.

Feked Classic Bike Parts
The Old Racing Stables, Nine Yews, Cranborne, Dorset BH21 5PW, UK

.
.
.

Useful & Interesting

SHIPPING COSTS SHIPPING COSTS

Workshop

fkchwax
£29.95 (£35.94 inc VAT)
Chain Wax - Putoline - Traditional Chain Lubrication - 1kg tin. Chain Wax is a traditional treatment for the lubrication of non O-ring chains. When heated...
+

nut1903-B14
£0.75 (£0.90 inc VAT)
OEM: 14-1903
3/8" UNF Self-Locking Nyloc Nut 3/8" UNF self-locking Nyloc nut. 24TPI OEM: 14-1903
+

washer1880
£0.85 (£1.02 inc VAT)
OEM: 82-1880, F1880
Triumph Copper Sealing Washer - 82-1880 Used in various places on Triumph engines, including the sump bolt washer. OEM: 82-1880, F1880
+

Semi-Fluid-Grease
£12.95 (£15.54 inc VAT)
Semi-Fluid Grease - Tub of 800g - approx 1 litre This semi-fluid grease is a perfect solution to a leaky old gearbox. If you have an old BSA which leaks...
+

spokewre1
£6.95 (£8.34 inc VAT)
1 Piece Spoke Wrench Spanner Sizes 1, 2, 3, 4, 5 & 6 Sizes 6.4mm to 4.3mm
+

fkfeeler01
£9.45 (£11.34 inc VAT)
Feeler Gauge Set - mm/inch Set of Feeler Gauges, 26 blades, in Metric and Imperial, mm and inches.
+

tool9114
£2.45 (£2.94 inc VAT)
OEM: 67-9114
BSA Pushrod Locating and Alignment Comb/Tool - A10, A7 The correct tool for use on BSA 500/650cc twins OEM: 67-9114
+

thread-gauge
£5.45 (£6.54 inc VAT)
Screw Thread pitch Gauge - Imperial & Metric 0.25 - 6mm 4 - 62BSW 52 leaves of measurement variations Useful tool to check the thread TPI on your nuts...
+

nut0124-B14
£3.45 (£4.14 inc VAT)
OEM: 02-0124, 2-124, 27-6716
1/2" x 20 CEI Thin Nut - BSA Camshaft Pinion Nut + Hub Spindle Lock Nut - Various Uses Used to secure the camshaft gear on A7 and A10 models + some early...
+

wash4260
£0.25 (£0.30 inc VAT)
OEM: 60-4260, D4260, 60-2428, D2428, 24-8784, 37-2320, W2320, 54-8003, S26-3
Triumph / BSA - 5/16" Spring Washer - Various Uses On Pre Unit and Unit Models As used extensively on both pre unit and unit models + universal use as...
+

fkpaint01
£6.45 (£7.74 inc VAT)
Black Paint - Cylinder and Exhaust 100ml High Temperature Black Paint, Satin Finish Suitable for Exhaust Systems, Engine Cases, Cylinder Barrels, Heads...
+

bolt094-B19
£1.25 (£1.50 inc VAT)
OEM: 14-0216
1+1/8" Long x 5/16" UNF Hexagonal Bolt Part Threaded. High Tensile 7/8" thread, 1/4" non-threaded section. OEM: 14-0216
+

fkfkoil20
£17.95 (£21.54 inc VAT)
Fork Oil 20WT - 1 litre 1. Outstanding low temperature performance 2. Cold start fluidity and high temperature performance 3. Long stable Oil Life 4....
+

off-tool001
£9.95 (£11.94 inc VAT)
OEM: 11.32-015
Bultaco Flywheel Puller/Extractor Tool - Femsa Ignition - M33 x 1.5mm Right Hand Thread Suitable for all Bultaco models fitted with Femsa ignition plus...
+

Fertan-250
£15.45 (£18.54 inc VAT)
FERTAN Rust Converter - 250ml - Destroy Rust & Prime FERTAN is the optimal treatment for the removal of rust from all metal constructions Use...
+

fkmanhay117-T4
£30.00
BSA Bantam (48 - 71) Haynes Manual Bantam D1 123cc 48 - 62 Bantam D3 148cc 53 - 57 Bantam D5 174cc 57 - 58 Bantam D7 174cc 58 - 66 Bantam D10 174cc 66 -...
+

wash0239
£0.95 (£1.14 inc VAT)
OEM: 40-0239, NE507, 99-3540
Triumph / BSA Fibre Washer - Chaincase Inspection Plug + Gearbox Filler Cap - 1+1/4" Various uses on many single and twins. OD: 1+1/4" (31mm) ID: 1"...
+

3.0mm-cork
£5.00 (£6.00 inc VAT)
Nitrile  Cork Gasket Material - 3.0mm Sheet Available as: 25cm x 25cm Sheet 50cm x 25cm Sheet Nitrile bonded cork has good oil resistance, is...

tool7012
£5.45 (£6.54 inc VAT)
OEM: 61-7012, 60-2108, 60-0496, D2108, D496
Triumph/BSA Primary Chain Adjuster Tool - Unit 350/500/650/750cc Models Primary chain tensioner screwdriver for use on many unit Triumph and BSA single...
+

spann124
£15.95 (£19.14 inc VAT)
Tube spanner for Triumph 4 speed sprocket nut 1+3/4" Measures 44mm across inside flats. Sometimes it's the only way to get to the sprocket nut! OEM: 61-6061
+

fkfob026-T7
£5.45 (£6.54 inc VAT)
Triumph Key Fob - Key Ring Photo shows yellow, but colour may vary depending on stock availability. Sometimes Blue, red, or Green. PLEASE note, if...
+

nut0103-B14
£0.95 (£1.14 inc VAT)
OEM: 37-0103, W103, 40-3226
1/4" x 26 CEI Nut - Various Uses on Pre Unit and Unit Triumph and BSA Models Used extensively for many applications including cylinder head, manifold...
+

bolt096-B19
£0.75 (£0.90 inc VAT)
OEM: 14-0219
1+1/2" Long x 5/16" UNF Hexagonal Bolt Part Threaded. High Tensile 7/8" thread, 5/8" non-thread. OEM: 14-0219
+

fkchlub
£12.95 (£15.54 inc VAT)
Morris Workshop Pro Fully Synthetic Chain Lube - Non-Fling Formula - 400ml Workshop Pro Chain Lubricant Fully Synthetic is a specially formulated fully...
+

Our dedicated classic trials
and motocross section.
Parts available for British,
Japanese & European models.

.

RENNTEC ENGINEERING
Premium quality British made
motorcycle luggage racks,
grab rails and engine bars.
 
.