54 inc VAT)
OEM: 61-3583
Clutch Hub Extractor Tool - BSA/Triumph Unit Singles Suitable for Unit Single Models from 1958-73 including: BSA C15, C25, B25, B40, B44, B50, Triumph...
+

tool3760
£9.95 (£11.94 inc VAT)
OEM: 61-3760
Triumph / BSA Clutch Locking Plate Tool - 3 or 4 Spring Clutch Correct tool to lock up the clutch when you want to remove the flywheel nuts or clutch...
+

tool3768/6
£9.95 (£11.94 inc VAT)
OEM: 61-3768
BSA Clutch Locking Plate Tool - 6 Spring Clutch Correct tool to lock up the clutch when you want to remove the flywheel nuts or clutch main nut. Suits...
+

tool3774
£9.45 (£11.34 inc VAT)
OEM: 61-3774
BSA /Triumph Clutch Locking Plate/Tool - Unit Singles The correct tool to lock up the clutch when you want to remove the flywheel nuts or clutch main...
+

nut1302-B14
£0.95 (£1.14 inc VAT)
OEM: 14-1302, 21-1852, S1852
5/16" UNF Self-Locking Cleveloc Nut - Thin Type 5/16" UNF self-locking Cleveloc nut. Thin Type - 24TPI OEM: 14-1302, 21-1852, S1852
+

wash2330
£0.25 (£0.30 inc VAT)
OEM: 60-2330, 60-4247, 54-0055, D4247, D2330
5/16" Plain Washer - Thin Type  - 1/16" Thickness ID: 1/2" (12.8mm) OD: 5/8" (15.7mm) Thickness: 1/16", 0.05" (1.2mm) OEM: 60-2330, 60-4247, 54-0055,...
+

tool8001
£3.95 (£4.74 inc VAT)
OEM: 61-8001
Triumph T140 Points Seal Guide Tool - Left Hand Thread - 1985 Models Onwards For use when refitting the timing cover to prevents seal lip damage. This...
+

mug-AJS
£5.95 £4.45 (£5.34 inc VAT)
AJS Mug - Blue with Silver Logo Mug for drinking tea or possibly coffee, must be used with cake or biscuits. Please note: Cake or biscuits not included...
+

wash2441
£0.95 (£1.14 inc VAT)
OEM: 70-2441, 60-7132, E2441, D7132
1/4" (6.35mm) Annealed Copper Washer - Various Applications ID: 1/4" (6.35mm) OD: 7/16" (11mm) OEM: 70-2441, 60-7132, E2441, D7132
+

bolt020-B19
£0.45 (£0.54 inc VAT)
2" Long x 1/4" CEI Hexagonal Bolt - Part Threaded 3/4" thread, 1+1/4" non-thread 26 TPI 1/4" CEI thread
+

bolt091-B19
£0.45 (£0.54 inc VAT)
OEM: 14-0201
1" Long x 1/4" UNC - Hexagonal Bolt -Part Threaded 3/4" thread, 1/4" non-thread OEM: 14-0201
+

tool0779
£12.95 (£15.54 inc VAT)
OEM: 60-0779, D779
Fork Stanchion Top Nut Spanner / Wrench - 1+5/16" and 1+1/2" Double ended fork top nut spanner for use on many models Overall length: 8+1/2" (21.4cm)...
+

tool172
£14.95 (£17.94 inc VAT)
Three Piece Bearing Puller Kit - 3", 4" and 6" Heights 3 pullers with reversible claw legs for internal and external pulls. Chrome plated drop forged...
+

nut1303-B14
£1.45 (£1.74 inc VAT)
OEM: 14-1303, 06-3024
3/8" UNF Self-Locking Cleveloc Nut - Thin Type 3/8" UNF self-locking Cleveloc nut. Thin Type - 24TPI OEM: 14-1303, 06-3024
+

wash1575-B13
£0.75 (£0.90 inc VAT)
OEM: 70-1575, 40-0158, E1575, 40-158
Triumph/BSA Rocker Spindle Thrust Washer - Various Models As used on many BSA models including A7, A10,  A50, A65, B25, B44, B40 and C15. Plus...
+

wash1346-E2
£1.25 (£1.50 inc VAT)
OEM: 03-1346, 83-2901, 60-3541, D3541, S26-16
BSA/Triumph - 1/2" Thackeray Double Spring Washer - Various Uses - Centre Stand, Brake Pedal Correct fitment for many BSA centre stands. Triumph brake...
+

tool3700-T2
£1.95 (£2.34 inc VAT)
Wire Brush With Grip Handle and Crimped Brass Plated Bristles Brass plated crimped wire brush ideal for rust removal and general cleaning. The curved...
+

tool3400-T2
£4.45 £3.95 (£4.74 inc VAT)
Set of 6 Cleaning Brushes - Wire, Nylon and Brass  6 piece brush set ideal for cleaning and rust removal 2x Brass Head - cleaning 2x Steel Head - rust...
+

Fedox-1L
£29.95 (£35.94 inc VAT)
FEDOX Rust Remover - 1 Litre - Rust Remover Concentrate Fedox is an effective and safe rust remover for removing rust from tanks, or any components that...
+

sealeater-1L
£21.95 (£26.34 inc VAT)
SEALEATER Fuel Tank Sealant Remover - 1 Litre For removing old fuel tank sealer prior to re-sealing. This product will remove sealants based on...
+

tool514
£7.45 (£8.94 inc VAT)
Stainless Steel Points Seal Tool - Triumph 500/650cc Unit Twins from 1963-67 For use when refitting the timing cover to prevents seal lip damage. This...
+

unf-nut0404-B14
£0.35 (£0.42 inc VAT)
OEM: 14-0404
7/16" UNF - Thin Type Hexagonal Locking Nut - 14-0404 Universal uses OD: 11/16" (17.4mm) Width: 1/4" (6.5mm) OEM: 14-0404
+

tool9254
£11.95 (£14.34 inc VAT)
OEM: 29-9254
BSA Hub Bearing Adjusting Spanner - NOS - Genuine BSA Part As supplied in the original tool roll on BSA WD M20/M21 plus other early BSA Models. This is...
+

tool9068
£9.95 (£11.94 inc VAT)
OEM: 66-9068
BSA Detachable Wheel Spanner - NOS - Genuine BSA Part As supplied in the original tool roll on BSA WD M20/M21 plus other early BSA Models. This is an...
+

wash8343
£0.75 (£0.90 inc VAT)
OEM: 42-8343
Fibre Washer - 1+1/4" - BSA Oil Tank Filter Washer + Universal Uses Correct part for BSA A & B Models, C10L, C12 - oil tank filter washer OD: 1+1/4"...
+

tool3051
£11.95 (£14.34 inc VAT)
OEM: 01-3051
BSA 4 Size Open Ended Toolkit Spanner - NOS - Genuine BSA Part As supplied in the original tool roll on BSA WD M20/M21 plus other early BSA Models....
+

nut0152-B14
£3.45 (£4.14 inc VAT)
OEM: 15-0152, 15-152, NM16187, 06-7664
7/16" x 20 TPI Nut  - BSA M20 & M21 Cylinder Base Nut + Norton Bottom Yoke Nut Height: 7/16" (10.8mm) OEM:  15-0152, 15-152, NM16187, 06-7664
+

M8-bolt+nut-pack10
£3.25 £2.45 (£2.94 inc VAT)
OEM: 14-0220
M8 Metric Bolts & Nuts - 40mm Hexagonal bolt - Set Screw with Nyloc Nut - x10 8mm metric thread 40mm of thread, with a Nyloc locking nut. BZP - Bright...
+

badge97ZD-T7
£3.25 (£3.90 inc VAT)
AJS Logo Shoulder Badge - Embroidered Cloth Patch - Black/Gold To sew on your shirt, cap or jacket. Length: 4+9/16" (116mm) Height: 1+5/16" (34mm)
+

charger-01
£45.95 (£55.14 inc VAT)
12V 800 mA Waterproof Battery Charger / Maintainer Suitable for all lead acid batteries - AGM, Flooded or Gel (not Lithium). This battery charger is...
+

wash2594-B13
£0.75 (£0.90 inc VAT)
OEM: 70-2594, E2594
Triumph Rocker Spindle Thrust Washer - T20 Tiger Cub OD: 5/8" (15.8mm) ID: 3/8" (9.8mm) Thickness: 1/32" (0.8mm) OEM: 70-2594, E2594
+

badge97ZF-T7
£3.25 (£3.90 inc VAT)
Ariel Logo Shoulder Badge - Embroidered Cloth Patch - Black/Gold To sew on your shirt, cap or jacket. Length: 4+9/16" (116mm) Height: 1+5/16" (34mm)
+

book473-T9
£19.95 (£23.94 inc VAT)
Parts Manual for Triumph 650cc models, including: Thunderbird 6T, Trophy TR6, Bonneville T120 (1966) eng. no: D024875+ Please see photo for full details
+

book471-T9
£11.95 (£14.34 inc VAT)
Parts Manual for Triumph 650cc models, including: T120R, T120RV, Tiger 650, TR6R, TR6C (1972) Please see photo for full details OEM: 99-0953
+

s-glue20
£1.67 (£2.00 inc VAT)
Industrial Strength Super Glue - Medium Viscosity - 20g Industrial strength medium viscosity formula bonds instantly for a fast set. Bonds a variety of...
+

tool247
£2.45 (£2.94 inc VAT)
8lb Pen Style Magnetic Pick Up Tool - Telescopic Pen style with high visibilty orange fibre handle and pocket clip Extends from 6" (13cm) to 25"...
+

clips184-T2
£3.95 (£4.74 inc VAT)
Circlips - Assorted Metric Sizes - 300 Pieces - 3mm to 32mm The storage box contains 18 popular metric sizes: 20 x 3mm, 10 x 4mm, 15 x 5mm, 25 x 6mm, 15...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.